Soundplane Micro Acoustic Baffle (SDPMC) - Spec Sheet
Transcript of Soundplane Micro Acoustic Baffle (SDPMC) - Spec Sheet
SDPMC – ACOUSTIC – SPECIFICATIONSSUSPENDED
ALWUSA.COM
SOUNDPLANE MICROTHE HARMONIC COLLECTION | ACOUSTICSSDPMC | SUSPENDED | SOUND BAFFLE
STANDARD SIZES0.5" WidthConfigurable in individual sections from 2ft to 8ft3 standard heights: 5.5", 12" and 16"
COLORS & FINISHES10 standard acoustic colorsCustom acoustic design cutouts available
CONSTRUCTIONSteel upper support0.5" PET polyester feltAcoustics conform to ASTM E84 Class A and EN13505-1 Class B fire ratings, and is 100% recyclable at end of life use
Customize with acoustic design cutouts
SDPMC – ACOUSTIC – SPECIFICATIONSSUSPENDED
ALWUSA.COM2 of 7
SS050720-A.0
PRODUCT SUBMITTAL WORKSHEET
SAMPLE PRODUCT CODESDPMC/T — S5 — ACW — DCSTM — MF 1 2 3 4 5
2. NOMINAL LENGTH (CHOOSE ONE)
S2S3S4S5S6S7S8
2' (24") section3' (36") section4' (48") section5' (60") section6' (72") section7' (84") section8' (96") section
*Lengths are nominal. To ensure Soundplane Acoustic Baffles match the exact lengths of the lighting fixtures on the project it's recommended to include all products on a single purchase order, provide a RCP (Reflective Ceiling Plan), and any additional details for ALW to review.
3. ACOUSTIC COLOR (CHOOSE ONE. SEE PAGE 6 FOR LARGER SWATCHES AND ADDITIONAL INFORMATION)
STANDARD COLORS
ACWAMWAHGACGAJB
Crystal WhiteMarble WhiteHeather GrayCharcoal GrayJet Black
AIWAAGATOASRAMB
Ivory WhiteAloe GreenTitan OrangeScarlet RedMidnight Blue
4. ACOUSTIC DESIGN (CHOOSE ONE)
NDCSTM
None. Choose for a solid acoustic insert.Custom Design Cutout (See template on page 4)
5. FINISH — INDIRECT SUPPORT (CHOOSE ONE. SEE PAGE 6 FOR LARGER SWATCHES AND ADDITIONAL INFORMATION)
MF Mill Aluminum
STANDARD FINISHES
ALUMINUM
SWSB
Satin WhiteSatin Black
SATIN ANODIZED EFFECT POWDER COAT
1. BASE MODEL (CHOOSE ONE)
SDPMC/SSDPMC/MSDPMC/T
SoundPlane Micro, 0.5", short acoustic baffle, suspended, 5.5" height SoundPlane Micro, 0.5", medium acoustic baffle, suspended, 12" height SoundPlane Micro, 0.5", tall acoustic baffle, suspended, 16" height
5 1/2"
1/2"12 "
1/2"
16 "
1/2"
SDPMC – ACOUSTIC – SPECIFICATIONSSUSPENDED
ALWUSA.COM3 of 7
SS050720-A.0
MECHANICAL DIAGRAMS
5 1/2"
1/2"12 "
1/2"
16 "
1/2"
SDPMC/S SDPMC/M SDPMC/T
SUSPENSION MOUNTING
CEILING HARDWARE (2) bullet mounts (2) 8' aircraft cables
SDPMC – ACOUSTIC – SPECIFICATIONSSUSPENDED
ALWUSA.COM4 of 7
SS050720-A.0
A
B
DIMENSION BASE MODEL CUT OUT AREA
A
SDPMC/S - 5.5" height 3.5"
SDPMC/M - 12" height 10"
SDPMC/T - 16" height 14"
B
S2 - 2' (24") length 22"
S3 - 3' (36") length 34"
S4 - 4' (48") length 46"
S5 - 5' (60") length 58"
S6 - 6' (72") length 70"
S7 - 7' (84") length 82"
S8 - 8' (96") length 94"
CUSTOM ACOUSTIC PATTERNSChoose from a solid acoustic sound absorber or create your own custom designs by following the instructions and template guidelines below. Gray areas indicate templates for acoustic pattern cutouts.
HOW TO SUBMIT YOUR CUSTOM ACOUSTIC PATTERN?1. DOWNLOAD THE ACOUSTIC CUSTOM PATTERN .ZIP FILE ON THE PRODUCT PAGE Open the appropriate .ai (Adobe Illustrator) or CAD .dxf file. 2. INPUT YOUR DESIGN WITHIN THE TEMPLATE AREA. Template area will be marked with a dashed perimeter.3. SAVE YOUR FILE. INCLUDE THE PROJECT NAME AND OTHER SUPPORTING INFO AT THE END OF THE FILE NAME. For example, "SDPMC Custom Acoustic Design Template - Project ALW".4. SUBMIT FORMS BELOW TO ALW FOR REVIEW. 1. Acoustic Design Template File 2. Product Code and Quantities
*Lengths are nominal. To ensure Soundplane Acoustic Baffles match the exact lengths of the lighting fixtures on the project it's recommended to include all products on a single purchase order, provide a RCP (Reflective Ceiling Plan), and any additional details for ALW to review.
SDPMC – ACOUSTIC – SPECIFICATIONSSUSPENDED
ALWUSA.COM5 of 7
SS050720-A.0
COMMON LAYOUTSThe following baffle layouts and on-center spacings are typical in the industry based on sound absorption efficiency, ease of installation, or aesthetics. When including lighting fixtures in your design, simply place the fixture on-center with a common baffle layout of your choice.
ALW's 0.5" width PET acoustics as a 2D absorber have a NRC (Noise Reduction Coefficient) of 85%. Full test reports of common layouts for 3D absorbers including NRC and Sabin values will be available shortly.
16", 18" and 24" on- center spacings are
recommended as the most effective sound
absorption layouts
24" OC
12" OC
8" OC
16" OC
18" OC
SDPMC – ACOUSTIC – SPECIFICATIONSSUSPENDED
ALWUSA.COM6 of 7
SS050720-A.0
STANDARD FINISHES - TOP SUPPORT BRACKETStandard finishes are available at no additional charge.
ACOUSTIC COLORS & INFORMATIONThe Harmonic Collection features 10 acoustic material colors comprised of 0.5" (12mm) PET polyester fibers, specially designed for premium sound absorption. ALW's PET acoustics as a 2D absorber have a NRC (Noise Reduction Coefficient) of 85%. Each panel is precision-cut to size using our CNC-cutting process, enabling a wealth of design options from beveled edges to custom cutouts. All panels conform to ASTM E84 Class A and EN13501-1 Class B fire ratings.
CrystalWhite
MarbleWhite
HeatherGray
CharcoalGray
JetBlack
IvoryWhite
AloeGreen
TitanOrange
ScarletRed
MILL FINISH
MF
Mill FinishRaw Metal
SatinWhite
SW
SatinBlack
SB
SATIN ANODIZED EFFECT POWDER COAT
MidnightBlue
Top Support Bracket
SDPMC – ACOUSTIC – SPECIFICATIONSSUSPENDED
ALWUSA.COM7 of 7
SS050720-A.0
ADDITIONAL OPTIONS & SPECIFICATIONSACOUSTICS Material: 0.5" (12mm) PET polyester fibers. Acoustic sound absorbers are 100% recyclable at end of life use.NRC Rating: Our acoustics as a 2D absorber have a Noise Reduction Coefficient of 85%. Full test reports of common layouts for 3D absorbers including NRC and Sabin values will be available shortly. Fire Rating: Conforms to ASTM E84 Class A. Also conforms to EN13501-1 Class B.
OPERATING TEMPERATURE
Product should be installed in dry environments where the ambient temperature ranges from -4°F to 122°F ( -20°C to 50°C). Product installed in environments outside the listed temperature range voids the warranty AND may damage the product.
CARE
Remove dust with compressed air, a vacuum, or lint roller.
WARRANTY
Limited 5-year warranty. Details: alwusa.com/warranty