Spec 30G Misc Accessories
-
Upload
sun-valley-bronze -
Category
Documents
-
view
226 -
download
1
description
Transcript of Spec 30G Misc Accessories
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m30-1
MISCELLANEOUS ACCESSORIES
Revised 02/01/16
CONTENTSThis section contains switch plates & outlet covers, handrail brackets, closet components, gas keys, house numbers, hooks & eyes, hasp latches, slide bolts, gate closers, bells, tack room hardware, boat cleat and fire screen.
TABLE OF CONTENTS:
Switchplate Covers Pages 30-2 – 30-3
Outlet Covers Pages 30-4 – 30-5
Decora Covers Pages 30-6 – 30-8
Misc. & Combination Covers Pages 30-9 – 30-10
Hand Rail Brackets Pages 30-11 – 30-13
Foot Rail Brackets Page 30-14
Newel Post Finial Page 30-15
Stair Nosing Page 30-16
Gas Keys Page 30-17
Gas Key Escutcheon Page 30-18
House Numbers Pages 30-19 – 30-20
House Letters Page 30-21
Hooks & Eyes Page 30-22
Hasp Latches & Slide Bolts Page 30-23
Cannon Ball Gate Closer Page 30-24
Bells Page 30-25
Tack Room Accessories Page 30-26
Boat Cleats Page 30-27
Closet Components Pages 30-28 – 30-29
Closet Brackets Page 30-30
Corner Brackets Pages 30-31– 30-32
Fire Screen Page 30-33
Brochure Rack Page 30-34
Desk Cord Escutcheon Page 30-35
ORDERING INSTRUCTIONS:Miscellaneous Accessories: See Ordering Instructions in Binder 1/ Dealer Information. Custom Miscellaneous Accessories: See Custom Ordering Instructions in Binder 1/ Dealer Information.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-2
Revised 02/01/16
Illustrations are for demonstration purposes only.
Bevel Edge switchplate covers.
EC-101 – EC-104 BEVEL EDGE SWITCHPLATE COVERS
2 3/4"
4 1/
2"
EC-101 – Single switchplate cover.
4 3/4"
4 1/
2"
EC-102 – Two gang switchplate cover.
6 3/4"
4 1/
2"
EC-103 – Three gang switchplate cover.
8 1/4"
4 1/
2"
EC-104 – Four gang switchplate cover.
EC-101 2 3/4” x 4 1/2” Bevel Edge single switchplate cover.
EC-102 4 3/4” x 4 1/2” Bevel Edge 2-gang switchplate cover.
EC-103 6 3/4” x 4 1/2” Bevel Edge 3-gang switchplate cover.
EC-104 8 1/4” x 4 1/2” Bevel Edge 4-gang switchplate cover.
EC-105 10 1/4” x 4 1/2” Bevel Edge 5-gang switchplate cover. (Not shown).
EC-106 12 1/4” x 4 1/2” Bevel Edge 6-gang switchplate cover. (Not shown).
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-3
Revised 02/01/16
Illustrations are for demonstration purposes only.
Contemporary switchplate covers.
EC-9101 – EC-9104 CONTEMPORARY SWITCHPLATE COVERS
2 3/4"
4 1/
2"
EC-9101 – Single switchplate cover.
4 3/4"
4 1/
2"
EC-9102 – Two gang switchplate cover.
6 3/4"
4 1/
2"
EC-9103 – Three gang switchplate cover.
8 1/4"
4 1/
2"
EC-9104 – Four gang switchplate cover.
EC-9101 2 3/4” x 4 1/2” Contemporary single switchplate cover.
EC-9102 4 3/4” x 4 1/2” Contemporary 2-gang switchplate cover
EC-9103 6 3/4” x 4 1/2” Contemporary 3-gang switchplate cover.
EC-9104 8 1/4” x 4 1/2” Contemporary 4-gang switchplate cover.
EC-9105 10 1/4” x 4 1/2” Contemporary 5-gang switchplate cover. (Not shown).
EC-9106 12 1/4” x 4 1/2” Contemporary 6-gang switchplate cover. (Not shown).
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-4
Revised 02/01/16
Illustrations are for demonstration purposes only.
Bevel Edge outlet covers.
EC-201 – EC-204 BEVEL EDGE OUTLET COVERS
2 3/4"
4 1/
2"
EC-201 – Single outlet cover.
4 3/4"
4 1/
2"
EC-202 – Two gang outlet cover.
6 3/4"
4 1/
2"
EC-203 – Three gang outlet cover.
8 1/4"
4 1/
2"
EC-204 – Four gang outlet cover.
EC-201 2 3/4” x 4 1/2” Bevel Edge single outlet cover.
EC-202 4 3/4” x 4 1/2” Bevel Edge 2-gang outlet cover.
EC-203 6 3/4” x 4 1/2” Bevel Edge 3-gang outlet cover.
EC-204 8 1/4” x 4 1/2” Bevel Edge 4-gang outlet cover.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-5
Revised 02/01/16
Illustrations are for demonstration purposes only.
Contemporary outlet covers.
EC-9201 – EC-9204 CONTEMPORARY OUTLET COVERS
2 3/4"
4 1/
2"
EC-9201 – Single outlet cover.
4 3/4"
4 1/
2"
EC-9202 – Two gang outlet cover.
6 3/4"
4 1/
2"
EC-9203 – Three gang outlet cover.
8 1/4"
4 1/
2"
EC-9204 – Four gang outlet cover.
EC-9201 2 3/4” x 4 1/2” Contemporary single outlet cover.
EC-9202 4 3/4” x 4 1/2” Contemporary 2-gang outlet cover.
EC-9203 6 3/4” x 4 1/2” Contemporary 3-gang outlet cover.
EC-9204 8 1/4” x 4 1/2” Contemporary 4-gang outlet cover.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-6
Revised 02/01/16
Illustrations are for demonstration purposes only.
Bevel Edge decora covers.
EC-301 – EC-306 BEVEL EDGE DECORA COVERS
2 3/4"
4 1/
2"
EC-301 – Single decora cover.
4 3/4"
4 1/
2"
EC-302 – Two gang decora cover.
6 3/4"
4 1/
2"
EC-303 – Three gang decora cover.
8 1/4"
4 1/
2"
EC-304 – Four gang decora cover.
EC-301 2 3/4” x 4 1/2” Bevel Edge single decora cover.
EC-302 4 3/4” x 4 1/2” Bevel Edge 2-gang decora cover.
EC-303 6 3/4” x 4 1/2” Bevel Edge 3-gang decora cover.
EC-304 8 1/4” x 4 1/2” Bevel Edge 4-gang decora cover.
EC-305 10 1/4” x 4 1/2” Bevel Edge 5-gang decora cover. (Not shown)
EC-306 12 1/4” x 4 1/2” Bevel Edge 6-gang decora cover. (Not shown)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-7
Revised 02/01/16
Illustrations are for demonstration purposes only.
Contemporary decora covers.
EC-9301 – EC-9306 CONTEMPORARY DECORA COVERS
2 3/4"
4 1/
2"
EC-9301 – Single decora cover.
4 3/4"
4 1/
2"
EC-9302 – Two gang decora cover.
6 3/4"
4 1/
2"
EC-9303 – Three gang decora cover.
8 1/4"
4 1/
2"
EC-9304 – Four gang decora cover.
EC-9301 2 3/4” x 4 1/2” Contemporary single decora cover.
EC-9302 4 3/4” x 4 1/2” Contemporary 2-gang decora cover.
EC-9303 6 3/4” x 4 1/2” Contemporary 3-gang decora cover.
EC-9304 8 1/4” x 4 1/2” Contemporary 4-gang decora cover.
EC-9305 10 1/4” x 4 1/2” Contemporary 5-gang decora cover. (Not shown)
EC-9306 12 1/4” x 4 1/2” Contemporary 6-gang decora cover. (Not shown)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-8
Revised 02/01/16
Illustrations are for demonstration purposes only.
Plate thickness is 1/4”.Switch plates are attached to the wall with magnets instead of screws.No visible fasteners.
Magnetic decora covers.
EC-9301M – EC-9302M MAGNETIC DECORA COVERS
EC-9301M – Magnetic decora cover.
Back View
EC-9302M – Magnetic decora cover.
Back View
2 7/8"
4 3/
4"
2 7/8" 4 3/4"
4 3/
4"
4 3/4"
EC-9301M 2 7/8” x 4 3/4” Magnetic single decora cover.
EC-9302M 4 3/4” x 4 3/4” Magnetic 2-gang decora cover.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-9
Revised 02/01/16
Illustrations are for demonstration purposes only.
Miscellaneous Bevel Edge covers.
EC-400 – EC-600 MISCELLANEOUS BEVEL EDGE COVERS
2 3/4"
4 1/
2"
EC-400 – Single blank cover.
4 3/4"
4 1/
2"
EC-500 – Switchplate/decora combination cover.
4 3/4"
4 1/
2"
EC-600 – Switchplate/outlet combination plate.
2 3/4"
4 1/
2"
EC-401 – Cable cover.
EC-400 2 3/4” x 4 1/2” Bevel Edge blank cover.
EC-401 2 3/4” x 4 1/2” Bevel Edge cable cover.
EC-500 4 3/4” x 4 1/2” Bevel Edge switchplate/decora combination cover.
EC-600 4 3/4” x 4 1/2” Bevel Edge switchplate/outlet combination cover.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-10
Revised 02/01/16
Illustrations are for demonstration purposes only.
Miscellaneous contemporary covers.
EC-9400 – EC-9600 MISCELLANEOUS CONTEMPORARY COVERS
2 3/4"
4 1/
2"
EC-9400 – Single blank cover.
4 3/4"
4 1/
2"
EC-9500 – Switchplate/decora combination cover.
4 3/4"
4 1/
2"
EC-9600 – Switchplate/outlet combination cover.
2 3/4"
4 1/
2"
EC-9401 – Cable cover.
EC-9400 2 3/4” x 4 1/2” Contemporary blank cover.
EC-9401 2 3/4” x 4 1/2” Contemporary cable cover.
EC-9500 4 3/4” x 4 1/2” Contemporary switchplate/decora combination cover.
EC-9600 4 3/4” x 4 1/2” Contemporary switchplate/outlet combination cover.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-11
Revised 02/01/16
Illustrations are for demonstration purposes only.
Handrail brackets.
HB-1 – HB-4 HANDRAIL BRACKETS
2 3/4"3"
HB-1 – Handrail bracket
complete w/lag cover. – Shown w/Lag-1.
4 3/4"
3"
HB-2 – Handrail bracket
complete w/lag cover. – Shown w/Lag-1.
3 3/4"
3"
HB-4 – Handrail bracket
complete w/lag cover. – Shown w/Lag-1.
1 5/8" 1 5/8" 1 5/8"
1 1/4" 1 1/4" 1 1/4"
HB-1 2 3/4” x 3” Handrail bracket w/lag cover.
HB-2 4 3/4” x 3” Handrail bracket w/lag cover.
HB-4 3 3/4” x 3” Handrail bracket w/lag cover.
* Specify lag cover.
Additional lag bolt covers.
LAG-1 15/16” x 1/2” Dome
LAG-2 1” x 1/2” Square
LAG-3 7/8” x 1/2” Cylindrical
1/2"
1"
1/2"
7/8"
1/2"
1 5/16"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-12
Revised 02/01/16
Illustrations are for demonstration purposes only.
Handrail brackets.
HB-500 – HB-502 HANDRAIL BRACKETS
2 5/8"
2 1/
2"
2 1/2"
HB-500 – Handrail bracket complete w/lag cover. – Shown w/P-402 escutcheon/Lag-3.
2 1/
2"
2 1/2"
HB-501 – Handrail bracket complete w/lag cover. – Shown w/P-402 escutcheon/Lag-3.
3 5/8"1 5/8"1 5/8"1 1/4" 1 1/4"
* Please specify escutcheon. See Section 3/ Binder 1 for escutcheon options.* Specify lag cover.
HB-500 2 5/8” x 2 1/2” Handrail bracket w/lag cover.*
HB-501 3 5/8” x 2 1/2 “ Handrail bracket w/lag cover.*
HB-502 5” x 2 1/2 “ Handrail bracket w/lag cover.* (Not shown)
Additional lag bolt covers.
LAG-1 15/16” x 1/2” Dome
LAG-3 7/8” x 1/2” Cylindrical 1/2"
7/8"
1/2"
1 5/16"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-13
Revised 02/01/16
Illustrations are for demonstration purposes only.
HB-600 HANDRAIL BRACKETS
Handrail brackets.
* Available with round escutcheons only. See Section 3/ Binder 1 for escutcheon options.
1 13/16"
4 3/
4"
HB-600 – Handrail bracket. – Shown w/RP-926. – Machined for 1 3/8" dowel rail.
1 1/2"
7/8"
2 5/8"
7/32"
2 1/2"
HB-600 2 5/8” Handrail bracket.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-14
Revised 02/01/16
Illustrations are for demonstration purposes only.
Footrail brackets.
FTRL-534 – FRTL-ROD FOOTRAIL BRACKET
FTRL-534 – Footrail bracket. – Shown w/OP-600. – Specify bracket center-to-centers. – Specify rod length.
foot
rail
Front View
pipe fastener
Side View
1 3/
8"
dia
7 1/
4"
3" 5 3/4"
1 5/
8"
1/2"
CLST-F1 – End cap.
CLST-F1 End caps included on each end.
Specify escutcheon. Refer to Section 3/Binder 1 for escutcheon options and pricing.
Provided with #10 x 2 oval head wood screws.
FTRL-534 5 1/2” x 4 3/4” Footrail bracket.
FTRL-ROD-1 Footrail rod. Type L copper tubing. S2, S3, W3 finishes only. Specify length.* Footrail over 12’ needs splice. **
FTRL-ROD-2 Footrail rod. Type L copper tubing. S, W, S1, W1, W2 finishes only. Specify length.* Footrail over 9’ needs splice. **
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-15
Revised 02/01/16
Illustrations are for demonstration purposes only.
PF-101 NEWEL POST FINIAL
Newel post finial.
4 1/2"
6 1/
4"PF-101 – Newel post finial.
5 9/16"
2 1/
4"
3/4"
PF-101 5 9/16” x 5 9/16” x 6 1/4” Newel post finial.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-16
Revised 02/01/16
Illustrations are for demonstration purposes only.
SN-150 STAIR NOSING
Stair nosing.
2 3/8"
9/32
"SN-100 – Stair nosing.
1 7/8"
3/4"
2 3/
8"
1/2"
3/8"
PROFILE VIEW TOP VIEW
Stair nosing can be sent with Blind 8-32 x 1/2” posts 1/2” in from back edge or sent with wood screws. Dimensions must be specified when ordering.
Miter cuts or cut to length may be made on site using a tile saw with diamond blade.
SN-150 Stair nosing.
SN-150MITERCUT Stair nosing.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-17
Revised 02/01/16
Illustrations are for demonstration purposes only.
Gas keys complete with key and escutcheon.
Specify square keyhole 1/4”, 5/16” or 6.6mm.Custom sizes available.
GK-1 – GKO-6 GAS KEYS
1"
GK-1 – Gas key w/
escutcheon.
2"
GK-2 – Gas key w/
escutcheon.
GK-4 – Gas key w/
escutcheon.
4"
GK-6 – Gas key w/
escutcheon.
6"
7/8"
3" 7/8"
3" 7/8" 3" 3"7/8"
1 1/4" 1 1/4" 1 1/4" 1 1/4"
GK-1 1” Gas key w/escutcheon.
GK-2 2” Gas key w/escutcheon.
GK-3.5 3 1/2” Gas key w/escutcheon.
GK-4 4” Gas key w/escutcheon.
GK-5 5” Gas key w/escutcheon.
GK-5.5 5 1/2” Gas key w/escutcheon.
GK-6 6” Gas key w/escutcheon.
GKO-1 1” Gas key only.
GKO-2 2” Gas key only.
GKO-3.5 3 1/2” Gas key only.
GKO-4 4” Gas key only.
GKO-5 5” Gas key only.
GKO-5.5 5 1/2” Gas key only.
GKO-6 6” Gas key only.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-18
Revised 02/01/16
Illustrations are for demonstration purposes only.
Gas key escutcheons.
GK-ESC GAS KEY ESCUTCHEON
2 1/2" 1 1/2"
GK-ESC – Round gas key
escutcheon.
1 1/4" 1/4"
GK-ESC 2 1/2” Round gas key escutcheon.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-19
Revised 02/01/16
Illustrations are for demonstration purposes only.
1” Wood screws provided.
Standard house numbers.
HN-1 – HN-0 HOUSE NUMBERS
HN-8 HN-9 HN-0HN-7HN-6
HN-3 HN-4 HN-5HN-2HN-1
4 1/
2"4
1/2"
2 13/16"
1" 3" 2 7/8" 2 7/8" 2 7/8"
2 7/8" 3" 2 13/16" 2 13/16"9/
16"
9/16
"
9/16
"
9/16
"
9/16" 9/16" 9/16" 9/16"
9/16"9/16"
HN-1 4 1/2” Surface mount house number 1.
HN-2 4 1/2” Surface mount house number 2.
HN-3 4 1/2” Surface mount house number 3.
HN-4 4 1/2” Surface mount house number 4.
HN-5 4 1/2” Surface mount house number 5.
HN-6 4 1/2” Surface mount house number 6.
HN-7 4 1/2” Surface mount house number 7.
HN-8 4 1/2” Surface mount house number 8.
HN-9 4 1/2” Surface mount house number 9.
HN-0 4 1/2” Surface mount house number 0.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-20
Revised 02/01/16
Illustrations are for demonstration purposes only.
Jeff’s house numbers.
HNJ-1 – HNJ-0 HOUSE NUMBERS
HNJ-8 HNJ-9 HNJ-0HNJ-7HNJ-6
HNJ-3 HNJ-4 HNJ-5HNJ-2HNJ-1
7 1/
4"7
1/4"
Blind MountingTwo 1/4” x 1 3/8” brass posts project off back of HNJ.
HNJ-1 7 1/4” Jeff’s house number 1.
HNJ-2 7 1/4” Jeff’s house number 2.
HNJ-3 7 1/4” Jeff’s house number 3.
HNJ-4 7 1/4” Jeff’s house number 4.
HNJ-5 7 1/4” Jeff’s house number 5.
HNJ-6 7 1/4” Jeff’s house number 6.
HNJ-7 7 1/4” Jeff’s house number 7.
HNJ-8 7 1/4” Jeff’s house number 8.
HNJ-9 7 1/4” Jeff’s house number 9.
HNJ-0 7 1/4” Jeff’s house number 0.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-21
Revised 02/01/16
Illustrations are for demonstration purposes only.
HL-A – HL-Z HOUSE LETTERS
1” Wood screws provided.
Standard house letters (A-Z).
HL-A
4 1/
2"
3 1/2"
9/16"
HL-A 4 1/2” Surface mount house letter A.HL-B 4 1/2” Surface mount house letter B.HL-C 4 1/2” Surface mount house letter C.HL-D 4 1/2” Surface mount house letter D.HL-E 4 1/2” Surface mount house letter E.HL-F 4 1/2” Surface mount house letter F.HL-G 4 1/2” Surface mount house letter G.HL-H 4 1/2” Surface mount house letter H.HL-I 4 1/2” Surface mount house letter I.HL-J 4 1/2” Surface mount house letter J.HL-K 4 1/2” Surface mount house letter K.HL-L 4 1/2” Surface mount house letter L.HL-M 4 1/2” Surface mount house letter M.HL-N 4 1/2” Surface mount house letter N.HL-O 4 1/2” Surface mount house letter O.HL-P 4 1/2” Surface mount house letter P.HL-Q 4 1/2” Surface mount house letter Q.HL-R 4 1/2” Surface mount house letter R.HL-S 4 1/2” Surface mount house letter S.HL-T 4 1/2” Surface mount house letter T.HL-U 4 1/2” Surface mount house letter U.HL-V 4 1/2” Surface mount house letter V.HL-W 4 1/2” Surface mount house letter W.HL-X 4 1/2” Surface mount house letter X.HL-Y 4 1/2” Surface mount house letter Y.HL-Z 4 1/2” Surface mount house letter Z.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-22
Revised 02/01/16
Illustrations are for demonstration purposes only.
Wood screws provided.
Hooks & eyes.
HE-40 – HE-200-12 HOOKS & EYES
1 3/8"
1 3/
8"
HE-40 – Small hook & eye
w/1 3/8" square plates.
4 1/4"
1 3/8"
1 7/
8"
HE-50 – Small hook & eye
w/1 3/8" x 1 7/8" plates.
4 1/4"
2 1/4"
2 1/
4"
HE-100 – Large hook & eye
w/2 1/4" square plates.
8"
HE-200 – Large hook & eye
w/2 1/4" round plates.
2 1/4"
2 1/
4"
8"
HE-40 4 1/4” Small hook & eye w/1 3/8” square plates.
HE-50 4 1/4” Small hook & eye w/1 3/8” x 1 7/8” rectangular plates.
HE-100 8” Large hook & eye w/2 1/4” square plates.
HE-200 8” Large hook & eye w/2 1/4” round plates.
HE-100RR 8” Large hook & eye w/2 1/4” square plates & animal resistant catch. (Not shown)
HE-200RR 8” Large hook & eye w/2 1/4” round plates & animal resistant catch. (Not shown)
HE-100-12 12” Large hook & eye w/2 1/4” square plates. (Not shown)
HE-200-12 12” Large hook & eye w/2 1/4” round plates. (Not shown)
HE-100-24 24” Large hook & eye w/2 1/4” square plates. (Not shown)
HE-200-24 24” Large hook & eye w/2 1/4” round plates. (Not shown)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-23
Revised 02/01/16
Illustrations are for demonstration purposes only.
Hasp latches & slide bolts.
HASP-10, SLBT-14 HASP LATCHES & SLIDE BOLTS
HASP-10 – Hasp latch w/3 guides.
SLBT-14 – T-shaped slide bolt w/3 guides.
10"
3 1/
2"
2"
1 3/
8"
1/2"
1 1/4"
13 3/4"
1 1/
2"
2"
5/8"
10"
2 3/
8"1"
HASP-10 10” Hasp latch.
SLBT-14 13 3/4” T-shaped slide bolt.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-24
Revised 02/01/16
Illustrations are for demonstration purposes only.
If more than (6) PR-1-8 are required, please specify.* Cannonball is 3 7/8” diameter and weighs 9.5 pounds.
Cannonball gate closer complete with ball, 6 chain links and 2 surface mounts.
GC-100 CANNONBALL GATE CLOSER
GC-100 – Cannonball gate closer. – Includes six PR-1-8 (8") chain links. – Includes two PR-4 surface mounts. – Includes two PR-2 S-hooks. 1 1/4" wood screws provided. The canonball gate closer is designed for use on the inside of a gate, which opens outwardly. The mount can be installed on an auxilliary post as shown or on a hinged fence post. The mount on the post should be approximately 36" from the ground. Open the gate 90 degrees and extend the chain, cannonball and S-hooks to the mount location on the gate. Make sure the cannonball is at least 3" from the ground when the gate is fully closed. One may need to place the mount higher on the gate, add or subract a link to adjust the ball swing height. A stop block (door stop) will need to be installed on the latch post.
(The mount can be placeddirectly on the hinge post.)
GC-100 3 7/8” Cannonball gate closer with six 8” PR-1 chain links and two PR-4 surface mounts. Includes two PR-2 S-hooks.
PR-1-8 Additional 8” cannonball chain link.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-25
Revised 02/01/16
Illustrations are for demonstration purposes only.
Bells.
FPB-6 – FPB-8 BELLS
6"
4 3/
4"
6"
FPB-6 – 6" dia. solid bronze bell. – Available w/C-1 wall mount bracket
or C-2 ceiling mount bracket.
3 7/
8"
2 7/8"
2 1/
4"
C-2
C-1
2 7/8"
2 1/
4"
C-2
FPB-8 – 8" dia. solid bronze bell. – Available w/C-1 wall mount bracket
or C-2 ceiling mount bracket.
6 1/4"
7 3/
4"
8"
3 7/
8"
C-1
FPB-6/C-1 6” Small bell with wall mount bracket.
FPB-6/C-2 6” Small bell with ceiling mount bracket.
FPB-8/C-1 8” Large bell with wall mount bracket.
FPB-8/C-2 8” Large bell with ceiling mount bracket.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-26
Revised 02/01/16
Illustrations are for demonstration purposes only.
Tack room accessories.
BDL-901 – BDL-924, CT-100 TACK ROOM ACCESSORIES
6"6"
BDL-901 – Round bridle hook.
4"1 1/2"
BDL-923 – Double prong hook.
3"
BDL-924 – Single prong hook.
2"
2 1/2"1 1/2"
CT-100 – Two piece crosstie.
1 1/4"
1 5/
8"
2 3/
4"
13/16"2 3/8"
1/4"
1/4"1/4"
1 1/2"
BDL-901 6” Large round bridle hook.
BDL-923 4” x 3” Double prong girth hook.
BDL-924 1 1/2” x 2” Single prong girth hook.
CT-100 1 1/4” x 2 3/4” Cross ties (2 pieces).
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-27
Revised 02/01/16
Illustrations are for demonstration purposes only.
Boat cleats.
ANV-3 – ANV-10 BOAT CLEATS
3 1/4"
1"
ANV-3 – Boat cleat.
1 1/
16"
6"
7/16
"
ANV-6 – Boat cleat.
1 1/
2"
10"
ANV-10 – Boat cleat.
2 3/
8"
1"
2 1/4"3 3/4"
ANV-3 3 1/4” x 1” Boat cleat.
ANV-6 6” x 7/16” Boat cleat.
ANV-10 10” x 1” Boat cleat.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-28
Revised 02/01/16
Illustrations are for demonstration purposes only.
Closet components.
CLST-F1 – CLST-4E CLOSET COMPONENTS
1 5/
8"
CLST-F1 – Closet rod finial.
1/2"
1 5/
8"CLST-F2 – Closet rod finial
w/hook.
1/2"
CLST-3WM – Closet rod wall mount
pipe end.
CLST-4E – Closet elbow.
3 3/
4"
3 3/4"
1 3/
8"
3"
3/4"
1 5/
8"
1 3/8"
CLST-F1 1/2” x 1 5/8” Closet finial, flat.
CLST-F2 1/2” x 1 5/8” Closet finial with hook.
CLST-3WM 3/4” x 3” Closet wall-mount pipe end.
CLST-4E 3 3/4” Closet elbow.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-29
Revised 02/01/16
Illustrations are for demonstration purposes only.
CLST-ROD, CLST-5PPC, CLST-6PM CLOSET COMPONENTS
Closet components.
CLST-ROD – Closet rod pipe. – Specify length.
2 1/2"1
3/8"
CLST-5PPC – Closet rod connector.
1 3/16"
1 3/
8"
1/8"
1 1/
4"
1 1/
4"
O-Ring provides friction to keep sleeve in place
2"
0.19
69"
3/4"
1 1/4"1/4"
CLST-6PM – Peg mount closet end set w/sleeves.
CLST-ROD-1 Closet rod, type L copper tubing. S2, S3, W3 finishes only.
CLST-ROD-2 Closet rod, type L copper tubing. S, W, S1, W1, W2 finishes only. Closet rods over 9’ require splice.*
CLST-5PPC Closet rod pipe connector. Connector must be used w/CLST-13BK or CLST-15BK.
CLST-6PM Peg mount closet end set w/sleeves. 6’ maximum closet rod span (rod sold separately per foot).
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-30
Revised 02/01/16
Illustrations are for demonstration purposes only.
Closet brackets.
CLST-13BK – CLST-15BK CLOSET BRACKETS
CLST-13BK – Closet Bracket
CLST-15BK – Closet Bracket
11 5/8"1 1/2"
14"
14"
1 1/2"
14"
13"
3 1/
4"
4"
13 1/4"
12" 12"
3"
2 5/
16"
CLST-13BK 13” x 14” Closet corner bracket.
CLST-15BK 14” x 14” Closet bracket.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-31
Revised 02/01/16
Illustrations are for demonstration purposes only.
Corner brackets.
BKT-8 – BKT-12 CORNER BRACKETS
BKT-12 – Corner bracket
13 1/2"
13 1
/2"
3/4"
2 3/4"
3/4"
8"
8"2 1/2"
BKT-8 – Corner bracket
BKT-8 8” x 8” Corner bracket.
BKT-12 13 1/2” x 13 1/2” Corner bracket.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-32
Revised 02/01/16
Illustrations are for demonstration purposes only.
Contemporary corner bracket.
BKT-912 CONTEMPORARY CORNER BRACKETS
BKT-912 – Corner bracket
2 3/4" 13 1/2"
13 1
/2"
1/4"
BKT-912 13 1/2” x 13 1/2” Contemporary corner bracket.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-33
Revised 02/01/16
Illustrations are for demonstration purposes only.
Fire screen.
FS-100 FIRE SCREEN
FS-100 – Fire screen.
30 5
/8"
38 3/4"
1 7/
8" 1 3/
8"
3 7/
8"
11/16"
1 1/2"
1/2"
4" 4 7/16"
FS-100 38 3/4” x 30 5/8” Freestanding fire screen. Custom sizes available.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-34
Revised 02/01/16
Illustrations are for demonstration purposes only.
BROCHURE RACK
Brochure rack.
9 1/
4"
BR-100 – Brochure rack.
11" 3"
10"
1/2"
1"
BR-100 11” x 9 1/4” Brochure rack w/mahogany wood inserts.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
30-35
Revised 02/01/16
DESK CORD ESCUTCHEONIllustrations are for demonstration purposes only.
Desk cord escutcheon.
DKE-100 – Desk cord escutcheon.
2"
1/8"
1 5/
8"
1/2"
7/8"
DKE-100 Desk cord escutcheon.