Soundown Yacht Presentation
-
Upload
bovamarine -
Category
Documents
-
view
8.096 -
download
0
description
Transcript of Soundown Yacht Presentation
Est. 1983 Locations:
• Salem, MA• Marblehead, MA• Ft. Lauderdale, FL• Manitowoc, WI
50 Employees
CORPORATE OVERVIEW
MARKETS
Marine Power
Generation Military Recreational
Equipment Medical Appliances
Building Construction
Transportation Industrial/OEM Building
Construction Computer &
Business Equipment
Noise & Vibration Control
Solutions for Yachts
Noise & Vibration ControlAboard Commercial Vessels
• Vibration Isolators
• Exhaust Silencers
• Insulation
• Products for Quiet Interiors
Vibration Isolation
Engines
Generators
Pumps
Exhaust Stacks
Piping Systems
Shock Mitigation
Hydraulic Piping
Electronics
Deck Equipment
Interiors
Engine & Auxiliary Equipment Mounts
Medium and High Speed Diesels
Free Standing Propulsion Engine
Single or Double Mounting of Generators
Conical Mounts
TT Mounts
Thrust Carrying Engine/Gear box Systems
Propulsion Engines in High Impact Craft
Equipment Mounts
Auxiliary Equipment of all Sizes
Plumbing, HVAC, and Other Systems
Propulsion Engine Installations
Good
Better
Best
Close coupled Engine/Gearbox with Rubber Design TT Mounts
Freestanding Engine on RD Conical Mounts With the Gearbox on 095 Semi-elastic Gear Mounts
Engine/Gearbox on Combining Rail and RD Conical Mounts Thrustblock With ERD Double Coupling
Exhaust Stack Mounts
Fixed Points
Stabilizers
Compensators
Isolated Rain Caps
Isolate Exhaust Piping at Fixed Positions
Isolate Exhaust Piping and Allow Thermal Growth
Isolate Movement Between Pipe Sections
Flexible, Drip-Free Deck Penetrations
Shock Mounts
Applications
• Pumps, Motors, Electronics Cabinets….
• High Shock Environments
• Equipment Requiring an Extremely High Degree of Isolation
Advantages
• Deflections of 50mm or More in All Directions
• Protect Equipment from Shock Events
• Meets Requirements of MIL-901D, MOD, STANAG….
• Calculate Static and Dynamic Loading
Waterdrop Exhaust Silencers
Lloyds approved FRP wet exhaust systems
Main engines and generators
Discharge above water, below water, or stack
Custom configurations to fit any machinery space
Patented designs for the quietest yachts
How do Waterdrop Silencers Work
Exhaust gas and water are separated inside the muffler to allow our tuned resonators to cancel exhaust tones. This eliminates exhaust rumble and splashing that can be heard on deck or in the accommodations.
All internal components of our Waterdrop Silencers are designed to your application. This allows the internal resonators to be tuned to the firing rate and gas flow of your engine.
With the water and gas separated cool dry exhaust gas can be routed overboard, underwater, or up the stack in FRP tubing reducing weight and installed cost of steel piping and insulation.
Generator Installations
Conventional Waterdrop Silencer
Vertical format provides the greatest degree of water and gas separation.
Recommended for stack discharges.
Systems with integrated soot sinkers greatly reduce floating soot particles
Generator Installations
Axial Waterdrop Silencer
Horizontal format is configurable into the tightest machinery spaces
Can be configured for installation on top of generators where floor space and walking areas are limited
Mounting options from above or below
Propulsion Engine Installations
Towers Mufflers
Gas/water separation system facilitates the quietest installation.
No engine noise
No splashing of water
Configurable for hullside or stack discharge
Custom parts can be designed to fit in even the tightest engine room
Systems with integrated soot sinkers greatly reduce floating soot particles
Lloyd’s of London approved
Propulsion Engine Installations
Towers Mufflers
Designed to provide quieting of gas exiting below waterline in a compact muffler
Minimal back pressure contribution
Used in conjunction with a Conventional Waterdrop for critical silencing of bypass
Ideal for midship or aft engine room configurations.
Equipped with 150lb class flanges for classified vessels
Propulsion Engine Installations
Axial Waterdrop Silencers
Axial format is ideal for installation outboard and aft of main engines.
Round or elliptical shells allow these silencers to be optimized for the avialable space without sacrificing critical internal volume
Water can be drained away separately or recombined with gas for a common discharge
Available with multiple inlets for twin turbo or triple/quad engine installations
Insulation Products
Acoustic
Thermal
Structural Fire Protection
Floated Floors
IMO Approvals
MIL and NATO Compliance
Electronics
Deck Equipment
Interiors
Incombustible Hull Board
• Acoustic, Machinery Spaces Insulation
• Thermal, Hull and Deck Insulation
Applications
Advantages
• IMO Certified as Incombustible
• Easily Shaped for Fast Installation
• Excellent Thermal Insulation, K Factor of 0.23 @ 75C
• Superior Acoustic Performance, NRC of 1.05 @ 2”
Polyimide Foam
• Acoustic, Machinery Spaces Insulation
• Thermal, Hull and Deck Insulation
• Pre-form Beam Wraps
Applications
Advantages
• Meets DOD-I-6488
• Extremely Low Weight, 0.39lb/ft3 (6kg/m3)
• Low Flame Spread and Smoke Development
• Reduced Fuel Consumption
• Increase Stability
Mineral Wool
• Structural Fire Protection
• Acoustic, Machinery Spaces Insulation
• Thermal, Hull and Deck Insulation
• Floated Floors
Applications
Advantages
• A, B, and H Class Certificates
• Certified on Aluminum and/or Steel
• Low Cost
• Good Thermal & Acoustic Properties
Promaguard Panels
• Structural Fire Protection
• Thermal Insulation
Applications
Advantages
• Minimal Thickness, A-60 Aluminum Requires Only 20mm
• Light Weight
• Approvals on Aluminum, Steel, GRP and Wood
• Allows Maximum Interior Space
Vinyl/Foam Composite
• Soundproofing of Machinery Spaces in Vessels Under 20M
• Insulation of Sound Shields
• Small Equipment Spaces
Applications
Advantages
• Easy to Cut and Install
• Decoupled Barrier Greatly Increases transmission loss
• Uses Hydrolytically Stable Polyether Foam for Long Lasting Installations
• Available as Precut Kits
Acoustic Absorption Foam
• Hull Sides in Vessels Under 20M
• Reduce Reverberant Noise Around Machinery
Applications
Advantages
• Light Weight
• Easy to Cut and Install
• Uses Hydrolytically Stable Polyether Foam for Long Lasting Installations
• Available as Precut Kits
• Multiple Facing Options
Mass & Damping Products
Mil Spec Materials
IMO Approved Materials
Extensional Damping
Constrained Damping
Soundown Damping Tile
• Decks
• Bulkheads
• Machinery Foundations
• Bow Thrusters
Applications
Advantages
• High Dynamic Loss Factors
• Manufactured IAW Mil-PRF-26353D, QPL Listed
• Easily Cut and Installed
TuffMass
• Hanging Acoustic Gaskets Sealing Partition Bulkheads to Becks
• Privacy Bulkheads
• Add Mass to Side Lining Panels
Applications
Advantages
• STC 26
• Highly Damped
• Easily Cut and Installed
• Available with Pressure Sensitive Adhesive for Ease of Installation
Products for Quiet Interiors
Reduce Airborne and Structure Borne noise from Machinery and Hydrodynamic Sources
Increase Cabin to Cabin Privacy
Eliminate Foot Fall Noise from Upper Decks
Allow for Full Utilization of Audiovisual Systems
Typical Bulkhead Constructions
Good
• 6/3/6 15mm QuietCore Plywood as one of the rough wall panels
• Soundown Microlite Acoustic Fill in Cavity Between Studs
Better
• 6/6/6 18mm QuietCore Plywood as one of the rough wall panels
• Floated in Soundown IsoStrips
• Soundown Microlite Acoustic Fill in Cavity Between Studs
Typical Sole Constructions
Good
• 25mm Plywood subfloor
• Soundown IsoStrips Bonded to Frame to Isolate Copy Sole
• Soundown Microlite Acoustic Fill in Cavity
Better
• 6/6/6 18mm QuietCore Plywood Copy Sole
• Floated in Soundown IsoStrips
• Soundown Microlite Acoustic Fill in Cavity Between Studs
QuietCore Damped Plywood
• Soles
• Bulkheads
• Plenums and Ventilation Ducts
Applications
Advantages• Higher Transmission Loss Than
Plywood of the Same Weight
• Improved Damping Characteristics
• Standard Panels are Constructed with Meranti (Okume is Optional)
• Works with Standard Construction Methods
Sylomer & IsoStrips
• Isolated Soles
• Isolated Bulkheads
• Machinery Isolating
• Piping Isolation
Applications
Advantages
• Multiple Grades to Handle Variable Loads
• Increase Cabin to Cabin Privacy
• Reduce Radiation of Machinery Noise into Accommodations
• Prefabricated IsoStrips for Easy Installation
Premium Carpet Underlayment
• Salons
• Staterooms
Applications
Advantages
• Reduce Structureborne Noise
Radiated Off Decks
• Increase Privacy Between
Decks
• Eliminate Foot Fall Noise
• Plush Underfoot Feel
• Easily Installed
QuietCore Plywood
Good
• 6/3/6 15mm QuietCore Plywood as one of the rough wall panels
• Soundown Microlite Acoustic Fill in Cavity Between Studs
Better
• 6/6/6 18mm QuietCore Plywood as one of the rough wall panels
• Floated in Soundown IsoStrips
• Soundown Microlite Acoustic Fill in Cavity Between Studs
Typical Bulkhead Constructions
Good
• 6/3/6 15mm QuietCore Plywood as one of the rough wall panels
• Soundown Microlite Acoustic Fill in Cavity Between Studs
Better
• 6/6/6 18mm QuietCore Plywood as one of the rough wall panels
• Floated in Soundown IsoStrips
• Soundown Microlite Acoustic Fill in Cavity Between Studs
CAPABILITIES/SERVICES Specification Review Insulation Plans Sea Trials 2D & 3D Drawings Solid Body Analysis FEA Acoustic
Calculations
Custom Fabrication
Short Lead Times Mil Spec Products IMO Approved
Products Kitted Parts
Thank You For Your TimeREPRESENTED BY:
Robert A. [email protected]
P: 978.745.7000F: 978.745.0900
www.soundown.com