Spec 19G Grip Handles & Push Plates
-
Upload
sun-valley-bronze -
Category
Documents
-
view
218 -
download
2
description
Transcript of Spec 19G Grip Handles & Push Plates
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m19-1
Revised 05/18/16
GRIP HANDLES & PUSH PLATES
ORDERING INSTRUCTIONS:Grip Handles & Push Plates: See Ordering Instructions in Binder 1/ Dealer Information. Custom Grip Handles & Push Plates: See Custom Ordering Instructions in Binder 1/ Dealer Information.
CONTENTSThis section contains grip handles, D handles, offset handles and push plates.Hand Peened and Inlay orders do NOT qualify for return and are non-refundable.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Grip handles can be mounted to push plates at no charge.
TABLE OF CONTENTS:
GRIP HANDLES PUSH PLATESCurved Grip Handles Pages 19-2 – 19-3 Bamboo Push Plates Page 19-46Round Foot Grip Handles Pages 19-4 – 19-6 Half Round Push Plates Page 19-47Square Foot Grip Handles Pages 19-7 – 19-8 Bevel Edge Push Plates Pages 19-48 – 19-49Knob Pull Grip Handles Page 19-9 Arch Push Plates Pages 19-50 – 19-53Contemporary Grip Handles Pages 19-10 – 19-18 Oval Push Plates Page 19-54Swedge Grip Handles Page 19-19 Contemporary Push Plates Pages 19-55 – 19-57Half Round Grip Handles Page 19-20 Fleur de Lis Push Plates Page 19-58Offset Grip Handles Pages 19-21 – 19-22 Ridge Push Plates Pages 19-59 – 19-60C Grip Handles Page 19-23 Corrugated w/Band Push Plates Page 19-61D Grip Handles Pages 19-24 – 19-25 Hampton Push Plates Page 19-62T Grip Handles Page 19-26 Trellis Push Plates Page 19-63Ridge Grip Handles Pages 19-27 – 19-29 Deco Push Plates Page 19-64Deco Grip Handles Page 19-30 Corrugated Push Plates Page 19-65Inlay Grip Handles Page 19-31 Bandbox Push Plates Page 19-66Corduroy Grip Handles Page 19-32 Hand Peened Push Plates Page 19-67Mesa Grip Handles Page 19-33 Inlay Push Plates Page 19-68The Lift Grip Handles Page 19-34 Circles Push Plates Page 19-69Stanley Grip Handles Page 19-35 Squares Push Plates Page 19-70Gem Grip Handles Page 19-36 Corduroy Push Plates Pages 19-71 – 19-72Bamboo Grip Handles Pages 19-37 – 19-38 Mesa Push Plates Page 19-73Twig Grip Handles Page 19-39 Burlap Push Plates Page 19-74Scalloped Grip Handles Page 19-40 Ridge Burlap Push Plates Page 19-75Twist Grip Handles Page 19-41Warp Grip Handles Page 19-42Gazelle Grip Handles Page 19-43Aztec Grip Handles Page 19-44Fly Rod Grip Handles Page 19-45
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-2
Revised 05/18/16
Illustrations are for demonstration purposes only.
Curved grip handles. *AVAILABLE BACK-TO-BACK.
699 – 714 CURVED GRIP HANDLES
GH-700* – 8" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
9 1/
8"
1 1/4"2 1/2"
1"
1 1/8"
3/4"
9/16"
2"
11/16"
GH-712* – 10 1/2" center-to-center. – 1 1/2" handle width. – *AVAILABLE BACK-TO-BACK.
11 3
/4"
1 1/2"2 1/2"
1"
1 1/8"
1"
1/2"
2"
5/8"
GH-714* – 12 3/4" center-to-center. – 1 1/2" handle width. – *AVAILABLE BACK-TO-BACK.
14 1
/4"
1 1/2"2 1/2"
1"
1 1/8"
1"
1/2"
2"
5/8"
GH-699* – 5" center-to-center. – 3/4" handle width. – *AVAILABLE BACK-TO-BACK.
5 5/
8"
3/4"1 9/16"
1/2"
3/4"
1/2"
3/8"
1"
7/16"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-700 shown)
Handle Grip: Oblong
GH-699 5 5/8” Curved grip handle. 5” center-to-center.*
GH-700 9 1/8” Curved grip handle. 8” center-to-center.*
GH-712 11 3/4” Curved grip handle. 10 1/2” center-to-center.*
GH-714 14 1/4” Curved grip handle. 12 3/4” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-3
Revised 05/18/16
Illustrations are for demonstration purposes only.
798 – 850 CURVED GRIP HANDLES
Curved grip handles. *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-800 shown)
Handle Grip: Round
GH-798 10 1/8” Curved grip handle. 8” center-to-center.*
GH-799 8 1/4” Curved grip handle. 7” center-to-center.*
GH-800 11 3/4” Curved grip handle. 9 3/4” center-to-center.*
GH-850 14 1/2” Curved grip handle. 12 3/8” center-to-center.*
GH-799* – 7" center-to-center. – 1 1/8 handle width. – *AVAILABLE BACK-TO-BACK.
GH-850* – 12 3/8" center-to-center. – 1 1/2" handle width. – *AVAILABLE BACK-TO-BACK.
8 1/
4"
1 1/8"2 3/4"
13/1
6"1
1/4"
7/8"
5/8"
14 1
/2"
1 3/4"3 1/2"
1 1/
2"1
3/4"
3/4"
1 1/4"
1/2"
1"
GH-800* – 9 3/4" center-to-center. – 1 1/4 handle width. – *AVAILABLE BACK-TO-BACK.
11 3
/4"
1 3/4"3"
1 1/
2"1
3/4"
9/16"
1 1/8"
5/8"
GH-798* – 8" center-to-center. – 1 1/4 handle width. – *AVAILABLE BACK-TO-BACK.
10 1
/8"
1 3/4"3"
1 1/
2"1
3/4"
9/16"
1 1/8"
3/4"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-4
Revised 05/18/16
Illustrations are for demonstration purposes only.
Round foot grip handles. *AVAILABLE BACK-TO-BACK.
440 – 522 ROUND FOOT GRIP HANDLES
GH-500* – 11" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
GH-440* – 8" center-to-center. – 3/4" handle width. – *AVAILABLE BACK-TO-BACK.
9 1/
2"
1 3/8"
GH-450* – 12" center-to-center. – 3/4" handle width. – *AVAILABLE BACK-TO-BACK.
13 3
/8"
1 3/8"2 1/4"
2 1/4"
5/8" 3/4"
GH-522* – 20 3/8" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1 3/4"
22 1
/8"
2 1/2"
3/4"
12 3
/4"
2 1/2" 1 3/4"
3/4"
GH-455* – 23 1/2" center-to-center. – 3/4" handle width. – *AVAILABLE BACK-TO-BACK.
25 1
/4"
1 3/8"2 1/4"
3/4"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-440 shown)
Handle Grip: Round
GH-440 9 1/2” Round foot grip handle. 8” center-to-center.*
GH-450 13 3/8” Round foot grip handle. 12” center-to-center.*
GH-455 25 1/4” Round foot grip handle. 23 1/2” center-to-center.*
GH-500 12 3/4” Round foot grip handle. 11” center-to-center.*
GH-522 22 1/8” Round foot grip handle. 20 3/8” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-5
Revised 05/18/16
Illustrations are for demonstration purposes only.
525 – 546 ROUND FOOT GRIP HANDLES
Round foot grip handles. *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
GH-540* – 7 3/8" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
1 3/4"
9 1/
8"
2 1/4"
3/4"
GH-525* – 23 1/2" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1 3/4"25
1/4
"2 1/2"
3/4"
GH-541* – 9 1/16" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
1 3/4"
10 7
/8"
2 1/4"
3/4"
GH-546* – 14 1/4" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
1 3/4"
16"
2 1/4"
3/4"
GH-525 25 1/4” Round foot grip handle. 23 1/2” center-to-center.*
GH-540 9 1/8” Round foot grip handle. 7 3/8” center-to-center.*
GH-541 10 7/8” Round foot grip handle. 9 1/16” center-to-center.*
GH-546 16” Round foot grip handle. 14 1/4” center-to-center.*
Optional back-to-back mounting. (GH-540 shown)
Handle Grip: Oval
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-6
Revised 05/18/16
Illustrations are for demonstration purposes only.
550 – 553 ROUND FOOT GRIP HANDLES
Round foot grip handles. *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
GH-552* – 16" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
2 1/4"
18 1
/8"
3 1/2"
1"
GH-553* – 16" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
2 1/4"
18 1
/8"
3 1/2"
1 1/4"
GH-550* – 16 1/8" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1 3/4"18
"2 1/2"
3/4"
GH-550 18” Round foot grip handle. 16 1/8” center-to-center.*
GH-552 18 1/8” Round foot grip handle. 16” center-to-center.*
GH-553 18 1/8” Round foot grip handle. 16” center-to-center.*
Optional back-to-back mounting. (GH-540 shown)
Handle Grip: Oval (GH-550, GH-552)
Handle Grip: Round (GH-553)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-7
Revised 05/18/16
Illustrations are for demonstration purposes only.
Square foot grip handles. *AVAILABLE BACK-TO-BACK.
500SQ – 585 SQUARE FOOT GRIP HANDLES
GH-500SQ* – 10 3/8" center-to-center. – 1" oval handle width. – *AVAILABLE BACK-TO-BACK.
12"
2 1/2"
GH-550SQ* – 16 1/4" center-to-center. – 1" oval handle width. – *AVAILABLE BACK-TO-BACK.
GH-525SQ* – 23 3/8" center-to-center. – 1" oval handle width. – *AVAILABLE BACK-TO-BACK.
1 5/8"
18"
2 1/2"
1 5/8"
25 1
/4"
2 1/2"
GH-540SQ* – 6 3/8" center-to-center. – 7/8" oval handle width. – *AVAILABLE BACK-TO-BACK.
1 5/8"
8"
2 1/4"
1 5/8"
3/4"3/4" 3/4" 3/4"
GH-585* – 23 5/8" center-to-center. – 1" oval handle width. – *AVAILABLE BACK-TO-BACK.
1 3/4"
25 3
/8"
2 1/2"
3/4"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-500SQ shown)
Handle Grip: Oval
GH-500SQ 12” Square foot grip handle. 10 3/8” center-to-center.*GH-540SQ 8” Square foot grip handle. 6 3/8” center-to-center.*GH-550SQ 18” Square foot grip handle. 16 1/4” center-to-center.*GH-525SQ 25 1/4” Square foot grip handle. 23 3/8” center-to-center.*GH-585 25 3/8” Square foot grip handle. 23 5/8” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-8
Revised 05/18/16
Illustrations are for demonstration purposes only.
Square foot grip handles. *AVAILABLE BACK-TO-BACK.
549 – 565 SQUARE FOOT GRIP HANDLES
GH-549* – 10" center-to-center. – 5/8" square handle width. – *AVAILABLE BACK-TO-BACK.
7/8"
11"
1 3/8"
GH-551* – 12" center-to-center. – 5/8" square handle width. – *AVAILABLE BACK-TO-BACK.
GH-560* – 16" center-to-center. – 5/8" square handle width. – *AVAILABLE BACK-TO-BACK.
GH-565* – 16 5/8" center-to-center. – 1" square handle width. – *AVAILABLE BACK-TO-BACK.
7/8"
13"
1 3/8"
1 1/4"
17 1
/4"
1 3/4" 1 3/4"
18 1
/2"
3 1/4"
7/16" 7/16" 7/16" 1 3/16"
GH-559* – 14 3/4" center-to-center. – 5/8" square handle width. – *AVAILABLE BACK-TO-BACK.
1 1/4"
16"
1 3/4"
7/16"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-549 shown)
Handle Grip: Square
GH-549 11” Square foot grip handle. 10” center-to-center.*
GH-551 13” Square foot grip handle. 12” center-to-center.*
GH-559 16” Square foot grip handle. 14 3/4” center-to-center.*
GH-560 17 1/4” Square foot grip handle. 16” center-to-center.*
GH-565 18 1/2” Square foot grip handle. 16 5/8” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-9
Revised 05/18/16
Illustrations are for demonstration purposes only.
KP209 KNOB PULL GRIP HANDLES
Knob pull grip handles. **AVAILABLE BACK-TO-BACK.
GH-KP209* – 4 1/2" Knob pull. – *AVAILABLE BACK-TO-BACK.
4 1/
2"
4 1/2"2 3/4"
GH-KP209 4 1/2” Knob pull.*
Thru bolt provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-KP209 shown).
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-10
Revised 05/18/16
Illustrations are for demonstration purposes only.
Contemporary grip handles. *AVAILABLE BACK-TO-BACK.
900 – 938 CONTEMPORARY GRIP HANDLES
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
GH-900 6 1/2” Contemporary grip handle. 6 1/8” center-to-center.*
GH-914 14 5/16” Contemporary grip handle. 13 15/16” center-to-center.
GH-924 24 3/8” Contemporary grip handle. 23 15/16” center-to-center.
GH-935 7” Contemporary grip handle. 6” center-to-center.*
GH-938 13 1/8” Contemporary grip handle. 12 1/4” center-to-center.*
GH-900* – 6 1/8" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1"
6 1/
2"
2"
1/2"
GH-935* – 6" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
7/8"
7"
1 3/4"
7/8"
GH-924 – 23 15/16" center-to-center. – 1 1/4" handle width.
1 1/4"
24 3
/8"
2"
3/8"
5/16" 5/16" 5/16"
GH-938* – 12 1/4" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
13 1
/8"
7/8"1 3/4"
7/8"
3/8"
GH-914 – 13 15/16" center-to-center. – 1 1/4" handle width.
1 1/4"
14 5
/16"
2 1/16"3/
8"
1/4"
Optional back-to-back mounting. (GH-900 shown)
Handle Grip: Rectangular
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-11
Revised 05/18/16
Illustrations are for demonstration purposes only.
939 – 974 CONTEMPORARY GRIP HANDLES
Contemporary grip handles. *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
GH-958 – 10 1/4" center-to-center. – 1" handle width.
1"
10 1
/2"
1 1/4"1/
4"
1/4"
GH-939* – 17 1/4" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
18"
7/8"1 3/4"
7/8"
3/8"
GH-970 – 9 1/16" center-to-center. – 2" handle width.
9 5/
8"
2"2 1/2"
7/16
"
1/2"
GH-972 – 12 15/16" center-to-center. – 2" handle width.
13 7
/16"
2"2 1/2"
7/16
"
1/2"
GH-974 – 21 1/16" center-to-center. – 2" handle width.
21 5
/8"
2"2 1/2"
7/16
"
1/2"
Optional back-to-back mounting. (GH-972 shown)
Handle Grip: Rectangular
GH-939 18” Contemporary grip handle. 17 1/4” center-to-center.*
GH-958 10 1/2” Contemporary grip handle. 10 1/4” center-to-center.
GH-970 9 5/8” Contemporary grip handle. 9 1/16” center-to-center.
GH-972 13 7/16” Contemporary grip handle. 12 15/16” center-to-center.
GH-974 21 5/8” Contemporary grip handle. 21 1/16” center-to-center.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-12
Revised 05/18/16
Illustrations are for demonstration purposes only.
983 – 989 CONTEMPORARY GRIP HANDLES
Contemporary grip handles. *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
GH-989* – 16 13/16" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
1 1/4"
18"
2 3/8"
1 1/
4"
1"
GH-985* – 13 1/8" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1"
13 1
/2"
2 1/2"
1/2"
GH-984* – 8" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1"
8 1/
2"
2"
5/8"
GH-983* – 7 11/16" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1"
8 1/
4"
2"
5/16" 5/16" 5/16"
7/16
"
GH-986* – 14 5/8" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1"
15"
2 1/2"
1/2"
5/16"
Optional back-to-back mounting. (GH-984 shown)
Handle Grip: Rectangular
GH-983 8 1/4” Contemporary grip handle. 7 11/16” center-to-center.*
GH-984 8 1/2” Contemporary grip handle. 8” center-to-center.*
GH-985 13 1/2” Contemporary grip handle. 13 1/8” center-to-center.*
GH-986 15” Contemporary grip handle. 14 5/8” center-to-center.*
GH-989 18” Contemporary grip handle. 16 13/16” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-13
Revised 05/18/16
Illustrations are for demonstration purposes only.
990 – 991-55 CONTEMPORARY GRIP HANDLES
Contemporary grip handles. *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
GH-990* – 11 3/8" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
1 1/4"
12"
2"
GH-991* – 17 3/8" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
1 1/4"
18"
2"
5/8"
11/1
6"5/8" 5/8"
GH-991-42* – 41 1/2" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
1 1/4"
42"
2"
11/1
6"
5/8"
GH-991-55* – 54 1/2" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
1 1/4"
55 1
/8"
2"
11/1
6"
5/8"
Optional back-to-back mounting. (GH-990 shown)
Handle Grip: Rectangular
GH-990 12” Contemporary grip handle. 11 3/8” center-to-center.*GH-991 18” Contemporary grip handle. 17 3/8” center-to-center.*GH-991-42 42” Contemporary grip handle. 41 1/2” center-to-center.*GH-991-55 55 1/8” Contemporary grip handle. 54 1/2” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-14
Revised 05/18/16
Illustrations are for demonstration purposes only.
Contemporary ergonomic grip handles. *AVAILABLE BACK-TO-BACK.
992 – 998 CONTEMPORARY ERGONOMIC GRIP HANDLES
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-998-36 shown)
Handle Grip: Rectangular w/ Curve to Bottom
GH-992 8 1/4” Ergonomic grip handle. 7 5/8” center-to-center.*
GH-993 10” Ergonomic grip handle. 9 3/8” center-to-center.*
GH-996 15” Ergonomic grip handle. 14 3/8” center-to-center.*
GH-998 24” Ergonomic grip handle. 23 1/2” center-to-center.*
GH-992* – 7 5/8" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
8 1/
4"
1 1/4"2 1/2"
GH-993* – 9 3/8" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
GH-996* – 14 3/8" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
10"
1 1/4"2 1/2"
15"
1 1/4"2 3/8"
5/8" 11
/16"
11/1
6"
GH-998* – 23 1/2" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
24"
1 1/4"2 1/2"
5/8"
3/4" 3/4" 3/4" 7/8"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-15
Revised 05/18/16
Illustrations are for demonstration purposes only.
98-36 – 998-42 CONTEMPORARY ERGONOMIC GRIP HANDLES
Contemporary ergonomic grip handles. *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
GH-998-36 36 5/8” Ergonomic grip handle. 36” center-to-center.*
GH-998-42 42” Ergonomic grip handle. 41 3/8” center-to-center.*
GH-998-36* – 36" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
36 5
/8"
1 1/4"2 1/2"
5/8"
7/8"
GH-998-42* – 41 3/8" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
42"
1 1/4"2 1/2"
5/8"
7/8"
Optional back-to-back mounting. (GH-998-36 shown)
Handle Grip: Rectangular w/ Curve to Bottom
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-16
Revised 05/18/16
Illustrations are for demonstration purposes only.
1003 – 1012 SQUARE GRIP HANDLES
Square grip handles.
GH-1003* – Square grip handle. – 3" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.
3 5/
8"
2"1/2"
5/8"
5/8"4
5/8"
2"1/2"
5/8"
5/8"
GH-1004* – Square grip handle. – 4" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.
6 5/
8"
2"1/2"
5/8"
5/8"
GH-1006* – Square grip handle. – 6" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.
8 5/
8"
2"1/2"
5/8"
5/8"
GH-1008* – Square grip handle. – 8" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.
10 5
/8"
2"1/2"
5/8"
5/8"
GH-1010* – Square grip handle. – 10" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.
12 5
/8"
2"1/2"
5/8"
5/8"
GH-1012* – Square grip handle. – 12" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.
GH-1003 3 5/8” Square grip handle. 3” center-to-center.*
GH-1004 4 5/8” Square grip handle. 4” center-to-center.*
GH-1006 6 5/8” Square grip handle. 6” center-to-center.*
GH-1008 8 5/8” Square grip handle. 8” center-to-center.*
GH-1010 10 5/8” Square grip handle. 10” center-to-center.*
GH-1012 12 5/8” Square grip handle. 12” center-to-center.*
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-1006 shown)
Handle Grip: Rectangular
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-17
Revised 05/18/16
Illustrations are for demonstration purposes only.
Contemporary grip handles. *AVAILABLE BACK-TO-BACK.
9107 – 9148 CONTEMPORARY GRIP HANDLES
GH-9116* – 15" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.
16"
2 1/4" 7/8"
7/8"
GH-9119* – 18 1/8" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.
18 7
/8"
2 1/4" 7/8"
7/8"
9/16" 9/16"
GH-9142* – 31 1/4" center- to-center.
– 1/2" face width. – *AVAILABLE BACK-TO-BACK.
42"
2 5/8"
1"
5"1"
1 5/8"
1/2"
GH-9115* – 14 1/16" center- to-center. – 11/16" face width. – *AVAILABLE BACK-TO-BACK.
1"
2 1/2" 1"
1"
15"
GH-9148* – 44" center-to-center. – 3/4" face width. – *AVAILABLE BACK-TO-BACK.
48"
9"
1 9/16"
2"1
1/2"
7 7/16"
3/4"
GH-9107* – 6" center-to-center. – 11/16" face width. – *AVAILABLE BACK-TO-BACK.
1"
2 1/2" 1"
1" 7"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mounting
BTB Upcharge
GH-9107 7” Contemporary grip handle. 6” center-to-center.*
GH-9115 15” Contemporary grip handle. 14 1/16” center-to-center.*
GH-9116 16” Contemporary grip handle. 15” center-to-center.*
GH-9119 18 7/8” Contemporary grip handle. 18 1/8” center-to-center.*
GH-9142 42” Contemporary grip handle. 31 1/4” center-to-center.*
GH-9148 48” Contemporary grip handle. 44” center-to-center.*
OptionalOptional back-to-back mounting. (GH-9116 shown)
Handle Grip: Rectangular
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-18
Revised 05/18/16
Illustrations are for demonstration purposes only.
2000-12 – 2000-18 CONTEMPORARY GRIP HANDLES
Contemporary grip handles. *AVAILABLE BACK-TO-BACK.
GH-2000-12* – 12" center-to-center. – 1 1/2" handle width. – *AVAILABLE BACK-TO-BACK.
2 1/4"
12 5
/8"
1 1/2"
11 3
/8"
1 3/8"
GH-2000-18* – 18" center-to-center. – 1 1/2" handle width. – *AVAILABLE BACK-TO-BACK.
2 1/4"
18 5
/8"
1 1/2"
17 3
/8"
1 3/8"
3/8" 3/8"
5/8"
5/8"
GH-2000-12 12 5/8” Contemporary grip handle. 12” center-to-center.*
GH-2000-18 18 5/8” Contemporary grip handle. 18” center-to-center.*
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-2000-12 shown).
Handle Grip: Rectangular
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-19
Revised 05/18/16
Illustrations are for demonstration purposes only.
Swedge grip handles. *AVAILABLE BACK-TO-BACK.
805 SWEDGE GRIP HANDLES
GH-805* – 22 15/16" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.
1 3/8"
24 1
/8"
3/4"
1 1/
8"
9/16" 1/2"
GH-805 24 1/8” Swedge grip handle. 22 15/16” center-to-center.*
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-805 shown)
Handle Grip: Rectangular
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-20
Revised 05/18/16
Illustrations are for demonstration purposes only.
Half round grip handles. *AVAILABLE BACK-TO-BACK.
R10 – R12 HALF ROUND GRIP HANDLES
GH-R10* – 9 1/8" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
5"10
"1 3/4"
7/8"
5/16"
6"
12"
1 3/4"
7/8"
5/16"
GH-R12* – 11" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
GH-RE10* – 9 1/8" center-to-center. – 1" handle width. – 1/2" round ergonomic grip. – *AVAILABLE BACK-TO-BACK.
5"
10"
1 3/4"
7/8"
1/4"1/4"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-R10 shown)
GH-R10 10” Half round grip handle. 9 1/8” center-to-center.*
GH-RE10 10” Half round ergonomic grip handle. 9 1/8” center-to-center.*
GH-R12 12” Half round grip handle. 11” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-21
Revised 05/18/16
Illustrations are for demonstration purposes only.
Offset grip handles. *AVAILABLE BACK-TO-BACK.
129SL – 132SL OFFSET GRIP HANDLES
GH-129SL* – 5 1/2" center-to-center. – 5/8" handle width. – *AVAILABLE BACK-TO-BACK.
6 1/
8"
2 1/4"1 3/4"
GH-130SL* – 6 3/8" center-to-center. – 5/8" handle width. – *AVAILABLE BACK-TO-BACK.
7"
2 1/8"1 3/4"
GH-131SL* – 7 1/2" center-to-center. – 5/8" handle width. – *AVAILABLE BACK-TO-BACK.
8 1/
8"
2 1/8"1 3/4"
GH-132SL* – 9 5/8" center-to-center. – 5/8" handle width. – *AVAILABLE BACK-TO-BACK.
10 1
/4"
2 1/4"1 3/4"
1/2" 1/2" 1/
2" 1/2"
5/8" 5/8" 5/8" 5/8"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-130SL shown)
Handle Grip: Rectangular
GH-129SL 6 1/8” Offset handle. 5 1/2” center-to-center.*
GH-130SL 7” Offset handle. 6 3/8” center-to-center.*
GH-131SL 8 1/8” Offset handle. 7 1/2” center-to-center.*
GH-132SL 10 1/4” Offset handle. 9 5/8” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-22
Revised 05/18/16
Illustrations are for demonstration purposes only.
Offset grip handles. *AVAILABLE BACK-TO-BACK.
110SL – 116SL OFFSET GRIP HANDLES
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
GH-110SL* – 5 7/8" center-to-center. – 3/4" handle width. – *AVAILABLE BACK-TO-BACK.
GH-112SL* – 6" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
6 5/
8"
2 1/8"
7/16"
1 7/8"
2 1/8"
1 7/
8"
5/8"
7"
2 1/2"
7/8"
2 1/2"
1 3/
4"
1 3/4"
7/16"
GH-116SL* – 15 1/8" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
16"
2 1/2"
7/8"
2 1/2"
1 3/
4"
1 3/4"
7/16"
Optional back-to-back mounting. (GH-110SL shown)
Handle Grip: Rectangular
GH-110SL 6 5/8” Small offset handle. 5 7/8” center-to-center.*
GH-112SL 7” Large offset handle. 6” center-to-center.*
GH-116SL 16” Large offset handle. 15 1/8” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-23
Revised 05/18/16
Illustrations are for demonstration purposes only.
C grip handles. *AVAILABLE BACK-TO-BACK.
345 C GRIP HANDLES
GH-345* – 9 3/4" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
12 1
/2"
3" 6 1/4"
1 3/
4"
7/8"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-345 shown)
Handle Grip: Oval
GH-345 12 1/2” C-shaped grip handle. 9 3/4” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-24
Revised 05/18/16
Illustrations are for demonstration purposes only.
D grip handles. *AVAILABLE BACK-TO-BACK.
6 – 12 D GRIP HANDLES
DH-9* – 8" center-to-center. – 3/4" handle width. – *AVAILABLE BACK-TO-BACK.
9"
1"2 1/4"
DH-12* – 12" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
12 7
/8"
7/8"3 1/4"
DH-6* – 6" center-to-center. – 3/4" handle width. – *AVAILABLE BACK-TO-BACK.
6 5/
8"
3/4"2"
DH-8* – 8" center-to-center. – 3/4" handle width. – *AVAILABLE BACK-TO-BACK.
8 7/
8"
3/4"2 3/4"
3/4" 3/
4"
1"
7/8"
7"
1"2"
1"
DH-9-6* – 6" center-to-center. – 3/4" handle width. – *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Center-to-center dimensions are not always as shown due to the shrinkage of the alloys. Please call with product SKU and finish for specific center-to-center dimensions.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (DH-6 shown)
Handle Grip: Round
DH-6 6 5/8” D grip handle. 6” center-to-center.*
DH-8 8 7/8” D grip handle. 8” center-to-center.*
DH-9 9” D grip handle. 8” center-to-center.*
DH-9-6 7” D grip handle. 6” center-to-center.*
DH-12 12 7/8” D grip handle. 12” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-25
Revised 05/18/16
Illustrations are for demonstration purposes only.
16 – 36 D GRIP HANDLES
D grip handles. *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Center-to-center dimensions are not always as shown due to the shrinkage of the alloys. Please call with product SKU and finish for specific center-to-center dimensions.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (DH-6 shown)
Handle Grip: Round
DH-16* – 16 3/16" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
17 1
/16"
7/8"3 1/4"
7/8"
DH-18* – 18 3/16" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
18 1
5/16
"
7/8"3 1/4"
7/8"
DH-24* – 24 3/8" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
25 1
/8"
7/8"3 1/4"
7/8"
DH-30* – 29 1/2" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
30 1
/4"
7/8"3 1/4"
7/8"
DH-36* – 36" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
36 7
/8"
7/8"3 1/4"
7/8"
DH-16 17 1/16” D grip handle. 16 3/16” center-to-center.*DH-18 18 15/16” D grip handle. 18 3/16” center-to-center.*DH-24 25 1/8” D grip handle. 24 3/8” center-to-center.*DH-30 30 1/4” D grip handle. 29 1/2” center-to-center.*DH-36 36 7/8” D grip handle. 36” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-26
Revised 05/18/16
Illustrations are for demonstration purposes only.
T grip handles. *AVAILABLE BACK-TO-BACK.
228T – 240T T GRIP HANDLES
GH-228T* – 10" center-to-center. – 5/8" handle width. – *AVAILABLE BACK-TO-BACK.
14"
5/8"2"
7/8"
1 1/
2"
9/16"
GH-240T* – 36" center-to-center. – 5/8" handle width. – *AVAILABLE BACK-TO-BACK.
40"
5/8"2"
7/8"
1 1/
2"
9/16"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-T228 shown)
Handle Grip: Square
GH-228T 14” T grip handle. 10” center-to-center.*GH-240T 40” T grip handle. 36” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-27
Revised 05/18/16
Illustrations are for demonstration purposes only.
Ridge grip handles. *AVAILABLE BACK-TO-BACK.
140 – 143 RIDGE GRIP HANDLES
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-143 shown)
Handle Grip: Round
GH-140 9” Ridge grip handle. 8” center-to-center.*
GH-141 9 5/8” Ridge grip handle. 8 5/8” center-to-center.*
GH-142 11” Ridge grip handle. 9 3/4” center-to-center.*
GH-143 13 3/4” Ridge grip handle. 12 1/2” center-to-center.*
GH-140* – 8" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
2 1/2"
9"
7/8"
GH-141* – 8 5/8" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
2 1/2"
9 5/
8"
7/8"
GH-142* – 9 3/4" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
3 1/4"
11"
1 1/4"
GH-143* – 12 1/2" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
3 1/4"
13 3
/4"
1 1/4"
6"
6 5/
8"
7"
5 3/
4"1
5/8"
1 5/
8"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-28
Revised 05/18/16
Illustrations are for demonstration purposes only.
Ridge grip handles. *AVAILABLE BACK-TO-BACK.
146 – 1432 RIDGE GRIP HANDLES
GH-1432* – 22" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
3 1/8"
32"
7/8"
1 1/4"
6 1/
4"15
3/4
"6
1/4"
GH-146* – 22 13/16" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
24"
3 1/2"1 1/4"
18 3
/8"
1 1/2"
2 3/4"
2"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-1432 shown)
Handle Grip: Round
GH-146 24” Ridge grip handle. 22 13/16” center-to-center.*GH-1432 32” Ridge grip handle. 22” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-29
Revised 05/18/16
Illustrations are for demonstration purposes only.
994R RIDGE GRIP HANDLES
Ridge grip handles. *AVAILABLE BACK-TO-BACK.
GH-994R* – 9 1/4" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
10"
1 1/4"2 5/8"
5/8"
1"
GH-994R 10” Ridge grip handle. 9 1/4” center-to-center.*
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-994R shown)
Handle Grip: Square, Raised Ridge
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-30
Revised 05/18/16
Illustrations are for demonstration purposes only.
Deco grip handles. *AVAILABLE BACK-TO-BACK.
961 DECO GRIP HANDLES
GH-961* – 7 5/8" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1"
8 1/
8"
1 7/8"
3/8"
7/16
"
7/16"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-961 shown)
Handle Grip: Rectangular, Stepped
GH-961 8 1/8” Deco grip handle. 7 5/8” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-31
Revised 05/18/16
Illustrations are for demonstration purposes only.
Wood inlay grip handles. *AVAILABLE BACK-TO-BACK.
W916 – W920 WOOD INLAY GRIP HANDLES
GH-W920* – 7 3/4" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
8 1/
4"
GH-W916* – 6 1/8" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
GH-W918* – 7 3/4" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1"
6 1/
2"
2"1"
8 1/
4"
2" 1"2"
1/2"
1/4"1/4"
7/16
"
7/16
"
5 1/
16"
5/16" 5/16" 5/16"
1 1/4"
18"
2"
11/1
6"
5/8"
GH-W925* – 17 3/8" center-to-center. – 1 1/4" handle width. – *AVAILABLE BACK-TO-BACK.
10"
Sun Valley Bronze uses ipe hardwood. Any hardwood may be supplied at no extra charge.Note: Inlay is available in S1/W1 finishes only.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-W918 shown)
Handle Grip: Rectangular
GH-W916 6 1/2” Inlay grip handle with center strip wood inlay. 6 1/8” center-to-center.*
GH-W918 8 1/4” Inlay grip handle with center strip wood inlay. 7 3/4” center-to-center.*
GH-W920 8 1/4” Inlay grip handle with wood inlay. 7 3/4” center-to-center.*
GH-W925 18” Inlay grip handle with wood inlay. 17 3/8” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-32
Revised 05/18/16
Illustrations are for demonstration purposes only.
Corduroy grip handles. *AVAILABLE BACK-TO-BACK.
1906 – 1983-12 CORDUROY GRIP HANDLES
GH-1906* – 6 1/16" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1"6
1/2"
1 7/8"
GH-1983* – 7 9/16" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1"
8"
2"
1/2" 1/
2"
3/8" 3/8"
GH-1983-12* – 11 1/2" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
1"
12"
2"
1/2"
3/8"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-1983 shown)
Handle Grip: Rectangular
GH-1906 6 1/2” Corduroy grip handle. 6 1/16” center-to-center.*
GH-1983 8” Corduroy grip handle. 7 9/16” center-to-center.*
GH-1983-12 12” Corduroy grip handle. 11 1/2” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-33
Revised 05/18/16
Illustrations are for demonstration purposes only.
Mesa grip handles. *AVAILABLE BACK-TO-BACK.
2108 – 2110 MESA GRIP HANDLES
GH-2108* – 6 1/8" center-to-center. – 1" handle width. – 1/8" Handle step. – *AVAILABLE BACK-TO-BACK.
6 1/
2"
1"2"
1/2"
5/16"
1/8"
GH-2110* – 9 1/4" center-to-center. – 1 1/8" handle width. – 1/8" Handle step. – *AVAILABLE BACK-TO-BACK.
10"
1 1/8"2 1/2"
3/4"
3/4"
1/8"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-2110 shown)
Handle Grip: Rectangular w/Slight Curve to Bottom
GH-2108 6 1/2” Mesa grip handle. 6 1/8” center-to-center.*
GH-2110 10” Mesa grip handle. 9 1/4” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-34
Revised 05/18/16
Illustrations are for demonstration purposes only.
GH-LB24-LH – GH-LB24-RH THE LIFT GRIP HANDLES
The Lift grip handles.
GH-LB24-LH – Left hand.
24"
2 1/4"
1 1/2"
3/8"
2"
GH-LB24-RH – Right hand.
24"
2 1/4"
1 1/2"
1 1/2"
2"
3/8"
1 1/2"
GH-LB24-LH 24” The Lift grip handle. Left hand.GH-LB24-RH 24” The Lift grip handle. Right hand.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-35
Revised 05/18/16
Illustrations are for demonstration purposes only.
Stanley grip handles. *AVAILABLE BACK-TO-BACK.
128 STANLEY GRIP HANDLES
GH-128* – 14 1/4" center-to-center. – 15/16" handle width. – *AVAILABLE BACK-TO-BACK.
15 1
/8"
7/8"2 11/16"
12"
GH-128 15 1/8” Stanley grip handle. 12” center-to-center.*
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-128 shown)
Handle Grip: Round w/Facets
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-36
Revised 05/18/16
Illustrations are for demonstration purposes only.
2315 GEM GRIP HANDLES
Gem grip handles. *AVAILABLE BACK-TO-BACK.
GH-2315* – Gem grip handle. – 14" center-to-center. – 1 1/8" handle width. – *AVAILABLE BACK-TO-BACK.
15 1
/2"
1 3/4"4 7/16"
2"
1/4"
GH-2315 15 1/2” Gem grip handle. 14” center-to-center.*
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-2315 shown)
Handle Grip: Faceted
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-37
Revised 05/18/16
Illustrations are for demonstration purposes only.
Bamboo grip handles. *AVAILABLE BACK-TO-BACK.
1312 – 1317R BAMBOO GRIP HANDLES
GH-1312* – 7 5/8" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
2 3/8"
12"
1"
GH-1312R* – 7 9/16" center-to-center. – 1" handle width. – *AVAILABLE BACK-TO-BACK.
2 1/2"
12"
1"
GH-1317* – 10 1/2" center-to-center. – 1 3/8" handle width. – *AVAILABLE BACK-TO-BACK.
3 1/2"
17 1
/2"
1 3/8"
GH-1317R* – 10 1/2" center-to-center. – 1 3/8" handle width. – *AVAILABLE BACK-TO-BACK.
3 1/2"
17 1
/2"
1 3/8"
15/1
6"
15/1
6" 1 3/
8"
1 3/
8"
1 3/
4"
1 3/
4"
2 7/
8"
2 7/
8"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-1312 shown)
Handle Grip: Round
GH-1312 12” Bamboo grip handle. 7 5/8” center-to-center.*
GH-1312R 12” Bamboo grip handle with rope detail. 7 9/16” center-to-center.*
GH-1317 17 1/2” Bamboo grip handle. 10 1/2” center-to-center.*
GH-1317R 17 1/2” Bamboo grip handle. 10 1/2” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-38
Revised 05/18/16
Illustrations are for demonstration purposes only.
1325 – 1326R BAMBOO GRIP HANDLES
Bamboo grip handles. *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-1312 shown)
Handle Grip: Round
GH-1325 25 1/4” Bamboo grip handle. 15” center-to-center.*
GH-1326R 25 3/4” Bamboo grip handle with rope detail. 16 3/8” center-to-center.*
GH-1325* – 15" center-to-center. – 1 3/8" handle width. – *AVAILABLE BACK-TO-BACK.
3 1/2"
25 1
/4"
1 3/8"
GH-1326R* – 16 3/8" center-to-center. – 1 3/8" handle width. – *AVAILABLE BACK-TO-BACK.
3 1/2"
25 3
/4"
1 3/8"
1 3/
8"
1 3/
8"
4 3/
8"
3 7/
8"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-39
Revised 05/18/16
Illustrations are for demonstration purposes only.
Twig grip handles. *AVAILABLE BACK-TO-BACK.
TWIG GRIP HANDLES
GH-TWG18* – 12 7/8" center-to-center. – 7/8" handle width. – *AVAILABLE BACK-TO-BACK.
17 1
/4"
7/8"2 1/2"
3/4"
1 7/
8"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-TWG18 shown)
Handle Grip: Round
GH-TWG18 17 1/4” Twig grip handle. 12 7/8” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-40
Revised 05/18/16
Illustrations are for demonstration purposes only.
Scalloped grip handles. *AVAILABLE BACK-TO-BACK.
618 – 630 SCALLOPED GRIP HANDLES
GH-618* – 10 1/2" center-to-center. – 1 3/4" handle width. – *AVAILABLE BACK-TO-BACK.
18 1
/8"
1 3/4"2 1/2"1
9/16
"3"
3/4"
GH-630* – 19 9/16" center-to-center. – 1 3/4" handle width. – *AVAILABLE BACK-TO-BACK.
30 1
/8"
1 3/4"2 1/2"
1 9/
16"
4 1/
2"
3/4"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (GH-618 shown)
Handle Grip: Square
GH-618 18 1/8” Scalloped grip handle. 10 1/2” center-to-center.*
GH-630 30 1/8” Scalloped grip handle. 19 9/16” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-41
Revised 05/18/16
Illustrations are for demonstration purposes only.
TWIST GRIP HANDLES
Twist grip handles. *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.GH-TWIST36 weighs 33 lbs each.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
GH-TWIST36* – 26" center-to-center. – 2" handle width. – *AVAILABLE BACK-TO-BACK.
36"
2"5"
2"4"
4"
3"
Optional back-to-back mounting. (GH-TWIST36 shown)
Handle Grip: Round
GH-TWIST36 36” Twist grip handle. 26” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-42
Revised 05/18/16
Illustrations are for demonstration purposes only.
WARP GRIP HANDLES
Warp grip handles. *AVAILABLE BACK-TO-BACK.
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.
Upcharge for back-to-back mountingBTB Upcharge
GH-WARP8* – 1/2" handle width. – 1 1/2" center-to-center. – *AVAILABLE BACK-TO-BACK.
7 3/
4"
2 1/
2"
15/16"
1/2"
3" 3 11/16"
3/4"
Optional back-to-back mounting. (GH-WARP8 shown)
GH-WARP8 7 3/4” Warp grip handle. 1 1/2” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-43
Revised 05/18/16
Illustrations are for demonstration purposes only.
Gazelle grip handles. *AVAILABLE BACK-TO-BACK.
GAZELLE GRIP HANDLES
GH-GAZELLE-LH* – 13 11/16" center-to-center. – 1 1/2" handle width. – *AVAILABLE BACK-TO-BACK.
24 5
/8"
7/8"
1/2"
7/8"
GH-GAZELLE-RH* – 13 11/16" center-to-center. – 1 1/2" handle width. – *AVAILABLE BACK-TO-BACK.
6 1/
2"
1 1/2"
1 3/4"
24 5
/8"
7/8"
1/2"
7/8"
6 1/2"
1 1/
2"
1 3/
4"
4 3/8"4 3/8"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
GH-GAZELLE-LH 24 5/8” Gazelle grip handle. Left hand. 13 11/16” center-to-center.*GH-GAZELLE-RH 24 5/8” Gazelle grip handle. Right hand. 13 11/16” center-to-center.*
Optional back-to-back mounting. (GH-GAZELLE shown)
Handle Grip: Round
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-44
Revised 05/18/16
Illustrations are for demonstration purposes only.
Aztec grip handles. *AVAILABLE BACK-TO-BACK.
AZT-350 AZTEC GRIP HANDLES
AZT-350* – 10" center-to-center. – *AVAILABLE BACK-TO-BACK.
18 1
/4"
1 1/8" 7"
2 1/2"
Thru bolts provided. Please provide thickness.Please provide door thickness when mounting back-to-back.Back-to-back grip handle orders do NOT qualify for return and are non-refundable.Upcharge for back-to-back mountingBTB Upcharge
Optional back-to-back mounting. (AZT-350 shown)
AZT-350 18 1/4” Aztec grip handle. 10” center-to-center.*
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-45
Revised 05/18/16
Illustrations are for demonstration purposes only.
Fly rod grip handles.
FLY ROD GRIP HANDLES
GH-FLYROD – 12 3/8" center-to-center. – Specify overall length. – Right hand shown
19 3
/8"
3 1/4"
Front View Side View Overall View
58"
2 3/4"
7/8"
1 1/4"
12 3
/8"
c-t-c
3 3/4"
Thru-bolt provided. Specify door thickness.Please specify cut length.Always specify handing.Optional 3rd mounting post available. Specify spacing.
GH-FLYROD Fly rod grip handle. 12 3/8” center-to-center.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-46
Revised 05/18/16
Illustrations are for demonstration purposes only.
Bamboo push plates.
1320 BAMBOO PUSH PLATES
PP-132018
"
2 1/2"
PP-1320 2 1/2” x 18” Bamboo push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-47
Revised 05/18/16
Illustrations are for demonstration purposes only.
Half round push plates.
HR07 – HR15 HALF ROUND PUSH PLATES
PP-HR07 3 1/2” x 7” x 1/8” Contemporary half round push plate.
PP-HR09 4 9/16” x 9 1/8” x 1/8” Contemporary half round push plate.
PP-HR15 7 1/2” x 15” x 1/4” Bevel half round push plate.
PP-HR07
3 1/2"7"
PP-HR09
4 9/16"
9 1/
8"PP-HR15
7 1/2"
15"
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-48
Revised 05/18/16
Illustrations are for demonstration purposes only.
404 – 410 BEVEL EDGE PUSH PLATES
PP-404 PP-405 PP-406
4 1/
2"
2 1/2"6"
1 3/4" 2 1/2"
6"
PP-408
8 3/
4"
2 1/2"
PP-409 PP-410
10"
10"
3"
PP-407
2"
8 3/
4"
2 1/2"
Bevel Edge push plates.
PP-404 2 1/2” x 4 1/2” Bevel Edge push plate.
PP-405 1 3/4” x 6” Bevel Edge push plate.
PP-406 2 1/2” x 6” Bevel Edge push plate.
PP-407 2” x 8 3/4” Bevel Edge push plate.
PP-408 2 1/2” x 8 3/4” Bevel Edge push plate.
PP-409 2 1/2” x 10” Bevel Edge push plate.
PP-410 3” x 10” Bevel Edge push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-49
Revised 05/18/16
Illustrations are for demonstration purposes only.
Bevel Edge push plates.
601 – 702 BEVEL EDGE PUSH PLATES
13"
3"
13"
3 1/2"
PP-601 PP-602
17 3
/4"
2 1/2"
PP-700PP-690
18"
2"
17 3
/4"
3"
PP-701
17 3
/4"
3 1/2"
PP-702
PP-601 3” x 13” Bevel Edge push plate.
PP-602 3 1/2” x 13” Bevel Edge push plate.
PP-690 2” x 18” Bevel Edge push plate.
PP-700 2 1/2” x 17 3/4” Bevel Edge push plate.
PP-701 3” x 17 3/4” Bevel Edge push plate.
PP-702 3 1/2” x 17 3/4” Bevel Edge push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-50
Revised 05/18/16
Illustrations are for demonstration purposes only.
Bevel Edge push plates.
800 – 852 BEVEL EDGE PUSH PLATES
3"
20 3
/4"
PP-801
20"
PP-802
3 1/2"2 1/2"
PP-800
10 1
/2"
1 1/2"
PP-811
23"
PP-852
3 1/2"
19 3
/4"
PP-800 2 1/2” x 19 3/4” Bevel Edge push plate.
PP-801 3” x 20 3/4” Bevel Edge push plate.
PP-802 3 1/2” x 20” Bevel Edge push plate.
PP-811 1 1/2” x 10 1/2” Bevel Edge push plate.
PP-852 3 1/2” x 23” Bevel Edge push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-51
Revised 05/18/16
Illustrations are for demonstration purposes only.
A404 – A410 ARCH PUSH PLATES
PP-A404 PP-A405
2 1/2"
5 3/
4"
1 3/4"
7 1/
2"
PP-A406
2 1/2"
7 1/
2"PP-A407 PP-A408
2"
8 3/
4"
9 1/
4"
PP-A409
2 1/2"
11"
2 1/2"
PP-A410
3"
11 1
/2"
Arch push plates.
PP-A404 2 1/2” x 5 3/4” Arch push plate.
PP-A405 1 3/4” x 7 1/2” Arch push plate.
PP-A406 2 1/2” x 7 1/2” Arch push plate.
PP-A407 2” x 8 3/4” Arch push plate.
PP-A408 2 1/2” x 9 1/4” Arch push plate.
PP-A409 2 1/2” x 11” Arch push plate.
PP-A410 3” x 11 1/2” Arch push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-52
Revised 05/18/16
A601 – A800 ARCH PUSH PLATESIllustrations are for demonstration purposes only.
Arch push plates.
PP-A602PP-A601
3"
14 1
/2"
3 1/2"
15 1
/4"
PP-A700
2 1/2"
19"
PP-A701
3"
19"
PP-A702
3 1/2"
19"
PP-A800
21"
2 1/2"
PP-A601 3” x 14 1/2” Arch push plate.
PP-A602 3 1/2” x 15 1/4” Arch push plate.
PP-A700 2 1/2” x 19” Arch push plate.
PP-A701 3” x 19” Arch push plate.
PP-A702 3 1/2” x 19” Arch push plate.
PP-A800 2 1/2” x 21” Arch push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-53
Revised 05/18/16
Illustrations are for demonstration purposes only.
Arch push plates.
A801 – A852 ARCH PUSH PLATES
PP-A811
1 1/2"
10 1
/2"
PP-A852
23 1
/2"
3 1/2"
PP-A802
21 1
/2"
3 1/2"
PP-A801
21"
3"
PP-A801 3” x 21” Arch push plate.
PP-A802 3 1/2” x 21 1/2” Arch push plate.
PP-A811 1 1/2” x 10 1/2” Arch push plate.
PP-A852 3 1/2” x 23 1/2” Arch push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-54
Revised 05/18/16
Illustrations are for demonstration purposes only.
Oval push plates.
OP400 – OP700 OVAL PUSH PLATES
OP-400 OP-500
2 1/2"4
1/4"
2 5/8"
5 1/
4"
OP-600
2 7/8"
7 1/
4"
OP-700
3"
8 3/
4"
PP-OP400 2 1/2” x 4 1/4” Oval push plate.
PP-OP500 2 5/8” x 5 1/4” Oval push plate.
PP-OP600 2 7/8” x 7 1/4” Oval push plate.
PP-OP700 3” x 8 3/4” Oval push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-55
Revised 05/18/16
Illustrations are for demonstration purposes only.
9404 – 912 CONTEMPORARY PUSH PLATES
PP-9404
2 1/2"
4 1/
2"
PP-902
3"
16"
PP-910
2"
18"
PP-911
2 1/2"
18"
2" 2 1/2"
PP-900
16"
PP-901
16"
PP-912
3"
18"
Contemporary push plates.
PP-9404 2 1/2” x 4 1/2” Contemporary push plate.
PP-900 2” x 16” Contemporary push plate.
PP-901 2 1/2” x 16” Contemporary push plate.
PP-902 3” x 16” Contemporary push plate.
PP-910 2” x 18” Contemporary push plate.
PP-911 2 1/2” x 18” Contemporary push plate.
PP-912 3” x 18” Contemporary push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-56
Revised 05/18/16
914 – 954 CONTEMPORARY PUSH PLATESIllustrations are for demonstration purposes only.
Contemporary push plates.
PP-950
2"
8 3/
4"
PP-949
2"
6"
PP-951
10"
2"
PP-952
10"
2 1/2"
PP-914
18"
3 1/2"
PP-9206
20"
6"
PP-9206 6” x 20” Contemporary push plate.
PP-914 3 1/2” x 18” Contemporary push plate.
PP-949 2” x 6” Contemporary push plate.
PP-950 2” x 8 3/4” Contemporary push plate.
PP-951 2” x 10” Contemporary push plate.
PP-952 2 1/2” x 10” Contemporary push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-57
Revised 05/18/16
Illustrations are for demonstration purposes only.
Contemporary push plates.
955 – 980 CONTEMPORARY PUSH PLATES
PP-955
3"
10"
PP-980
1 1/2"
10 1
/2"
PP-979
6"
1 1/2"
PP-957
3"
12"
PP-954
2 1/2"
6"
PP-953
2 1/2"
8 3/
4"
PP-953 2 1/2” x 8 3/4” Contemporary push plate.
PP-954 2 1/2” x 6” Contemporary push plate.
PP-955 3” x 10” Contemporary push plate.
PP-957 3” x 12” Contemporary push plate.
PP-979 1 1/2” x 6” Contemporary push plate.
PP-980 1 1/2” x 10 1/2” Contemporary push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-58
Revised 05/18/16
Illustrations are for demonstration purposes only.
Fleur de Lis push plates.
1224 – 1250 FLEUR DE LIS PUSH PLATES
PP-1240
1 3/4"
15 5
/8"
PP-1245
2 1/2"
15 1
/2"
PP-1250
3"
21 1
/2"
PP-1225
3"
29"
PP-1224
2 1/2"
29"
PP-1224 2 1/2” x 29” Fleur de Lis push plate.
PP-1225 3” x 29” Fleur de Lis push plate.
PP-1240 1 3/4” x 15 5/8” Fleur de Lis push plate.
PP-1245 2 1/2” x 15 1/2” Fleur de Lis push plate.
PP-1250 3” x 21 1/2” Fleur de Lis push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-59
Revised 05/18/16
Illustrations are for demonstration purposes only.
Ridge push plates.
324 – 422 RIDGE PUSH PLATES
PP-325
2 1/2"
6"
PP-326
3"
6"
PP-421
2 1/2"
8 3/
4"
PP-422
3"
10"
PP-324
2 1/2"
4 1/
2"
PP-324 2 1/2” x 4 1/2” Ridge push plate.
PP-325 2 1/2” x 6” Ridge push plate.
PP-326 3” x 6” Ridge push plate.
PP-421 2 1/2” x 8 3/4” Ridge push plate.
PP-422 3” x 10” Ridge push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-60
Revised 05/18/16
Illustrations are for demonstration purposes only.
Ridge push plates.
423 – 722 RIDGE PUSH PLATES
PP-423
2 1/2"12
"
PP-721
3"
18"
PP-424
3"
13"
PP-425
2 1/2"
10"
PP-722
3"
20 3
/4"
PP-423 2 1/2” x 12” Ridge push plate.
PP-424 2 1/2” x 10” Ridge push plate.
PP-425 3” x 13” Ridge push plate.
PP-721 3” x 18” Ridge push plate.
PP-722 3” x 20 3/4” Ridge push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-61
Revised 05/18/16
Illustrations are for demonstration purposes only.
Corrugated w/Band push plates.
336 – 731 CORRUGATED w/BAND PUSH PLATES
3 1/2"
7"
P-336
3 1/2"
10"
P-431 EP-731
3 1/2"
19"
PP-336 3 1/2” x 7” Corrugated w/Band push plate.
PP-431 3 1/2” x 10” Corrugated w/Band push plate.
PP-731 3 1/2” x 19” Corrugated w/Band push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-62
Revised 05/18/16
Illustrations are for demonstration purposes only.
Hampton push plates.
346 – 741 HAMPTON PUSH PLATES
PP-346
3 3/8"
7"
PP-440
2 1/2"
10"
PP-741
19 1
/2"
3 3/8"
PP-441
3 3/8"
11 1
/2"
PP-346 3 3/8” x 7” Hampton push plate.
PP-440 2 1/2” x 10” Hampton push plate.
PP-441 3 3/8” x 11 1/2” Hampton push plate.
PP-741 3 3/8” x 19 1/2” Hampton push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-63
Revised 05/18/16
Illustrations are for demonstration purposes only.
Trellis push plates.
356 – 751 TRELLIS PUSH PLATES
PP-356
3 1/2"
6 5/
8"
PP-451
3 1/2"
10 1
/2"
3 1/2"
18 1
/2"
PP-751
1/4"
1/4"
1/4"
PP-356 3 1/2” x 6 5/8” Trellis push plate.
PP-451 3 1/2” x 10 1/2” Trellis push plate.
PP-751 3 1/2” x 18 1/2” Trellis push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-64
Revised 05/18/16
Illustrations are for demonstration purposes only.
Deco push plates.
366 – 761 DECO PUSH PLATES
PP-366
3"7
1/2"
PP-461
12"
3"
PP-761
20"
3"
PP-366 3” x 7 1/2” Deco push plate.
PP-461 3” x 12” Deco push plate.
PP-761 3” x 20” Deco push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-65
Revised 05/18/16
Illustrations are for demonstration purposes only.
Corrugated push plates.
1406 – 1418 CORRUGATED PUSH PLATES
2 1/2"6"
PP-1406
2 1/2"
10"
PP-1410
2 1/2"
18"
PP-1418
2 1/2"
8 3/
4"
PP-1408
PP-1406 2 1/2” x 6” Corrugated push plate.
PP-1408 2 1/2” x 8 3/4” Corrugated push plate.
PP-1410 2 1/2” x 10” Corrugated push plate.
PP-1418 2 1/2” x 18” Corrugated push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-66
Revised 05/18/16
Illustrations are for demonstration purposes only.
1506 – 1519 BANDBOX PUSH PLATES
Bandbox push plates.
PP-1506
2 1/2"
6"
PP-1510
2 1/2"
10"
PP-1518
2 1/2"
18"
PP-1519
18"
3"
PP-1511
10"
3"
1/4"
1/4" 1/4"
1/4" 1/4"
3 1/2"
PP-1512
11 1
/2"
1/4"
PP-1506 2 1/2” x 6” Bandbox push plate.
PP-1510 2 1/2” x 10” Bandbox push plate.
PP-1511 3” x 10” Bandbox push plate.
PP-1512 3 1/2” x 11 1/2” Bandbox push plate.
PP-1518 2 1/2” x 18” Bandbox push plate.
PP-1519 3” x 18” Bandbox push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-67
Revised 05/18/16
Illustrations are for demonstration purposes only.
Hand peened push plates. Hand peened orders do NOT qualify for return and are non-refundable.
HP1506 – HP1519 HAND PEENED PUSH PLATES
PP-HP1506
2 1/2"
6"
PP-HP1510
2 1/2"
10"
PP-HP1518
2 1/2"
18"
PP-HP1519
3"
18"
PP-HP1511
3"
10"
PP-HP1512
3 1/2"
11 1
/2"
1/4"
1/4" 1/4"
1/4" 1/4"
1/4"
PP-HP1506 2 1/2” x 6” Hand Peened push plate.
PP-HP1510 2 1/2” x 10” Hand Peened push plate.
PP-HP1511 3” x 10” Hand Peened push plate.
PP-HP1512 3 1/2” x 11 1/2” Hand Peened push plate.
PP-HP1518 2 1/2” x 18” Hand Peened push plate.
PP-HP1519 3” x 18” Hand Peened push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-68
Revised 05/18/16
Illustrations are for demonstration purposes only.
Wood inlay push plates. Inlay orders do NOT qualify for return and are non-refundable.
WH1610 – WV1610 WOOD INLAY PUSH PLATES
P-WH1610RH
2 1/2"
10"
P-WV1610RH
2 1/2"
10"
1/4"
1/4"
1/4"
P-WH1610LH
2 1/2"
10"
P-WV1610LH
2 1/2"
10"
1/4"1/
4"1/4"
Always specify handing.Inlay is available in S1/W1 finishes only.
PP-WH1610RH 2 1/2” x 10” Horizontal Inlay push plate. Right hand.
PP-WH1610LH 2 1/2” x 10” Horizontal Inlay push plate. Left hand.
PP-WV1610RH 2 1/2” x 10” Vertical Inlay push plate. Right hand.
PP-WV1610LH 2 1/2” x 10” Vertical Inlay push plate. Left hand.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-69
Revised 05/18/16
Illustrations are for demonstration purposes only.
Circles push plates.
1711 – 1718 CIRCLES PUSH PLATES
2 1/2"
11 1
/8"
PP-1711
2 1/2"
18"
PP-1718
2"
2"
PP-1711 2 1/2” x 11 1/8” Circles push plate.
PP-1718 2 1/2” x 18” Circles push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-70
Revised 05/18/16
Illustrations are for demonstration purposes only.
Squares push plates.
1811 – 1818 SQUARES PUSH PLATES
PP-1811
2 1/2"
11 3
/4"
PP-1818
2 1/2"
18"
2 1/
8"
2 1/
8"
PP-1811 2 1/2” x 11 3/4” Squares push plate.
PP-1818 2 1/2” x 18” Squares push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-71
Revised 05/18/16
Illustrations are for demonstration purposes only.
Corduroy push plates.
1906 – 1913 CORDUROY PUSH PLATES
PP-1906
2 1/2"
6"
8 3/
4"
2 1/2"
PP-190810
"
2 1/2"
PP-1910
13"
3"
PP-1912
13"
3"
PP-1912 PP-1913
3 1/2"
13"
PP-1906 2 1/2” x 6” Corduroy push plate.
PP-1908 2 1/2” x 8 3/4” Corduroy push plate.
PP-1910 2 1/2” x 10” Corduroy push plate.
PP-1912 3” x 13” Corduroy push plate.
PP-1913 3 1/2” x 13” Corduroy push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-72
Revised 05/18/16
Illustrations are for demonstration purposes only.
Corduroy push plates.
18"
3 1/2"
PP-1916 PP-1918
16"
3"
21"
3 1/2"
PP-1919
1916 – 1919 CORDUROY PUSH PLATES
PP-1916 3” x 16” Corduroy push plate.
PP-1918 3 1/2” x 18” Corduroy push plate.
PP-1919 3 1/2” x 21” Corduroy push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-73
Revised 05/18/16
Illustrations are for demonstration purposes only.
2104 – 2120 MESA PUSH PLATES
Mesa push plates.
PP-2106PP-2104
2 1/4"2 1/4"
2 1/4"
PP-2108
1 3/4"
PP-2109
9"
2 1/4"
PP-2120
4" 6"
8 3/
4"
16"
2 1/4"
PP-2110
10"
2"
PP-2107
8 3/
4"
PP-2104 2 1/4” x 4” Mesa push plate.
PP-2106 2 1/4” x 6” Mesa push plate.
PP-2107 2” x 8 3/4” Mesa push plate.
PP-2108 2 1/4” x 8 3/4” Mesa push plate.
PP-2109 1 3/4” x 9” Mesa push plate.
PP-2110 2 1/4” x 10” Mesa push plate.
PP-2120 2 1/4” x 16” Mesa push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-74
Revised 05/18/16
Illustrations are for demonstration purposes only.
Burlap push plates.
2204 – 2200 BURLAP PUSH PLATES
PP-2208PP-2204 PP-2206 PP-2210 PP-2200
2 1/2"2 1/2"
4" 6"
2 1/2"
8 3/
4"
2 1/2"
10"
18"
2 1/2"
PP-2204 2 1/2” x 4” Burlap push plate.
PP-2206 2 1/2” x 6” Burlap push plate.
PP-2208 2 1/2” x 8 3/4” Burlap push plate.
PP-2210 2 1/2” x 10” Burlap push plate.
PP-2200 2 1/2” x 18” Burlap push plate.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
19-75
Revised 05/18/16
Illustrations are for demonstration purposes only.
2401 – 2410 RIDGE BURLAP PUSH PLATES
Ridge Burlap push plates.
PP-2406
2 1/2"
6"PP-2408
2 1/2"
8 3/
4"
PP-2410
3"
10"
PP-2403
3 1/2"
18"
PP-2401
3"
20 3
/4"
PP-2401 3” x 20 3/4” Ridge Burlap push plate.
PP-2403 3 1/2” x 18” Ridge Burlap push plate.
PP-2406 2 1/2” x 6” Ridge Burlap push plate.
PP-2408 2 1/2” x 8 3/4” Ridge Burlap push plate.
PP-2410 3” x 10” Ridge Burlap push plate.