Spartacus Oil&Gas - flame spray coating system - Tecno Supply
description
Transcript of Spartacus Oil&Gas - flame spray coating system - Tecno Supply
IBIX SRLIBIX SRL
Via La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALYVia La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALYTel. +39 0545 994589 - Fax +39 0545 994567Tel. +39 0545 994589 - Fax +39 0545 [email protected] - [email protected] - www.tecnosupply.com
IBIX SRL
Via La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALYTel. +39 0545 994589 - Fax +39 0545 [email protected] - www.tecnosupply.com
© Copyright IBIX Srl 2013© Copyright IBIX Srl 2013® Registered Trademarks of IBIX S.r.l. ® Registered Trademarks of IBIX S.r.l.
© Copyright IBIX Srl 2013® Registered Trademarks of IBIX S.r.l.
IL SISTEMA DI RIVESTIMENTO A FIAMMA IL SISTEMA DI RIVESTIMENTO A FIAMMA PERFETTO PER GLI OPERATORI DEL SETTORE OIL & GAS PERFETTO PER GLI OPERATORI DEL SETTORE OIL & GAS
E DELLE VERNICIATURE CONTO TERZIE DELLE VERNICIATURE CONTO TERZIPRESTAZIONI ELEVATE E VERSATILITÀ IN UN SISTEMA COMPATTOPRESTAZIONI ELEVATE E VERSATILITÀ IN UN SISTEMA COMPATTO
IL SISTEMA DI RIVESTIMENTO A FIAMMA PERFETTO PER GLI OPERATORI DEL SETTORE OIL & GAS
E DELLE VERNICIATURE CONTO TERZIPRESTAZIONI ELEVATE E VERSATILITÀ IN UN SISTEMA COMPATTO
OIL&GAS
DATI TECNICIDATI TECNICI
PISTOLE - VERSIONI SPECIALIPISTOLE - VERSIONI SPECIALI
DATI TECNICI
Dimensioni d'ingombro:
LARGHEZZA: 700 mm (27.56 inch.)LUNGHEZZA: 650 mm (25.59 inch)ALTEZZA: 1050 mm (41.34 inch.)
Ÿ Necessita solo di aria compressa essiccata e GPL Ÿ Requisiti d'aria minimi: 1000 l al minuto; aria secca e
refrigerata; pressione costante di 6 bar;Ÿ GPL - contenuto minimo di propano: 50% - 60%;Ÿ Pressione minima del GPL: costante a 3 bar.
Ÿ Portatile e semplice da usareŸ Sistema di alimentazione della polvere ad altissimo flussoŸ Ruote larghe per un trasporto più semplice su terreni
accidentatiŸ Connessioni tramite raccordi rapidi con tubi identificabili in
base al colore collegati alla macchinaŸ Controllo diretto del volume della polvere sulla macchinaŸ Adatto per l'applicazione di un rivestimento PP10 dallo
spessore di 12mm o più in una singola operazione di rivestimento
PISTOLE DI VARIE DIMENSIONI per tutte le operazioni
Ÿ Pistola Grande - adatta per giunti, buckle arrestors e curve in condutture di ampie dimensioni.
Ÿ Pistola Media - adatta per giunti di tubi dal diametro minore; Ÿ Pistola Piccola - ideale per giunti di tubi più piccoli e per
riparazioni e ritocchi; PISTOLE - VERSIONI SPECIALI
Nuove Pistole con “fessure” poste sull'estremità per ottimizzare la ventilazione della pistola e mantenere una temperatura dell'apparecchio più bassa
Nuova Pistola CENTURION per una spruzzatura a ventaglio più ampia.
a division of
a division of
Pistola Grande con ManigliaPistola Grande con ManigliaPistola Grande con Maniglia
Comandi sulla MacchinaComandi sulla MacchinaComandi sulla Macchina
More and more committed to the Oil&Gas IndustryMore and more committed to the Oil&Gas IndustryMore and more committed to the Oil&Gas Industry
La Pistola Spartacus Piccola viene utilizzata con successo per effettuare riparazioni di rivestimenti esistenti grazie alla fiamma controllata e al getto di polvere preciso.
Nuovo Sistema EXTRA-COOLINGNuovo Sistema EXTRA-COOLINGNuovo Sistema EXTRA-COOLING
Piccola
Media
Grande
NUOVO SISTEMA EXTRA-COOLING con scambiatore di calore per una spruzzatura a fiamma prolungata, utile soprattutto in impianti di rivestimento automatici.
Pistola Piccola Pistola Piccola per Riparazioni e Ritocchiper Riparazioni e RitocchiPistola Piccola per Riparazioni e Ritocchi
I rivestimenti in PP applicati sul campo con spruzzatura a fiamma (come il
Polipropilene Plascoat PP10, distribuito da Tecno Supply) sono sostanzialmente
uguali agli strati protettivi applicati sul tubo in produzione. Questo assicura che
quando tali rivestimenti saranno applicati formeranno un legame perfettamente
omogeneo con i rivestimenti applicati in fabbrica, come ad esempio il PP estruso.
Il risultato sarà un rivestimento completamente fuso con lo strato di poliolefina
presente sul corpo del tubo, formando così un rivestimento omogeneo che
proteggerà giunti, curve e raccorderia.
Il più avanzato progresso tecnologico degli ultimi anni Il più avanzato progresso tecnologico degli ultimi anni nel settore industriale del rivestimento dei giunti in PP e PE.nel settore industriale del rivestimento dei giunti in PP e PE.
Il più avanzato progresso tecnologico degli ultimi anni nel settore industriale del rivestimento dei giunti in PP e PE.
NUOVA PISTOLA CENTURIONNUOVA PISTOLA CENTURIONLA PISTOLA PIÙ EFFICACE DEL SUO TEMPO LA PISTOLA PIÙ EFFICACE DEL SUO TEMPO
®CON TECNOLOGIA IBIX SRL ®CON TECNOLOGIA IBIX SRL
ECCEZIONALE SPRUZZATURA A VENTAGLIO ECCEZIONALE SPRUZZATURA A VENTAGLIO DISPONIBILE CON LE PISTOLE SPARTACUS DI MEDIE E GRANDI DISPONIBILE CON LE PISTOLE SPARTACUS DI MEDIE E GRANDI
DIMENSIONIDIMENSIONI
NUOVA PISTOLA CENTURIONLA PISTOLA PIÙ EFFICACE DEL SUO TEMPO
®CON TECNOLOGIA IBIX SRL
ECCEZIONALE SPRUZZATURA A VENTAGLIO DISPONIBILE CON LE PISTOLE SPARTACUS DI MEDIE E GRANDI
DIMENSIONI
SPRUZZURA A VENTAGLIO PIU' AMPIA (oltre 10 cm con la Pistola CENTURION Grande) che offre:
Ÿ Spruzzatura più veloce e strati più uniformi (un maggiore flusso di polvere si diffonde su un'area molto più grande)
Ÿ Sovrapposizione più facile delle passate e migliore fuoriuscita della polvere
Ÿ Nessuna striscia o accumulo di polvereŸ Minimizza il rischio di polvere non fusa con aria intrappolata
nel rivestimentoSpartacus nel rivestimento a fiamma Spartacus nel rivestimento a fiamma
di Giunti in 3LPE e 3LPPdi Giunti in 3LPE e 3LPPSpartacus nel rivestimento a fiamma
di Giunti in 3LPE e 3LPP
AUTOMAZIONEAUTOMAZIONEAUTOMAZIONE
BENEFICI OFFERTI DALLE NOSTRE PISTOLE APPOSITAMENTE PROGETTATE:
Ÿ Fiamma corta e forte, per far passare la polvere attraverso la fiamma il più rapidamente possibile
Ÿ La polvere viene spinta velocemente attraverso la fiammaŸ Il flusso d'aria trasportatore della polvere, la protegge dalla degradazione
consentendo così un OIT più alto*
*i valori di OIT dipendono altresì dalla qualità della polvere utilizzata. PLASCOAT PP10, insieme al nostro Spartacus Oil & Gas, può offrire un OIT > 40 minuti.
RIVESTIMENTI APPLICATI IN PRODUZIONE TRAMITE SPRUZZATURA A FIAMMA CON SPARTACUS
Ÿ Maggiore velocitàŸ Ideale per sistemi 3LPP o 3LPEŸ Permette l'applicazione di un rivestimento a spessori da 2 a 12* mm (o
più) in una sola operazione;Ÿ Processo di rivestimento più veloce rispetto alla spruzzatura
elettrostatica multipla o al metodo della sinterizzazione;Ÿ Risparmio energetico (non necessita di ripetuti passaggi in forno per la
rifusione della polvere applicata)
*dipende dalla qualità di polvere utilizzata (lo spessore può variare)
Spruzzatura a Ventaglio Ÿ Solo con le pistole CENTURION
Buckle Arrestor rivestiti con PP Buckle Arrestor rivestiti con PP tramite spruzzatura a fiamma automatizzatatramite spruzzatura a fiamma automatizzata
Buckle Arrestor rivestiti con PP tramite spruzzatura a fiamma automatizzata
Getto della polvere a forma ellitticaGetto della polvere a forma ellitticaGetto della polvere a forma ellittica
Sistema automatico per il rivestimento di curveSistema automatico per il rivestimento di curveSistema automatico per il rivestimento di curve
L'automazione nella spruzzatura a fiamma L'automazione nella spruzzatura a fiamma per l'Industria Oil & Gasper l'Industria Oil & GasL'automazione nella spruzzatura a fiamma per l'Industria Oil & Gas
Sempre liscio, anche nei rivestimenti Sempre liscio, anche nei rivestimenti su condutture di tutte le tagliesu condutture di tutte le taglie
e raccordi con strato PP spesso e perfettamente fusoe raccordi con strato PP spesso e perfettamente fuso
Sempre liscio, anche nei rivestimenti su condutture di tutte le taglie
e raccordi con strato PP spesso e perfettamente fuso
Ÿ Elimina il fattore “umano”Ÿ Consistenza e ripetibilitàŸ SicurezzaŸ Omogeneità del rivestimentoŸ Velocità
Alcune delle funzioni e controlli elettronici permessi dal nostro PLC:
NEW!!! NEW!!! PAT. PEND.PAT. PEND.NEW!!! PAT. PEND.
E' possibile automatizzare il processo di Rivestimento a Fiamma, ad esempio per buckle arrestors, sezioni di condutture e curve
Ÿ Accensione e spegnimento automatico della fiamma
Ÿ Accensione e spegnimento automatico della polvere
Ÿ Impostazione automatica delle fiamme per la modalità operativa (dopo l'accensione)
Ÿ Dispositivi di sicurezza: fotocellule rilevatrici p r e s e n z a f i a m m a p e r r i l e v a z i o n e dell'eventuale spegnimento delle stesse con l'arresto automatico del flusso gas
Ÿ Sistema di allarme per livello di polvere basso
I rivestimenti in PP applicati sul campo con spruzzatura a fiamma (come il
Polipropilene Plascoat PP10, distribuito da Tecno Supply) sono sostanzialmente
uguali agli strati protettivi applicati sul tubo in produzione. Questo assicura che
quando tali rivestimenti saranno applicati formeranno un legame perfettamente
omogeneo con i rivestimenti applicati in fabbrica, come ad esempio il PP estruso.
Il risultato sarà un rivestimento completamente fuso con lo strato di poliolefina
presente sul corpo del tubo, formando così un rivestimento omogeneo che
proteggerà giunti, curve e raccorderia.
Il più avanzato progresso tecnologico degli ultimi anni Il più avanzato progresso tecnologico degli ultimi anni nel settore industriale del rivestimento dei giunti in PP e PE.nel settore industriale del rivestimento dei giunti in PP e PE.
Il più avanzato progresso tecnologico degli ultimi anni nel settore industriale del rivestimento dei giunti in PP e PE.
NUOVA PISTOLA CENTURIONNUOVA PISTOLA CENTURIONLA PISTOLA PIÙ EFFICACE DEL SUO TEMPO LA PISTOLA PIÙ EFFICACE DEL SUO TEMPO
®CON TECNOLOGIA IBIX SRL ®CON TECNOLOGIA IBIX SRL
ECCEZIONALE SPRUZZATURA A VENTAGLIO ECCEZIONALE SPRUZZATURA A VENTAGLIO DISPONIBILE CON LE PISTOLE SPARTACUS DI MEDIE E GRANDI DISPONIBILE CON LE PISTOLE SPARTACUS DI MEDIE E GRANDI
DIMENSIONIDIMENSIONI
NUOVA PISTOLA CENTURIONLA PISTOLA PIÙ EFFICACE DEL SUO TEMPO
®CON TECNOLOGIA IBIX SRL
ECCEZIONALE SPRUZZATURA A VENTAGLIO DISPONIBILE CON LE PISTOLE SPARTACUS DI MEDIE E GRANDI
DIMENSIONI
SPRUZZURA A VENTAGLIO PIU' AMPIA (oltre 10 cm con la Pistola CENTURION Grande) che offre:
Ÿ Spruzzatura più veloce e strati più uniformi (un maggiore flusso di polvere si diffonde su un'area molto più grande)
Ÿ Sovrapposizione più facile delle passate e migliore fuoriuscita della polvere
Ÿ Nessuna striscia o accumulo di polvereŸ Minimizza il rischio di polvere non fusa con aria intrappolata
nel rivestimentoSpartacus nel rivestimento a fiamma Spartacus nel rivestimento a fiamma
di Giunti in 3LPE e 3LPPdi Giunti in 3LPE e 3LPPSpartacus nel rivestimento a fiamma
di Giunti in 3LPE e 3LPP
AUTOMAZIONEAUTOMAZIONEAUTOMAZIONE
BENEFICI OFFERTI DALLE NOSTRE PISTOLE APPOSITAMENTE PROGETTATE:
Ÿ Fiamma corta e forte, per far passare la polvere attraverso la fiamma il più rapidamente possibile
Ÿ La polvere viene spinta velocemente attraverso la fiammaŸ Il flusso d'aria trasportatore della polvere, la protegge dalla degradazione
consentendo così un OIT più alto*
*i valori di OIT dipendono altresì dalla qualità della polvere utilizzata. PLASCOAT PP10, insieme al nostro Spartacus Oil & Gas, può offrire un OIT > 40 minuti.
RIVESTIMENTI APPLICATI IN PRODUZIONE TRAMITE SPRUZZATURA A FIAMMA CON SPARTACUS
Ÿ Maggiore velocitàŸ Ideale per sistemi 3LPP o 3LPEŸ Permette l'applicazione di un rivestimento a spessori da 2 a 12* mm (o
più) in una sola operazione;Ÿ Processo di rivestimento più veloce rispetto alla spruzzatura
elettrostatica multipla o al metodo della sinterizzazione;Ÿ Risparmio energetico (non necessita di ripetuti passaggi in forno per la
rifusione della polvere applicata)
*dipende dalla qualità di polvere utilizzata (lo spessore può variare)
Spruzzatura a Ventaglio Ÿ Solo con le pistole CENTURION
Buckle Arrestor rivestiti con PP Buckle Arrestor rivestiti con PP tramite spruzzatura a fiamma automatizzatatramite spruzzatura a fiamma automatizzata
Buckle Arrestor rivestiti con PP tramite spruzzatura a fiamma automatizzata
Getto della polvere a forma ellitticaGetto della polvere a forma ellitticaGetto della polvere a forma ellittica
Sistema automatico per il rivestimento di curveSistema automatico per il rivestimento di curveSistema automatico per il rivestimento di curve
L'automazione nella spruzzatura a fiamma L'automazione nella spruzzatura a fiamma per l'Industria Oil & Gasper l'Industria Oil & GasL'automazione nella spruzzatura a fiamma per l'Industria Oil & Gas
Sempre liscio, anche nei rivestimenti Sempre liscio, anche nei rivestimenti su condutture di tutte le tagliesu condutture di tutte le taglie
e raccordi con strato PP spesso e perfettamente fusoe raccordi con strato PP spesso e perfettamente fuso
Sempre liscio, anche nei rivestimenti su condutture di tutte le taglie
e raccordi con strato PP spesso e perfettamente fuso
Ÿ Elimina il fattore “umano”Ÿ Consistenza e ripetibilitàŸ SicurezzaŸ Omogeneità del rivestimentoŸ Velocità
Alcune delle funzioni e controlli elettronici permessi dal nostro PLC:
NEW!!! NEW!!! PAT. PEND.PAT. PEND.NEW!!! PAT. PEND.
E' possibile automatizzare il processo di Rivestimento a Fiamma, ad esempio per buckle arrestors, sezioni di condutture e curve
Ÿ Accensione e spegnimento automatico della fiamma
Ÿ Accensione e spegnimento automatico della polvere
Ÿ Impostazione automatica delle fiamme per la modalità operativa (dopo l'accensione)
Ÿ Dispositivi di sicurezza: fotocellule rilevatrici p r e s e n z a f i a m m a p e r r i l e v a z i o n e dell'eventuale spegnimento delle stesse con l'arresto automatico del flusso gas
Ÿ Sistema di allarme per livello di polvere basso
IBIX SRLIBIX SRL
Via La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALYVia La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALYTel. +39 0545 994589 - Fax +39 0545 994567Tel. +39 0545 994589 - Fax +39 0545 [email protected] - [email protected] - www.tecnosupply.com
IBIX SRL
Via La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALYTel. +39 0545 994589 - Fax +39 0545 [email protected] - www.tecnosupply.com
© Copyright IBIX Srl 2013© Copyright IBIX Srl 2013® Registered Trademarks of IBIX S.r.l. ® Registered Trademarks of IBIX S.r.l.
© Copyright IBIX Srl 2013® Registered Trademarks of IBIX S.r.l.
IL SISTEMA DI RIVESTIMENTO A FIAMMA IL SISTEMA DI RIVESTIMENTO A FIAMMA PERFETTO PER GLI OPERATORI DEL SETTORE OIL & GAS PERFETTO PER GLI OPERATORI DEL SETTORE OIL & GAS
E DELLE VERNICIATURE CONTO TERZIE DELLE VERNICIATURE CONTO TERZIPRESTAZIONI ELEVATE E VERSATILITÀ IN UN SISTEMA COMPATTOPRESTAZIONI ELEVATE E VERSATILITÀ IN UN SISTEMA COMPATTO
IL SISTEMA DI RIVESTIMENTO A FIAMMA PERFETTO PER GLI OPERATORI DEL SETTORE OIL & GAS
E DELLE VERNICIATURE CONTO TERZIPRESTAZIONI ELEVATE E VERSATILITÀ IN UN SISTEMA COMPATTO
OIL&GAS
DATI TECNICIDATI TECNICI
PISTOLE - VERSIONI SPECIALIPISTOLE - VERSIONI SPECIALI
DATI TECNICI
Dimensioni d'ingombro:
LARGHEZZA: 700 mm (27.56 inch.)LUNGHEZZA: 650 mm (25.59 inch)ALTEZZA: 1050 mm (41.34 inch.)
Ÿ Necessita solo di aria compressa essiccata e GPL Ÿ Requisiti d'aria minimi: 1000 l al minuto; aria secca e
refrigerata; pressione costante di 6 bar;Ÿ GPL - contenuto minimo di propano: 50% - 60%;Ÿ Pressione minima del GPL: costante a 3 bar.
Ÿ Portatile e semplice da usareŸ Sistema di alimentazione della polvere ad altissimo flussoŸ Ruote larghe per un trasporto più semplice su terreni
accidentatiŸ Connessioni tramite raccordi rapidi con tubi identificabili in
base al colore collegati alla macchinaŸ Controllo diretto del volume della polvere sulla macchinaŸ Adatto per l'applicazione di un rivestimento PP10 dallo
spessore di 12mm o più in una singola operazione di rivestimento
PISTOLE DI VARIE DIMENSIONI per tutte le operazioni
Ÿ Pistola Grande - adatta per giunti, buckle arrestors e curve in condutture di ampie dimensioni.
Ÿ Pistola Media - adatta per giunti di tubi dal diametro minore; Ÿ Pistola Piccola - ideale per giunti di tubi più piccoli e per
riparazioni e ritocchi; PISTOLE - VERSIONI SPECIALI
Nuove Pistole con “fessure” poste sull'estremità per ottimizzare la ventilazione della pistola e mantenere una temperatura dell'apparecchio più bassa
Nuova Pistola CENTURION per una spruzzatura a ventaglio più ampia.
a division of
a division of
Pistola Grande con ManigliaPistola Grande con ManigliaPistola Grande con Maniglia
Comandi sulla MacchinaComandi sulla MacchinaComandi sulla Macchina
More and more committed to the Oil&Gas IndustryMore and more committed to the Oil&Gas IndustryMore and more committed to the Oil&Gas Industry
La Pistola Spartacus Piccola viene utilizzata con successo per effettuare riparazioni di rivestimenti esistenti grazie alla fiamma controllata e al getto di polvere preciso.
Nuovo Sistema EXTRA-COOLINGNuovo Sistema EXTRA-COOLINGNuovo Sistema EXTRA-COOLING
Piccola
Media
Grande
NUOVO SISTEMA EXTRA-COOLING con scambiatore di calore per una spruzzatura a fiamma prolungata, utile soprattutto in impianti di rivestimento automatici.
Pistola Piccola Pistola Piccola per Riparazioni e Ritocchiper Riparazioni e RitocchiPistola Piccola per Riparazioni e Ritocchi
IBIX SRLIBIX SRL
Via La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALYVia La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALY
Tel. +39 0545 994589 - Fax +39 0545 994567Tel. +39 0545 994589 - Fax +39 0545 994567
[email protected] - [email protected] - www.tecnosupply.com
IBIX SRL
Via La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALY
Tel. +39 0545 994589 - Fax +39 0545 994567
[email protected] - www.tecnosupply.com© Copyright IBIX Srl 2013© Copyright IBIX Srl 2013
® Registered Trademarks of IBIX S.r.l. ® Registered Trademarks of IBIX S.r.l. © Copyright IBIX Srl 2013
® Registered Trademarks of IBIX S.r.l.
THE PERFECT FLAME SPRAY COATING SYSTEMTHE PERFECT FLAME SPRAY COATING SYSTEMFOR PIPE CNTRACTORSFOR PIPE CNTRACTORS
HIGH PERFORMANCE AND VERSATILITYHIGH PERFORMANCE AND VERSATILITYIN A COMPACT SYSTEMIN A COMPACT SYSTEM
THE PERFECT FLAME SPRAY COATING SYSTEMFOR PIPE CNTRACTORS
HIGH PERFORMANCE AND VERSATILITYIN A COMPACT SYSTEM
OIL&GAS
TECHNICAL DATATECHNICAL DATA
SPECIAL GUN VERSIONSSPECIAL GUN VERSIONS
TECHNICAL DATA
Overall Dimensions:
WIDTH: 700 mm (27.56 inch.)LENGTH: 650 mm (25.59 inch.)HEIGHT: 1050 mm (41.34 inch.)
Ÿ Only requires dry compressed air and LPG:Ÿ Minimum air requirement: 1000 l per minute; dried, cool
air; 6 bar constant;Ÿ LPG - minimum propane content: 50%-60%;Ÿ Minimum pressure: 3 bars constant;
Ÿ Portable and easy to use;Ÿ Very high powder flow feeding system;Ÿ Large wheels for easier transport on rough terrain;Ÿ Quick connect, colour coded hoses to machine;Ÿ Controls fixed on the machine casing;Ÿ Suitable to apply a fully melted PP10 coating layer to 12 mm
and more in one operation.
VARIOUS GUN SIZES for all operations
Ÿ Large gun - suitable for larger diameter pipe joints, bends, buckle arrestors
Ÿ Medium gun - suitable for smaller diameter pipe jointsŸ Small gun - suitable for small diameter pipe joints and for
repairs and touch upsŸ 45° gun to coat difficult to reach areas SPECIAL GUN VERSIONS
New Guns with "vents" on the gun tip optimizing air ventilation in the gun and keeping the gun cooler.
New centurion gun for wider spray pattern.
a division of
a division of
Large gun with handleLarge gun with handleLarge gun with handle
Controls on the machineControls on the machineControls on the machine
More and more committed to the Oil&Gas IndustryMore and more committed to the Oil&Gas IndustryMore and more committed to the Oil&Gas Industry
The Spartacus Small Gun is succesfully used to do repairs of existing coatings thanks to the controlled flame and accurate powder flow.
New Gun Cooling SystemNew Gun Cooling SystemNew Gun Cooling System
Small
Medium
Large
NEW EXTRA-COOLING SYSTEM with heat exchanger for prolonged flame spraying specially useful in automatic coating equipment.
Small Gun Repairs and Touch-UpsSmall Gun Repairs and Touch-UpsSmall Gun Repairs and Touch-Ups
Field-applied Flame Sprayed PP coatings (e.g Plascoat PP10) are virtually the
same as the factory-applied protective layers on the pipe.
This ensures that when these coatings are applied they will form a perfect
homogenous bond with the parent coatings, i.e. the factory-applied PP layers.
The result is a fully melted coating fused with the existing polyolefin on the pipe
body forming a homogeneous coating that will provide unsurpassed, cost-
effective protection of your field joints, bends and fittings.
The first technological advance The first technological advance in the pipe joint & coating industry in yearsin the pipe joint & coating industry in yearsPPPP
The first technological advance in the pipe joint & coating industry in yearsPP
NEW “CENTURION” GUNNEW “CENTURION” GUN®
THE MOST POWERFUL GUN OF ITS TIME POWERED BY IBIX SRL ®THE MOST POWERFUL GUN OF ITS TIME POWERED BY IBIX SRL
EXCEPTIONALLY WIDE SPRAY PATTERN EXCEPTIONALLY WIDE SPRAY PATTERN AVAILABLE ON THE LARGE SPARTACUS GUNS AND MEDIUM GUNSAVAILABLE ON THE LARGE SPARTACUS GUNS AND MEDIUM GUNS
NEW “CENTURION” GUN®
THE MOST POWERFUL GUN OF ITS TIME POWERED BY IBIX SRL
EXCEPTIONALLY WIDE SPRAY PATTERN AVAILABLE ON THE LARGE SPARTACUS GUNS AND MEDIUM GUNS
WIDER SPRAY PATTERN (over 10 cm. with the Large CENTURION gun) offering:
Ÿ faster spraying and more uniform layers (bigger powder flow spread over a much larger area)
Ÿ easier overlapping of passes and better powder flowing outŸ no powder "lines" or "stripes"Ÿ minimizes the risk of un-molten powder with air trapped in
the coating
Spartacus for 3LPE and 3LPP flame spraying of field jointsSpartacus for 3LPE and 3LPP flame spraying of field jointsSpartacus for 3LPE and 3LPP flame spraying of field joints
AUTOMATIONAUTOMATIONAUTOMATION
BENEFITS OFFERED BY OUR SPARTACUS SPECIALLY DESIGNED GUNS:
Ÿ short, strong flame, hence shorter time for the powder through the flame
Ÿ powder is propelled quickly through the flameŸ powder carrier air flow protecting the powder from degradation which
results into higher OIT (Oxidation Induction Time)*
*OIT results depend on the powder grade used. PLASCOAT PP10 with our Spartacus can offer > 40 mins OIT
FACTORY APPLIED SPARTACUS FLAME SPRAYED COATINGS
Ÿ fasterŸ ideal for 3LPP or 3LPEŸ allows the coater to apply a 2 to 12 * mm thick coating (or even thicker)
in one coating operation Ÿ quicker coating process than multiple electrostatic spray or sintering
passesŸ energy saving (no need for repeated heating in the oven)
* depending on the powder grade used (thickness to slump may vary)
FBE-FS-TWIN SYSTEMFBE-FS-TWIN SYSTEMFBE-FS-TWIN SYSTEM
Wide Spray PatternŸ By Centurion Guns
Automatically PP Flame Sprayed Buckle ArrestorAutomatically PP Flame Sprayed Buckle ArrestorAutomatically PP Flame Sprayed Buckle Arrestor
High volume in elliptical patternHigh volume in elliptical patternHigh volume in elliptical pattern
Automatic Bend Flame Spray System
Automation in Flame Spraying Automation in Flame Spraying for the Oil&Gas Industryfor the Oil&Gas IndustryAutomation in Flame Spraying for the Oil&Gas Industry
Perfectly smooth even coverage on any size pipes and fittings Perfectly smooth even coverage on any size pipes and fittings perfectly molten thick PP layerperfectly molten thick PP layer
Perfectly smooth even coverage on any size pipes and fittings perfectly molten thick PP layer
Ÿ Eliminates the «human» factor
Ÿ Consistency and repeatibility
Ÿ Safety
Ÿ Homogeneous coating
Ÿ Speed
Some of the functions allowed by our PLC and electric controls:
Ÿ Automatic Flame ON-OFFŸ Automatic Powder ON-OFFŸ Automatic f lame setting to the
operational modeŸ Flame Out safeties featuring flame
present photocellsŸ Low powder alarm system
NEW!!! NEW!!! PAT. PEND.PAT. PEND.NEW!!! PAT. PEND.
The Flame Spray Coating Process can be automated for example for buckle arrestors, pipe sections, bends
Field-applied Flame Sprayed PP coatings (e.g Plascoat PP10) are virtually the
same as the factory-applied protective layers on the pipe.
This ensures that when these coatings are applied they will form a perfect
homogenous bond with the parent coatings, i.e. the factory-applied PP layers.
The result is a fully melted coating fused with the existing polyolefin on the pipe
body forming a homogeneous coating that will provide unsurpassed, cost-
effective protection of your field joints, bends and fittings.
The first technological advance The first technological advance in the pipe joint & coating industry in yearsin the pipe joint & coating industry in yearsPPPP
The first technological advance in the pipe joint & coating industry in yearsPP
NEW “CENTURION” GUNNEW “CENTURION” GUN®
THE MOST POWERFUL GUN OF ITS TIME POWERED BY IBIX SRL ®THE MOST POWERFUL GUN OF ITS TIME POWERED BY IBIX SRL
EXCEPTIONALLY WIDE SPRAY PATTERN EXCEPTIONALLY WIDE SPRAY PATTERN AVAILABLE ON THE LARGE SPARTACUS GUNS AND MEDIUM GUNSAVAILABLE ON THE LARGE SPARTACUS GUNS AND MEDIUM GUNS
NEW “CENTURION” GUN®
THE MOST POWERFUL GUN OF ITS TIME POWERED BY IBIX SRL
EXCEPTIONALLY WIDE SPRAY PATTERN AVAILABLE ON THE LARGE SPARTACUS GUNS AND MEDIUM GUNS
WIDER SPRAY PATTERN (over 10 cm. with the Large CENTURION gun) offering:
Ÿ faster spraying and more uniform layers (bigger powder flow spread over a much larger area)
Ÿ easier overlapping of passes and better powder flowing outŸ no powder "lines" or "stripes"Ÿ minimizes the risk of un-molten powder with air trapped in
the coating
Spartacus for 3LPE and 3LPP flame spraying of field jointsSpartacus for 3LPE and 3LPP flame spraying of field jointsSpartacus for 3LPE and 3LPP flame spraying of field joints
AUTOMATIONAUTOMATIONAUTOMATION
BENEFITS OFFERED BY OUR SPARTACUS SPECIALLY DESIGNED GUNS:
Ÿ short, strong flame, hence shorter time for the powder through the flame
Ÿ powder is propelled quickly through the flameŸ powder carrier air flow protecting the powder from degradation which
results into higher OIT (Oxidation Induction Time)*
*OIT results depend on the powder grade used. PLASCOAT PP10 with our Spartacus can offer > 40 mins OIT
FACTORY APPLIED SPARTACUS FLAME SPRAYED COATINGS
Ÿ fasterŸ ideal for 3LPP or 3LPEŸ allows the coater to apply a 2 to 12 * mm thick coating (or even thicker)
in one coating operation Ÿ quicker coating process than multiple electrostatic spray or sintering
passesŸ energy saving (no need for repeated heating in the oven)
* depending on the powder grade used (thickness to slump may vary)
FBE-FS-TWIN SYSTEMFBE-FS-TWIN SYSTEMFBE-FS-TWIN SYSTEM
Wide Spray PatternŸ By Centurion Guns
Automatically PP Flame Sprayed Buckle ArrestorAutomatically PP Flame Sprayed Buckle ArrestorAutomatically PP Flame Sprayed Buckle Arrestor
High volume in elliptical patternHigh volume in elliptical patternHigh volume in elliptical pattern
Automatic Bend Flame Spray System
Automation in Flame Spraying Automation in Flame Spraying for the Oil&Gas Industryfor the Oil&Gas IndustryAutomation in Flame Spraying for the Oil&Gas Industry
Perfectly smooth even coverage on any size pipes and fittings Perfectly smooth even coverage on any size pipes and fittings perfectly molten thick PP layerperfectly molten thick PP layer
Perfectly smooth even coverage on any size pipes and fittings perfectly molten thick PP layer
Ÿ Eliminates the «human» factor
Ÿ Consistency and repeatibility
Ÿ Safety
Ÿ Homogeneous coating
Ÿ Speed
Some of the functions allowed by our PLC and electric controls:
Ÿ Automatic Flame ON-OFFŸ Automatic Powder ON-OFFŸ Automatic f lame setting to the
operational modeŸ Flame Out safeties featuring flame
present photocellsŸ Low powder alarm system
NEW!!! NEW!!! PAT. PEND.PAT. PEND.NEW!!! PAT. PEND.
The Flame Spray Coating Process can be automated for example for buckle arrestors, pipe sections, bends
IBIX SRLIBIX SRL
Via La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALYVia La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALY
Tel. +39 0545 994589 - Fax +39 0545 994567Tel. +39 0545 994589 - Fax +39 0545 994567
[email protected] - [email protected] - www.tecnosupply.com
IBIX SRL
Via La Viola, 2 - 48022 S. Maria in Fabriago (RAVENNA) - ITALY
Tel. +39 0545 994589 - Fax +39 0545 994567
[email protected] - www.tecnosupply.com© Copyright IBIX Srl 2013© Copyright IBIX Srl 2013
® Registered Trademarks of IBIX S.r.l. ® Registered Trademarks of IBIX S.r.l. © Copyright IBIX Srl 2013
® Registered Trademarks of IBIX S.r.l.
THE PERFECT FLAME SPRAY COATING SYSTEMTHE PERFECT FLAME SPRAY COATING SYSTEMFOR PIPE CNTRACTORSFOR PIPE CNTRACTORS
HIGH PERFORMANCE AND VERSATILITYHIGH PERFORMANCE AND VERSATILITYIN A COMPACT SYSTEMIN A COMPACT SYSTEM
THE PERFECT FLAME SPRAY COATING SYSTEMFOR PIPE CNTRACTORS
HIGH PERFORMANCE AND VERSATILITYIN A COMPACT SYSTEM
OIL&GAS
TECHNICAL DATATECHNICAL DATA
SPECIAL GUN VERSIONSSPECIAL GUN VERSIONS
TECHNICAL DATA
Overall Dimensions:
WIDTH: 700 mm (27.56 inch.)LENGTH: 650 mm (25.59 inch.)HEIGHT: 1050 mm (41.34 inch.)
Ÿ Only requires dry compressed air and LPG:Ÿ Minimum air requirement: 1000 l per minute; dried, cool
air; 6 bar constant;Ÿ LPG - minimum propane content: 50%-60%;Ÿ Minimum pressure: 3 bars constant;
Ÿ Portable and easy to use;Ÿ Very high powder flow feeding system;Ÿ Large wheels for easier transport on rough terrain;Ÿ Quick connect, colour coded hoses to machine;Ÿ Controls fixed on the machine casing;Ÿ Suitable to apply a fully melted PP10 coating layer to 12 mm
and more in one operation.
VARIOUS GUN SIZES for all operations
Ÿ Large gun - suitable for larger diameter pipe joints, bends, buckle arrestors
Ÿ Medium gun - suitable for smaller diameter pipe jointsŸ Small gun - suitable for small diameter pipe joints and for
repairs and touch upsŸ 45° gun to coat difficult to reach areas SPECIAL GUN VERSIONS
New Guns with "vents" on the gun tip optimizing air ventilation in the gun and keeping the gun cooler.
New centurion gun for wider spray pattern.
a division of
a division of
Large gun with handleLarge gun with handleLarge gun with handle
Controls on the machineControls on the machineControls on the machine
More and more committed to the Oil&Gas IndustryMore and more committed to the Oil&Gas IndustryMore and more committed to the Oil&Gas Industry
The Spartacus Small Gun is succesfully used to do repairs of existing coatings thanks to the controlled flame and accurate powder flow.
New Gun Cooling SystemNew Gun Cooling SystemNew Gun Cooling System
Small
Medium
Large
NEW EXTRA-COOLING SYSTEM with heat exchanger for prolonged flame spraying specially useful in automatic coating equipment.
Small Gun Repairs and Touch-UpsSmall Gun Repairs and Touch-UpsSmall Gun Repairs and Touch-Ups