Space Saver Shed Absco Space Saver Shed Assembly ... manual/23081… · ABSCO INDUSTRIES ASSEMBLY...

ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTXABSCO INDUSTRIES PAGE 1 16/07/19

Space Saver ShedAssembly InstructionsModel: 23081SK-PTX

CONCRETE SLAB

PAGE 1ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA

Absco Space Saver ShedAssembly InstructionsModel: 23081S

We thank you for choosing an Australian Made Shed. For further assistance pleasevisit our detailed instructional video library at http://www.absco.com.au/videos.php

At ABSCO Industries we are always looking to be number ONE, so please let usknow what you think of our instructions. Feedback makes us [email protected].

10mm (0.39")50mm (1.97")

THIS WILL ENSURE THAT

CLEAR FROM YOUR SHEDWATER RUN OFF IS KEPT

2360mm

(92.91")880mm(34.65")

FRONT BASELENGTH:2.26m (88.98")

SIDE BASELENGTH:0.75m (29.53")

FRONT WALLHEIGHT:1.95m (76.77")

REAR WALLHEIGHT:2.08m (81.89")

WHEN LAYING YOUR CONCRETE SLAB,CHAMFER THE 50mm (1.97") EDGESDOWNWARDS BY 10mm (0.39").

50mm(1.97")

INSTRUCTIONSAND VIDEOS

Space Saver ShedModel: 23081SK-PTX

ABSCO INDUSTRIES PAGE 2 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX

Premier Garden Shed - Model: J30232G

PAGE 2ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14

GENERAL INSTRUCTIONS

A NOTE ON SAFETY

The site for the shed must be level.

It is recommended that the shed be set on a 4" concrete slab andanchored down appropriately (refer last page for details).

Anchor sets are not supplied as standard items with this product.

Before commencing any assembly, read through these instructions indetail to gain a thorough understanding of assembly methods andassociated details.

Unpack the carton and carefully identify and check off all the partsagainst the parts described and illustrated on pages three and four.

Some parts may have sharp edges. It is advisable to wear gloves whenhandling these items and safety glasses if drilling holes. Sensible shoesare highly recommended.

Do not erect your shed in windy conditions, ensure that the shed issecurely anchored to a solid foundation immediately after construction iscompleted.

It is highly recommended to erect the shed with two or more people.

TOOLS REQUIRED

SITE PREPARATION

Normal 1/8", 11/64"

Masonry 25/64"Normal 25/64"

OPTIONAL




COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS


Absco Space Saver ShedModel: 23081S

2

COMPONENTDESCRIPTION

PARTNo. CHECK COMPONENT

DESCRIPTIONPART

No. CHECKQTY QTY

43B

1

1

1

3

2

1

1

43C

X4L

X4R

43D

STEEL SHEET1725mm (67.91")(67.91") X 773mm

(30.43") B

1

1

1

2

2

2

1

61BCHANNELL = 786mm (30.95")

CHANNELL = 773mm (30.43")

81J

32A

54ACHANNELL = 2253mm (88.70")

54CCHANNELL = 2253mm (88.70")

54BCHANNELL = 2253mm (88.70")

81DCHANNELL = 2253mm (88.70")

81CCHANNELL = 2253mm (88.70")

79BCHANNELL = 788mm (31.03")

STEEL SHEET1915mm (75.39")X 773mm (30.43")



STEEL SHEET1915mm (75.39")

X 773mm (30.43")

STEEL SHEET865mm (34.05") X773mm (30.43")







COMPONENTDESCRIPTION

PARTNo. CHECK COMPONENT

DESCRIPTIONPART

No. CHECKQTY QTY

CONTENTS OF FITTINGS PACKET

COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS

1

1

2

89A1

1

2

2

91AJAMB L= 1120mm (44.09")

88B

58ACHANNEL WITH HINGESL = 1725mm (67.91")

58BCHANNELL = 1725mm (67.91")

58CCHANNELL = 773mm (30.43")

89B1

90BJAMB L= 788mm (31.03")

64mm (0.16") CSK

SCREW & NUT SECUREHINGES TO DOOR

(ALTERNATE METHOD)

220 SELF TAPPINGSCREWS 1

1

DOORPADBOLT

1DOOR

PADBOLTHASP 6 3mm (0.12") POP RIVETS

SECURE HINGES TO DOOR

1 ASSEMBLYINSTRUCTIONS 12A1

DOORSTRAP

L: 165mm(6.50")

22A

JAMB L= 1785mm (70.27")

JAMB L= 1785mm (70.27")

LIP TRIM L= 865mm(34.05")

RIVET GUN




VIE

W O

F R

OO

F C

OM

PO

NE

NT

S

PA

GE

5A

BSC

O IN

DU

STR

IES

ASS

EMB

LY IN

STR

UC

TIO

N -

MO

DEL

: 230

81S

14/1

2/10

USA

CA

NA

DA

Abs

co S

pace

Sav

er S

hed

Mod

el: 2

3081

S




VIE

W O

F W

ALL

CO

MP

ON

EN

TS

AB

SCO

IND

UST

RIE

S

A

SSEM

BLY

INST

RU

CTI

ON

- M

OD

EL: 2

3081

S 14

/12/

10 U

SA C

AN

AD

A

Abs

co S

pace

Sav

er S

hed

Mod

el: 2

3081

S

PA

GE

6






ABSCO ASSEMBLY INTRODUCTION

FASTENING SYMBOLS

The snap-tite assembly system locks most perimeter channels to all roof and wallsheets without the need for tools and fasteners.

To pre-assemble the four wall panelsand two roof panels, the perimeterchannels are secured to the top andbottom of each panel using thesnaptite system, as detailed on thefollowing pages wherever you seethe symbol.

Position sheets on timbers,trestles or partly over edge ofconcrete slab.

Each perimeter channel must finish flushwith the edges of the sheets. the snap-titesystem allows adjustment for thisprocess by simply tapping the channelalong the sheets until each end is neatlyflush.

Join components together with one screw at thislocation only, as some channel sections have extraholes that are not required for this model of gardenshed

Do not join components together at this location yet,as the screw may obstruct further assembly of othercomponents

4mm (0.16") NUT & BOLT SET

3mm (0.12") POP RIVETS

PUSH

PUSH

HIG

H S

IDE

HIG

H S

IDE

PUSH HIG

H S

IDE

HIG

H S

IDE

After joining sheets together,position channel over one end of thesheets, gently tapping it over thesnaptite lugs, working along thesheets to the other end.

HIGH SIDE

SNAPT TEi






DOOR PANEL ASSEMBLYDOOR PANEL ASSEMBLY

58C

58C

58A

B

B

58B

12A

20mm (0.79")FLANGE

15mm (0.59")FLANGE




REAR PANEL ASSEMBLY



43B

43C

43B

54B

81D






SIDE PANEL ASSEMBLY

(TWO REQUIRED)

X4L

X4R

61B

81J




ROOF PANEL ASSEMBLY



43D

43D

43D

81C

88B

81C

88B



ABSCO INDUSTRIES PAGE 12 16/07/19ASSEMBLY INSTRUCTION - MODEL: 23081SK-PTX PAGE 12ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 23081S 14/12/10 USA CANADA


FRONT PANEL ASSEMBLY

89B

89A

32A

32A

54A

79B

54C

90B






NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allowfor proper alignment. position each hasp centrally over the padbolt shaft, and drill 3mm (0.12") holes andsecure with screws

NOTE: NUTS AND BOLTS (SUPPLIED) MAY BE USEDINSTEAD OF POP RIVETS (SUPPLIED) BY SIMPLYENLARGING THE HINGE HOLE SETS IN THE JAMBUSING A 4mm (0.16") DRILL BIT

91A

91A

B

B






PANEL CONSTRUCTION

NOTE: Take care to ensure that both frontand rear wall panels are not positionedupside down. The top channel of eachpanel is pre-punched for attaching roofsheet. The base channels are notpre-punched.

SIDE WALL PANEL CHANNELS FITINTO THE NOTCHED FRONT ANDREAR WALL PANEL CHANNELS




FINAL CONSTRUCTION



DYNABOLT

BOLT & NUT

STEELANGLE

SLAB

WALLSHEET

- EACH ANCHOR CONSISTS OF ONE NUT, BOLT, DYNABOLT AND STEEL ANGLE

- DRILL A 10mm (0.39") HOLE INTO THE WALL SHEET

- DRILL A 10mm (0.39") HOLE INTO THE CONCRETE

ANCHORING OF SHED

LOCATION OF 8CONCRETE ANCHORS




1 | P a g e

EXPORT PRODUCT WARRANTY

AGAINST DEFECTS

Congratulations on your purchase of an ABSCO SHED

ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel.

We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 12 years from date of purchase.

This warranty does not apply to surface deterioration of panels caused by ‘Swarf” (Tiny particles of steel debris left from cutting, grinding or drilling operations) that has not been removed after building construction, or as a result of contact with damp soil, chemicals, fertilisers or other corrosive substances.

This warranty covers any Absco product used for normal domestic use and installed in accordance with the installation instructions.

This warranty does NOT cover Damage caused by storms, wind, rain, snow or poor foundations. This warranty does NOT cover ABSCO products installed in severe coastal, industrial or other highly corrosive environments. The warranty does not cover fasteners (screws, nuts, bolts, rivets, hasps or sliding padbolts).

The warranty is limited to replacement and delivery of components and does not include any labour or installation costs. The benefits given by the warranty are in addition to your other rights and remedies under a law in relation to the goods or services to which the warranty relates.

In the unlikely event a warranty claim is made, it must be supported by photographic evidence and details of the defect, including component part numbers, together with proof of purchase documentation (or on-line registration of purchase) and forwarded to the address below. Upon receipt of the warranty claim, the Customer Service Manager will contact you within three business days to advise you of the assessment outcome of the claim, which may include your expenses incurred in making the claim.

THE CUSTOMER SERVICE MANAGER, ABSCO SHEDS, PO BOX 119 ACACIA RIDGE QLD AUSTRALIA 4110

PHONE: +61 1800 029701 EMAIL: [email protected]

Issued 16 July 2019

Space Saver Shed Absco Space Saver Shed Assembly ... manual/23081… · ABSCO INDUSTRIES ASSEMBLY...

Documents

Transcript of Space Saver Shed Absco Space Saver Shed Assembly ... manual/23081… · ABSCO INDUSTRIES ASSEMBLY...