Solution for Cellular Phone coverage - Home Page - Ripetitori GSM UMTS...
Transcript of Solution for Cellular Phone coverage - Home Page - Ripetitori GSM UMTS...
Solution for Cellular Phone coverage AIR Repeater™ RF/RF 2G/3G/4G
Distributore per l’Italia: PROTEL s.a.s. – www.protel.it – tel.: 0248600265 285 – AIR Repeater™ RF/RF 2G-3G-4G – ed10
Quality Model FP1004D / ed 27 / 07 / 2011
To ensure 2G, 3G, 4G coverage everywhere The AIR Repeater™ RF/RF Cellular family is designed to enhance outdoor coverage by cell extension as a cost-effective alternative to a BTS, and indoor coverage such as parking, conference rooms, shopping centers, tunnels, building with a DAS (Distributed Antenna System). This range of repeater is extremely modular, and can be equipped with the latest technology:
- Available in band- or channel-selective with the optional “Digital Smart Filter” that permits to treat up to 4 sub-bands
- “Advanced Insulation” algorithm, which permits to reduce up to 25 dB the constraints of insulation between RX & TX antennas
- Built in IP65 cabinet for wall- or mast-mounted indoor and outdoor installations
- Outdoor power available in medium or high power to optimize the link budget
Thanks to the gain limiter, the equipment is able to operate with mobile phones near or far from the repeater without risk of saturation. The low consumption of repeater allows the using of solar panels. Many options are listed:
- Embedded monitoring module with WEB/SNMP server for local access (Ethernet) and GPRS modem for remote access
- Cloud Monitoring with VisiOmc™ server - Power supply 230VAC or 48VDC - GFCI, Lightning Protection Class, Automatic restarter, etc…
Application
• 2G, 3G, 4G standards
• Indoor & Outdoor
coverage enhancement
Key Features
• Medium & High Power
• Single or Dual-Band
• Band- & Channel-
Selective
• Digital Smart Filter
• Advanced Insulation
• Outdoor IP65 cabinet
• HTTP, SNMP Monitoring
Benefits
• Cost effective alternative
to BTS
• Low consumption for solar
application
• To be installed by skilled
personnel
Contact us
Distributore per l’Italia :
PROTEL SAS Via Magellano 3 A/B6 Cesano Boscone (MI) Tel.: 02 48 60 02 65
Solution for Cellular Phone coverage AIR Repeater™ RF/RF 2G/3G/4G
Distributore per l’Italia: PROTEL s.a.s. – www.protel.it – tel.: 02 48600265 - 285 – AIR Repeater™ RF/RF 2G-3G-4G – ed10 Quality Model FP1004D / ed 27 / 07 / 2011
Example of outdoor application
BTS
AIR Repeater™
Example coverage of small rail tunnel
BTS
AIR Repeater™
Example coverage of a building and an underground parking
BTS
Câble coaxial /Coaxial cable
AIR Repeater™
Solution for Cellular Phone coverage AIR Repeater™ RF/RF 2G/3G/4G
Distributore per l’Italia: PROTEL s.a.s. – www.protel.it – tel.: 02 48600265 - 285 – AIR Repeater™ RF/RF 2G-3G-4G – ed10 Quality Model FP1004D / ed 27 / 07 / 2011
RF Features 800 900 1800 1900 2100 2600
Down-Link (TX) 791~821 MHz
925~960 MHz
1805~1880 MHz
1930~1990 MHz
2110~2170 MHz
2620~2690 MHz Frequency
band Up-Link (RX) 832~862 MHz
880~915 MHz
1710~1785 MHz
1850~1910 MHz
1920~1980 MHz
2500~2570 MHz
Single-Band Medium Power
= 32 dBm = 29 dBm
Single-Band High Power
= 39 dBm = 37 dBm
Nominal output composite power DL(1)
Dual Band Per band
= 32 dBm = 29 dBm
Single-Band Medium Power
= 15 dBm
Single-Band High Power
= 20 dBm
Nominal output composite power UL Dual Band
Per band = 15 dBm
Max Bandwidth = 30 MHz = 35 MHz = 75 MHz = 60 MHz = 60 MHz = 70 MHz Operating bandwidth Central frequency Adjustable
Single-Band Medium Power
Adjustable from 50 dB to 80 dB
Single-Band High Power
Adjustable from 60 dB to 90 dB Gain
Dual Band Per band
Adjustable from 50 dB to 80 dB
Ripple in bandwidth = ± 2 dB
Noise factor @ Max Gain = 5 dB = 6 dB = 5 dB
Selectivity 30 dB @ ± 350 KHz 45 dB @ ± 1.1 MHz 55 dB @ ± 10 MHz
Adjacent LTE channel rejection out of bandwidth
= 70 dBc
Duplex Mode LTE FDD (Frequency Division Duplexing)
Intermodulation = -36 dBm @ = 1 GHz = -30 dBm @ > 1 GHz
Absolute group delay = 6 µs
Delta group delay = 15 ns
Conformity ETSI TS 25 106 V11.0.1 (2012-10) ETSI TS 25 143 V11.0.0 (2012-10)
(1) for a PAR (Peak Average Ratio) = 8.5 dBc
Solution for Cellular Phone coverage AIR Repeater™ RF/RF 2G/3G/4G
Distributore per l’Italia: PROTEL s.a.s. – www.protel.it – tel.: 02 48600265 - 285 – AIR Repeater™ RF/RF 2G-3G-4G – ed10 Quality Model FP1004D / ed 27 / 07 / 2011
Digital Smart Filter Module (optional)
Number of rejection filters 4
Bandwidth Adjustable from 0 to Max. Bandwidth
Central frequency Adjustable from f0 to f0 + (Max. Bandwidth / 2) For each filter
Attenuation Adjustable from 0 dB to 30 dB
Screen of Setting Software
Because the output power of a repeater is composite, the unwanted carriers have sometimes to be eliminated to use the complete dynamic of gain for the useful carriers. The Digital Smart Filter permits to select the carriers to repeat with a specific mask filter, easy to program thanks to the provided software.
Repeater
BTS
Input signal Output signal Digital Signal Processing: Sub-band filtering
f f f
P P P
Solution for Cellular Phone coverage AIR Repeater™ RF/RF 2G/3G/4G
Distributore per l’Italia: PROTEL s.a.s. – www.protel.it – tel.: 02 48600265 - 285 – AIR Repeater™ RF/RF 2G-3G-4G – ed10 Quality Model FP1004D / ed 27 / 07 / 2011
Echo-Cancellation
Features OFF ON Isolation benefit
Power supply voltage = Gain + 15 dB = Gain - 10 dB 25 dB
Group delay = 4.5 µs
In case of low isolation between the RX and TX antennas, the echo signal from the TX antenna into the RX antenna causes the famous LARSEN effect. The result is the emergence of a ripple at the input of the repeater. If this ripple is too important, the dynamic of gain of the repeater is limited to avoid the destruction of the device. The Echo-Canceller algorithm permits to reduce up to 25 dB the constraints of isolation between RX & TX antennas, to use the repeater with its complete dynamic of gain. The Echo-Canceller option is available for UMTS and LTE modulations.
BTS
Repeater RX antenna
Isolation
TX antenna
Solution for Cellular Phone coverage AIR Repeater™ RF/RF 2G/3G/4G
Distributore per l’Italia: PROTEL s.a.s. – www.protel.it – tel.: 02 48600265 - 285 – AIR Repeater™ RF/RF 2G-3G-4G – ed10 Quality Model FP1004D / ed 27 / 07 / 2011
Mechanical Features 800 900 1800 1900 2100 2600
Power supply voltage 230 VAC or 48 DC (IEC 60950 accordance)
Single Band
Medium Power = 100 W
Single Band
High Power = 180 W = 140 W
Power consumption
Dual Band
Medium Power = 230 W
Single Band
Medium Power H582 x L429 × D224 mm
Single Band
High Power H582 × L444 × D353 mm Dimensions
Dual Band
Medium Power H582 × L444 × D353 mm
Single Band
Medium Power 28 Kg
Single Band
High Power 49 Kg Weight
Dual Band
Medium Power 49 Kg
Connectors 7/16 female
Rating class / Ingress protection IP65 / IK9
ATEX Protection (optional) ATmosphere Explosive certified
Temperature range -30°C to +45°C
Cooling Air convection cooling
Signaling One tricolor led (Green / Yellow / Red) + 1 Dry Loop
Remote control (optional) With embedded monitoring module : Ethernet / GPRS / HTTP / SNMP
Alarms report : By email / SMS / Trap
Solution for Cellular Phone coverage AIR Repeater™ RF/RF 2G/3G/4G
Distributore per l’Italia: PROTEL s.a.s. – www.protel.it – tel.: 02 48600265 - 285 – AIR Repeater™ RF/RF 2G-3G-4G – ed10 Quality Model FP1004D / ed 27 / 07 / 2011
Mounting Plan
Ordering Information
Ordering Code
Single-Band: AIRREP-P-F-BW-DSF-AIR-PS-MTG-G-AR-LP-ATEX Dual-Band: AIRREP-P-F1-BW1-DSF1-AIR1-F2-BW2-DSF2-AIR2-PS-MTG-G-AR-LP-ATEX
Variable Designation Value Meaning Variable Designation Value Meaning
MP Medium Power F With P = Output
Power HP High Power (for Single-Band only)
DSF = Smart Digital Filter - Without
08 800 MHz E With
09 900 MHz AIR =
Advanced Insulation (UMTS, LTE
only) - Without
18 1800 MHz G With (for 230 VAC only)
19 1900 MHz G = GFCI
- Without
21 2100 MHz A With (for 230 VAC only)
F = Frequency
26 2600 MHz AR =
Automatic Re-starter (With GFCI
only) - Without
BW = Bandwidth XX.X Bandwidth in MHz L With (for 230 VAC only)
230 230 VAC LP =
Lightning Protection (With GFCI
only) Without PS = Power
Supply 48 48 VDC ATEX With
M With ATEX = ATmosphere
EXplosive MTG = Monitoring
Module - Without
Solution for Cellular Phone coverage AIR Repeater™ RF/RF 2G/3G/4G
Distributore per l’Italia: PROTEL s.a.s. – www.protel.it – tel.: 02 48600265 - 285 – AIR Repeater™ RF/RF 2G-3G-4G – ed10 Quality Model FP1004D / ed 27 / 07 / 2011
Related Products
Cabin protection
ü Protection against Sunlight and Rain
ü Compatible with all SELECOM Repeaters
ü Easy installation
ü Support for laptop or measuring device
Electrical Case
ü Outdoor case
ü Cost effective solution
ü Isolation Transformer
ü GFCI
ü Re-starter
ü Service Outlet
ü CE compliant
ü Custom design on request
GPRS Modem
ü For the remote control via GPRS network
NMS (Network Management System)
ü NMS software manages a complete network of different
ü Screens with complete status and reports
ü Location on a map of each equipment
ü SMS, EMAIL alerts
ü Equipments control in case of needing
Solar panels
ü Free Energy
ü Battery for autonomy in case of lack of sunlight
ü Automatic relay to standard power supply
ü Ecological solution
Couplers
ü Balanced couplers (1 to 2, 1 to 3, 1 to 4)
ü Unbalanced couplers (1/3-2/3; 1/5-4/5; 1/10-9/10)
ü For all types of antenna combinations