• HYDRAULIC HAMMER / ROCK - CONCRETE BREAKER• HYDRAULIC PEDESTAL BREAKER ( BOOM BREAKER )• HYDRAULIC CRUSHER• HYDRAULIC MINI CRUSHER• HYDRAULIC PULVERIZER• HYDRAULIC SHEAR• HYDRAULIC MINI SHEAR• HYDRAULIC DEMOLITION• HYDRAULIC VIBRATING PLATE COMPACTOR• HYDRAULIC QUICK COUPLER / HITCH / LINK• HYDRAULIC GRAB / GRAPPLE• HYDRAULIC CORE DRILL• HYDRAULIC ROCK SPLITTER• HYDRAULIC PILE DRIVER• HYDRAULIC FORKLIFT - ATTACHMENTS• SPARE PARTS OF HYDRAULIC HAMMERS / BREAKERS• SPARE PARTS OF CONSTRUCTION & EARTHMOVING MACHINERY• USED / NEW CONSTRUCTION & EARTHMOVING MACHINERY

SOLUTION TO DEMOLITION

www.hammerking.comHAMMERKING

Headquarters & Sales Office Address : Room No. 403, 4th Floor, Innam Building, 301-1, Nam-Gu, Sungui-Dong, Inchon City, SOUTH KOREA ( R.O.K ) / Zip Code : 402-012TEL : ++82-32-422-8370 (Rep.) / ++82-32-888-8646 (Rep.)FAX : ++82-32-422-8372 (Rep.) / ++82-32-888-8647 (Rep.)MSN : poqutec@hotmail.comSKYPE : song5105 or poqutecE-mail : pqt@poqutec.com hammer@poqutec.com poqutec@hotmail.comURL : www.hammerking.com www.poqutec.com www.worldhammer.com Factory Noha-Ri, Paltan-Myeon, Hwaseong City, Kyunggi-Do, SOUTH KOREA ( R.O.K )TEL : ++82-32-888-8655 (Rep.)FAX : ++82-32-888-8647 (Rep.)

POQUTEC’s International Warehouse & After Sales Service CenterPlease contact POQUTEC Headquarters & Main Sales Office in SOUTH KOREA

Rev 20130117All Copy Rights Reserved to POQUTEC CO., LTD.

HKB HYDRAULIC HAMMER / BREAKER " PBV " OPEN HOUSING TYPE

OTHER HYDRAULIC ATTACHMENT

PBV 10

PBV 80 BHL

PBV 175

PBV 20

PBV 80 JCB

PBV 180 (A)

PBV 90

PBV 200

PBV 30

PBV 100

PBV 210 (A)

PBV 30 SKL

PBV 130

PBV 300

PBV 50

PBV 150

PBV 400

PBV 50 BHL

PBV 170

PBV 420

TECHNICAL SPECIFICATION OF POQUTEC’S HKB BREAKER / HAMMER

CHARACTERISTICS OF HKB HYDRAULIC BREAKERS / HAMMERS

HKB HYDRAULIC BREAKER / HAMMER" PBS & PBS - Ⅱ" SILENCE BOX HOUSING TYPE

▒ Exploded View of Box Bracket of PBS-Ⅱ ▒ BLANK FIRING -FREE ▒ SPECIAL CHARACTERISTICS OF HAMMERKING “ HKB ”SILENCE BOX HOUSING HAMMER / BREAKER1. BLANK FIRING ( IDLE STRIKING ) - FREE2. BOTTOM BUFFER ( BASE BUFFER ) - FREE3. “ T “ SHAPING STRENGTHENED BOTTOM BUSH ( FRONT COVER / TOOL BUSH )4. VERY FAST AND VERY CONVENIENT REPLACEMENT OF BOTTOM BUSH ( FRONT COVER / TOOL BUSH )5. MUCH BETTER PROTECTION OF THE TOOL ( CHISEL, BLUNT, MOIL, CONE, ANVIL )6. LOWER WORKING NOISE => SILENCE BOX TYPE7. FOUR (4) ANGLES WELDING HOUSING / BRACKET8. UNDER WATER SYSTEM9. AUTOMATIC GREASING ( LUBRICATION ) SYSTEM10. DIVERSIFIED CHOISE WITH 1) “ PB “ SERIES => GAS & HYDRAULIC OIL PRESSURE TYPE => INNER CONTROL VALVE 2) “ PB “ SERIES => GAS & HYDRAULIC OIL PRESSURE TYPE => OUTER CONTROL VALVE 3) “ HKB “ SERIES => 100 % HYDRAULIC OIL PRESSURE TYPE11. APPLICATION OF THE SPECIAL STEEL MATERIAL FOR TOOL ( CHISEL, BLUNT, MOIL, CONE, ANVIL ) => OPTIONAL 1) VERY STRONG AGAINST FRICTION12. MADE OF NO. 1 QUALIFIED SOUTH KOREAN STEEL MATERIAL AND SOUTH KOREAN SPARE PARTS13. PROCESSED WITH THE SUPERIOR HEAT TREATMENT IN SOUTH KOREA

▒ AUTO LUBRICATION / GREASING SYSTEM

▒ REPLACEMENT OF BOTTOM BUSH / FRONT COVER

▒ UNDER - WATER SYSTEM

▒ OIL FLOW METER

CONE

BLUNT

CHISEL

MOIL

SMALL TYPE

MODEL OF HAMMER / BREAKER SPECIFICATION

PBS 10 PBS 20 PBS 30 PBS 50 PBS 80 PBS 90 PBS 100

WEIGHT OF CARRIERS TON 0.5 ~ 1.5 0.8 ~ 3.0 1.5 ~ 4.5 3.5 ~ 7.0 4.0 ~ 10.0 8.0 ~ 12.0 9.0 ~ 16.0

APPLICABLE LBS 1,102 ~ 3,307 1,764 ~ 6,614 3,307 ~ 9,921 7,716 ~ 15,432 8,818 ~ 22,046 17,637 ~ 26,455 19,841 ~ 35,273

RANGE OF BUCKET M3 BELOW 0.07 0.03 ~ 0.10 0.06 ~ 0.20 0.15 ~ 0.30 0.20 ~ 0.35 0.30 ~ 0.50 0.45 ~ 0.60

WORKING / OPERATING WEIGHT( OF HAMMER / BREAKER )

KGS 117 164 189 348 437 685 930

OIL SUPPLYLPM ( L/MIN ) 15 ~ 25 20 ~ 30 25 ~ 40 30 ~ 45 45 ~ 85 45 ~ 85 80 ~ 100

GPM 3.96 ~ 6.60 5.28 ~ 7.92 6.60 ~ 10.56 7.92 ~ 11.88 11.88 ~ 22.4 11.88 ~ 22.44 21.12 ~ 26.40

RELIEF / SETTING PRESSURE ( OF CARRIERS )

KG/CM2 150 150 160 170 170 195 210

PSI 2,135 2,135 2,277 2,420 2,420 2,775 2,989

OPERATING PRESSURE(OF HAMMER / BREAKER )

KG/CM2 80 ~ 110 80 ~ 110 90 ~ 120 95 ~ 130 100 ~ 130 130 ~ 150 150 ~ 170

PSI 1,139 ~ 1,566 1,139 ~ 1,566 1,281 ~ 1,708 1,352 ~ 1,850 1,423 ~ 1,850 1,850 ~ 2,135 2,135 ~ 2,420

IMPACT / STRIKING FREQUENCY BPM 700 ~ 1,490 650 ~ 1,450 550 ~ 1,250 490 ~ 950 450 ~ 950 450 ~ 900 430 ~ 900

DIAMETER OF HOSE( IN & OUT - LINE HOSE )

IN-LINE - MM ( INCH ) 12.700 ( 0.500 ) 12.700 ( 0.500 ) 12.700 ( 0.500 ) 12.700 ( 0.500 ) 12.700 ( 0.500 ) 19.050 ( 0.750 ) 19.050 ( 0.750 )

OUT-LINE - MM ( INCH) 12.700 ( 0.500 ) 12.700 ( 0.500 ) 12.700 ( 0.500 ) 12.700 ( 0.500 ) 12.700 ( 0.500 ) 19.050 ( 0.750 ) 19.050 ( 0.750 )

SPECIFICATION OFTOOL / ROD / CHISEL

DIAMETER - MM ( INCH ) 40 ( 1.572 ) 45 ( 1.769 ) 53 ( 2.083 ) 68 ( 2.672 ) 75 ( 2.948 ) 85 ( 3.340 ) 100 ( 3.930 )

LENGTH - MM ( INCH) 400 ( 15.720 ) 500 ( 19.650 ) 580 ( 22.790 ) 700 ( 27.510 ) 750 ( 29.475 ) 800 ( 31.440 ) 1,000 ( 39.300 )

N2 GAS CHARGING PRESSUREBACK HEAD ( KG/CM2 ) 17 17 17 17 17 17 17

ACCUMULATOR ( KG/CM2 ) N/A N/A N/A N/A N/A N/A N/A

OIL TEMPERATURE - 40 ~ + 80

OPTIONAL SYSTEM ( NOT, FREE )

UNDER WATER AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE

ACCUMULATOR WITHOUT WITHOUT WITHOUT WITHOUT WITHOUT WITHOUT WITHOUT

BLANK FIRING - FREE N/A N/A N/A N/A N/A N/A OPTIONAL

AUTO LUBRICATION AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE

MEDIUM TYPE

MODEL OF HAMMER / BREAKER SPECIFICATION

PBS 130 PBS 150 PBS 170 ( A ) PBS 175 ( A ) - II PBS 180 ( A ) - II PBS 200 - II

WEIGHT OF CARRIERS TON 10.0 ~ 17.0 12.0 ~ 18.0 12.0 ~ 20.0 16.0 ~ 22.0 18.0 ~ 25.0 18.0 ~ 26.0

APPLICABLE LBS 22,046 ~ 37,477 26,455 ~ 39,683 26,455 ~ 44,092 35,273 ~ 48,501 39,683 ~ 55,145 39,683 ~ 57,319

RANGE OF BUCKET M3 0.50 ~ 0.65 0.65 ~ 0.70 0.65 ~ 0.70 0.60 ~ 0.80 0.70 ~ 0.80 0.70 ~ 0.80

WORKING / OPERATING WEIGHT( OF HAMMER / BREAKER )

KGS 960 1,278 1,414 / 1,444 1,581 / 1,611 1,846 / 1,876 1,795

OIL SUPPLYLPM ( L/MIN ) 80 ~ 100 90 ~ 120 90 ~ 120 100 ~ 150 100 ~ 150 125 ~ 150

GPM 21.12 ~ 26.40 23.76 ~ 31.68 23.76 ~ 31.68 26.4 ~ 39.6 26.4 ~ 39.6 33.0 ~ 39.60

RELIEF / SETTING PRESSURE( OF CARRIERS )

KG/CM2 210 210 210 220 220 220

PSI 2,989 2,989 2,989 3,131 3,131 3,131

OPERATING PRESSURE(OF HAMMER / BREAKER )

KG/CM2 150 ~ 170 150 ~ 170 150 ~ 170 160 ~ 180 160 ~ 180 160 ~ 180

PSI 2,135 ~ 2,420 2,135 ~ 2,420 2,135 ~ 2,420 2,277 ~ 2,562 2,277 ~ 2,562 2,277 ~ 2,562

IMPACT / STRIKING FREQUENCY BPM 430 ~ 900 400 ~ 900 400 ~ 900 400 ~ 850 400 ~ 800 400 ~ 800

DIAMETER OF HOSE( IN & OUT - LINE HOSE )

IN-LINE - MM ( INCH ) 19.050 ( 0.750 ) 19.050 ( 0.750 ) 25.400 ( 1 ) 25.400 ( 1 ) 25.400 ( 1 ) 25.400 ( 1 )

OUT-LINE - MM ( INCH) 19.050 ( 0.750 ) 19.050 ( 0.750 ) 25.400 ( 1 ) 25.400 ( 1 ) 25.400 ( 1 ) 25.400 ( 1 )

SPECIFICATION OFTOOL / ROD / CHISEL

DIAMETER - MM ( INCH ) 108 ( 4.244 ) 120 ( 4.716 ) 125 ( 4.913 ) 130 ( 5.109 ) 135 ( 5.306 ) 135 ( 5.306 )

LENGTH - MM ( INCH) 1,000 ( 39.300 ) 1,100 ( 43.230 ) 1,100 ( 43.230 ) 1,200 ( 47.160 ) 1,200 ( 47.160 ) 1,200 ( 47.160 )

N2 GAS CHARGING PRESSUREBACK HEAD ( KG/CM2 ) 17 6 17 17 15 6

ACCUMULATOR ( KG/CM2 ) N/A 60 OPTIONAL 60 60 60

OIL TEMPERATURE - 40 ~ + 80

OPTIONAL SYSTEM ( NOT, FREE )

UNDER WATER AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE

ACCUMULATOR WITHOUT WITH OPTIONAL OPTIONAL OPTIONAL WITH

BLANK FIRING - FREE OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL

AUTO LUBRICATION AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE

LARGE TYPE

MODEL OF HAMMER / BREAKER SPECIFICATION

PBS 210 ( A ) - II PBS 300 - II PBS 400 - II PBS 420 - II PBS 500 PBS 1000

WEIGHT OF CARRIERS TON 18.0 ~ 28.0 27.0 ~ 35.0 35.0 ~ 50.0 37.0 ~ 55.0 45.0 ~ 60.0 50.0 ~ 80.0

APPLICABLE LBS 39,683 ~ 61,729 58,524 ~ 77,161 77,161 ~ 110,230 81,570 ~ 121,253 99,207 ~ 132,276 110,230 ~ 176,368

RANGE OF BUCKET M3 0.80 ~ 0.90 1.00 ~ 1.20 1.20 ~ 1.40 1.40 ~ 1.80 1.35 ~ 2.20 1.40 ~ 3.50

WORKING / OPERATING WEIGHT( OF HAMMER / BREAKER )

KGS 1,976 / 2,006 2,253 2,989 2,979 3,956 5,414

OIL SUPPLYLPM ( L/MIN ) 125 ~ 150 160 ~ 190 190 ~ 250 190 ~ 250 210 ~ 290 210 ~ 300

GPM 33.0 ~ 39.60 42.24 ~ 50.16 50.16 ~ 66.00 50.16 ~ 66.00 55.44 ~ 76.56 55.44 ~ 79.20

RELIEF / SETTING PRESSURE ( OF CARRIERS )

KG/CM2 220 220 220 220 220 220

PSI 3,131 3,131 3,131 3,131 3,131 3,131

OPERATING PRESSURE(OF HAMMER / BREAKER )

KG/CM2 160 ~ 180 160 ~ 180 160 ~ 180 160 ~ 180 160 ~ 180 160 ~ 180

PSI 2,277 ~ 2,562 2,277 ~ 2,562 2,277 ~ 2,562 2,277 ~ 2,562 2,277 ~ 2,562 2,277 ~ 2,562

IMPACT / STRIKING FREQUENCY BPM 400 ~ 750 350 ~ 750 300 ~ 600 300 ~ 600 250 ~ 500 310 ~ 450

DIAMETER OF HOSE( IN & OUT - LINE HOSE )

IN-LINE - MM ( INCH ) 25.400 ( 1 ) 25.400 ( 1 ) 31.750 ( 1.250 ) 31.750 ( 1.250 ) 31.750 ( 1.250 ) 31.750 ( 1.250 )

OUT-LINE - MM ( INCH) 25.400 ( 1 ) 25.400 ( 1 ) 31.750 ( 1.250 ) 31.750 ( 1.250 ) 31.750 ( 1.250 ) 31.750 ( 1.250 )

SPECIFICATION OFTOOL / ROD / CHISEL

DIAMETER - MM ( INCH ) 140 ( 5.502 ) 150 ( 5.895 ) 155 ( 6.092 ) 160 ( 6.289 ) 175 ( 6.876 ) 190 ( 7.465 )

LENGTH - MM ( INCH) 1,300 ( 51.090 ) 1,300 ( 51.090 ) 1,400 ( 55.020 ) 1,400 ( 55.020 ) 1,600 ( 62.890 ) 1.700 ( 66,820 )

N2 GAS CHARGING PRESSUREBACK HEAD ( KG/CM2 ) 15 6 17 8.5 15 10.5

ACCUMULATOR ( KG/CM2 ) 60 60 60 60 60 60

OIL TEMPERATURE - 40 ~ + 80

OPTIONAL SYSTEM ( NOT, FREE )

UNDER WATER AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE

ACCUMULATOR OPTIONAL WITH WITH WITH WITH WITH

BLANK FIRING - FREE OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL

AUTO LUBRICATION AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE AVAILABLE

PBS 10

PBS 80

PBS 200 -Ⅱ

PBS 20

PBS 90

PBS 210 (A) -Ⅱ

PBS 30

PBS 100

PBS 300 -Ⅱ

PBS 30 SKL

PBS 130

PBS 400 -Ⅱ

PBS 50

PBS 150

PBS 420 -Ⅱ

PBS 50 BHL

PBS 170

PBS 500

PBS 80 BHL

PBS 180 (A) -Ⅱ

PBS 1000

Bottom Buffer - FREE