South America Asia Pacific Paraffin Control Library/a... · Oilfield chemicals Global headquarters...
Transcript of South America Asia Pacific Paraffin Control Library/a... · Oilfield chemicals Global headquarters...
Oilfield chemicals
Global headquartersHuntsman Corporation 10003 Woodloch Forest DriveThe Woodlands, Texas, 77380USATel : +1-281-719-6000Fax : +1-281-719-6055
South AmericaHuntsman Quimica Brasil Ltda.Av. Prof. Vicente Rao, 90Predio 122 - 2º andar04636-000São Paulo/SP BrazilTel : +55-11-2393-2482
Asia PacificHuntsman Performance Products 150 Beach Road#37-00 Gateway WestSingapore 189720Tel : +65-6297-3363Fax : +65-6296-3368
Australia61 Market Road Brooklyn Victoria 3012, Australia Tel : +61-3-9933-6696Fax : +61-3-9933-6656
Europe, Africa and Middle EastHuntsman Performance Products Everslaan 45 B-3078 EverbergBelgiumTel : 32-2-758-9211Fax : 32-2-758-9112Email : [email protected]
DisclaimerHuntsman Corporation warrants only that its products meetthe specifications stated in the sales contract. Typical proper-ties, where stated, are to be considered as representative ofcurrent production and should not be treated as specifications.While all the information presented in this document is believed to be reliable and to represent the best available dataon these products, HUNTSMAN MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, NON-INFRINGEMENT OF ANY INTELLECTUALPROPERTY RIGHT OF ANY THIRD PARTY, OR WARRANTIESAS TO QUALITY OR CORRESPONDENCE WITH PRIOR DESCRIPTION OR SAMPLE, AND ANY USER OF PRODUCTSDESCRIBED HEREIN SHOULD CONDUCT A SUFFICIENTINVESTIGATION TO ESTABLISH THE SUITABILITY OF ANYPRODUCT FOR ITS INTENDED USE AND ASSUMES ALLRISK AND LIABILITY WHATSOEVER RESULTING FROMTHE USE OF SUCH PRODUCT, WHETHER USED SINGLYOR IN COMBINATION WITH OTHER SUBSTANCES. Productsmay be toxic and require special precautions in handling. Forall products described herein, the user should obtain detailedinformation on toxicity, together with proper shipping, han-dling, and storage procedures, and should comply with allapplicable safety and environmental standards. The behavior,hazards and/or toxicity of the products referred to in this publication in manufacturing processes and their suitability inany given end-use environment are dependent upon variousconditions such as chemical compatibility, temperature, andother variables, which may not be known to Huntsman. It isthe sole responsibility of the user of such products to evalu-ate the manufacturing circumstances and the final productsunder actual end-use requirements and to adequately adviseand warn future purchasers and users thereof.
JEFF-FLOW®, NANSA®, TERIC® and SURFONIC® are registered trademarks of Huntsman Corporation or an affiliate thereof in one or more, but not all, countries.
Copyright © 2015 Huntsman Corporation or an affiliatethereof. All rights reserved.
Huntsman Performance Products - Energy SBU
Gas treating
Enhanced oil recoveryAlternate energy - Wind
Alternate energy - Lithium-ion batteries Alternate energy - Solar Paraffin Control
www.huntsman.com/performance_products
USA
Chocolate Bayou (Texas)
Conroe (Texas)
Dayton (Texas)
Freeport (Texas)
Geismar (Louisiana)
Pensacola (Florida)
Port Neches (Texas)
The Woodlands (Texas)
Europe
Barcelona (Spain)
Castiglione (Italy)
Everberg (Belgium)
Jubail (Saudi Arabia)
Llanelli (United Kingdom)
Petfurdo (Hungary)
Saint-Mihiel (France)
APAC
Ankleshwar (India)
Botany (Australia)
Brooklyn (Australia)
Jurong (Singapore)
Mumbai (India)
Shanghai (China)
Singapore (Singapore)
Performance Products Global Technology
Manufacturing Location Research and Development Site Regional Office
South America
São Paulo (Brazil)
25.375 x 11 Paraffin_Layout 1 4/1/15 2:16 PM Page 1
Oilfield chemicals
Global headquartersHuntsman Corporation 10003 Woodloch Forest DriveThe Woodlands, Texas, 77380USATel : +1-281-719-6000Fax : +1-281-719-6055
South AmericaHuntsman Quimica Brasil Ltda.Av. Prof. Vicente Rao, 90Predio 122 - 2º andar04636-000São Paulo/SP BrazilTel : +55-11-2393-2482
Asia PacificHuntsman Performance Products 150 Beach Road#37-00 Gateway WestSingapore 189720Tel : +65-6297-3363Fax : +65-6296-3368
Australia61 Market Road Brooklyn Victoria 3012, Australia Tel : +61-3-9933-6696Fax : +61-3-9933-6656
Europe, Africa and Middle EastHuntsman Performance Products Everslaan 45 B-3078 EverbergBelgiumTel : 32-2-758-9211Fax : 32-2-758-9112Email : [email protected]
DisclaimerHuntsman Corporation warrants only that its products meetthe specifications stated in the sales contract. Typical proper-ties, where stated, are to be considered as representative ofcurrent production and should not be treated as specifications.While all the information presented in this document is believed to be reliable and to represent the best available dataon these products, HUNTSMAN MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, NON-INFRINGEMENT OF ANY INTELLECTUALPROPERTY RIGHT OF ANY THIRD PARTY, OR WARRANTIESAS TO QUALITY OR CORRESPONDENCE WITH PRIOR DESCRIPTION OR SAMPLE, AND ANY USER OF PRODUCTSDESCRIBED HEREIN SHOULD CONDUCT A SUFFICIENTINVESTIGATION TO ESTABLISH THE SUITABILITY OF ANYPRODUCT FOR ITS INTENDED USE AND ASSUMES ALLRISK AND LIABILITY WHATSOEVER RESULTING FROMTHE USE OF SUCH PRODUCT, WHETHER USED SINGLYOR IN COMBINATION WITH OTHER SUBSTANCES. Productsmay be toxic and require special precautions in handling. Forall products described herein, the user should obtain detailedinformation on toxicity, together with proper shipping, han-dling, and storage procedures, and should comply with allapplicable safety and environmental standards. The behavior,hazards and/or toxicity of the products referred to in this publication in manufacturing processes and their suitability inany given end-use environment are dependent upon variousconditions such as chemical compatibility, temperature, andother variables, which may not be known to Huntsman. It isthe sole responsibility of the user of such products to evalu-ate the manufacturing circumstances and the final productsunder actual end-use requirements and to adequately adviseand warn future purchasers and users thereof.
JEFF-FLOW®, NANSA®, TERIC® and SURFONIC® are registered trademarks of Huntsman Corporation or an affiliate thereof in one or more, but not all, countries.
Copyright © 2015 Huntsman Corporation or an affiliatethereof. All rights reserved.
Huntsman Performance Products - Energy SBU
Gas treating
Enhanced oil recoveryAlternate energy - Wind
Alternate energy - Lithium-ion batteries Alternate energy - Solar Paraffin Control
www.huntsman.com/performance_products
USA
Chocolate Bayou (Texas)
Conroe (Texas)
Dayton (Texas)
Freeport (Texas)
Geismar (Louisiana)
Pensacola (Florida)
Port Neches (Texas)
The Woodlands (Texas)
Europe
Barcelona (Spain)
Castiglione (Italy)
Everberg (Belgium)
Jubail (Saudi Arabia)
Llanelli (United Kingdom)
Petfurdo (Hungary)
Saint-Mihiel (France)
APAC
Ankleshwar (India)
Botany (Australia)
Brooklyn (Australia)
Jurong (Singapore)
Mumbai (India)
Shanghai (China)
Singapore (Singapore)
Huntsman Performance Products Global Technology
Manufacturing Location Research and Development Site Regional Office
South America
São Paulo (Brazil)
25.375 x 11 Paraffin_Layout 1 4/1/15 3:09 PM Page 1
Paraffins found in crude oil production continue tocause problems within the oilfield industry. With the number of maturing fields and new finds increasing, production companies are quickly facing this widespread
industry challenge.
At Huntsman Performance Products (Huntsman), we provide a numberof products globally to assist the oilfield industry in its quest to controlparaffins in oil production. Huntsman offers numerous pour point depressants for waxy crudes. Our chemistries work by modifying thecrystalline structure of the paraffins, making it difficult for them to form a “plug,” thus improving the flow of valuable hydrocarbons. Ourbreadth of products enables formulators to find the best product to match the paraffins found in the crude oil they are producing.
Additionally, Huntsman offers a full line of linear alcohol ethoxylates,which can be used along with other solvents, to help disperse theparaffins found in crude production.
Paraffin Control Product Offering Overview
JEFF-FLOW® P 359: Onsite Pour Point Analysis
Crude Type South East Asian Crude
Blank Pour Point 30°C
SARA Analysis
Asphalthenes 0.70%
Resins 11%
Aromatics 16.3%
Saturates 72%
Wax Content 16%
JEFF-FLOW® P 964: Laboratory Pour Point Analysis
Crude Type South East Asian Crude
Blank Pour Point 38°C
WAT 58°C
Wax Content 18% - 22%
Huntsman Performance Products(Huntsman) offers an outstandingrange of surfactant technologies,world-scale manufacturing and aglobal distribution network.
JEFF-FLOW® P 359: Onsite Pour Point Analysis In this case study, JEFF-FLOW® P 359 was diluted with aromatic solvent.
JEFF-FLOW® P 964: Laboratory Pour Point Analysis In this case study, JEFF-FLOW® P 964 was diluted with aromatic solvent.
Effects of JEFF-FLOW® P 962 and JEFF-FLOW® P 964 on Viscosity of Paraffinic Crude Oil
JEFF-FLOW® products tested at 500ppm dose rate.
JEFF-FLOW®
Pour PointDepressants — helping to solve flow assuranceproblems
The problem:
JEFF-FLOW® P 359 COMPETITOR
JEFF-FLOW® P 964 JEFF-FLOW® P 962 BLANK
Rheology studies with the same samples revealed a significant improvement in the flowability of thecrude oil containing either JEFF-FLOW® P 962or JEFF-FLOW® P 964. These products offer not only a reduction in pour point of the crude,but also a reduction in its viscosity, even as thetemperature is decreased.
Oil & Gas Surface Wells/Flowlines Equipment Pipelines
POUR POINT DEPRESSANTS
Polymers
JEFF-FLOW® P 359 n n n
JEFF-FLOW® P 961 n n n
JEFF-FLOW® P 962 n n n
JEFF-FLOW® P 963 n n n
JEFF-FLOW® P 964 n n n
JEFF-FLOW® P 965 n n n
BUILDING BLOCKS/COMPONENTS
Alkylbenzene Sulfonic Acids
NANSA® SSA n n
NANSA® SMA 118 n n
NANSA® SMA 122 n n
NANSA® SMA 159 n n
Nonylphenol Ethoxylates
SURFONIC® N Series n n n
TERIC® N Series n n n
Linear Alcohol Ethoxylates
SURFONIC® L24-2 n n n
SURFONIC® L24-9 n n n
Ethanolamines
Monoethanolamine (MEA) n n n
FORMULATED MATERIALS
Alkylaryl Sulfonate Amine Salt in Aromatic Solvent
JEFF-FLOW® P 303 n n n
JEFF-FLOW® P 303A n n n
JEFF-FLOW® P 309 n n n
Blank P 962 P 964
35
30
25
20
15
10
5
0
TEMPERA
TURE
(˚C)
DOSE RATE (PPM)
0 700 1,000 2,000
30 30
18
29
15
28 27
40
35
30
25
20
15
10
5
0
TEMPERA
TURE
(˚C)
DOSE RATE (PPM)
0 1,000 2,000
18
23
38
450
400
350
300
250
200
150
100
50
0
VISC
OSITY (m
.Pa.s.)
TEMPERATURE (˚C)
20 30 30 30 30 70
JEFF-FLOW® P 962 and P 964: Rheological Studies
Pour points: +30˚C +21˚C +21˚C
25.375 x 11 Paraffin_Layout 1 4/1/15 3:09 PM Page 2
Paraffins found in crude oil production continue tocause problems within the oilfield industry. With the number of maturing fields and new finds increasing, production companies are quickly facing this widespread
industry challenge.
At Performance Products (Huntsman), we provide a number of productsglobally to assist the oilfield industry in its quest to control paraffins in oil production. Huntsman offers numerous pour point depressants forwaxy crudes. Our chemistries work by modifying the crystalline structureof the paraffins, making it difficult for them to form a “plug,” thus improving the flow of valuable hydrocarbons. Our breadth of productsenables formulators to find the best product to match the paraffinsfound in the crude oil they are producing.
Additionally, Huntsman offers a full line of linear alcohol ethoxylates,which can be used along with other solvents, to help disperse theparaffins found in crude production.
Paraffin Control Product Offering Overview
JEFF-FLOW® P 359: Onsite Pour Point Analysis
Crude Type South East Asian Crude
Blank Pour Point 30°C
SARA Analysis
Asphalthenes 0.70%
Resins 11%
Aromatics 16.3%
Saturates 72%
Wax Content 16%
JEFF-FLOW® P 964: Laboratory Pour Point Analysis
Crude Type South East Asian Crude
Blank Pour Point 38°C
WAT 58°C
Wax Content 18% - 22%
Performance Products (Huntsman)offers an outstanding range of surfactant technologies, world-scalemanufacturing and a global distribution network.
JEFF-FLOW® P 359: Onsite Pour Point Analysis In this case study, JEFF-FLOW® P 359 was diluted with aromatic solvent.
JEFF-FLOW® P 964: Laboratory Pour Point Analysis In this case study, JEFF-FLOW® P 964 was diluted with aromatic solvent.
Effects of JEFF-FLOW® P 962 and JEFF-FLOW® P 964 on Viscosity of Paraffinic Crude Oil
JEFF-FLOW® products tested at 500ppm dose rate.
JEFF-FLOW®
Pour PointDepressants — helping to solve flow assuranceproblems
The problem:
JEFF-FLOW® P 359 COMPETITOR
JEFF-FLOW® P 964 JEFF-FLOW® P 962 BLANK
Rheology studies with the same samples revealed a significant improvement in the flowability of thecrude oil containing either JEFF-FLOW® P 962or JEFF-FLOW® P 964. These products offer not only a reduction in pour point of the crude,but also a reduction in its viscosity, even as thetemperature is decreased.
Oil & Gas Surface Wells/Flowlines Equipment Pipelines
POUR POINT DEPRESSANTS
Polymers
JEFF-FLOW® P 359 n n n
JEFF-FLOW® P 961 n n n
JEFF-FLOW® P 962 n n n
JEFF-FLOW® P 963 n n n
JEFF-FLOW® P 964 n n n
JEFF-FLOW® P 965 n n n
BUILDING BLOCKS/COMPONENTS
Alkylbenzene Sulfonic Acids
NANSA® SSA n n
NANSA® SMA 118 n n
NANSA® SMA 122 n n
NANSA® SMA 159 n n
Nonylphenol Ethoxylates
SURFONIC® N Series n n n
TERIC® N Series n n n
Linear Alcohol Ethoxylates
SURFONIC® L24-2 n n n
SURFONIC® L24-9 n n n
Ethanolamines
Monoethanolamine (MEA) n n n
FORMULATED MATERIALS
Alkylaryl Sulfonate Amine Salt in Aromatic Solvent
JEFF-FLOW® P 303 n n n
JEFF-FLOW® P 303A n n n
JEFF-FLOW® P 309 n n n
Blank P 962 P 964
35
30
25
20
15
10
5
0
TEMPERA
TURE
(˚C)
DOSE RATE (PPM)
0 700 1,000 2,000
30 30
18
29
15
28 27
40
35
30
25
20
15
10
5
0
TEMPERA
TURE
(˚C)
DOSE RATE (PPM)
0 1,000 2,000
18
23
38
450
400
350
300
250
200
150
100
50
0
VISC
OSITY (m
.Pa.s.)
TEMPERATURE (˚C)
20 30 30 30 30 70
JEFF-FLOW® P 962 and P 964: Rheological Studies
Pour points: +30˚C +21˚C +21˚C
25.375 x 11 Paraffin_Layout 1 4/1/15 2:17 PM Page 2
Paraffins found in crude oil production continue tocause problems within the oilfield industry. With the number of maturing fields and new finds increasing, production companies are quickly facing this widespread
industry challenge.
At Huntsman Performance Products (Huntsman), we provide a numberof products globally to assist the oilfield industry in its quest to controlparaffins in oil production. Huntsman offers numerous pour point depressants for waxy crudes. Our chemistries work by modifying thecrystalline structure of the paraffins, making it difficult for them to form a “plug,” thus improving the flow of valuable hydrocarbons. Ourbreadth of products enables formulators to find the best product to match the paraffins found in the crude oil they are producing.
Additionally, Huntsman offers a full line of linear alcohol ethoxylates,which can be used along with other solvents, to help disperse theparaffins found in crude production.
Paraffin Control Product Offering Overview
JEFF-FLOW® P 359: Onsite Pour Point analysis
Crude Type South East Asian Crude
Blank Pour Point 30°C
SARA Analysis
Asphalthenes 0.70%
Resins 11%
Aromatics 16.3%
Saturates 72%
Wax Content 16%
JEFF-FLOW® P 964: laboratory Pour Point analysis
Crude Type South East Asian Crude
Blank Pour Point 38°C
WAT 58°C
Wax Content 18% - 22%
Huntsman Performance Products(Huntsman) offers an outstandingrange of surfactant technologies,world-scale manufacturing and aglobal distribution network.
JEFF-FLOW® P 359: Onsite Pour Point Analysis in this case study, JEFF-FlOW® P 359 was diluted with aromatic solvent.
JEFF-FLOW® P 964: Laboratory Pour Point Analysis in this case study, JEFF-FlOW® P 964 was diluted with aromatic solvent.
Effects of JEFF-FlOW® P 962 and JEFF-FlOW® P 964 on Viscosity of Paraffinic crude Oil
JEFF-FlOW® products tested at 500ppm dose rate.
JEFF-FLOW®
Pour PointDepressants — helping to solve flow assuranceproblems
The problem:
JEFF-FLOW® P 359 COMPETITOR
JEFF-FLOW® P 964 JEFF-FLOW® P 962 BLANK
Rheology studies with the same samples revealed a significant improvement in the flowability of thecrude oil containing either JEFF-FLOW® P 962or JEFF-FLOW® P 964. These products offer not only a reduction in pour point of the crude,but also a reduction in its viscosity, even as thetemperature is decreased.
Oil & Gas Surface Wells/Flowlines Equipment Pipelines
POuR POint DEPRESSantS
Polymers
JEFF-FLOW® P 359 n n n
JEFF-FLOW® P 961 n n n
JEFF-FLOW® P 962 n n n
JEFF-FLOW® P 963 n n n
JEFF-FLOW® P 964 n n n
JEFF-FLOW® P 965 n n n
BuilDinG BlOckS/cOmPOnEntS
Alkylbenzene Sulfonic Acids
NANSA® SSA n n
NANSA® SMA 118 n n
NANSA® SMA 122 n n
NANSA® SMA 159 n n
Nonylphenol Ethoxylates
SURFONIC® N Series n n n
TERIC® N Series n n n
Linear Alcohol Ethoxylates
SURFONIC® L24-2 n n n
SURFONIC® L24-9 n n n
Ethanolamines
Monoethanolamine (MEA) n n n
FORmulatED matERialS
Alkylaryl Sulfonate Amine Salt in Aromatic Solvent
JEFF-FLOW® P 303 n n n
JEFF-FLOW® P 303A n n n
JEFF-FLOW® P 309 n n n
Blank P 962 P 964
35
30
25
20
15
10
5
0
TEMPERA
TURE
(˚C)
DOSE RATE (PPM)
0 700 1,000 2,000
30 30
18
29
15
28 27
40
35
30
25
20
15
10
5
0
TEMPERA
TURE
(˚C)
DOSE RATE (PPM)
0 1,000 2,000
18
23
38
450
400
350
300
250
200
150
100
50
0
VISC
OSITY (m
.Pa.s.)
TEMPERATURE (˚C)
20 30 40 50 60 70
JEFF-FLOW® P 962 and P 964: Rheological Studies
Pour points: +30˚C +21˚C +21˚C
25.375 x 11 Paraffin_Layout 1 6/23/15 6:16 AM Page 2
Global headquartersHuntsman Corporation 10003 Woodloch Forest DriveThe Woodlands, Texas, 77380USATel : +1-281-719-6000Fax : +1-281-719-6055
South AmericaHuntsman Quimica Brasil Ltda.Av. Prof. Vicente Rao, 90Predio 122 - 2º andar04636-000São Paulo/SP BrazilTel : +55-11-2393-2482
Asia PacificHuntsman Performance Products 150 Beach Road#37-00 Gateway WestSingapore 189720Tel : +65-6297-3363Fax : +65-6296-3368
Australia61 Market Road Brooklyn Victoria 3012, Australia Tel : +61-3-9933-6696Fax : +61-3-9933-6656
Europe, Africa and Middle EastHuntsman Performance Products Everslaan 45 B-3078 EverbergBelgiumTel : 32-2-758-9211Fax : 32-2-758-9112Email : [email protected]
DisclaimerHuntsman Corporation warrants only that its products meetthe specifications stated in the sales contract. Typical proper-ties, where stated, are to be considered as representative ofcurrent production and should not be treated as specifications.While all the information presented in this document is believed to be reliable and to represent the best available dataon these products, HUNTSMAN MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, NON-INFRINGEMENT OF ANY INTELLECTUALPROPERTY RIGHT OF ANY THIRD PARTY, OR WARRANTIESAS TO QUALITY OR CORRESPONDENCE WITH PRIOR DESCRIPTION OR SAMPLE, AND ANY USER OF PRODUCTSDESCRIBED HEREIN SHOULD CONDUCT A SUFFICIENTINVESTIGATION TO ESTABLISH THE SUITABILITY OF ANYPRODUCT FOR ITS INTENDED USE AND ASSUMES ALLRISK AND LIABILITY WHATSOEVER RESULTING FROMTHE USE OF SUCH PRODUCT, WHETHER USED SINGLYOR IN COMBINATION WITH OTHER SUBSTANCES. Productsmay be toxic and require special precautions in handling. Forall products described herein, the user should obtain detailedinformation on toxicity, together with proper shipping, han-dling, and storage procedures, and should comply with allapplicable safety and environmental standards. The behavior,hazards and/or toxicity of the products referred to in this publication in manufacturing processes and their suitability inany given end-use environment are dependent upon variousconditions such as chemical compatibility, temperature, andother variables, which may not be known to Huntsman. It isthe sole responsibility of the user of such products to evalu-ate the manufacturing circumstances and the final productsunder actual end-use requirements and to adequately adviseand warn future purchasers and users thereof.
JEFF-FLOW®, NANSA®, TERIC® and SURFONIC® are registered trademarks of Huntsman Corporation or an affiliate thereof in one or more, but not all, countries.
Copyright © 2015 Huntsman Corporation or an affiliatethereof. All rights reserved.
Performance Products Global Technology
Manufacturing Location Research and Development Site Regional Office
South America
São Paulo (Brazil)
25.375 x 11 Paraffin_Layout 1 4/1/15 2:17 PM Page 1