SOLTEQ®Equipment for Engineering Education & Research

211103REV0.0

MODEL: BP 409

BATCH REACTOR

HE Batch Reactor (Model: BP 409) has been designed to introduce students of Chemical Engineering

on reactor and reaction behaviour. Students shall be able to run both the adiabatic and isothermal

batch reactions. The unit comes with all the ancillary equipment except analytical instrumentation for

the measurement of the composition of feed and product mixtures. The unit includes a reactor vesselof approximately 2 litres total capacity, and is equipped with a variable speed stirrer, inlet and outlet ports for the

feed, sampling and measurement of temperature and conductivity.

Two non-corroding feed storage vessels with

chemically resistant pumps and flow-meters are

supplied. A product/waste collection vessel is also

provided. The reactor incorporates a vacuum jacket

at the outside and a cooling coil at the inside so that

exothermic or endothermic reaction can therefore be

carried out at constant temperature (isothermal) or

adiabatic condition.

Optional electronic instrumentations with digital

indicators and data acquisition system in a PC can

be offered for continuous monitoring of temperature

and conductivity.

T

SOLTEQ

SOLTEQ®Equipment for Engineering Education & Research

211103REV0.0

EXPERIMENTAL CAPABILITIES

♦ Chemical kinetic studies for batch reaction.

♦ The effect of temperature on reaction rate.

♦ Determination of the activation energy, E.

♦ Plot of temperature vs. time at different initial reactant

concentration.

♦ Plot of conductivity vs. time.

♦ Computerised operation and data analysis

(optional).

SPECIFICATIONS

Bench-mounted apparatus designed to demonstrate

batch reactions under isothermal and diabatic

conditions.

Reactor

Reactor vessel : Borosilicate glass; top and bottom

plate made of non-corroding

material

Reactor volume : 2 L

Cooling system : Stainless steel cooling coil

Heating system : 0.5 kW; stainless steel immersion

heater; RTD sensor;

Temperature vontroller

Insulation : Vacuum jacket

Ports : Feed inlets, temperature,

conductivity, sampling/drainage

Stirrer System

Variable speed : 230 rpm with medium duty general

purpose motor

Impellers : 2" dia.

Electrical supply : 240VAC/1-phase/50-60Hz/50W

Feed Tanks

Capacity : 5 L

Material : Stainless steel

Waste Tank

Capacity : 12 L

Material : Stainless steel

Feed Pumps

Type : Centrifugal

Max. delivery rate : 3.785 LPM

Electrical supply : 240VAC/1-phase/50-60Hz

Control Panel

All necessary electrical components are housed in

the control panel. Instrumentations and digital displays

are panel mounted.

OPTIONAL ITEMS

- EI

DIGITAL INSTRUMENTATIONS

i) 2 units of electronic flowmeters

ii) 1 units of conductivity transmitter

- DAS

SOLDAS DATA ACQUISITION SYSTEM

i) A PC with latest Pentium Processor

ii) An electronic signal conditioning unit

iii) Stand alone data acquisition modules

iv) Windows based software

♦ Data Logging

♦ Signal Analysis

♦ Process Control

♦ Real-Time Display

♦ Tabulated Results

♦ Graph of Experimental Results

- CAL

SOLCAL COMPUTER AIDED LEARNING SOFTWARE

i) Interactive multimedia features

ii) Graphical simulation

iii) Experiment results samples

iv) Full experiment manuals

SOLTEQ

SOLTEQ®Equipment for Engineering Education & Research

211103REV0.0

UTILITY REQUIREMENTS

Electrical supply : 240VAC/1-phase/50-60Hz/6A

Water supply : Laboratory mains supply

Drainage point

OVERALL DIMENSIONS

Height : 1.52 m

Width : 1.22 m

Depth : 0.91 m

MANUAL

The unit is supplied with Operating and Experimental

Manuals in English giving full descriptions of the unit,

summary of theory, experimental procedures and

typical experimental results.

SOLTEQ®Equipment for Engineering Education & Research

SOFTWARE & E-LEARNING

Our range of teaching equipment can be complemented with our

SOLDAS and SOLCAL software.

SOLDAS®

- Supervisory Control & Data Acquisition

- Data Logging

- Signal Analysis

- Process Control

- Real-Time Display

- Tabulated Results

- Graph of Experiment Results

SOLCAL®

- Computer Aided Learning

- Multimedia Features

- Interactive

- Graphic Simulation

- Samples of Experiment Result

- Full Experiment Manuals

Contact us for a catalog CD

BUATAN MALAYSIA

SOLUTION ENGINEERING SDN. BHD. (Co. No. 174876-M)

A wholly-owned subsidiary of ACE Market listed, SOLUTION ENGINEERING HOLDINGS BERHAD

Sales Office :

No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,47100 Puchong, Selangor Darul Ehsan, Malaysia.Tel. No. : +(603) 8075 8000

Fax. No. : +(603) 8075 5784

Email : solution@solution.com.myWeb site : http//www.solution.com.my/

211103REV0.0