RD-700NX DataList e - Sonic Electronix · Live Set List MALLET PAD
Sonic Electronix · The I-Beam TE-IFD is a camera system that utilizes a front facing infrared...
Transcript of Sonic Electronix · The I-Beam TE-IFD is a camera system that utilizes a front facing infrared...
CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition.
iBEAM Vehicle Safety Systems® iBEAMUSA.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 4/24/18 INSTTE-IFD
I N S TA L L AT I O N I N S T R U C T I O N STE-IFD
• Includesanightvisioninfraredfrontcamera •Daytimevideoresolution–1920x1080p •Nighttimevideoresolution–1280x720p •120degreewidelensangle •170degreediagonallensangle •100-200mnightvisionrange •Strongfogpenetration
• Includesarearcamera •Videoresolution–1280x720p •120degreewidelensangle •170degreediagonallensangle •ApertureF2.0• Digitalrecordersupportingupto32GBUSB
flashdrive• Automaticrecordingupto28hours
• Canbeviewedinthedayoratnight• Built-ing-forcesensordetectscollisions• H.264videoformat• JPEGimageformat• Looprecordingsupport• Built-inmotionsensor• Appcontrolled• 3-yearwarranty
TOOLS REQUIRED•Wirecutter•Crimptool•Soldergun•Tape•Connectors(example:butt-connectors,bellcaps,etc.)
TABLE OF CONTENTS
Introduction............................................................2InstallingtheTE-IFD...........................................2-3Userguide.............................................................. 3Features.............................................................. 4-5TE-IFDLayout..........................................................6
Infrared Night Vision Camera System
INTERFACE COMPONENTS
•TE-IFDInterface•Powerharness•Videoharness•USB&Wi-Ficable•Nightvisioninfraredfrontcamera•Rearcamera•Cameraextensioncables(2)•Licenseplatemountwithinfraredlights•Infrareddriver
INTERFACE FEATURES
1.800.221.0932 | iBEAMUSA.com2
TheI-BeamTE-IFDisacamerasystemthatutilizesafrontfacinginfrarednightvisioncameratomonitoranddigitallyrecordoncomingtrafficandobstaclesatnight.AfrontmountedlicenseplatewithhighpowerinfraredL.E.D.’sassistthecamerainprovidingaclearimageatnight.Astandardrearmountedcamerahasbeenprovidedaswelltocompletethepackage.Bothcameraimageswillbeshownthrougheitheranaftermarketradio,orastand-alonemonitor(notprovided).
Supportinguptoa32GBUSBflashdrive(notincluded),theTE-IFDcanrecordupto28hoursofcontinuousrecording,automaticallywhileyouaredriving,throughboththefrontandrearcameras.Abuilt-ing-forcesensorwilldetectacollisionwhichwillthenlockandprotectthevideofilesfrombeingoverwritten.TheTE-IFDcanalsorecordimageswhilethevehicleisparkedwiththehelpofofabuilt-inmotionsensorlocatedwithinthefrontcamera.Recordedvideoscanbeeasilyretrievedandplayedback,andusedasevidenceifneedbe.
Inadditiontothesefeatures,thecamerasystemcanalsobecontrolledwithanAndroidoriOSmobilephoneviaafreedownloadableapp.
Color instructions are available using the QR code below or visiting: http://ibeamusa.com/index.php?main_page=product_info&cPath=33_36&products_id=200
INTRODUCTION INSTALLING THE TE-IFD
> Front Camera:Findasuitableplaceontheinsideofthewindshieldtoinstallthenightvisioninfraredfrontcamera.Behindornearthemirrorwouldbebest.Beforeunpeelingthetapetoinstallthecamera,adjustthecameralenstofaceforward.Thecameralenswillsimplyrotateupordown.Cleanthewindshield,unpeelthedoublesidedtape,andthenadherethecameratothewindshield.RoutethecabletothelocationwheretheTE-IFDwillbeinstalledat,thenconnectthecameratotheTE-IFDinterface.(FigureAonnextpage)
> Rear Camera:Using(2)stainlesssteelPhillipsscrewsprovided,installthecameralabeled“RearCamera”toalocationinthecenteroftherearofthevehicle.Thelicenseplateareainmostvehiclesisagoodlocation.Leavetheadjustmentscrewslooseuntilthecamerahasbeenadjusted.Oncethecamerahasbeenadjusted,tightenthescrews.Routethecableintothevehicle,andthentothelocationwheretheTE-IFDinterfacewillbeinstalledat.ConnectthecameratotheTE-IFDinterface.(FigureAonnextpage)
> License plate mount with infrared lights:Removethelicenseplatefromthefrontofthevehicleandinstallthelicenseplatemountwithinfraredlightsbetweenthelicenseplateandthevehicle.Connecttheinfrareddriver,thenroutetheBlackandYellowwirestothebattery.ConnecttheBlackwiretothenegativepost,andtheYellowwiretothepositivepost.ConnecttheRedwiretoanaccessorypowersource.
> Video harness:ConnecttheYellowRCAjacktoanaftermarketradioorstand-alonemonitorprovidingthecameraimage.Iftheradio/monitorhasareversetriggerwire,connecttheRedwiretothereversetriggerwire.Ifnot,tapeoffanddisregardtheRedwire.ConnecttheharnessintotheTE-IFDinterface.
Continuedonthenextpage
REV. 4/24/2018 INSTTE-IFD 3
INSTALLING THE TE-IFD (CONT.) INSTALLING THE TE-IFD (CONT.)
> USB & Wi-Fi cable:ConnectthecabletotheTE-IFDinterface,thenroutetheUSBendofthecabletoalocationthatishidden,yetaccessibletotheownerofthevehicle.ThisiswheretheUSBflashdrive(notprovided)willconnectto.
Note:ThiscablealsoincludestheWi-Fiantennainternallyandmustbeconnected,regardlessifaUSBflashdrivewillbeusedornot.
(FigureA)
Night vision infrared front camera
TE-IFD interface (inside vehicle)
License platemount
Rear camera
Camera extension cable
Rear camera
> TE-IFD interface harness:
1. ConnecttheBlackwiretochassisground.
2. ConnecttheYellowwiretobatterypower.
3. ConnecttheRedwiretoaccessorypower.
4. ConnecttheharnessintotheTE-IFDinterface.
Button function
Power Button:
> Pressingthepowerbuttonwillswitchbetween:NightVision/FrontView/RearView/Off
Note:TurningtheTE-IFDoffwillalsoclosetheapp.
M Button:
> Disregardthisbutton,itwillnotbeusedinthisapplication.
USER GUIDE
1.800.221.0932 | iBEAMUSA.com4
FEATURES
> Automatic recording:Afterthevehiclehasbeenstarted,theTE-IFDwillstartrecording.Whenthevehicleisturnedoff,theTE-IFDwillthensavetherecordedfilestoaUSBflashdrive(notprovided),andthenturnoff.WhentheUSBflashdriveisfull,olderfileswillbedeleted.
> Mobile phone control:TheTE-IFDcanbecontrolledviaafreedownloadableapp.FollowtheinstructionsthatfollowstosetupamobilephonetoactasaWi-FihotspotfortheTE-IFD.
1. Downloadandinstallthefreeappfromthemobilephonesappstore.Searchfor“carview”tofindtheapp.Android only:Takenotethattherewillbetwoidenticallookingappsinthesearchresults.ReferenceFigureAtoensurethatthecorrectappisselected.Thecorrectappwillhavealongerfilenameasshown.(FigureA)
2. Turnthekeytoignition.
3. Fromthemobilephone,turnontheWi-Fihotspotfeature.(FigureB)
Note:DuetothemanydifferentwaystoturnontheWi-Fihotspotfeature,itisrecommendedtorefertotheowner’smanualincludedwiththedevice.Theimagesshowninthefiguresareonlyprovidedasanexample.
4. Onceprompted,type“car_0001”forthenetworkname,and“12345678”forthepassword.Pressthe“Save”button.TheTE-IFDwillautomaticallyconnectatthispoint.
Note: ForiOSmobilephones,thenameofthephonemustbechangedto“car_0001”.Thiscanbechangedbacklater.
Continuedonthenextpage
(FigureA)
(FigureB-Android) (FigureB-iOS)
REV. 4/24/2018 INSTTE-IFD 5
FEATURES (CONT.)
5. OpentheapptocontroltheTE-IFD.Someoftheoptionsare:SwitchingPicture/SyncTime/SettingColor/MobilePhoneAirplay/VideoPlayback/TalkingPicture/Wi-Finame&Password(FigureC)
Note:ForiOSmobilephones,select“OK”,gointothesettingswithintheapp,select“OK”,typeinthename/password,selectWPA2,andthenpress“Save”.Once“Novideodevice“popsup,select“OK”,pressthewhitearrowbackbuttononthetoprightcornerofthescreen,andthenselect“OK”.(FigureD)
6. ToprotectpersonalprivacyandtoalsoavoidWi-Ficonflicts,itisrecommendedtochangethenameandpasswordwithintheapp.Onceanewnameandpasswordhasbeenchosen,select“save”.TheTE-IFDwillthenreboot.Atthispointchangethehotspotnameandpasswordwithinthephonetothesamenameandpasswordchosen.ForiOSmobilephones,itmaybebesttochangethenametowhatthenameofthephonewaspreviously.
> Motion detection (optional):Whilethevehicleisinparkedandunattended,theTE-IFDcanbetriggeredbymotionwhenanobjectmoveswithinthesensingareainthefrontofthevehicle.Toenableordisablethisfeature,thesoftwareintheTE-IFDwillneedtobeupdatedonline.Instructionsonhowtoperformthisupdatearealsoavailableonline.PleaserefertothewebsitelinkorQRcodeinthebeginningoftheinstructionbooklet.
> Video lock/unlock:Thiswillallowfilestobelockedorunlocked.
> Sync time:ThiswillallowthedateandtimefromthemobilephonetosynctotheTE-IFD.
> Video playback:Thiswillallowaselectedvideofiletobeplayedbacked.
(FigureD)
(FigureC)
Switch Cameras Record
SnapshotSync Time
Settings
Mirror Device to IFD Video Output
1.800.221.0932 | iBEAMUSA.com6
Black - Chassis ground Yellow - Battery Power Red - Accessory Power
Black - Chassis groundYellow - Battery PowerRed - Accessory Power
USB & WiFi cable
To radio/monitor
TE-IFD LAYOUT
REV. 4/24/2018 INSTTE-IFD 7
KNOWLEDGE IS POWEREnhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
®
Metra recommends MECP certified technicians
IMPORTANTIf you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
iBEAM Vehicle Safety Systems® iBEAMUSA.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 4/24/18 INSTTE-IFD
I N S TA L L AT I O N I N S T R U C T I O N STE-IFD