SONIPAT-131001 State / UT HARYANA : -2246757 9466824004 · 2019-02-28 · Mandatory Disclosure 1....
Transcript of SONIPAT-131001 State / UT HARYANA : -2246757 9466824004 · 2019-02-28 · Mandatory Disclosure 1....
Mandatory Disclosure
1. Name of the Institution : GOVT. POLYTECHNIC, SONIPAT Address of the Institution : RATHDHANA ROAD
City & Pin Code : SONIPAT-131001
State / UT : HARYANA
Phone number with STD code : 0130-2246757
FAX number with STD code : 0130-2246757 Mobile : 9466824004
Email : [email protected]
Website : www.gpsonipat.ac.in
2. Name and address of the Trust/ Society/ Company and the Trustees : NOT Applicable
3. Name of Principal / Director : ANIL KUMAR
Exact Designation : PRINCIPAL
Address : A-1, Staff Colony, G. P. Sonipat
Phone number with STD code : 0130-2246757
Mobile : 9466824004
Email : [email protected]
4. Name of the affiliating University : STATE BOARD OF TECHNICAL
EDUCATION, HARYANA Address : BAYS NO. 7-12, SECTOR-4,
PANCHKULA-134112 Website : www.hsbte.org.in
5. Governance
• Members of the Board and their brief background : ---NA-----
• Members of Academic Advisory Body : ---NA-----
• Frequently of the Board Meeting and Academic Advisory Body : ---NA-----
• Nature and Extent of involvement of Faculty and students in academic
affairs/improvements
• Classroom level teaching learning using audio visual aids.
• Skill training in labs, workshops, industrial training and projects.
• Smart class rooms are available for better learning.
• Lectures by experts from industries are also arranged.
• Industrial visits and tours are also arranged for students.
• Time-to-time seminars are also arranged
• Mechanism/Norms and Procedure for democratic/good Governance AVAILABLE
• Student Feedback on Institutional Governance/Faculty performance AVAILABLE
• Grievance redressal mechanism : YES
for faculty, staff and students
• Establishment of Anti Ragging Committee : YES
• Establishment of Online Grievance Redressal Mechanism : YES
• Establishment of Grievance Redressal Committee in the Institution : YES
• Establishment of Internal Complaint Committee (ICC) : YES
• Establishment of Committee for SC/ ST : YES
• Internal Quality Assurance Cell : YES
• Organizational chart and processes
6 Programmes
• Name of Programmes approved by AICTE
▪ Diploma in Automobile Engg.
▪ Diploma in Chemical Engg.
▪ Diploma in Computer Engg.
▪ Diploma in Electrical Engg.
▪ Diploma in Electronics & Comm. Engg.
▪ Diploma in Finance, Account & Auditing
▪ Diploma in Instrumentation & Control Engg.
▪ Diploma in Mechanical Engg.
PRINCIPAL
HEAD OF THE
DEPARTMENT
W/S SUPDT.
DEPUTY SUPDT.
SENIOR LECTURER
LECTURER
FOREMAN
INSTRUCTOR
WORKSHOP
INSTRUCTOR
ASSISTANT
CLERK/ JR. SCALE
STENO
PEON/SWEEPER
• Name of Programmes Accredited by AICTE NONE
• Status of Accreditation of the Courses
• Total number of Courses : 8
• No. of courses for which applied for Accreditation : 1
• Status of Accreditation : Preliminary
• Placement Facilities: The following facilities are available for placement in this institution:
➢ A Separate Training & Placement Cell
➢ Industry-Institution-Interaction Cell
➢ MoU with Industries
➢ Interview Room
➢ Smart Class Room
➢ Personality Development Classes
1) Name : Automobile Engg.
Number of seats : 120
Duration : 3 years
Cut-off marks during the last three years : 45 40 40
Fee(per annum) : Tuition Fee* : 3000/-
Development charges : 1500/-
Student Fund : 1200/-
* No Tuition fee for girl students Campus placement in last three years : 27 37 45
Minimum Pay package, Rs./Year : 120000/-
Average Pay package, Rs./Year : 180000/-
Maximum Pay package, Rs./Year : 300000/-
-----------------------------------------------------------------------------------------------------------------------------------
2) Name of the Department : CHEMICAL ENGG.
Number of seats : 60
Duration : 3 years
Cut-off marks during the last three years : 50 52 50
Fee(per annum) : Tuition Fee* : 3000/-
Development charges : 1500/-
Student Fund : 1200/-
* No Tuition fee for girl students Campus placement in last three years : 22 33 85
Minimum Pay package, Rs./Year : 144000/-
Average Pay package, Rs./Year : 190000/-
Maximum Pay package, Rs./Year : 300000/-
-----------------------------------------------------------------------------------------------------------------------------------
3) Name of the Department : COMPUTER ENGG.
Number of seats : 60
Duration : 3 years
Cut-off marks during the last three years : 50 58 54
Fee(per annum) : Tuition Fee* : 3000/-
Development charges : 1500/-
Student Fund : 1200/-
* No Tuition fee for girl students Campus placement in last three years : 9 4 7
Minimum Pay package, Rs./Year : 120000/-
Average Pay package, Rs./Year : 173000/-
Maximum Pay package, Rs./Year : 336000/-
-----------------------------------------------------------------------------------------------------------------------------------
4) Name of the Department : ELECTRICAL ENGG.
Number of seats : 60
Duration : 3 years
Cut-off marks during the last three years : 58 59 61
Fee(per annum) : Tuition Fee* : 3000/-
Development charges : 1500/-
Student Fund : 1200/-
* No Tuition fee for girl students Campus placement in last three years : 18 8 18
Minimum Pay package, Rs./Year : 120000/-
Average Pay package, Rs./Year : 180000/-
Maximum Pay package, Rs./Year : 300000/-
-----------------------------------------------------------------------------------------------------------------------------------
5) Name of the Department : ELECTRONICS & COMM. ENGG.
Number of seats : 60
Duration : 3 years
Cut-off marks during the last three years : 40 41 42
Fee(per annum) : Tuition Fee* : 3000/-
Development charges : 1500/-
Student Fund : 1200/-
* No Tuition fee for girl students
Campus placement in last three years : 11 2 10
Minimum Pay package, Rs./Year : 100000/-
Average Pay package, Rs./Year : 160000/-
Maximum Pay package, Rs./Year : 300000/-
-----------------------------------------------------------------------------------------------------------------------------------
6) Name of the Department : INSTRUMENTATION & CONTROL ENGG.
Number of seats : 60
Duration : 3 years
Cut-off marks during the last three years : 41 40 41
Fee(per annum) : Tuition Fee* : 3000/-
Development charges : 1500/-
Student Fund : 1200/-
* No Tuition fee for girl students Campus placement in last three years : 5 4 8
Minimum Pay package, Rs./Year : 130000/-
Average Pay package, Rs./Year : 190000/-
Maximum Pay package, Rs./Year : 300000/-
----------------------------------------------------------------------------------------------------------------------------------------
7) Name of the Department : FINANCE, ACCOUNT & AUDITING
Number of seats : 60
Duration : 3 years
Cut-off marks during the last three years : 40 38 39
Fee(per annum) : Tuition Fee* : 3000/-
Development charges : 1500/-
Student Fund : 1200/-
* No Tuition fee for girl students Campus placement in last three years : 5 4 6
Minimum Pay package, Rs./Year : 100000/-
Average Pay package, Rs./Year : 190000/-
Maximum Pay package, Rs./Year : 300000/-
----------------------------------------------------------------------------------------------------------------------------------------
8) Name of the Department : MECHANICAL ENGG.
Number of seats : 120
Duration : 3 years
Cut-off marks during the last three years : 65 68 67
Fee(per annum) : Tuition Fee* : 3000/-
Development charges : 1500/-
Student Fund : 1200/-
* No Tuition fee for girl students Campus placement in last three years : 52 49 80
Minimum Pay package, Rs./Year : 144000/-
Average Pay package, Rs./Year : 200000/-
Maximum Pay package, Rs./Year : 420000/-
----------------------------------------------------------------------------------------------------------------------------------------
• Name and duration of programme(s) having Twinning and Collaboration with Foreign University(s) and being
run in the same Campus along with status of their AICTE approval NOT APPLICABLE
7. Faculty
Branch wise list Faculty members
Name of
Discipline
Name of post Name of Officer
Principal Sh. Anil Kumar
App.Sc. Deptt. Sr. Lect. Chemistry Dr. R. S. Chauhan
Sr. Lect. English Smt. Pushpa Rani
Lect. Math Smt.Kiran
Lect. Math Smt. Anju Rani
Lect. Math Smt. Poonam
Lect. Physics Sh. Birender Sangwan
Lect. Physics Smt. Sweety Chikkara
Lect. Physics Smt. Jyoti Dalal
Lect. English Smt. Kamlesh
Mech.Engg.Dept. Lecturer Sh. Shivender Dahiya
Lecturer Sh. Ramesh Kumar
Lecturer Sh. Vipin Kumar
Lecturer Sh. Parveen Malik
Lecturer Sh. Sartaj Singh
Lecturer Sh. Baljeet Singh
Lecturer Sh. Harsh Chaudhary
Lecturer Sh. Harish Dhingra
Lecturer Sh. Rajesh Kumar
Chemical Deptt. HOD Sh. Parvesh Kumar
Sr. Lect. Sh. Jasbir Singh
Lecturer Sh. Latish Chhabra
Lecturer Sh. Kuldeep Gulia
Lecturer Sh. Samarpal Singh
Electrical Deptt. Lecturer Sh. Ranbir Dahiya
Lecturer Sh. Nar Singh Parmar
Lecturer Smt. Preeti
I & C Deptt. HOD Smt. Suparna A.
Sr. Lect. Sh. Virender Kumar
Lect. Sh. Kunaljeet Singh
Lect. Sh. Jai Parkash
Lect. Sh. Puneet Kaushik
Lect. Smt. Bunty
Lect. Sh. Krishan Kumar
ECE Deptt. HOD Sh. T.P.S Rawat
Sr. Lect. Sh. Lincoln Hadda
Lect. Smt. Ramesh Kumari
Lect. Sh.Vikas Kadian
Lect. Sh. Patanjali
Lect. Smt. Pooja Sindhu
Lect. Sh. Manoj Kumar
Computer Deptt. H.O.D. Sh. Dinesh Singh (Sr.
Lecturer)
Sr. Lecturer Sh. Pankaj Malik
Lecturer Smt. Poonam Dahiya
Lecturer Smt. Garima Rohilla
Lecturer Sh. Virender Singh
Lecturer Smt. Naresh Kumari
Lecturer Sh. Tejbir Chhikara
Auto Deptt. Sr. Lecturer Sh. Vijay Singh
Lecturer Sh. Jogesh Dahiya
Lecturer Sh. S. L. Gupta
FAA Lecturer Sh. Ravinder Dahiya
• Permanent Faculty : 53
• Adjunct Faculty : NIL
• Permanent Faculty :Student Ratio : 1:34
• Number of Faculty employed and left during the last three years
Employed : 12 Left : 10
8. Profile of Principal
i. Name : Anil Kumar
ii. Date of Birth : 22.09.1968
iii. Unique Id : 3D5GQR
iv. Educational Qualification : B.E. (Civil Engg.),
PG Dip., L.L., L.W. & Personal Management
v. Work Experience
• Teaching : 25years
vi. Area of Specialization : Civil Engg.
Automobile Engg. Department
Name of Teaching Staff VIJAY SINGH
Designation SENIOR LECTURER
Department AUTOMOBILE ENGG.
Date of Joining the Institution 09/08/2017
Qualifications with Class/Grade UG B.E. (MECH. ENGG.) 1ST CLASS
PG M.TECH. (PRODUCTION ENGG.) 1ST CLASS
Total Experience in Years Teaching 19 YEARS
Papers Published International 01
PHOTO
Papers Presented in Conferences International 01
Books Published / IPRs/ Patents 03 BOOKS
Automobile Engg.
Chassis Body & Transmission
Motor Vehicle Act & Transport Management
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Name of Teaching Staff SANJIV LOCHAN GUPTA
Designation LECTURER
Department AUTOMOBILE ENGG.
Date of Joining the Institution 12/03/2007
Qualifications with Class/Grade UG B.E., 1ST CLASS
PG M.TECH. 1ST CLASS
Total Experience in Years Teaching 19 YEARS
Industry 2 YEARS
Papers Published National 01
Papers Presented in Conferences National 01
Professional Memberships ISTE
Consultancy Activities CDTP INTERNAL CO-ORDINATOR
Awards PRESIDENT OF INDIA, SILVER MEDAL
Interaction with Professional
Institutions NITTTR, CDTP PROJECT
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Name of Teaching Staff JOGESH DAHIYA
Designation LECTURER
Department AUTOMOBILE ENGG.
Date of Joining the Institution 28/08/2009
Qualifications with Class/Grade UG B.TECH.(MECH. ENGG.) 1ST DIVISION
PG M.TECH.(MANUFACTURING AUTOMATION) 1ST DIVISION
MBA(PROD. OPERATION MANAGEMENT) 1ST DIVISION
Total Experience in Years Teaching 11 YEARS
Industry 2 YEARS
Papers Published National 01
International 02
Papers Presented in Conferences National 01
International 02
Name of Teaching Staff PARVEEN MALIK
Designation LECTURER
Department AUTOMOBILE ENGG.
Date of Joining the Institution 03/03/2009
PHOTO
PHOTO
Qualifications with Class/Grade UG B.E.(MECH. ENGG.)
Total Experience in Years Teaching 09 YEARS
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Instrumentation & Control Engg. Department
Name of Teaching Staff SUPARNA AMBESANGE
Designation HOD
Department ELECTRONICS & COMM. ENGG.
Date of Joining the Institution 26/08/2009
Qualifications with Class/Grade UG B.E. ELEX. (DISTINCTION)
PG M.E. ELEX. (DISTINCTION)
Total Experience in Years Teaching 28 YEARS
Name of Teaching Staff VIRENDER KUMAR
Designation SENIOR LECTURER
Department ELECTRONICS & COMM. ENGG.
Date of Joining the Institution 11/05/2016
Qualifications with Class/Grade UG B.TECH. (2ND CLASS)
Total Experience in Years Teaching 21 YEARS
Name of Teaching Staff KRISHAN KUMAR
Designation LECTURER
Department INSTRUMENTATION & CONTROL ENGG.
Date of Joining the Institution 03/07/2018
Qualifications with Class/Grade UG B.E.
Total Experience in Years Teaching 14 YEARS
Industry 1 YEAR
Name of Teaching Staff JAI PARKASH
Designation LECTURER
Department ELECTRONICS & COMM. ENGG.
Date of Joining the Institution 01/08/2013
Qualifications with Class/Grade UG B.E. (ECE)
PG M.TECH (ECE)
PhD PhD (ECE)
Total Experience in Years Teaching 18 YEARS
Paper Published National 01
International 06
Paper Presented in Conferences National 02
Professional Memberships ISTE, IE
PHOTO
PHOTO
PHOTO
PHOTO
Name of Teaching Staff PUNIT KAUSHIK
Designation LECTURER
Department INST. & CONTROL ENGG.
Date of Joining the Institution 5/03/2009
Qualifications with Class/Grade UG B.TECH(INST. & CONT. ENGG.)
PG M.TECH (ECE)
Total Experience in Years Teaching 10 YEARS
Paper Published National 08
International 17
Electronics & Communication Engg. Department
Name of Teaching Staff TEJPAL RAWAT
Designation HOD
Department ELECTRONICS & COMM. ENGG.
Date of Joining the Institution 26/08/2009
Qualifications with Class/Grade UG B.E. ELECTRONICS ENGG. (DISTINCTION)
PG M.E. ELECTRONICS ENGG. (DISTINCTION)
Total Experience in Years Teaching 29 YEARS
Professional Memberships ISTE (Life Member)
Name of Teaching Staff LINCOLN HADDA
Designation SENIOR LECTURER
Department ELECTRONICS & COMM. ENGG.
Date of Joining the Institution 25/11/2013
Qualifications with Class/Grade UG B.TECH.
PG M.TECH
PhD Pursuing
Total Experience in Years Teaching 21 YEARS
Paper Published National 01
International 04
Professional Memberships IEEE
Name of Teaching Staff MANOJ KUMAR
Designation LECTURER
Department ELECTRONICS & COMM. ENGG.
Date of Joining the Institution 03/01/2018
Qualifications with Class/Grade UG B.E. ELEX.
Total Experience in Years Teaching 17 YEARS
----------------------------------------------------------------------------------------------------------------------------------------------------------------
PHOTO
PHOTO
PHOTO
PH OTO
Name of Teaching Staff VIKAS KADIAN
Designation LECTURER
Department ELECTRONICS & COMM. ENGG.
Date of Joining the Institution 01/09/2009
Qualifications with Class/Grade UG B.E. (1ST CLASS)
Total Experience in Years Teaching 10 YEARS
Name of Teaching Staff RAMESH KUMARI
Designation LECTURER
Department ELECTRONICS & COMM. ENGG.
Date of Joining the Institution 01/07/2008
Qualifications with Class/Grade UG B.E. ELECTRONICS (1ST CLASS)
Total Experience in Years Teaching 14 YEARS
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Name of Teaching Staff POOJA SINDHU
Designation LECTURER
Department ELECTRONICS & COMM. ENGG.
Date of Joining the Institution 21/10/2013
Qualifications with Class/Grade UG B.E.
PG M.E. (ECE)
Total Experience in Years Teaching 11 YEARS 06 MONTHS
Paper Published National 01
International 02
Paper Presented in Conferences National 01
Name of Teaching Staff PATANJALI
Designation LECTURER
Department ELECTRONICS & COMM. ENGG.
Date of Joining the Institution 28/08/2009
Qualifications with Class/Grade UG B.E. (ECE)
PG M.TECH (ECE)
Total Experience in Years Teaching 09 YEARS
Electrical Engg. Department
Name of Teaching Staff PRITI GIRDHAR
Designation LECTURER
Department ELECTRICAL ENGG.
Date of Joining the Institution 01/08/2005
Qualifications with Class/Grade UG B.TECH. (ELECTRICAL)
Total Experience in Years Teaching 01 YEAR 09 MONTHS (AS A LECTURER)
Industry 13 YEARS 2 MONTHS (AS AN INSTRUCTOR )
----------------------------------------------------------------------------------------------------------------------------------------------------------------
PHOTO
PHOTO
PHOTO
PHOTO
PHOTO
Name of Teaching Staff RANBIR SINGH
Designation LECTURER
Department ELECTRICAL ENGG.
Date of Joining the Institution 13/07/2007
Qualifications with Class/Grade UG B.E. (ELECTRICAL)
Total Experience in Years Teaching 17 YEARS
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Name of Teaching Staff NARSINGH PARMAR
Designation LECTURER
Department ELECTRICAL ENGG.
Date of Joining the Institution 08/03/2017
Qualifications with Class/Grade UG B.TECH.
PG M.TECH. (ECE)
Total Experience in Years Teaching 09 YEARS 2 MONTHS
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Computer Engg. Department
Name of Teaching Staff DINESH SINGH
Designation SENIOR LECTURER
Department COMPUTER ENGG.
Date of Joining the Institution 02/11/1993
Qualifications with Class/Grade UG B.E. COMPUTER ENGG.(1ST CLASS)
PG M.TECH. COMPUTER ENGG. (1ST CLASS)
PhD Pursuing
Total Experience in Years Teaching 24 YEARS
Industry 03 YEARS
Paper Published National 01
Name of Teaching Staff PANKAJ MALIK
Designation SENIOR LECTURER
Department COMPUTER ENGG.
Date of Joining the Institution 27/07/1998
Qualifications with Class/Grade UG B.Sc. (Non Medical)(2nd CLASS)
B.Ed.(3rd CLASS)
PG MCA (2nd CLASS)
Total Experience in Years Teaching 20 YEARS
Name of Teaching Staff NARESH KUMARI
Designation LECTURER
Department COMPUTER ENGG.
Date of Joining the Institution 17/12/2004
Qualifications with Class/Grade PG MCA (1ST CLASS)
PHOTO
PHOTO
PHOTO
PHOTO
PHOTO
Total Experience in Years Teaching 13 YEARS 9MONTHS
Papers Published National 02
International 02
Papers Presented in Conferences National 02
PhD Guide? Give field & University Field Computer Engg.
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Name of Teaching Staff GARIMA ROHELA
Designation LECTURER
Department COMPUTER ENGG.
Date of Joining the Institution 23/01/2004
Qualifications with Class/Grade PG M.TECH.(COMPUTER SCIENCE & ENGG.)
Total Experience in Years Teaching 14 YEARS 8MONTHS
Name of Teaching Staff VIRENDER SINGH
Designation LECTURER
Department COMPUTER ENGG.
Date of Joining the Institution 09/03/2007
Qualifications with Class/Grade PG MCA
Total Experience in Years Teaching 11 YEARS 6MONTHS
Name of Teaching Staff POONAM DAHIYA
Designation LECTURER
Department COMPUTER ENGG.
Date of Joining the Institution 09/08/2016
Qualifications with Class/Grade PG MCA(1ST DIVISION)
Total Experience in Years Teaching 02 YEARS
8 YEARS OF ADMINISTRATIVE WORK
Chemical Engg. Department
Name of Teaching Staff PARVESH KUMAR
Designation HOD
Department CHEMICAL ENGG.
Date of Joining the Institution 12/12/2003
Qualifications with Class/Grade UG B.TECH. (CHEMICAL ENGG.)(1ST DIVISION)
Total Experience in Years Teaching 14 YEARS 09 MONTHS
Industry 02 YEARS
Name of Teaching Staff JASBIR SINGH
Designation SENIOR LECTURER
Department CHEMICAL ENGG.
Date of Joining the Institution 16/12/2003
Qualifications with Class/Grade UG B.TECH. (CHEMICAL ENGG.)(1ST DIVISION)
Total Experience in Years Teaching 14 YEARS 09 MONTHS
PHOTO
PHOTO
PHOTO
PHOTO
PHOTO
Name of Teaching Staff LATISH CHHABRA
Designation LECTURER
Department CHEMICAL ENGG.
Date of Joining the Institution 17/12/2003
Qualifications with Class/Grade UG B.TECH. (CHEMICAL ENGG.)(1ST DIVISION)
Total Experience in Years Teaching 14 YEARS 09 MONTHS
Industry 01 YEAR
Name of Teaching Staff KULDEEP GULIA
Designation LECTURER
Department CHEMICAL ENGG.
Date of Joining the Institution 26/07/2004
Qualifications with Class/Grade UG B.E. (CHEMICAL ENGG.)
PG M.TECH.(CHEMICAL ENGG.)
Total Experience in Years Teaching 14 YEARS 02MONTHS
Name of Teaching Staff SAMARPAL SINGH
Designation LECTURER
Department CHEMICAL ENGG.
Date of Joining the Institution 05/03/2009
Qualifications with Class/Grade UG B.TECH. (CHEMICAL ENGG.)(1ST DIVISION)
Total Experience in Years Teaching 09 YEARS 06MONTHS
Industry 02 YEARS
Mechanical Engg. Department
Name of Teaching Staff SHIVENDER DAHIYA
Designation LECTURER
Department MECHANICAL ENGG.
Date of Joining the Institution 22/03/1998
Qualifications with Class/Grade UG B.E. (1ST DIVISION)
PG M.TECH.(1ST DIVISION)
Total Experience in Years Teaching 20 YEARS
PhDs/Projects Guided Wire cut EDM of Ceramics materials
Name of Teaching Staff HARISH KUMAR
Designation LECTURER
Department MECHANICAL ENGG.
Date of Joining the Institution 24/07/1995
Qualifications with Class/Grade UG B.E. (MECH. ENGG.)
PG MBA(H.R.M.)
Total Experience in Years Teaching 23 YEARS
Industry 08 YEARS
PHOTO
PHOTO
PHOTO
PHOTO
PHOTO
Name of Teaching Staff SARTAJ SINGH
Designation LECTURER
Department MECHANICAL ENGG.
Date of Joining the Institution 03/03/2009
Qualifications with Class/Grade UG B.E. (MECH. ENGG.)(1ST CLASS)
Total Experience in Years Teaching 09 YEARS
Name of Teaching Staff HARSH CHAUDHARY
Designation LECTURER
Department MECHANICAL ENGG.
Date of Joining the Institution 26/07/2004
Qualifications with Class/Grade UG B.E. (MECH. ENGG.)
Total Experience in Years Teaching 14 YEARS
Name of Teaching Staff VIPIN KUMAR
Designation LECTURER
Department MECHANICAL ENGG.
Date of Joining the Institution 03/03/2009
Qualifications with Class/Grade UG B.TECH.
PG M.TECH.
Total Experience in Years Teaching 09 YEARS & 06 MONTHS
Papers Presented in Conferences National 01
PhDs/Projects Guided Projects at Parametric optimization of carburetor
Masters level casting by using taguchi method
Name of Teaching Staff RAJESH KUMAR
Designation LECTURER
Department MECHANICAL ENGG.
Date of Joining the Institution 23/01/2007
Qualifications with Class/Grade UG B.TECH.(1ST DIVISION)
Total Experience in Years Teaching 11 YEARS
Industry 16 YEARS
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Name of Teaching Staff BALJIT SINGH
Designation LECTURER
Department MECHANICAL ENGG.
Date of Joining the Institution 26/07/2004
Qualifications with Class/Grade UG B.E.
PG M.E.(MANUFACTURING TECHNOLOGY)
Total Experience in Years Teaching 14 YEARS
Industry 02 YEARS
PHOTO
PHOTO
PHOTO
PHOTO
PHOTO
Papers Published National 02
Papers Presented in Conferences National 02
Name of Teaching Staff RAMESH KUMAR
Designation LECTURER
Department MECHANICAL ENGG.
Date of Joining the Institution 16/07/2008
Qualifications with Class/Grade UG B.E.(MECH. ENGG.) 1ST CLASS
PG M.E.(INDUSTRIAL ENGG.) 1ST CLASS
Total Experience in Years Teaching 18 YEARS
Industry 01 YEAR
Papers Published National 02
----------------------------------------------------------------------------------------------------------------------------------------------------------------
Finance, Account & Auditing Department
Name of Teaching Staff MAHIPAL SINGH CHOUDHARY
Designation LECTURER
Department OMCA
Date of Joining the Institution 22/08/2014
Qualifications with Class/Grade PG MBA
Total Experience in Years Teaching 21 YEARS & 06 MONTHS
Name of Teaching Staff RAVINDER DAHIYA
Designation LECTURER
Department FINANCE, ACCOUNT & AUDITING
Date of Joining the Institution 03/03/1997
Qualifications with Class/Grade UG B.COM (2ND DIVISION)
B.Ed. (2ND DIVISION)
PG M.COM. (2ND DIVISION)
MBA(FINANCE)(2ND DIVISION)
PhD PhD
Total Experience in Years Teaching 21 YEARS 06 MONTHS
Research ONLINE MARKETING & ADVERTISING AS AN
EFFECTIVE TOOL OF IMC
Papers Published National 02
PhD Guide? Give field & University Field DR. HARIOM, ASSOCIATE PROFESSOR
DEPTT. OF COM. & MANAGEMENT
University OPJS UNIVERSITY, CHURU, RAJASTHAN
----------------------------------------------------------------------------------------------------------------------------------------------------------------
PHOTO
PHOTO
PHOTO
Applied Science Department
Name of Teaching Staff DR. R.S. CHAUHAN
Designation SENIOR LECTURER
Department APPLIED SCIENCE
Date of Joining the Institution 02/11/2006
Qualifications with Class/Grade UG B.SC.
PG M.SC., M.PHIL.
PhD PhD IN CHEMISTRY
Total Experience in Years Teaching MORE THAN 23 YEARS
Research 2 YEARS AFTER PhD AS POST DOCTORATE FELLOW
EFFECTIVE TOOL OF IMC
Papers Published National 02
International 11
Name of Teaching Staff PUSHPA RANI
Designation SENIOR LECTURER
Department APPLIED SCIENCE
Date of Joining the Institution 10/03/1997
Qualifications with Class/Grade PG M.A.(ENGLISH)
Total Experience in Years Teaching 21 YEARS
Name of Teaching Staff KIRAN
Designation LECTURER
Department APPLIED SCIENCE
Date of Joining the Institution 22/05/2000
Qualifications with Class/Grade UG B.A.
PG M.A.(MATHS)
Total Experience in Years Teaching 18 YEARS 4 MONTHS
Name of Teaching Staff POONAM
Designation LECTURER
Department APPLIED SCIENCE
Date of Joining the Institution 01/02/2013
Qualifications with Class/Grade UG B.A.(MATHS) 1ST DIVISION
PG M.A.(MATHS) 1ST DIVISION
M.PHIL.(EDUCATION) 1ST DIVISION
Total Experience in Years Teaching 9YEARS 6 MONTHS
Name of Teaching Staff JYOTI DALAL
Designation LECTURER
Department APPLIED SCIENCE
Date of Joining the Institution 04/03/2009
Qualifications with Class/Grade UG B.Sc. 1ST CLASS
PHOTO
PHOTO
PHOTO
PHOTO
PHOTO
PG M.Sc.(PHYSICS) 1ST CLASS
M.PHIL.(PHYSICS) 1ST CLASS
Total Experience in Years Teaching 11 YEARS 6MONTHS
Name of Teaching Staff ANJU RANI
Designation LECTURER
Department APPLIED SCIENCE
Date of Joining the Institution 02/04/2010
Qualifications with Class/Grade UG B.A.(WITH MATHS) 1ST CLASS
PG M.SC.(MATHS) 1ST CLASS
M.PHIL.(MATHS) 1ST CLASS
Total Experience in Years Teaching 9YEARS 6 MONTHS
Name of Teaching Staff KAMLESH
Designation LECTURER
Department APPLIED SCIENCE
Date of Joining the Institution 03/03/2009
Qualifications with Class/Grade UG B.A.
PG M.A.(ENGLISH)
Total Experience in Years Teaching 09YEARS 6MONTHS
----------------------------------------------------------------------------------------------------------------------------------------------------------------
---
Name of Teaching Staff SWEETY CHHIKARA
Designation LECTURER
Department APPLIED SCIENCE
Date of Joining the Institution 03/03/2009
Qualifications with Class/Grade UG B.Sc. 1st Division
PG M.Sc.(Physics) 1st Division
Total Experience in Years Teaching 09YEARS 6MONTHS
----------------------------------------------------------------------------------------------------------------------------------------------------------------
--
Name of Teaching Staff BIRENDER SINGH
Designation LECTURER
Department APPLIED SCIENCE
Date of Joining the Institution 08/05/2000
Qualifications with Class/Grade PG M.Sc.
Total Experience in Years Teaching 18YEARS
PHOTO
PHOTO
PHOTO
PHOTO
9. Fee
• Details of fee, as approved by State Fee Committee, for the Institution
Fee(per annum) : Tuition Fee* : 3000/-
Development charges : 1500/-
Student Fund : 1200/-
* No Tuition fee for girl students • Time schedule for payment of fee for the entire programme
Within one month after the start of the session
• No. of Fee waivers granted with amount and name of students
Sr. No. Name Amount
1 VIJAY Rs. 3000/- per annum
2 ANKIT RAJ SINGH
Rs. 3000/- per annum
3 RAVI ROHILLA Rs. 3000/- per annum
4 DEEPANSHU Rs. 3000/- per annum
5 HARENDER Rs. 3000/- per annum
6 HIMANSHU Rs. 3000/- per annum
7 ANKUSH Rs. 3000/- per annum
8 DEEPAK KUMAR Rs. 3000/- per annum
9 HARSH MADAAN Rs. 3000/- per annum
10 HITESH Rs. 3000/- per annum
11 ROHAN KUMAR Rs. 3000/- per annum
12 SACHIN Rs. 3000/- per annum
13 LALIT Rs. 3000/- per annum
14 NIKHIL Rs. 3000/- per annum
15 PAWAN KUMAR Rs. 3000/- per annum
16 ROHIT Rs. 3000/- per annum
17 PHOOL KUMAR Rs. 3000/- per annum
18 ARYAN Rs. 3000/- per annum
19 DEEPAK Rs. 3000/- per annum
20 JATIN SHARMA Rs. 3000/- per annum
21 MANISH Rs. 3000/- per annum
22 SACHIN Rs. 3000/- per annum
23 AKASH Rs. 3000/- per annum
24 UJJWAL KAUSHIK Rs. 3000/- per annum
25 AJAY KUMAR Rs. 3000/- per annum
26 BHARAT SHARMA Rs. 3000/- per annum
27 MOHIT SHARMA Rs. 3000/- per annum
28 RINKU Rs. 3000/- per annum
29 SACHIN Rs. 3000/- per annum
30 SAHIL Rs. 3000/- per annum
31 SHIVAM Rs. 3000/- per annum
• Number of scholarship offered by the Institution, duration and amount
1. Merit-cum-Means Scholarship
For six months in every semester after declaration of result
Rs. 500/- per month for 15% students of sanctioned intake
• Criteria for fee waiver/scholarship
Under Tuition Fee Waiver (TFW) Scheme of AICTE, seats up to maximum 5 percent of
sanctioned intake per course shall be available in all institutions approved by AICTE. These
seats shall be supernumerary in nature and will be available to such courses in an Institute where a minimum of 30% of sanctioned seats in the respective courses are filled up.
A candidate applying for TFW category must submit the following certificates at the time of verification at the selected Designated Center:
i. Attested copy of Income Certificate of the parents from all sources from the organization
where parents are working or Affidavit of Income on stamp paper from Notary (Annual income of Parents/ Guardians should be less than Rs. 6.00 lakh from all sources)
ii. Haryana Resident Certificate (in case candidate has not passed/appeared in the qualifying examination from Haryana
iii. Attested copy of Mark Sheet of Qualifying Examination
iv. Proof of deposit of Application Fee
• Estimated cost of Boarding and Lodging in Hostel
Rs. 1560/- per semster
10. Admission
• Number of seats sanctioned with the year of approval
Name of the Department : Automobile Engg.
Year of approval : 2007
Number of seats sanctioned : 120
Name of the Department : CHEMICAL ENGG.
Year of approval : 1989
Number of seats sanctioned : 60
Name of the Department : COMPUTER ENGG.
Year of approval : 2004
Number of seats sanctioned : 60
Name of the Department : ELECTRICAL ENGG.
Year of approval : 2007
Number of seats sanctioned : 60
Name of the Department : ELECTRONICS & COMM. ENGG.
Year of approval by the Council : 2006
Number of seats sanctioned : 60
Name of the Department : INSTRUMENTATION & CONTROL ENGG.
Year of approval by the Council : 1995
Number of seats sanctioned : 60
Name of the Department : FINANCE, ACCOUNT & AUDITING
Year of approval : 2008
Number of seats sanctioned : 60
Name of the Department : MECHANICAL ENGG.
Year of approval : 2004
Number of seats sanctioned : 120
• Number of students admitted under various categories each year in last three years
CATEGORY WISE STUDENT DETAIL OF Diploma(Engg.)-2017
Sr. no.
Branch AIC BC HOGC SC TFW TOTAL
MALE TOTAL
FEMALE TOTAL
M F M F M F M F M F
1 AUTOMOBILE 23 37 44 14 1 119 0 119
2 CHEMICAL 4 19 25 12 2 62 0 62
3 COMPUTER 10 1 13 1 23 4 5 1 51 7 58
4 ELECTRICAL 10 2 15 16 2 12 1 3 56 5 61
5 ELECTRONICS 5 18 1 18 1 7 1 48 3 51
6 FAA 1 1 1 1 2
7 INSTRUMENTATION 4 8 9 3 24 0 24
8 MECHANICAL 12 1 40 46 19 2 6 123 3 126
TOTAL 68 4 150 2 182 7 72 6 12 0 484 19 503
CATEGORY WISE STUDENT DETAIL OF DET-2016
Sr. no.
Branch AIC BC EBP HOGC
HOGC ESM PH SC TFW TOTAL
MALE TOTAL
FEMALE TOTAL
M F M F M F M F M M F M F M F
1 AUTOMOBILE 20 1 29 36 21 106 1 107
2 CHEMICAL 5 2 18 1 19 1 9 52 3 55
3 COMPUTER 4 1 14 7 15 7 8 1 41 16 57
4 ELECTRICAL 7 0 19 1 1 16 12 55 1 56
5 ELECTRONICS 5 0 21 17 11 54 0 54
6 FAA 3 1 4 1 11 5 23 2 25
7 INSTRUMENTATION 15 1 12 18 6 51 1 52
8 MECHANICAL 7 2 39 3 3 26 4 1 1 1 19 1 4 100 11 111
TOTAL 66 8 156 12 5 0 158 12 1 1 1 91 1 4 1 482 35 517
CATEGORY WISE STUDENT DETAIL OF DET-2018
Sr. no.
Branch
AIC BC EBP HOGC SC TFW TOTAL
MALE
TOTAL
FEMALE
TOTAL
M F M F M F M F M F M F
1 AUTOMOBILE 24
30 1 51 14 119 1 120
2 CHEMICAL 6 21 19 14 1 61 0 61
3 COMPUTER 9 4 10 3 14 9 9 2 1 43 18 61
4 ELECTRICAL 8 15 24 1 12 3 62 1 63
5 ELECTRONICS 18
15 22 1 4 1 1 60 2 62
6 FAA 9 2 5 2 30 5 4 3 48 12 60
7 INSTRUMENTATION
14
7 7 3 2 30 3 33
8 MECHANICAL 17
1 40 36 1 24 1 6 123 3 126
TOTAL 105
7 14
3 6 0 0 203 20 83 7 12 0 546 40 586
• Number of applications received during last two years for admission under Management
Quota and number admitted
NOT APPLICABLE
11. Admission Procedure
• Mention the admission test being followed, name and address of the Test Agency and its
URL(website)
Admission in Diploma Engg. Course is made on the basis of merit of Secondary School
Examination (Matriculation) or equivalent qualifying examination.
Inter-se-Merit/ Rank of Qualifying Examination: Each eligible candidate who has submitted and got his/ her Online Application Form Verified & Confirmed by the selected Designated Center upto the last date of Verification & Confirmation of Online Application Form for admission to Diploma Engg. will be assigned Inter-se-Merit/ Rank based on the following criterion: I. Percentage of Aggregate Marks obtained at Secondary School Examination - SSC (Matriculation) or equivalent qualifying examination shall be the basis for the purpose of determining the Inter-se-Merit.
II. Rounding off of the marks secured by the candidate will be done upto four decimal places in individual subject and grand total while converting marks of the individual subject out of 100 and calculating percentage of Aggregate Marks. III. For calculating the percentage of subject wise and Aggregate Marks, the marks of individual subject and Grand Total given by the respective School Board will be considered. In case, subject wise and Aggregate Marks are not mentioned by the concerned Board then GPA and CGPA awarded by the Board will be considered for calculating the percentage of subject wise and Aggregate Marks according to the Conversion Factor mentioned in Mark Sheet. If, the Conversion Factor is not mentioned in Mark Sheet, the candidate shall submit proof of subject wise and Aggregate Marks issued by the concerned Board upto the last date prescribed for the Verification/ Confirmation of Online Filled Application Form.
IV. In case, where the aggregate marks or the CGPA is not mentioned by the concerned Board in the DMC of Qualifying Examination (Matriculation), then total marks of all the subjects should be considered for calculating percentage of aggregate marks of Qualifying Examination. IV. In case, Mark Sheet issued by any School Education Board is in a Language other than English and Hindi, candidate shall submit copy of transcript of Mark Sheet issued by the concerned Board in English or Hindi. Tie-Breaking Criteria: In case of a tie i.e. when two or more candidates obtain equal
Aggregate Marks at SSC (Matriculation) or equivalent qualifying examination as mentioned in Point No. 1, Inter-se-Merit of such candidates shall be decided in the following order: I. Resolution by marks obtained in Mathematics in Qualifying Examination. Candidate obtaining higher marks will be given better rank.
II. Resolution by marks obtained in Science in Qualifying Examination. Candidate obtaining higher marks will be given better rank.
III. Resolution by marks obtained in English in Qualifying Examination. Candidate obtaining higher marks will be given better rank.
IV. Resolution by Date of Birth of candidate. Elder candidate will be given better rank.
V. Resolution by name of the candidate (in English as per matriculation mark sheet) in alphabetical order i.e. candidate whose name appears first will be given better rank. VI. Resolution by father‟s name of the candidate (in English as per matriculation mark sheet) in alphabetical order i.e. candidate whose father‟s name appears first will be given better rank.
VII. Resolution by mother‟s name of the candidate (in English as per matriculation mark sheet) in alphabetical order i.e. candidate whose mother‟s name appears first will be given better rank.
• Number of seats allotted to different Test Qualified candidate separately (AIEEE/CET (State
conduced Test/University Tests/CMAT/GPAT)/Association conducted test)
NOT APPLICABLE
• Calendar for admission against Management/vacant seats:
• Last date of request for applications 15th August
• Last date of submission of applications 15th August
• Dates for announcing final results 15th August
• Release of admission list (main list and waiting list shall be announced on the same day)
• Date for acceptance by the candidate (time given shall in no case be less than 15 days)
• Last date for closing of admission 15th August
• Starting of the Academic session 1st August
• The waiting list shall be activated only on the expiry of date of main list NOT Applicable
• The policy of refund of the fee, in case of withdrawal, shall be clearly notified
Refund of Semester/ Admission Fee collected by the Institutes to the Candidate: In the event of a student withdrawing before the starting of the course, the entire fee collected from the
student, after a deduction of the processing fee of not more than Rs.1000/- (Rupees one thousand only) shall be refunded by the institutions. It would not be permissible for Institutions to retain the School/
Institutions Leaving certificates in original. In case, if a student leaves after joining the course and if the vacated seat is consequently filled by another student by the last date of admission, the Institutions must
refund the fee collected after a deduction of the processing fee of not more than Rs.1000/- (Rupees one
thousand only) and proportionate deductions of monthly fee and hostel rent, where applicable. The last date for withdrawal of PGDM admission for the purpose of refund of fees shall be 30th June of every year. In case
the vacated seat is not filled, the institution should refund the security deposit and return the original documents. Institutions should not demand fee for the subsequent years from the students cancelling their
admission at any point of the time. Fee refund along with the return of Certificates should be completed
within 7 days. Institutions not following guidelines issued by the council regarding refund of fee on cancellation of
admission or delaying refunds shall be liable to any one or more of the following punitive actions by the Council.
• Fine for non-compliance or refund rules of fee levied against each case shall be five times the total fee collected per student.
• Suspension of approval for supernumerary seats, if any, for one Academic year.
• Reduction in “Approved Intake”. • No admission in one/ more Course(s) for one Academic year • Withdrawal of approval for Programme(s)/ Course(s)
12. Criteria and Weightages for Admission
• Describe each criterian with its respective weightages i.e. Admission Test, marks in qualifying examination etc. Admission in Diploma Engg. Course shall be made on the basis of merit of Secondary School Examination
(Matriculation) or equivalent qualifying examination.
DIPLOMA ENGG. [Three Years Duration - Semester Based Course]
Eligibility Passed 10th Std/ SSC Examination.
Obtained at least 35% marks (33% in case of candidates belonging to Scheduled Castes and Scheduled Tribes category or Kashmiri Migrants Category) at the qualifying examination.
Compulsory pass in Maths and Science subjects in the qualifying examination.
Inter-se-Merit/ Rank of Qualifying Examination: Each eligible candidate who has submitted and got
his/ her Online Application Form Verified & Confirmed by the selected Designated Center upto the last date of Verification & Confirmation of Online Application Form for admission to Diploma Engg. will be assigned
Inter-se-Merit/ Rank based on the following criterion:
I. Percentage of Aggregate Marks obtained at Secondary School Examination - SSC (Matriculation) or
equivalent qualifying examination shall be the basis for the purpose of determining the Inter-se-Merit. II. Rounding off of the marks secured by the candidate will be done upto four decimal places in individual
subject and grand total while converting marks of the individual subject out of 100 and calculating percentage of Aggregate Marks.
III. For calculating the percentage of subject wise and Aggregate Marks, the marks of individual subject and
Grand Total given by the respective School Board will be considered. In case, subject wise and Aggregate Marks are not mentioned by the concerned Board then GPA and CGPA awarded by the Board will be
considered for calculating the percentage of subject wise and Aggregate Marks according to the Conversion Factor mentioned in Mark Sheet. If, the Conversion Factor is not mentioned in Mark Sheet, the candidate
shall submit proof of subject wise and Aggregate Marks issued by the concerned Board upto the last date prescribed for the Verification/ Confirmation of Online Filled Application Form.
IV. In case, where the aggregate marks or the CGPA is not mentioned by the concerned Board in the DMC of Qualifying Examination (Matriculation), then total marks of all the subjects should be considered for
calculating percentage of aggregate marks of Qualifying Examination. IV. In case, Mark Sheet issued by any School Education Board is in a Language other than English and Hindi,
candidate shall submit copy of transcript of Mark Sheet issued by the concerned Board in English or Hindi.
Tie-Breaking Criteria: In case of a tie i.e. when two or more candidates obtain equal Aggregate Marks at SSC (Matriculation) or equivalent qualifying examination as mentioned in Point No. 1, Inter-se-Merit of
such candidates shall be decided in the following order: I. Resolution by marks obtained in Mathematics in Qualifying Examination. Candidate obtaining higher marks will be given better rank.
II. Resolution by marks obtained in Science in Qualifying Examination. Candidate obtaining higher marks will be given better rank.
III. Resolution by marks obtained in English in Qualifying Examination. Candidate obtaining higher marks will be given better rank.
IV. Resolution by Date of Birth of candidate. Elder candidate will be given better rank.
V. Resolution by name of the candidate (in English as per matriculation mark sheet) in alphabetical order i.e.
candidate whose name appears first will be given better rank. VI. Resolution by father‟s name of the candidate (in English as per matriculation mark sheet) in alphabetical order i.e. candidate whose father‟s name appears first will be given better rank.
VII. Resolution by mother‟s name of the candidate (in English as per matriculation mark sheet) in
alphabetical order i.e. candidate whose mother‟s name appears first will be given better rank.
ADMISSION IN DIPLOMA ENGG. – LATERAL ENTRY [Two Years Duration - Semester Based Course] Eligibility
All those candidates who have passed ITI of at least two years duration (after 10th), 10+2 (vocational), 10+2 with Phyisics, Chemistry and Math (PCM) or 12th class passed with NSQF level 4 will be eligible for
consideration in various Diploma Engineering courses on the basis of merit/ rank obtained in DET (L) only and as per the compatibility of the courses.
Note: The candidates who have passed ITI of at least two years duration (after 10th) or 10+2 with Phyisics,
Chemistry and Math (PCM) will be eligible for consideration in all streams of Diploma Engg.
The candidates who have passed 10+2 (Arts/ Commerce) will be eligible for consideration in Non-
Engineering Diploma Courses (Diploma in Business Management, Industrial & Personal Management, Hotel
Management, Finance, Accounts & Auditing, Library & Information Science and Office Management & Computer Application) only.
Candidates who have passed 10+2 (Medical) will be eligible for consideration in Diploma in Medical Laboratory Technology only.
The candidates who have passed 12th class with NSQF level 4 or 10+2 (Vocational) will be eligible as per
the compatibility of the course.
Candidates who have completed Three year diploma in particular branch would be eligible to take admission
in 2nd year of a different branch through lateral entry.
Basis of Admissions
Admission of the candidates to the Diploma level courses under the lateral entry scheme will be made on the
basis of inter-se-merit/rank of On-Line Lateral Entry Diploma Entrance Test i.e. DET (L)
For candidates obtaining equal marks in DET (L)- merits, the candidate with higher marks in Math will be placed at higher Rank. If the candidate has same marks in Math, the candidate having higher marks in
science will be placed at higher Rank. For the candidate having same marks in Math and Science, the candidate having higher marks in English will be placed at higher Rank. For the candidate having same
marks in Math, Science and English the candidate having high marks in General Awareness and Aptitude will
be placed at higher rank. For candidate having same marks in Math, Science, English and General Awareness and Aptitude, senior in age will be placed at higher Rank.
• Mention the minimum level of acceptance, if any Passed 10th Std/ SSC Examination for Diploma 1st year admission.
Obtained at least 35% marks (33% in case of candidates belonging to Scheduled Castes and Scheduled Tribes category or Kashmiri Migrants Category) at the qualifying examination. Compulsory pass in Maths and Science subjects in the qualifying examination. Passed 10+2 with PCM/ITI(2years)/10+2(Vocational)/NSQF Level4 for Lateral Entry in Diploma 2nd year.
• Mention the cut-off levels of percentage and percentile score of the candidates in the admission test for the last three years (as mentioned at point no. 6)
• Display marks scored in Test etc. and in aggregate for all candidates who were admitted List NOT APPLICABLE 13 List of Applicants
• List of candidate whose applications have been received along with percentile/percentage score for each of the qualifying examination in separate categories for open seats. List of candidate who have applied along with percentage and percentile score for Management quota seats NOT APPLICABLE 14. Results of Admission Under Management seats
• Composition of selection team for admission under Management Quota with the brief profile of members (This information be made available in the public domain after the admission process is over) NOT APPLICABLE
• Score of the individual candidate admitted arranged in order or merit NOT APPLICABLE
• List of candidate who have been offered admission NOT APPLICABLE
• Waiting list of the candidate in order of merit to be operative from the last date of joining of the first list candidate NOT APPLICABLE
• List of the candidate who joined within the date, vacancy position in each category before operation of waiting list NOT APPLICABLE
15. Information of Infrastructure and Other Resource Available
• Number of Class Rooms and size of each
• Number of Tutorial rooms and size of each
Room No. Type Size
A212 Tutorial Room 92.25
A213 Tutorial Room 95.13
Room No. Type Size
A108 Classroom 58.52
A111 Classroom 87
A119 Classroom 124
A120 Classroom 124
A201 Classroom 62.49
A203 Classroom 62.49
A219 Classroom 128.34
A220 Classroom 128.34
B004 Classroom 91
B005 Classroom 95.75
B013 Classroom 95.75
B111 Classroom 96.12
B211 Classroom 91.66
C011 Classroom 90.25
C102 Classroom 65.37
C103 Classroom 65.03
D103 Classroom 56.02
D104 Classroom 34.36
D105 Classroom 58.64
E103 Classroom 49.9
E104 Classroom 49.9
• Number of Laboratories and size of each
Room No. Type Size
A112 ADVANCE COMM. LAB Laboratory 92
A113 COMM. LAB Laboratory 86
A114 CONTROL ENGG. LAB Laboratory 86
A118 TRANSDUCER LAB Laboratory 126
A202(ECE W/S) Laboratory 62.49
A208(PHYSICS LAB-II) Laboratory 62.49
A214(CHEMISTRY LAB-I) Laboratory 92.25
A217 (PHYSICS LAB-I) Laboratory 63.42
A218(CHEMISTRY LAB-II) Laboratory 92.25
B001 AUTO ENGG. LAB Laboratory 97
B002 CBT LAB Laboratory 40.28
B201 H/W IT LAB Additional Workshop 99.32
B202 COMPUTER LAB (FAA) Laboratory 57.11
B204 S/W LAB III Laboratory 81
C002 IQC LAB Laboratory 3701
C003AUTO. LAB Additional Workshop 45.46
C004 RAC LAB Laboratory 47.7
C010 MM LAB Laboratory 41.13
C012 THERMAL ENGG. LAB Laboratory 49.04
C107 CAD LAB Laboratory 63.92
D001 CNC LAB Laboratory 73.8
D002 ELECTRICAL M/C LAB Additional Workshop 36
D003 ELECTRONICS LAB Laboratory 72
D004 FEE LAB Laboratory 95
D005 ELECTRICAL W/S Laboratory 57
E003 MO LAB Additional Workshop 54.81
E004 HT & MT LAB Laboratory 256.01
E005 FF LAB Laboratory 84
E102 PPT, CT & PCCPI Laboratory 184.4
• Number of Drawing Halls with capacity of each
Room No. Type Size Capacity
C105+C106 Drawing Hall 97.5 60
D102 Drawing Hall 111.03 60
E101 Drawing Hall 130.83 60
LX+LY Drawing Hall 256.4 120
Number of Computer Centres with capacity of each
Room No. Type Size Capacity
B101
S/W LAB I COMPUTER
CENTRE 100.15
30
B104
S/W LAB II COMPUTER
CENTRE 94.77
30
• Central Examination Facility YES
• Number of rooms 18
• capacity of each 54
• Barrier Free Built Environment for disabled and elderly persons YES
Occupancy Certificate
• Hostel Facilities
Three Hostels are available in the Institution.
One for Girls
Two Hostels for Boys
Purified Water Coolers are available in Hostel premises
Mess is available for providing food facility to the hosteller students.
LED TVs, Music System are also available for entertainment of students.
Various indoor and outdoor sports facilities are available in the hostels.
Gymansium is also available in Boys Hostel.
Boys Hostel
Gymansium
Girls Hostel Library
• Number of Library books available 53254
• Number of Titles available 15063
• List of online National/ International Journals subscribed
1 Chemical Engineering & Processing: Process Intensification
2 South African Journal of Chemical Engineering
3 Climate Services
4 ELK ASIA PACIFIC JOURNAL OF COMPUTER SCIENCE AND INFORMATION SYSTEM
5 Future Generation Computer Systems
6 ELK ASIA PACIFIC JOURNAL OF ELECTRONICS AND COMMUNICATION TECHNOLOGY
7 Case Studies in Mechanical Systems and Signal Processing
8 IFSC Journal of Systems and Control
9 ELK ASIA PACIFIC JOURNAL OF MARKETING & RETAIL MANAGEMENT
10 ELK ASIA PACIFIC JOURNAL OF FINANCE AND RISK MANAGEMENT
11 ELK ASIA PACIFIC JOURNAL OF HUMAN RESOURCE MANAGEMENT AND ORGANISATIONAL BEHAVIOUR
12 International Journal of Automotive Engineering
13 International Journal of Automotive Engineering and Technology
14 AIMS Electronics and Electrical Engineering
15 Journal of Modern Power System Clean Energy
16 India foundation Journal
17 ELK ASIA PACIFIC JOURNAL OF MECHANICAL ENGINEERING RESEARCH
18 ELK ASIA PACIFIC JOURNAL OF CIVIL ENGINEERING AND STRUCTURAL DEVELOPMENT
19 ELK ASIA PACIFIC JOURNAL OF PROJECT MANAGEMENT AND CONTROL
20 ELK ASIA PACIFIC JOURNAL OF MANUFACTURING, INDUSTRIAL AND PRODUCTION ENGINEERING
21 AIMS Big Data and Information Analysis 1-3
22 Mathematics in Engineering
23 AIMS Environmental Science
24 AIMS Materials Science
• E- Library facilities Available
Laboratory and Workshop
• List of Major Equipment/Facilities in each Laboratory/ Workshop
Sr. No.
Name of Laboratory/workshop
Name of Major Equipment/Facilities
1
PHYSICS LAB-I
SIMPLE PENDULUM
2 CANTILEUER BEAM WITH HOOK
3 VERNIER CALLIPER
4 RHEOSTAT
5 VOLTMETER
6 AMMETER
7 GALVANOMETER
8 RESISTANCE BOX
9 MIRROR STRIPS
10 RESISTANCE COIL
11 CAPACITORS
12 OHM'S LAW APP.
BATTERY ELIMINATOR
13 RESISTANCES
14 DIODE
1
CHEMISTERY LAB-II
ABEL'S FLASH POINT APPARATUS
2 RED WOOD VISCO METER
3 DIGITAL PH-METER
4 MUFFLE FURNACE
5 HOT AIR OVEN
1
Language Lab
COMPUTERS
2 UPS SYSTEM
3 HEAD PHONES
4 CLARITY DIGITAL COMM. ENHANCEMENT SKILL SOFTWARE CD'S
1
CHEMISTRY LAB
MUFFLE FURNACE
2 HOT AIR OVEN
3 HOT PLATE
4 REDWOOD VISCOMETER
5 ABLE'S FLASH POINT APPARATUS
6 CHEMICAL ANALYTICAL BALANCE
1 OH LAB
1)TOOL BOX
2) ENGINE
3) PISTON RING EXPANDER
4) PISTON RING COMPRESSOR
5) CYLINDER HEAD GRINDER
6) CYLINDER BORING MACHINE
7) PULLER
8) CONNECTING ROD ALIGNER
9) GEAR BOX
10) DIFFERENTIAL
11) PROPELLER SHAFT
12) WHEEL AXLE
13) BRAKE ASSEMBLY
14) CLUTCH ASSRMBLY
15) VALVE REFFACING MACHINE
2 AE -LAB
1) FUEL FEED SYSTEM MODEL OF PETROL ENGINE
2) FUEL FEED SYSTEM MODEL OF DIESEL ENGINE
3) MODEL OF ONE CYLINDER 2S& 4S PETROL ENGINE (HAND OPRATED)
4) MODEL OF ONE CYLINDER 2S& 4S DIESEL ENGINE (HAND OPRATED)
5) FUEL INJECTORS
6) SECTION ENGINE MODEL WITH ALL PART SEEN WHEN OPERATED MANUALY
7) MODEL OF TURBOCHARGER
8) M.P.F.I. ENGINE IN WORKING FORM WITH COOLING SYSTEM ,LUBRICATION SYSTEM & WITH FUEL TANK WITH BATTRY CHARGING THROUGH ALTERNATOR , WITH SELF & WITH DISPLAY OF TEMPRATURE ETC.
3 CBT-LAB 1) GENERAL TOOLS
2)CASTOR CAMBER GAUGE
3) TOE GAUGE
4) RIVETING MACHINE
5) MANUAL WHEEL BALANCE
6) BODY REPAIR TOOLS
7) AUTOMATIC TYRE CHANGER
8) COMPUTERISED WHEEL BALNCING MACHINE
4 FDT LAB
1) BATTERY
2) HYDROMETER
3) MULTIMETER
4) IGNITION TIMING LIGHT
5) ALTERNATOR
6) STARTER MOTOR
7) BATTERY IGNITION SYSTEM
8) DIAL BORE GAUGE
9) MICROMETER
10) VERNIER CALLIPER
11) FEELER GAUGE
12) BATTERY CHARGER
1
Pollution Control in Chemical Industries
High Volume Sampler
2 Stack Sample of Stack Velocity sampler
3 BOD Incubator
4 Digital PH meter
5 Turbidity Meter
6 Oven
7 Heating Mantle
8 Weighing Balance
1 Chemical
Technology Lab
Pentrometer Number Measurement (Apparatus) Pentro Meter)
2 Muffle Furnace
3 Oven
4 Digital Refractrometer
5 Weighing Balance (Digital)
6 Constant Temperature Water Bath
7 Hot Plate
1
Mass Transfer
Lab
Diffusion Apparatus For Liquid
2 Diffusion Apparatus for solid
3 Wetted Wall Column Apparatus
4 Packed Bed Absorption Tower
5 Humidification column
6 Tray drier
7 Bubble cap distillation column.
8 Crystallizer
9 Refrectrometer
10 Cooling Tower
11 Extraction Apparatus for Solid - Liquid
12 Extraction Apparatus for Liquid - Liquid
13 Batch Distillation Column
14 Reverse Osmosis set up
15 Weighing Balance
1
Petroleum & Petro-chemical
Lab
Flash & Fire point
2 Smoke Point
3 RED Wood Viscometer
4 Cloud & Pour Point
5 Bomb Calorimeter
6 Softening Point Measuring Apparatus
7 ASTM Distillationv Apparatus
8 Electric Oven
9 Pentrometer
1
Mechanical Operation
Lab
Sieve Shaker
2 Ball Mill
3 Roll Crusher
4 Filter Press
5 Rotary Vacuum Filter
6 Cyclone Seprator
7 Liquid Liquid Mixing
8 Solid Liquid Mixing
9 Sedimentation Tank
1
Heat Transfer
Lab
Double Pipe Heat Exchanger Apparatus 2 Shell & tube Heat-exchanger Apparatus 3 Open-pan evoporator Apparatus 4 Natural Convection Apparatus 5 Forced Convection Apparatus
6 Thermal Conductivity of Metal Rod
Apparatus 7 Stefan balzman Apparatus 8 Emissivity Measuremnt Apparatus 9 Dropwise & filmwise Apparatus
10 Finned tube Heat-exchanger
11 Thermal Conductivity of insulating powder
apparatus 12 Cooling Tower Apparatus 13 Single effect Evoporator
14 Heat-transfer through composite wall
apparatus
1
Fluid Flow Lab
Venturimeter, Orificemeter & Rotameter set up
2 Bernoullis theorm appts, friction losses appratus withV-notch
setup
3 Setup for Reynolds Number Calibration
4 Fluidised bed set up
5 cut section model of centrifugal pump
6 Cut section model for reciprocating pump
7 Cut section model for diaphragm pump
8 cut section Model for blower
9 Cut section Model for compressor
1
Pro
cess
Inst
rum
enta
tio
n &
Co
ntr
ol L
ab
Dead Weight Pressure Gauge calibration set up
2 Bimetallic Thermometer calibration set up
3 Flapper Nozzle System
4 On-Off temperature controller set up
5 calibration of thermocouple
6 Resistance Thermometer calibration
7 Measuring pressure with four differnet types of Manometer
8 Strip chart Recorder
9 Relative Humidity Meter
10 Circular Chart Recorder
Networking Lab
Computer Systems
Printer
Software:
1. Window
2. MS Office
3. Adobe Flash Player
4. Adobe Reader
5. HTML
6. Corel Draw
7. Page maker
8. Frontpage
LAN Trainer
Firewall (Hardware)
D-Link Switch (24 port_
WiFi Router
UPS
Cisco Router
Software Lab(101)
Computer Systems
Printer
Scanner (A-5)
Software:
1. Window
2. MS Office
3. C/C++
4. Linux
D-Link Switch (24 port)
LCD Projector
UPS
Router
HP Server
2 Software Lab(104)
Computer Systems
Printer
Scanner (A-5)
Software:
1. Window
2. MS Office
3. Visual Studio
4. Oracle /SQL
D-Link Switch (24 port)
UPS
Router
3 Software Lab (204)
Computer Systems
Printer
Scanner (A-5)
Software:
1. Window
2. MS Office
3. Visual Studio
4. Oracle /SQL
5. Phython
UPS
D-link Switch (24 port)
LCD Projector
Laser Pointer
Router
8085 Micro Processor KIT
1
Analog Electronics
-II Lab.
RC Comled Amplifier
2 Push-pull amplifier
3 Voltage gain emitter follower
4 Hartley Oscillator & collpilts
5 Phase shift wein Brigde Oscillator
6 Clipping ckt
7 Clamping ckt
8 Monostable multi vibrator
9 OP-Amp (741)
10 Power Supply (7805/7905)
1
Analog Electronics -I
Lab.
Multimeter
2 DSO
3 CRO
4 Function Generator
5 Audio Signal Generator
6 Multipower Supply
7 Regulated DC Power Supply
8 AC Milli Voltmeter
9 Voltage Regulator
10 PN jn. Diode
11 Zener diode
12 Rectifier (Half-wave, Full-wave Bridge)
13 V-I Characteristics (FET)
14 Voltage gain single stage CE amplifier kit
1
Instumentation Lab.
Liquid Level Transducer
2 Temperature Measurement Thermocomple kit
3 Digital Temperature controller
4 Thermistor ON-OFF Transducer
5 Capacitive Transducer
6 Potentio meter
7 LVDT
8 Strain gauge
9 Load cell
10 PH meter
1
Power Electronics Lab.
V-I Characteristics of SCR
2 V-I Charac. of TRIAC
3 V-I Charac. of UJT
4 V-I Charac. of DIAC
5 UJT Relaxation oscillator
6 Single Phase Half controlled rectifier
7 Single phase full rectifier
8 AC- Fan controlled using TRIAC babe
9 UPS (online- offline)
1
Consumer lab
Frequency response of Microphone, Loud Speaker
2 VCD Player
3 Black & TV Receiver
4 Coler TV HD
5 DTH System
6 Scanner
1
Project Lab
Film making unit
2 PCB Curing /Oven Machine
3 U.V. Exposure Machine Double Sided
4 Photoresist Dip coating Machine
5 PCB etching Machine
6 PCB Drilling Machine
7 PCB Shearing Machine
8 Consumables & Chemicals of above
9 Dye / Developer (2 in 1 Unit)
10 Art Work Table
1
NFTL Lab
Experimental Kit to measure the characteristic impedance of
symmetrical T and Л networks
2
Experimental Kit to measure the image impedance of a given
asymmetrical T and Л networks
3
Experimental Kit for a prototype low pass filter: a) Determine
the characteristic impedance experimentally b) Plot the
attenuation characteristic
4
Experimental Kit to design and measure the attenuation of a
symmetrical T/ Л type attenuator
5
Experimental Kit for a prototype high pass filter: a) Determine
the characteristic impedance experimentally b) To plot the
attenuation characteristic
6
a) Experimental Kit to plot the Impedance characteristic of a
prototype band-pass filter b) To plot the attenuation
characteristic of a prototype band pass filter
7
a) Experimental Kit to plot the impedance characteristic of m-
derived low pass filter b) To plot the attenuation
characteristics of m-derived high pass filter
8
Experimental Kit to observe the information of standing
waves on a transmission line and measurement of SWR and
characteristic impedance of the line
9
Experimental Kit to draw the attenuation characteristics of a
crystal filter
1
Optical Fiber Communication
Lab
Optical Power meter
2
Fiber optic Tranner kit
3
Fiber optic connectorization kit
1
Computer Proggraming & Application
Computer System i 5 with TFT, Keyboard & Mouse
2
Computer Table
3
Computer Chairs
4 Laser jat Printer
1
Microwave & Radar
Engg.
Klystron Mount
2
Isolator
3
Frequency Meter (DRF)
4
Variable Attenuator
5
Slotted Section
6
Tunable Probe
7
Detector Mount
8
Movable Short
9
Matched Termination
10
S.S. Tuner
11
Waveguide Stand
12
VSWR Meter
13
Solid State Klystron Power Supply
14
Cooling Fan
15
BNC Cable
16
Shorting Plate
17
Klystron Tube
18
Magic Tee
19
M.H.D. Coupler : 3dB
20
M.H.D. Coupler : 10dB
21
M.H.D. Coupler : 20dB
22
Pick Up Horn
23
Slotted Antenna -Broad Wall
24
Slotted Antenna - Narrow Wall
25
Dielectric Antenna
26
E- Sectorial Horn
27
H - Sectorial Horn
28
Parabolic Disc
29
Pyramidal Horn
1
WMC
GPS trainer “SCIENTECH” model 2276
2
Bluetooth technology trainer “NVIS FROM SCIENTECH” model 4003
3
CDMA Trainer “SCIENTECH” model 2115
4
GSM Trainer kit with application module “SCIENTECH” model 2133 & 2133AM
5
Wifi trainer kit “SCIENTECH” model 5002A
1
PCE LAB
FM Transmitter & receiver trainer
2 Pulse width Modulation & Demodulation kit
1
BEE Lab Volmeter
2 Ammeter
3 Wattmeter
4 Thevenins Theorem kit
5 Nortons Theorem kit
6 Super position theorem kit
7 Max. Power Transder Theorem kit
8 Lead-Acid storage battery
9 R-L-C Series circuit kit
10 R-L-C Parallel circuit kit
1
EIM Lab
HUMIDITY METER
2
THERMO COUPLER TRAINER KIT
3 INDUCTANCE BY HAYS BRIDGE
4 INDUCTANCE & CAPACITANCE BY MAXWELLS BRIDGE
5 CAPACITANCE BY WEIN'S BRIDGE
6 SELF INDUCTANCE BY HAY'S BRIDGE
7 3 HP SLIPPING INDUCTION MOTOR
1
DE-I
DIGITAL MULTIMETER TRAINER
2
DIGITAL GATE TRAINER
3 SHIFT REGISTER
4 BCD TO DECIMAL DECODER
1
Electrical Machine Lab
PANEL TO PERFORM MEASUREMENT OF ANGULAR
DISPLACEMENT ROTOR OF SLIPING INDUCTION MOTOR
2 PANEL TO STUDY SPEED CONTROL OF DC SERIES
MOTOR
3 TRANSFORMER SINGLE PHASE 1KVA WITH TAPPING AT
50%, 36.6%, 14.4% COPPER WINDING
4 PANEL TO PERFORM MEASUREMENT POLARITY
VOLTAGE RATIO V-I REALTIONSHIP IN 3 PHASE
TRANSFORMER
5 DC POWER SUPPLY (10 AMP)
6 2 HP DC SHUNT MOTOR 2200, 1500 rpm
7 PANEL TO STUDY SPEED CONTROL OF DC SHUNT
MOTOR
8 TECHNOMETER FOR 2 HP DC SHUNT MOTOR 220V,
1500rpm
1
Power Lab
CKT. Breakers & Isolators
2 Over current relay
3 CT's & PT's
4 Distribution Box Energy Meter
5 MCB
6 KIT KAT Fuse
7 Clip -on-meter
8 Dielectic Strength Machine
1
Machince Lab-I
Slip ring I/M and Panel
2 D.C Shunt Motor Rheostats
3 D.C series Motor+Starter
4 3-Point Starter
5 Transfprmer 1-Phase, 2KVA
6 Transfprmer 1-Phase, 2KVA
7 Transfprmer 3-Phase, 5KVA
1
Electrical WorkShop-II
Change over Switch
2 Energy Meter
3 Ceeling Fan
4 Auto Electric Iron
5 Single Phase Motor
6 Three Phase Motor
1 PLC Lab PLC trainer model Scientech ST 2401A with temp controlled simultation
software
1
ELTX-I
U-I characteristics of a Semi conductor diode kit
2 U-I characteristics of a Zenor diode kit
3 Input /Output wave shapes of half-wave rectifier trainer kit
4 Input /Output wave shapes of full-wave rectifier trainer kit
5 Input/Output wave shapes of a full wave rectifier with (i) Shunt capacitor
(ii) Series Inductor (III) filter circuits
6 Input/Output characterstics of a transistor MCB configuration kit
7 Input/Output characteristics of Trannsistor in CE configuration kit
8 Operating point in case of (i) fixed biased circuit(ii) Potential divider
biased circuit trainer kit
1
ELTX-II
Two stage RC coupled amplifier Trainer Kit
2 Push-Pull amplifier kit
3 Single stage transistor amplifier kit
4 input/output impedance for an emiitor follow circuit kit
5 to measure freqauently generation M hartley kit
6 To measure frequency generation R-C phase shift Oscilator kit
7 Clipping kit
8 Clamping kit
9 Asable multivibrator kit
10 Bistable multivibrator kit
1 Computer Lab
(FAA)
PC
Software for Tally, GST ERP-9
1 SOM lab
Universal testing machine
2 Digital hardness
3 Torsion testing machine
4 Tensile testing machine
5 Izod/charpy testing machine
6 Spring testing machine 1
RAC LAB
Refrigeration Kit
2 Study of Thermostatic switch, LP/HP cut out, OLP, Filter, Drier and strainer
3 Study of cut section of single cylinder Compressor (Model)
4 Vapour compression Test rig
5 To detect faults of a refrigerator/ window A/C
6 Refrigerant charging Unit
7 For identification of various parts of refrigerator/window A/C
1
Metallurgical microscope
2 Metallurgical polishing machine single disc
3 Heat t treatment furnace
4 Specimen of 25 materials
5
MM LAB
Quenching apparatus
6 Abrasive disc cut off machine
List of Experimental Setup in each Laboratory/ Workshop
Sr. No.
Name of Laboratory/workshop
Name of Essential Equipment(s)/machinery required for conduct of practical as per curriculum
1
PLUMBING SHOP
PIPE DIE SET
2 TAP SET
3 LAMI WALL CHASER WITH BLADE
4 HYDROLIC PIPE BENDING
1
FITTING SHOP
BENCH DRILLING MACHINE
2 SURFACE PLATE
3 GRINDER
4 CUT OF SAW MACHINE
1
SHEET METAL
SHEET CUTTING MACHINE
2 ROLLING MACHINE
3 SHEET BENDING MACHINE
4 SHARING MACHINE HAND OPERATED
5 BENCH GRINDER
1
CARPENTRY SHOP
BAND SAW
2 WOOD TURNING LATHE MACHINE
3 CIRCULAR SAW
1
WIRING SHOP
TACHOMETER
2 ELECTRIC KATTLE
3 DESERT COLLER
4 D.O.L STARTER
5 CHANGE OVER SWITCH
6 SINGLE PHASE ENERGY METER DIGITAL
1 AM LAB
Grave sand apparatus
2 Jib crane apparatus
3 Simply supported beam apparatus
4 Inclined plane apparatus
5 Screw jack apparatus
6 Worm and worm wheel apparatus
7 Winch crab apparatus
8 Universal force table
1
CAD LAB
30 COMPUTERS (8GB ram intel core i7 1TB hard disk, 2 GB graphics)
2 Plotter
1
WELDING SHOP
WELDING TRANSFORMER SET
2 WELDING TRANSFORMER SET(SINGLE PHASE)
3 OXY -ACETY LENE GAS WELDING SET (HIGH PRESSURE)
4 HAND DRILL MACHINE
5 PORTABLE DRILL MACHINE
6 SPOT WELDING MACHINE
7 PEDESTAL GRINDER DOUBLE ENDED
1
TURNING SHOP
GRINDER
2 LATHE Machine
3 POWER HACKSAW
1
TOOL ROOM
DRILL MACHINE
2 HORIZONTAL MILLING MACHINE
3 GEAR HOBBING MACHINE
4 LATHE MACHINE
5 BENCH GRINDER SINGLE PHASE 22V
6 POWER HACK SAW
7 SHAFT GRINDING MACHINE
1
MACHINE SHOP
SHAPER MACHINE
2 POWER HACK SAW
3 LATHE MACHINE
4 SLOTER MACHINE
5 PLANNER MACHINE
6 Universal Milling Machine
7 Vertical Milling Machine
1 CNC
FMS (Flexible Manufacturing System)
• Computing Facilities
• Internet Bandwidth : 60Mbps
• Number and configuration of System : 270 Configuration
❖ Acer PC(CPU) VT/F/core i5 6400(2x4 GB RAM) 80 GB Hard disk monitor VT96HQL96 qbm ❖ DELL make desktop model optiplex 90 with TFT 18.5” ❖ DELL Intel core ™ i5 2400 CPU with 4GB RAM with preloaded window 7 Pro and 500 GB HDD ❖ DELL Optiflex 30608FF(I5) with TFT(4GB RAM) ❖ HCL P-IV 3.0 GHz 256 MB RAM 1.44 MB FDD, 80GB HDD 104 keyboard, XP Preloaded ❖ Pentium III 450MHz with intel chipset, 64 MB SDRAM, 2x4.3GB Ultra DMA HDD, 1.44MB FDD,
• Total number of system connected by LAN : 270
• Total number of system connected by WAN : 270
• Major software packages available ➢ Microsoft Windows 7 Starter ➢ MS Office Media Kit ➢ MS Office 2007 Professional Plus(License Only) ➢ Turbo C++ ➢ EMBARCADERO C++ BUILDER PROF. XE AAD (NAMED) ESD(10 USER) ➢ TALLY 9.0 ➢ AeCreativeCloudforteamsALLApplsLicSubsNewMoEduDev ➢ VSPro 2017 SNGL OLP NL Acdmc(5 User)
• Special purpose facilities available
➢ Smart Class Room
➢ Nodal Centre of IIT for Virtual Labs
• Innovation Cell NOT AVAILABLE
• Social Media Cell NOT AVAILABLE
• Compliance of the National Academic Depository (NAD), applicable to PGCM/ PGDM Institutions and University Departments YES
• List of facilities available
• Games and Sports Facilities
❖ The institute have a 200mtr racing track where all Athletics events are organized every year. 2015-16, 2016-17,
trial for Inter polytechnic, 2017-18 Athletics Meet)
❖ Football and Handball Sports facilities are there.
❖ 2 courts for badminton for Boys and Girls
❖ Well equipped Gym
❖ Table tennis facility (Indoor) – Boys and Girls
❖ Kho-Kho and Kabaddi for boys and Girls
• Extra-Curricular Activities
Brief account of the activities of the Institute during year 2015-16
1. Celebration of Republic Day (26 January).
2. Independence Day (15 August) celebrations – singing of Patriotic songs, Speeches.
3. Engineer’s Day (15th September) celebration in classes.
4. Gandhi Jayanti and Lal Bahadur Shastri’s birthday was celebrated (2nd October)
5. Sardar Vallabhbhai Patel Jayanti (31st October).
6. Rangoli making on all occasions and celebrations.
7. Poem recitation, slogan writing on importance of Beti Bachao, Beti Padhao.
Brief account of the activities of the Institute during year 2016-17
1. Celebration of Republic Day (26 January).
2. Cleanliness Drive (Swachh Bharat Mission) was conducted in the Institute from 16 -31 May 2016.
3. “Azaadi 70” – “Independence 70” was celebrated from 09-23 August 2016. During this period,
‘Yaad Karo Qurbani’ was the theme of celebration.
• Skits, Patriotic Songs singing, Essay writing competitions, drawing competition was organized.
• Candle light march was carried out in the campus.
4. Independence Day (15 August) was celebrated.
5. Teacher’s Day (5 September) was celebrated in various department of college.
6. Sardar Vallabhbhai Patel Jayanti (31st October).
7. Rangoli making on various occasions such as Blood Donation Day, other celebrations.
8. Poem recitation, slogan writing on importance of Beti Bachao, Beti Padhao.
Brief account of the activities of the Institute during year 2017-18
1. Celebration of Republic Day (26 January).
2. Independence Day (15 August) celebrations – singing of Patriotic songs, Speeches.
3. Engineer’s Day (15th September) celebration in classes.
4. Sardar Vallabhbhai Patel Jayanti (31st October).
5. National Integration Day (19th November) – Pledge / Oath
6. Oath taken on constitution Day (26th November)
7. Swachhata Pakhwada (1- 15 September)
• Cleaning of campus, hostel cleaning, mess cleaning, room cleaning (Best Hostel
room contest)
• Essay competition of Innovative ways for spreading the message of hygiene.
• Elocution competition on ‘Health & Hygiene in our Real Wealth.’
8. All India Essay Writing Event 2017 organized by Shri Ram Chandra Mission (SRCM) &
United Nations Information Centre for India & Bhutan (UNIC) – Students from our
Institute received prizes certificates in 1st & 2nd category in both English & Hindi Essay
writing competition.
9. Rangoli making on various occasions such as Blood Donation Day, other celebrations.
10. Poem recitation, slogan writing on importance of Beti Bachao, Beti Padhao.
11. Mehandi Competition
Award / Trophies won by the Institute-
1. Our Institute got trophy for securing 2nd position by performing Yoga in
Independence Day Celebration in 2015-2016.
2. Certificate of Appreciation was awarded to our Institute for outstanding contribution
in the success of the All India Essay Writing Event 2017 organized by Shri Ram Chandra Mission
(SRCM) & United Nations Information Centre for India & Bhutan (UNIC).
Literary activities :
1. Poem recitation
2. Slogan writing
3. Essay writing
4. Debate
• Soft Skill Development Facilities Special lectures by experts are arranged for final year students. Lecture of soft skill is also available in timetable.
• Teaching Learning Process
• Classroom level teaching learning using audio visual aids.
• Skill training in labs, workshops, industrial training and projects.
• Smart class rooms are available for better learning.
• Lectures by experts from industries are also arranged.
• Industrial visits and tours are also arranged for students.
• Time-to-time seminars are also arranged
• Curricula and syllabus for each of the programmes as approved by the University Available at www.hsbte.org.in and www.gpsonipat.ac.in
• Academic Calendar of the University
• Academic Time Table with the name of the Faculty members handling the Course Available at www.gpsonipat.ac.in
• Teaching Load of each Faculty
Name of the Institute: Govt. Polytechnic, Sonipat
Table A:Teaching load for regular Principal/ HOD/Sr. Lecturer/ Lecturer
Sr. No.
Branch/ Subject Name of regular faculty member
Designation Teaching load assigned
Theory Practical Total
1
Mechanical Engg.
Mr. Anil Kumar Principal 0 8 8
2 Mr. Shivender Dahiya Lecturer 6 12 18
3 Mr. Ramesh Rawat Lecturer 8 12 20
4 Mr. Harsh Chaudhary Lecturer 8 12 20
6 Mr. Baljit Siwach Lecturer 8 12 20
7 Mr. Sartaj Singh Lecturer 8 12 20
8 Mr. Vipin Lecturer 6 12 18
9 Mr. Harish Dhingra Lecturer 6 12 18
10 Mr. Rajesh Lecturer 6 16 22
1
Applied Science
Dr. R.S.Chauhan Sr. Lect 8 6 14
2 Ms. Pushpa Sr. Lect 6 8 14
3 Mr. Birender Singh Lect. 11 12 23
4 Ms. Kiran Lect. 14 - 14
5 Ms. Kamlesh Lect. 8 16 24
6 Ms. Jyoti Lect. 11 12 23
7 Ms. Sweety Lect. 11 12 23
8 Ms. Anju Lect. 14 - 14
9 Ms. Poonam Lect. 14 - 14
1
Automobile Engg
Mr. Vijay Singh Sr. Lect. 6 11 17
2 Mr. S.L.Gupta Lect. 6 13 19
3 Mr. Jogesh Dahiya Lect. 6 13 19
4 Mr. Parveen Malik Lect. 2 18 20
1
Chemical Engg
Mr. Parvesh Sangwan HOD 4 10 14
2 Mr. Jasbir Singh Sr. Lect. 7 9 16
3 Mr. Latish Chabra Lect. 8 11 19
4 Mr. Kuldeep Gulia Lect. 7 11 18
5 Mr. Samarpal Singh Lect. 7 12 19
1
Computer Science & Engg.
Mr. Dinesh Singh Sr. Lect./ TPO 4 6 10
2 Mr. Pankaj Malik Sr. Lect. 6 6 12
3 Ms. Garima Rohilla Lect. 6 16 22
4 Ms. Naresh Gill Lect. 3 20 23
5 Mr. Virender Nandal Lect. 4 20 24
6 Ms. Poonam Dahiya Lect. 6 16 22
1
Electrical Engg.
Mr. Ranbir Singh Lect. 7 12 19
2 Mr. Nar Singh Lect. 6 12 18
3 Ms. Priti Girdhar Lect. 8 10 18
1
Electronics & Communication
Engg.
Mr. Tejpal Rawat HOD 3 11 14
2 Mr. Lincoln Hadda Sr. Lect 6 12 18
3 Mr. Manoj Sangwan Lect. 8 14 22
4 Ms. Ramesh Kumari Lect. 8 18 26
5 Ms. Pooja Sindhu Lect. 9 16 25
6 Mr. Patanjali Kaushik Lect. 6 20 26
1
Instrumentation & Control
Ms. Suparna A HOD 4 8 12
2 Mr. Virender Sindhu Lect. 5 9 14
3 Mr. Punit Kaushik Lect. 10 6 16
4 Mr. Krishan Kumar Lect. 6 10 16
5 Ms. Bunty Lect. 10 8 18
6 Mr. Jai Parkash Lect. 10 8 18
1 Finance & Accounts Auditing
Ravinder Dahiya Lect. 11 6 17
2 Mahipal Singh Lect. 18 - 18
Table B:Teaching load for regular Workshop Superintendent/ Foreman Instructor/ Workshop Instructor
Sr. No.
Branch/ Subject
Name of regular Workshop Supdt./ Foreman Instructor/ Workshop Instructor
Designation Teaching load assigned
1
Workshop
Mr. M. S. Malik W/ Supdt. 0 10 10
2 Dr. Anand Parkash F/I 0 24 24
3 Mr. Dinesh Singh Mor F/I 0 18 18
4 Mr. Sudarshan Vats F/I 0 15 15
5 Mr. Hari Om F/I 0 26 26
6 Mr. Satish Kumar W/I 0 26 26
7 Mr. Babu Lal W/I 0 0 HQ Shifted 8 Mr. Gulshan Arya W/I 0 0
9 Mr. Vinod Kumar W/I 0 27 27
10 Mr. Jai Kanwar W/I 0 27 27
11 Mr. Hari Kishan W/I 0 27 27
12 Mr. Virender Rathee W/I 0 27 27
13 Mr. Vipin Kumar W/I 0 27 27
14 Mr. Radhe Shyam W/I 0 27 27
15 Automobile Engg. Mr. Satyavan W/I 0 26 26
16 Electrical Engg. Mr. Ved Parkash W/I 0 20 20
• Internal Continuous Evaluation System and place YES
• Student’s assessment of Faculty, System in place YES 16. Enrollment of students in the last 3 years Year Student enrolled 2016 517 2017 503 2018 586 17. List of Research Projects/ Consultancy Works
• Number of Projects carried out, funding agency, Grant received NONE
• Publications (if any) out of research in last three years out of masters projects NONE
• Industry Linkage
S No.
Industrial Visits made to Company ( Give Complete Address & Contact Details)
Visit made on dated
Total No. of Students enefitted
Semester Wise and Branch wise detail
of Students
1 Yakult Danone India Pvt. Ltd.Plot no.
402-405 & 410-413, Food Park,HSIIDC,
Rai, Sonepat, Haryana, 131029
04/09/2017 at
9:00 AM 31+53
3rd Sem. I&C and 5th Sem Electronic &
Communation
2 Yakult Danone India Pvt. Ltd.Plot no.
402-405 & 410-413, Food Park,HSIIDC,
Rai, Sonepat, Haryana, 131029.
05/09/2017 at
9:00 AM 23+61
5th Sem I&C and 5th Sem. Chemical Engg.
3
GOLDEN ROLLS PVT. LTD.G. T. Road, Bahalgarh, Opp. Sports Authority of India,Village Sultanpur, Distt. Sonipat 131001, Haryana, India Phone:+91-130-6452666 / 6452777Fax:+91-11-66173853 Email: [email protected]
04/09/2017
at10:00 AM 61
3rd Sem Mechnical Engg.(M1)
4
GOLDEN ROLLS PVT. LTD.G. T. Road, Bahalgarh, Opp. Sports Authority of India,Village Sultanpur, Distt. Sonipat 131001, Haryana, India Phone:+91-130-6452666 / 6452777Fax:+91-11-66173853 Email: [email protected]
05/09/2017
at10:00 AM 60
3rd Sem Mechnical Engg.(M2)
5 CHAMPIONN GYM FITNESS EQUIPMENS PVT. LTD, 1680-81, HSIDC, Rai Distt. Sonipat
27/09/2017
at10:30 AM 59
5th Sem Mechnical Engg. (M2)
6 CHAMPIONN GYM FITNESS EQUIPMENS PVT. LTD,1680-81, HSIDC, Rai Distt. Sonipat
28/09/2017
at10:30 AM 73
5th Sem Mechnical Engg. (M1)
7 Fazilpur Sub-Station 16/01/2018 60 6th Sem Electrical
Engg.
8
M/s Network Bulls, SCO-9,10,11,12-2nd &3rd Floor, Above Vishal Mega Mart, Old Delhi Road, Sector -14, Gurgaon-122001,Haryana
02.04.2018 53 6th Sem Computer
Engg.
9
M/s Network Bulls, SCO-9,10,11,12-2nd &3rd Floor, Above Vishal Mega Mart, Old Delhi Road, Sector -14, Gurgaon-122001,Haryana
05.04.2018 52 6th Sem Electronic &
Communation
• MoUs with Industries (minimum 3)
Information of MOUs made for duration Academic Year 2017-18 (from 15.07.2017 to 14.07.2018)
Name of Polytechnic: Govt. Polytechnic, Sonipat Name of Principal: Mr. Anil Kumar Cell: 9466824004 Email: [email protected] Name of TPO: Mr. Dinesh Singh Cell: 9468060000 Email : [email protected]
S No.
MOU Signed with Company & Complete Address
Concerned Person Designation & Contact details
Signed on dated
Valid Upto Objectives of MOU# (Placement,Training, Consultancy Etc.)
1
M/s Golden Roll Pvt. Ltd. G. T. Road, Bahalgarh, Opp. Sports Authority of India, Village Sultanpur, Distt. Sonipat 131001, Haryana, India, Sonipat, Haryana 131001
Sh. Anil Swami, Manager (9215145279)
31.10.2017 30.10.2020 Placement, Training, Industrial Visit & Expert Lectures
2
M/s Champion Gym Fitness Equipment Pvt. Ltd. 1680-81, HSIDC Rai, Sonepat
Sh. Tara Chand Gandhi, Managing Director (9810075333)
30.10.2017 29.10.2020 Placement, Training, Industrial Visit & Expert Lectures
3
M/s R. B. Metrology, #8 New Nandwani Nagar, Sonepat
Sh. Dinesh Ahuja, Managing Director (9212482031)
28.02.2018 27.02.2021 Placement, Training, Industrial Visit & Expert Lectures
4
M/s Supreme Rubbers, G. T. Road Bahalgarh, Opp. SAI Complex, Sonepat
Sh. Hitender Kumar, Manager (0130-6452666, 645277)
28.02.2018 27.02.2021 Placement, Training, Industrial Visit & Expert Lectures
5 M/s Sligo Industries, Rohtak
Sh. S. K. Sharma, Manager(9812045880)
Placement, Training, Industrial Visit & Expert Lectures
18. LoA and subsequent EoA till the current Academic Year Available at www.gpsonipat.ac.in 19. Accounted audited statement for the last three years
Audited Statement of Account of 2016-17(Income & Expenditure Statement for complete year)
Income Expenditure
Sl. No.
Details Amount Sl. No.
Details Amount
1 Tuition Fees 5500000 1 Salary 98516390
2 Other fee/amount collected from students
1968300 2 Administrative expenses 4200000
3 Grants from Govt. / Private agencies
0 3 Training and Development
0
4 Grants / Contribution from other sources (Management)
0 4 Laboratory consumables
0
5 Scholarships received 0 5 Library 0
6 Other income 700000 6 Travel 107098
7 Fees Paid to University/ 0
Board/ Government/AICTE/UGC
8 Repairs and Maintenance 210000
9 Scholarships/ Concessions/ Fellowships/Honorarium etc., awarded/incurred(other than Govt. grants)
0
10 Expenditure of grants received from Govt. / Private agencies
0
11 Depreciation 0
12 Any other expenditure 15000000
Total 8168300 Total 118033488
20. Best Practices adopted, if any