BMZ001 SeriesWearable Motion-Activated Musical Bandz

Age grade: 8 - Adult

8 - Adult

User Guide User Guide

Get Started

*Please refer to the product website for the recommended model of smartphones or tablets. https://soundmoovz.dmetproducts.co.jp

1. Install SoundMoovz™ App from App Store or Google Play. If you have already installed SoundMoovz™ Application, check for available updates and make sure that the latest version is installed.User friendly instructions on how to use the App are included in the App.

SoundMoovz™ bandz are adjustable from 5.6 – 8.9 inch (14.3 cm –22.6 cm). Center SoundMoovz™ on top of your wrist or ankle.

shoes by putting the SoundMoovz™ Device through your shoelaces TWICE as shown in the image below.

Make sure to place the SoundMoovz™ Device between the second or third eyelets tightly (DO NOT put the device between top eyelets).

3. Start with SoundMoovz™ powered off. Slide the switch shown in the image below. The LED will light for 2 seconds and will turn off. The power is now on.

4. Move and play with the sound and the App.

SwitchLED light

5. IMPORTANT! TO PRESERVE BATTERY LIFE ALWAYSSWITCH OFF SoundMoovz™ WHEN NOT IN USE.

Battery Life

Continuous Operation Time Up to 150 hours

Stand By Time Up to 250 hours

Note: This alternative method is the only one recommended and no

Slide the band to adjust the fit and snap the pininto the hole. For best results, SoundMoovz™bandz should have a snug fit.

responsibility will be taken for any breakage or malfunction occurredwhen the SoundMoovz™ Device is put on in different ways.

WARNING! This product contains a Button or Coin Cell Battery. A swallowed Button or Coin CellBattery can cause internal chemical burns in as little as two hours and lead to death. Dispose ofused batteries immediately. Keep new and used batteries away from children. If you think batteriesmight have been swallowed or placed inside any part of the body, seek immediate medical attention.IMPORTANT: Please retain packaging/instructions and purchase details for future reference asthey contain important information.

Model Number: BMZ001Item Number

BLACK 66001BLUE 66002PINK 66003

5.6 inch (14.3 cm)

8.9 inch (22.6 cm)

Included in this Box

SoundMoovz™ FAQ

Front

Back

• SoundMoovz™ Device x 2• Band x 2

• Battery CR2032 Installed Inside x 2• Instruction Manual x 1

Product Checklist and Parts Identification

• Why is there a delay between movement and hearing sound? If connecting to a separate speaker, use an auxiliary cord for a direct connection, instead of using Bluetooth®.

• Why is there either no sound or multiple sounds coming from mobile device/speaker? Adjust the sensitivity setting on the app – the higher the setting, the more sensitive to movement. Sensitivity settings can be located on the top right of the pop-up tab when you tap on the device balloon to change sounds. Repeat for all your SoundMoovz™ bandz.

If using auxiliary cable, make sure it is plugged in securely into both mobile device and speaker; you may need to remove case from mobile device to allow cable to be inserted correctly (if case is removed, make sure mobile device is in a secure position to prevent damage).

• Why does phone lock cause app to stop working? Newest version of app allows continuous play, even when phone is in lock mode (make sure you have latest version installed). If that does not work, go to your phone settings and disable auto-lock feature while playing with SoundMoovz™.

• What IOS or Android update is needed to install app? IOS: 10 or later Android: 4.4 or later

• How do I pair SoundMoovz™ to my Bluetooth® device? Turn on Bluetooth® from settings on your smart device. Open SoundMoovz™ app and tap icon “+” to search for pairing. When SoundMoovz™ is ON, a device icon will be displayed on the screen. Tap the device icon for pairing. When paired, a check symbol is shown over the device icon.• Why is my band not turning on? Battery may need replacement – replace with a CR2032 battery.

About Battery

Installation and replacing battery1. Use a PH0 screwdriver.2. Turn counter clockwise to open the battery lid cover. Carefully remove the CR2032 battery.3. Replace a new CR2032 battery. 4. Make sure that the positive(+) is facing in the correct direction.5. Turn clockwise to shut the battery lid cover.

+CR2032

• Only use “CR2032” coin type lithium batteries (primary batteries).• Do not use rechargeable batteries.• Non-rechargeable batteries must not be recharged.• Different types of batteries, or new and used batteries must not be mixed. • Only batteries of the same or equivalent type as recommended should be

used.• Batteries should be replaced by an adult.• Batteries must be inserted following the correct polarity.• Exhausted batteries should be removed from the product.• The supply terminals must not be short-circuited.• Batteries should be removed from the product when not in use.

• Batteries supplied are for demonstration purposes only and may require replacing within a short period of time.

Pairing via Bluetooth®

SoundMoovz™ is designed to be connected to a tablet and smartphonewith Bluetooth 4.2.*Pairing steps may differ due to the update of the App in future1. Turn on Bluetooth® from Settings in your smartphone or tablet.2. Open SoundMoovz™ App.3. Tap the icon “+” and search for pairing.4. When SoundMoovz™ is ON, a device icon will be displayed on the screen.5. Tap the device icon for pairing.6. When a check symbol is shown over the device icon; close the pop-up display.7. A balloon appears on the background, tap the balloon.8. Pick a sound from the side bar menu.9. Shake SoundMoovz™ device and the sound emits from the smartphone or tablet. Check and adjust the volume of the smartphone or tablet. Make sure silence mode is not on.10. SoundMoovz™ is successfully paired via Bluetooth®

11. Please repeat the steps if fails in pairing. Or, inquire via “Support” from the App.

Battery Recyling Information

Help the environment by disposing of batteries responsibly. The wheelie bin symbol indicates that batteries must not be disposed of in domestic waste as they contain substances which can be damaging to the environment and health. Please remove exhausted batteries from the product and use designated collection points or recycling facilities when disposing of batteries.

Dmet Products Corp. hereby declares that this radio equipment is manufactured in compliance with the essential requirements and other relevant provisions of directive 2014/53/EC. A copy of Declara-tion of Conformity can be obtained from Customer Service Department at LaRose Industries, LLC,d/b/a Cra-Z-Art, Randolph, NJ 07869 USA.

• Target Age: 8 years to adult• Package dimensions[cm]: W: 11.4 / H: 18 / D: 7• Weight[g]: 24• Battery type: CR2032 lithium button cell battery (Primary cell)• Battery nominal voltage: 3[V]• Wireless standard: Bluetooth 4.2• Bluetooth frequency range: 2.402[GHz]-2.48[GHz]• Maximum RF output power of the product: 0.63mW• Software version: DMT01 V0.2• Firmware version: 0.0.1• FCC ID: 2ALX7001• IC: 22677-001

©2017 Cra-Z-Art© All Rights Reserved. LaRose Industries, LLC, d/b/a Cra-Z-Art, Randolph, NJ 07869 USA. Conforms to ASTM F963. Products and colors may vary from those shown. At CRA-Z-ART©, we guarantee

1-800-CRA-Z-ART or visit www.Cra-Z-Art.com. MADE IN CHINA.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and anyuse of such marks by LaRose Industries, LLC, d/b/a Cra-Z-Art and Dmet Products Corp. is under license.Other trademarks and trade names are those of their respective owners.

Google Play and the Google Play logo are trademarks of Google Inc.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.App Store is a service mark of Apple Inc., registered in the U.S. and other countries.

Regulation Compliance InformationRegulation Compliance Information

FCC Compliance Statement Radio and Television InterferenceThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Caution:

user’s authority to operate the equipment.FCC Statement:“This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular in-stallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.—Consult the dealer or an experienced radio/TV technician for help.”

The equipment described in this manual generates, uses, and can radiate radio-frequency energy. If it is not installed and used properly—that is, in strict accordance with Dmet Products’ instructions—it may cause interference with radio and television reception.This equipment has been tested and found to comply with the limits for Class B digital device in accor-

-sonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.You can determine whatever your computer system is causing interference by turning it off. If the interfer-ence stops, it was probably caused by the computer or one of the peripheral devices.If your computer system does cause interference to radio or television reception, try to correct the inter-ference by using one or more of the following measures:• Turn the television or radio antenna until the interference stops.• Move the computer to one side or the other of the television or radio.• Move the computer farther away from the television or radio.• Plug the computer into an outlet that in on a different circuit from the television or radio. (That is, make certain the computer and the television or radio are on circuits controlled by different circuit breakers or fuses.)If necessary, consult an Dmet Products’ Authorized Service Provider or Dmet Products. See the service and support information that came with your Dmet Products’ product. Or consult an experienced radio and television technician for additional suggestions.Important: the FCC compliance and negate your authority to operate the product.This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables (including Ethernet cables) between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, television sets and other electronic devices.

Responsible party (contact for FCC matters only):Dmet Products Corp.Fuji-soft Bld. 12F, 3 Kanda-Neribeicho, Chiyoda-ku, Tokyo, 101-0022, Japan

©2017 Dmet Products Corp. All rights reserved. SoundMoovz™ and the SoundMoovz™ logo are trademarks of Dmet Products Corp.Fuji-soft Bld 12F, 3 Kanda-Neribeicho, Chiyoda-ku, Tokyo, 101-0022, Japan.Designed in Japan. Made in China.