Solutions for Fixed-Center Drives and Timing Belt Linear Drives...All timing belt linear drives...
Transcript of Solutions for Fixed-Center Drives and Timing Belt Linear Drives...All timing belt linear drives...
B218
Clamps and Tensioner IdlersSolutions for Fixed-Center Drives
and Timing Belt Linear Drives
The World Leader In Polyurethane Timing Belts
2 Clamps and Tensioner Idlers
ClampsSolutions for Timing Belt Linear Drives
All timing belt linear drives require a clamp to transfer the belt motion to linear shuttle travel. BRECOflex clamps and tensioning clamps for Metric and English pitch belts ensure a solid attachment for utilization of full belt strength. Custom clamps are available in various materials and coatings.
• Standard Clamp
• Half Clamp
• Tensioning Clamp
Recommended Clamp types and Application Examples
Standard Clamp - used for connecting both belt ends together at the carriage
Half Clamp - used for connecting each belt end to the carriage or machine frame
Tensioning Clamp - used like a half clamp, but also to adjust tension in the system
3
ClampsStandard Clamps - T-Series
Standard Clamps (Metric pitches) - Used for connecting both belt ends
Clamp part description:B x L (belt pitch) Type (O or B)Type O = clamp with no holesType B = clamp with holes (shown)
Note: - Standard material is AL 60601- 5 teeth minimum engagement recommended at each belt end(*) 6 mounting holes for T2.5 clamps(*) 6 mounting holes for T2.5 clamps
T2.5
T5
10
20
30
40
50
60
75
110
140
50
60
20
30
38
46
62
94
124
30
80 20 10
15 65.5
5.5120
Standard Clamp Dimensions - T Series Metric
25
32
50
75
100
T10
T20
Belt Pitch Belt Widthb(mm) Part Description B
(mm)L
(mm)d
(mm)m
(mm)a
(mm)c
(mm)H
(mm)
30 x 50 T2.5 Clamp Type (O or B*)
40 x 60 T2.5 Clamp Type (O or B*)
50 x 120 T5 Clamp Type (O or B)
60 x 120 T5 Clamp Type (O or B)
75 x 120 T5 Clamp Type (O or B)
110 x 120 T5 Clamp Type (O or B)
140 x 120 T5 Clamp Type (O or B)
50 x 160 T10 Clamp Type (O or B)
60 x 160 T10 Clamp Type (O or B)
75 x 160 T10 Clamp Type (O or B)
110 x 160 T10 Clamp Type (O or B)
140 x 160 T10 Clamp Type (O or B)
190 x 160 T10 Clamp Type (O or B)
50 x 200 T10 Clamp Type (O or B)
60 x 200 T10 Clamp Type (O or B)
75 x 200 T10 Clamp Type (O or B)
110 x 200 T10 Clamp Type (O or B)
140 x 200 T10 Clamp Type (O or B)
190 x 200 T10 Clamp Type (O or B)
50
60
75
110
140
190
25
32
50
75
100
150
50
60
75
110
140
190
50
60
75
110
140
190
160
200 6.5 160 60 20
6.5 110 30 10
38
46
62
94
124
174
38
46
62
94
124
166
4 Clamps and Tensioner Idlers
ClampsStandard Clamps - AT-Series
Standard Clamps (Metric pitches) - Used for connecting both belt ends
Clamp part description:B x L (belt pitch) Type (O or B)Type O = clamp with no holesType B = clamp with holes (shown)
Note: - Standard material is AL 6061- 5 teeth minimum engagement recommended at each belt end
5
ClampsStandard Clamps - Imperial Series
Standard Clamps (Imperial pitches) - Used for connecting both belt ends
(*) Belt widths only available in truly endless construction.
Clamp part description:B x L (belt pitch) Type (O or B)Type O = clamp with no holesType B = clamp with holes (shown)
Note: - Standard material is AL 6061- 5 teeth minimum engagement recommended at each belt end
T3/8”(L)
50
60
75
110
38
46
62
94
110 30 106.5160
Standard Clamp Dimensions - Imperial Series
25.4
38.1
50.8
76.2
T1/5”(XL)
T7/8”(XH)
Belt Pitch Belt Widthb(mm) Part Description B
(mm)L
(mm)d
(mm)m
(mm)a
(mm)c
(mm)H
(mm)
50 x 160 T3/8” Clamp Type (O or B)
60 x 160 T3/8” Clamp Type (O or B)
75 x 160 T3/8” Clamp Type (O or B)
110 x 160 T3/8” Clamp Type (O or B)
50 x 120 T1/5” Clamp Type (O or B)
60 x 120 T1/5” Clamp Type (O or B)
75 x 120 T1/5” Clamp Type (O or B)
110 x 120 T1/5” Clamp Type (O or B)
50 x 200 T7/8” Clamp Type (O or B)
60 x 200 T7/8” Clamp Type (O or B)
75 x 200 T7/8” Clamp Type (O or B)
110 x 200 T7/8” Clamp Type (O or B)
140 x 200 T7/8” Clamp Type (O or B)
25.4
38.1*
50.8*
76.2*
25.4
38.1
50.8
76.2
101.6
50
60
75
110
50
60
75
110
140
120
200 6.5 160 60 20
5.5 80 20 10
38
46
62
94
T1/2”(H)
50 x 160 T1/2” Clamp Type (O or B)
60 x 160 T1/2” Clamp Type (O or B)
75 x 160 T1/2” Clamp Type (O or B)
110 x 160 T1/2” Clamp Type (O or B)
140 x 160 T1/2” Clamp Type (O or B)
25.4
38.1
50.8
76.2
101.6
50
60
75
110
140
160 6.5 110 30 10
38
46
62
94
124
38
46
62
94
124
6 Clamps and Tensioner Idlers
ClampsHalf Clamps - T and HTD Series
a1 a
B m
Ld H
Standard Clamps (Metric pitches) - Used for connecting both belt ends
Clamp part description:B x L (belt pitch) Type (O or B)Type O = clamp with no holesType B = clamp with holes (shown)
Note: - Standard material is AL 6061- 5 teeth minimum engagement recommended at each belt end
T10
50
60
75
110
35
42
60
90
40 20 106.578
Half Clamp Dimensions - T and HTD(M) Metric
25
32
50
75
T5
HTD 5M
Belt Pitch Belt Widthb(mm) Part Description B
(mm)L
(mm)d
(mm)m
(mm)a
(mm)al
(mm)H
(mm)
50 x 78 T10 Clamp Type (O or B)
60 x 78 T10 Clamp Type (O or B)
75 x 78 T10 Clamp Type (O or B)
110 x 78 T10 Clamp Type (O or B)
50 x 58 T5 Clamp Type (O or B)
60 x 58 T5 Clamp Type (O or B)
75 x 58 T5 Clamp Type (O or B)
110 x 58 T5 Clamp Type (O or B)
28 x 41.8 5M Clamp Type (O or B)
43 x 41.8 5M Clamp Type (O or B)
44 x 41.8 5M Clamp Type (O or B)
25
32
50
75
10
15
25
50
60
75
110
28
34
44
58
41.8 5.5 25 - 8
5.5 30 15 10
35
42
60
90
T20
50 x 98 T20 Clamp Type (O or B)
60 x 98 T20 Clamp Type (O or B)
75 x 98 T20 Clamp Type (O or B)
110 x 98 T20 Clamp Type (O or B)
25
32
50
75
50
60
75
110
78 9 60 20 20
35
42
60
90
HTD 8M
45 x 66 8M Clamp Type (O or B)
55 x 66 8M Clamp Type (O or B)
75 x 66 8M Clamp Type (O or B)
110 x 66 8M Clamp Type (O or B)
20
30
50
85
45
55
75
110
- 9 40 - 15
29
39
59
94
16
22
32
HTD 14M71 x 116 14M Clamp Type (O or B)
86 x 116 14M Clamp Type (O or B)
116 x 116 14M Clamp Type (O or B)
40
55
85
71
86
116
116 11 70 - 2251
66
96
7
ClampsHalf Clamps - AT- Series
a1 a
B m
Ld H
Standard Clamps (Metric pitches) - Used for connecting both belt ends
Clamp part description:B x L (belt pitch) Type (O or B)Type O = clamp with no holesType B = clamp with holes (shown)
Note: - Standard material is AL 6061- 5 teeth minimum engagement recommended at each belt end
AT10BAT10
BATK10
50
60
75
110
35
42
60
90
40 20 106.578
Half Clamp Dimensions - AT Series Metric
25
32
50
75
AT5
AT20
Belt Pitch Belt Widthb(mm) Part Description B
(mm)L
(mm)d
(mm)m
(mm)a
(mm)al
(mm)H
(mm)
50 x 78 [Pitch] Clamp Type (O or B)
60 x 78 [Pitch] Clamp Type (O or B)
75 x 78 [Pitch] Clamp Type (O or B)
110 x 78 [Pitch] Clamp Type (O or B)
50 x 58 AT5 Clamp Type (O or B)
60 x 58 AT5 Clamp Type (O or B)
75 x 58 AT5 Clamp Type (O or B)
110 x 58 AT5 Clamp Type (O or B)
50 x 98 AT20 Clamp Type (O or B)
60 x 98 AT20 Clamp Type (O or B)
75 x 98 AT20 Clamp Type (O or B)
110 x 98 AT20 Clamp Type (O or B)
25
32
50
75
25
32
50
75
50
60
75
110
50
60
75
110
58
98 9 60 20 20
5.5 30 15 10
35
42
60
90
ATS15BAT15
BATK15
50 x 88 [Pitch] Clamp Type (O or B)
60 x 88 [Pitch] Clamp Type (O or B)
75 x 88 [Pitch] Clamp Type (O or B)
110 x 88 [Pitch] Clamp Type (O or B)
25
32
50
75
50
60
75
110
88 9 50 20 20
35
42
60
90
35
42
60
90
8 Clamps and Tensioner Idlers
ClampsTensioning Clamp Options
AT5AT10AT20
ATL10ATL20
Tensioning Clamp Options
T5T10T20
25 32 50 75 100 150Belt Pitch
Belt Width (mm)
Type A-[1,2 or 3]
Type A-[1,2 or 3]
-
Type A-[1,2 or 3]
Type A-[1,2 or 3]
Type B-1
-
-
Type B-2
-
Type B-2
Type B-2
Type B-2
Type B-2
-
Type B-2
Type B-2
Type B-2
Type B-2
-
-
Type B-2
-
-
Type C
-
Type C
Type C
-
-
Type A-[1,2 or 3]
Type A-[1,2 or 3]
-
Type A-[1,2 or 3]
Type A-[1,2 or 3]
-
Type A-[1,2 or 3]
-
Type A-[1,2 or 3]
Type A-[1,2 or 3]
-
Type A-[1,2 or 3]
-
Type A-[1,2 or 3]
Type A-[1,2 or 3]
Type B-1
Type B-1
Type B-1
BATK10BATK15ATS15
-
-
-
Type A-[1,2 or 3]
-
-
Type A-[1,2 or 3]
Type B-1
Type B-1
Type B-2
Type B-2
Type B-2
Type B-2
Type B-2
Type B-2
-
-
Type C
Tensioning Clamps - Used to connect to one belt end and apply tension to the belt
Clamp Plate with Top Plate
Type A-1 without tensioning rodand holes - pg 9
Type A-2 with tensioning rod and slotted holes - pg 10
Type A-3 with tensioning rod and threaded holes - pg 11
Standard Tensioning Clamp Standard Tensioning Clamp
Interchangeable Tensioner Clamp
Type B-1 with tensioning rodand slotted holes - pg 12
Type B-2 with tensioning rodand slotted holes - pg 13
Type C with tensioning rodand slotted holes - pg 14
Interchangeable Tensioner Clamp High Load Tensioning Clamp
9
ClampsA-1 Clamp Assembly
Clamp Assembly Type A-1
Part description:B x L (belt pitch) Type A-1 clamp assembly
Note:- Standard material is AL 6061 - H = Overall thickness including belt
T1050
60
75
19.580
Clamp Assembly Type A-1
25
32
50
T5
Belt Pitch Belt Widthb(mm) Part Description B(mm) L(mm) H(mm)
50 x 80 T10 A-1 clamp assembly
60 x 80 T10 A-1 clamp assembly
75 x 80 T10 A-1 clamp assembly
AT1050
60
75
19.58025
32
50
50 x 80 AT10 A-1 clamp assembly
60 x 80 AT10 A-1 clamp assembly
75 x 80 AT10 A-1 clamp assembly
50 x 80 T5 A-1 clamp assembly
60 x 80 T5 A-1 clamp assembly
75 x 80 T5 A-1 clamp assembly
25
32
50
50
60
75
80 18.5
ATL10 50
6019.58025
32
ATL5
50 x 80 ATL10 A-1 clamp assembly
60 x 80 ATL10 A-1 clamp assembly
50 x 80 ATL5 A-1 clamp assembly
60 x 80 ATL5 A-1 clamp assembly
75 x 80 ATL5 A-1 clamp assembly
25
32
50
50
60
75
80 19.0
BATK1060 x 80 BATK10 A-1 clamp assembly
75 x80 BATK10 A-1 clamp assembly
32
50
60
7580 19.5
AT550 x 80 AT5 A-1 clamp assembly
60 x 80 AT5 A-1 clamp assembly
75 x 80 AT5 A-1 clamp assembly
25
32
50
80 19.0
50
60
75
10 Clamps and Tensioner Idlers
ClampsA-2 Clamp Assembly
Tensioning Clamp Type A-2
Tensioner part description:B x L (belt pitch) Type A-2 tension clamp
Note:- Standard material is AL 6061 with zinc-plated hardware- H = Overall thickness including belt- Specify running direction for BAT and BATK pitches per pg 14
T1050
60
75
11.2580
Clamp Assembly Type A-2
25
32
50
T5
Belt Pitch Belt Widthb(mm) Part Description B(mm) L(mm) M(mm) m(mm) H(mm)
50 x 80 T10 A-2 tension clamp
60 x 80 T10 A-2 tension clamp
75 x 80 T10 A-2 tension clamp
AT1050
60
75
11.258025
32
50
50 x 80 AT10 A-2 tension clamp
60 x 80 AT10 A-2 tension clamp
75 x 80 AT10 A-2 tension clamp
50 x 80 T5 A-2 tension clamp
60 x 80 T5 A-2 tension clamp
75 x 80 T5 A-2 tension clamp
25
32
50
50
60
75
38
46
62
38
46
62
80 10.25
ATL10 50
6011.008025
32
ATL5
50 x 80 ATL10 A-2 tension clamp
60 x 80 ATL10 A-2 tension clamp
50 x 80 ATL5 A-2 tension clamp
60 x 80 ATL5 A-2 tension clamp
75 x 80 ATL5 A-2 tension clamp
25
32
50
50
60
75
80 10.75
BATK1060 x 80 BATK10 A-2 tension clamp
75 x80 BATK10 A-2 tension clamp
32
50
60
7580 11.25
AT550 x 80 AT5 A-2 tension clamp
60 x 80 AT5 A-2 tension clamp
75 x 80 AT5 A-2 tension clamp
25
32
50
80 10.75
19.5
19.5
18.5
19.5
19.0
19.5
19.0
50
60
75
38
46
62
38
46
62
38
46
62
38
46
38
46
11
ClampsA-3 Clamp Assembly
Tensioning Clamp Type A-3
Tensioner part description:B x L (belt pitch) Type A-3 tension clamp
Note:- Standard material is AL 6061 with zinc-plated hardware- H = Overall thickness including belt- Specify running direction for BAT and BATK pitches per pg 14
T1050
60
75
11.2580
Clamp Assembly Type A-3
25
32
50
T5
Belt Pitch Belt Widthb(mm) Part Description B(mm) L(mm) M(mm) m(mm) H(mm)
50 x 80 T10 A-3 tension clamp
60 x 80 T10 A-3 tension clamp
75 x 80 T10 A-3 tension clamp
AT1050
60
75
11.258025
32
50
50 x 80 AT10 A-3 tension clamp
60 x 80 AT10 A-3 tension clamp
75 x 80 AT10 A-3 tension clamp
50 x 80 T5 A-3 tension clamp
60 x 80 T5 A-3 tension clamp
75 x 80 T5 A-3 tension clamp
25
32
50
50
60
75
38
46
62
38
46
62
80 10.25
ATL10 50
6011.008025
32
ATL5
50 x 80 ATL10 A-3 tension clamp
60 x 80 ATL10 A-3 tension clamp
50 x 80 ATL5 A-3 tension clamp
60 x 80 ATL5 A-3 tension clamp
75 x 80 ATL5 A-3 tension clamp
25
32
50
50
60
75
80 10.75
BATK1060 x 80 BATK10 A-3 tension clamp
75 x80 BATK10 A-3 tension clamp
32
50
60
7580 11.25
AT550 x 80 AT5 A-3 tension clamp
60 x 80 AT5 A-3 tension clamp
75 x 80 AT5 A-3 tension clamp
25
32
50
80 10.75
19.5
19.5
18.5
19.5
19.0
19.5
19.0
50
60
75
38
46
62
38
46
62
38
46
62
38
46
38
46
12 Clamps and Tensioner Idlers
ClampsB-1 and C Clamp Assembly
Tensioner part description:B x L (belt pitch) Type B-1 tension clamp
Note:- Standard material is AL 6061 with zinc-plated hardware- H = Overall thickness including belt
Tensioning Clamp Type B-1
AT20
Tensioning Clamp Type B-1
BATK15
T20
Belt Pitch Belt Widthb(mm) Part Description B(mm) L(mm) M(mm) m(mm) h(mm) H(mm)
90 x 180 T20 Type B-1 tension clamp
90 x 180 AT20 Type B-1 tension clamp
90 x 180 BATK15 Type B-1 tension clamp
50
50
50
90
90
70
70
70
180 20.5
ATL10ATL20
90 x 180 ATL10 Type B-1 tension clamp
90 x 180 ATL20 Type B-1 tension clamp
50
50
180
180
180
180
20.5
20.5
20.5
20.5
32
32
32
32
32
19.08
19.58
ATS15 90 x 180 ATS15 Type B-1 tension clamp50
90
90 70180 20.5 3219.38
19.80
18.68
19.08
90
90
70
70
Tensioning Clamp Type C
Tensioner part description:B x L (belt pitch) Type C tension clamp
Note:- Standard material is uncoated steel with zinc-plated hardware- Steel coatings optional- H = Overall thickness including belt
AT10AT20
Tensioning Clamp Type C
T20
Belt Pitch Belt Widthb(mm) Part Description B(mm) L(mm) M(mm) m(mm) h(mm) H(mm)
200 x 210 T20 Type C tension clamp
200 x 210 AT10 Type C tension clamp
200 x 210 AT20 Type C tension clamp
150
150
150
200
200
174
174
210 25.5
210 25.5
42
42
24.08
ATS15 200 x 210 ATS15 Type C tension clamp150 200
200
174
174
210
210
25.5
25.5
42
42
24.08
24.38
25.09
13
ClampsB-2 Clamp Assembly
Tensioner part description:B x L (belt pitch) Type B-2 tension clamp
Note:- Standard material is AL 6061 tooth plate, uncoated steel top plate and zinc-plated hardware- H = Overall thickness including belt- Specify running direction for BAT and BATK pitches per pg 14
Tensioning Clamp Type B-2
Tensioning Clamp Type B-2
T20
Belt Pitch Belt Widthb(mm) Part Description B
(mm)L
(mm)M
(mm)m
(mm)a
(mm)c
(mm)h
(mm)H
(mm)
120 x 180 T20 Type B-2 tension clamp
150 x 200 T20 Type B-2 tension clamp
75
100
AT10120 x 180 AT10 Type B-2 tension clamp
150 x 200 AT10 Type B-2 tension clamp
75
100
AT20120 x 180 AT20 Type B-2 tension clamp
150 x 200 AT20 Type B-2 tension clamp
75
100
ATL10120 x 180 ATL10 Type B-2 tension clamp
150 x 200 ATL10 Type B-2 tension clamp
75
100
ATL20120 x 180 ATL20 Type B-2 tension clamp
150 x 200 ATL20 Type B-2 tension clamp
75
100
BATK10120 x 180 BATK10 Type B-2 tension clamp
150 x 200 BATK10 Type B-2 tension clamp
75
100
BATK15120 x 180 BATK15 Type B-2 tension clamp
150 x 200 BATK15 Type B-2 tension clamp
75
100
ATS15120 x 180 ATS15 Type B-2 tension clamp
150 x 200 ATS Type B-2 tension clamp
75
100
120
150
180
200
97
124
19.5
25.5
65
72
29.5
35
18.08
24.08
33
42
120
150
180
200
97
124
19.5
25.5
65
72
29.5
35
19.09
25.09
33
42
120
150
180
200
97
124
19.5
25.5
65
72
29.5
35
18.08
24.08
33
42
120
150
180
200
97
124
19.5
25.5
65
72
29.5
35
18.80
24.80
33
42
120
150
180
200
97
124
19.5
25.5
65
72
29.5
35
17.68
23.68
33
42
120
150
180
200
97
124
19.5
25.5
65
72
29.5
35
19.09
25.09
33
42
120
150
180
200
97
124
19.5
25.5
65
72
29.5
35
18.58
24.58
33
42
120
150
180
200
97
124
19.5
25.5
65
72
29.5
35
18.38
24.38
33
42
14 Clamps and Tensioner Idlers
ClampsAppendix
Tensioning Clamp Installation Notes
BAT and BATK Orientation
Custom clamps machined to print are available in various materials and surface finishes. Custom clamps modified from stock AL 6061, extruded clamps are available in as little as 8 days. Submit drawings or technical specifications to Applications Engineering for quotations.
Running direction must be specified for BAT and BATK pitches as follows:
Right-hand orientation Left-hand orientation
Right-hand orientationLeft-hand orientation
Plate at least 5 belt teeth into the clamp to achieve maximum strength. Bolt the clamp plates together sandwiching the belt. Refer to tensioner diagram for recommended initial tightening torque for the countersunk screws. Place the threaded tensioning rod through a hole on a mounted fixture. By tightening a nut on the threaded rod the tensioning clamp will pull the belt and apply tension. Refer to catalog B207 pg. 5 or the online calculator for recommended pretension. After applying the proper tension, install and tighten the 4 mounting bolts in their slotted adjustment holes to keep the clamp in position. Refer to tensioner diagram for recommended tightening torque for the cap screws and final torque for any countersunk screws. By doing this, the pressure will be relieved on the threaded rod. Properly mounted tensioning clamps transfer all of the forces onto the mounted bolts and do not rely on the threaded rod.
15
Tensioner IdlersSolutions for Fixed Center-Drives
All timing belt drives require some form of tension adjustment. Tensioner idlers are a common way to provide this adjustment while maintaining fixed centers for the remaining pulleys. Placement of the tensioner may be on the belt back or tooth side provided that minimum recommended diameters are observed. Tensioner idlers may also be used to route the belt in a drive or increase wrap on a small pulley for higher power transmission capability.
Back Bending Idler - Also known as Contra-flexure. Typically used to increase belt wrap on the drive pulley. Refer to appendix for minimum recommended pulley and idler sizes. Diameter recommendations differ for forward and back bending.
Tooth Sided Idler - Used for tensioning adjustment or routing belt. Idler may be flat or toothed type.
Standard material is a steel shaft and bearings with aluminum housing and flanges. Custom tensioner idlers or materials are available as modified items for small quantities and custom items for large quantities. Permanently greased bearings are used with max continuous temperature of 160° F and intermittent 240° F.
Application Examples for tensioner idlers:
16 Clamps and Tensioner Idlers
Tensioner IdlersEccentric Adjustment Tensioners
Compact integrated tensioning design
Type B/E0 Eccentric without flanges
Type B/E2 Eccentric with flanges
Part description:-B/E0 B/D-0 Tensioner- B = Face width- D = Outside diameter
Part description:-B/E2 B/D-2 Tensioner- B = Face width- D = Outside diameter
Eccentric Adjustment Tensioner - Dimensions
34406440649040647090406490
326060808080120120120120150150150
25325032507532505075325075
41.57171919191
132132137137162162162
4250745074
110507485
1105074
110
5555555555555
M6M12M12M12M12M20M12M12M20M20M12M12M20
10202020203220203032202032
20303030304530304545303045
17272727273627273636272736
7950193001930019300193004800019300193007050048000193001930048000
3920131001310013100131003800013100131004800038000131001310038000
10000500050005000500050005000500050005000500050005000
B(mm)
D(mm)
Max BeltWidth(mm)
dB(mm)
B2(mm)
E(mm) G †
(mm)D1
(mm)SW
(mm)
AllowableLoading
Dynamic (N) Static (N)Max RPM
17
Tensioner Idlers3-Bolt Fixed Mount Tensioners
May be mounted in slots or on an arm for adjustment
Type B/E0 Fixed mount without flanges
Type B/F2 Fixed mount with flanges
Part description:-B/F0 B/D-0 Tensioner- B = Face width- D = Outside diameter
Part description:-B/F2 B/D-2 Tensioner- B = Face width- D = Outside diameter
Fixed Mount Tensioner - Dimensions
11411470901177090117
6080120120120180180180
1001005075
1005075
100
7191
137137137204204204
12412485
11013185
110131
3434656565658080
M8M8M12M12M12M12M16M16
1515242424252525
4545858585106106106
193001930070500705007050070500106000106000
1310013100480004800048000480007600076000
50005000500050005000500050005000
B(mm)
D(mm)
Max BeltWidth(mm)
dB(mm)
B2(mm)
K(mm) G †
(mm)D1
(mm)
AllowableLoading
Dynamic (N) Static (N)Max RPM
18 Clamps and Tensioner Idlers
Tensioner IdlersToothed Eccentric Tensioners
For the smoothest running on the inside of the belt
Type B/E0 Eccentric mount without flanges
Part description:-B/E0 AL B Pitch/Z-0 Tensioner- B = Face width- Z = Number of teeth specify left or right rotation for BAT/BATK pitches
Toothed Eccentric Tensioner - Dimensions
34406434406440644064
T5T10T10AT5AT10AT10
BAT10BAT10
BATK10BATK10
22202022202020202424
25355025325032503250
34.1561.8061.8033.7961.8461.8461.8461.8474.5774.57
42507442507450745074
5555555555
M6M12M12M6
M12M12M12M12M12M12
10202010202020202020
20303020303030303030
17272717272727272727
795019300193007950193001930019300193001930019300
392013100131003920131001310013100131001310013100
30000300001500015000150001500015000150001500015000
B(mm) Pitch
Numberof
Teeth
MaxBelt
Width(mm)
dK(mm)
B2(mm)
E(mm) G †
(mm)D1
(mm)SW
(mm)
AllowableLoading
Dynamic (N) Static (N)
MaxRPM
19
For more information please visit us at www.brecoflex.com
Tensioner IdlersAppendix
Minimum number of pulley teeth and idler diameter
T2
T2.5
T5
T10
T20
AT3
AT5
AT10
ATS15
AT20
ATN10
ATN12.7
ATN20
ATL5
ATL10
ATL20
ATP10
ATP15
MXL
XL
L
10
15
10
12
15
15
15
15
25
18
25
20
20
25
25
25
15
20
10
10
15
15
15
30
60
120
30
25
50
120
120
80
80
125
40
80
160
50
100
15
30
60
15
18
30
60
120
30
60
120
250
180
-
-
-
60
150
250
120
160
15
30
60
18
18
15
20
25
25
20
25
40
25
-
-
-
25
25
25
25
30
18
15
20
H
XH
BAT10
BATK10
BAT15
BATK15
SFAT10
SFAT15
SFAT20
TK5K6
TK10K6
TK10K13
TK20K13
ATK5K6
ATK10K6
ATK10K13
ATK20K13
ATN10K6
ATN12.7K6
HK13
LK13
14
18
20
20
20
20
15
20
18
25
25
25
18
25
25
20
20
25
20
18
25
20
25
25
25
30
30
25
25
25
25
25
25
25
25
25
25
25
-
-
20
25
60
150
60
60
100
100
50
100
120
60
60
80
120
60
60
60
120
80
80
80
80
80
180
120
120
150
150
120
150
180
80
80
120
180
80
120
120
180
-
-
120
80
Pitch(mm)
ApplicationMin. # of Pulley Teeth
(no back bending)Min. # of Pulley Teeth(with back bending)
Min. Diameter ofFlat Idler running on
tooth side (mm)
Min. Diameter ofFlat Idler running on
belt back (mm)
Pitch(mm)
Min. # of Pulley Teeth(no back bending)
Min. # of Pulley Teeth(with back bending)
Min. Diameter ofFlat Idler running on
tooth side (mm)
Min. Diameter ofFlat Idler running on
belt back (mm)
Application
ISO 9001 CERTIFIED COMPANY
flex CO., L.L.C. • BRECO®, BRECOFLEX® & ATN® are registered trademarks of BRECO Antriebstechnik GmbH • ARC-POWER® is a registered trademark of BRECOflex CO., L.L.C. • Kevlar® is a registered
trademark of DuPont Patents Pending • ESBAND® is a registered trademark of Max Schlatterer GmbH & Co. KG Patents Pending. Specifications are subject to change without prior notice.
All recommendations f or t he use of t he p roducts described herein and a ll o ther data or i nformation set f orth i n this publication, whether concerning such products o r otherwise, a re f urnished without any guarantee, warranty representations or inducement of any kind whether expressed or implied, including but not limited to warranties of merchantability and fitness for a particular purpose. BRECOflex CO., L.L.C. expressly disclaims liability under any theory, including without limitation, contract negligence, misrepresentation or breach of any obligation relating to the recommendation, data or information set forth herein. Readers and customers are encouraged to conduct their own test before using any product. Read its label and all related instructions. BRECOflex CO., L.L.C. reserves the right to make changes in the technical and dimensional specifications of its products without prior notice. Responsibility for expenses incurred as a result of product changes or discontinuance of a product lies solely with the purchaser.
Prin
ted:
09/
19
Copyright 2019 BRECO
Contact Us
222 Industrial Way West, Eatontown, NJ 07724Tel: 732-460-9500 • Fax: 732-542-6725
www.brecoflex.com • email: [email protected]
Regional Sales Offices:Atlanta Bay Area Baltimore Boston Buffalo Charlotte Chicago Cincinnati Cleveland
DallasDenverDetroitFt.WayneGrand RapidsHoustonIndianapolisLas VegasLos Angeles
MiamiMilwaukeeMinneapolisNashvilleNew YorkPhiladelphiaPhoenixPortlandPittsburgh
RichmondSeattleSalt lake CitySan AntonioToledoTorontoMexico CityMonterreyGuadalajara
(770)317-8745(661)713-0121(804)387-5760(603)496-5833(412)600-5632(908)461-3937(908)461-6995(908)461-2344(412)600-5632
(214)476-5650(303)470-7226(908)433-0036(908)461-1168(908)461-1168(214)476-5650(908)461-2344(480)961-3846(661)713-0121
(770)317-8745(908)461-6995(908)461-6973(732)757-6647(732)829-7773(732)829-7773(480)961-3846(503)781-3631(412)600-5632
(804)387-5760(503)781-3631(303)470-7226(214)476-5650(908)433-0036(416)476-7107+52 1 55 45335835+52 1 55 40840778+52 1 55 40949053