Soliris io - asset.somfy.com · 000 Creation 20/11/2019 S.NICOLAFRANCESCO. SUMMARY 1. PRODUCT...
Transcript of Soliris io - asset.somfy.com · 000 Creation 20/11/2019 S.NICOLAFRANCESCO. SUMMARY 1. PRODUCT...
1
Soliris io
DEFU Detailed Functionalities
DEFU_DOC158584_000 SOLIRIS io.ppt
Révision
Indice Description Date Modified by
000 Creation 20/11/2019 S.NICOLAFRANCESCO
SUMMARY
1. PRODUCT PRESENTATION
2. SYSTEM INTEGRATION
2.1 Mode 1
2.2 Mode 2
2.3 Mode 3
3. INSTALLATION
3.1 Installation situation
3.2 Wiring
3.3 Pairing 1W & 2W
4. BEHAVIOUR
4.1Wind & sun in mode 1
4.2 Rain in security and comfort mode
4.3 Wind, sun & rain combined
5. APPENDIX
3
PRODUCT PRESENTATION
1. PRODUCT PRESENTATION
4
SOLIRIS io
✓ Designed from 28 to 88km/h✓ Local setting in 1W mode✓ Compatible with rain sensor for security or
comfort benefits (wired Ondeis)✓ Always 230V Powered, no battery matter✓ Io protocol 1W &2W
Lpm 250ms compatibility postponed
Soliris io
Application perimeter
6
Awnings Pergola
EVBAwnings Pergola
Wind & Sun
Rain
Swinging shutter
Screen &
Zip screen
EVBScreen & Zip screen
Awnings Pergola EVBScreen &
Zip screen Roller
Shutters
Not compatible with Autonomous actuators
Not compatible in mode 2 for 2020
TaHoma will be implemented in 2020
Security & Comfort
Comfort
Roller Shutters (Sun only)
PRODUCT PRESENTATION
2. SYSTEM INTEGRATION
7
Soliris io
3 modes in io ecosystem depending of your installation and receivers paired
⚫ Mode 1:
▪ actuators are paired directely at the soliris io sensor
▪ Only 1W remote control is used & paired
▪ Wind and sun settings should be done localy
▪ Sensor behaviour is directed by SOMFY recommendations (see appendix)
⚫ Mode 2 (available in 2021):
▪ Intelligents motors are paired at the soliris io sensor (as pergola box unit)
▪ Only one way remote control is used & paired
▪ The intelligents motors used the raw datas from the sensor to react: the behaviour is directed by
intelligents motors
⚫ Mode 3 (available in 2021):
▪ 2 way remote control like TaHoma is used & paired
▪ Sensor behaviour, only sun and rain in comfort is directed by scenarios in TaHoma by end user
▪ Wind behaviour is directed by SOMFY directly to actuators paired.
8
Offer
Soliris io
Typical installation using sun, wind & rain in 1W
Wind 1W order=> go to secured
position
Soliris io
Rain sensor (opt)
Rain: 1W order:
Soliris set on Security => go to secured position.Soliris set on Comfort => go to down end limit (DEL)
230V
2.1 SYSTEM INTEGRATION mode 1
Sun: 1W order:
Sun Appearance: Goto DEL or mySun disappearance: GoTo UEL
EVBAwnings PergolaSwinging shutter
Screen &
Zip screen
Roller Shutters (Sun only)
Wind & SunRain
Security & Comfort
Offer
Soliris io
Typical installation using sun, wind & rain in 1W with intelligence in receiver
Wind 1W order=> Wind level
Soliris io
Rain sensor (opt)
Rain: 1W order:
Send rain or no rain
230V
2.2 SYSTEM INTEGRATION mode 2
Sun: 1W order:
Sun threshold in Lux
Pergola box for bioclimatic
Wind & Sun
Rain
Security & Comfort
Intelligent Actuators as
Offer
Soliris io
Typical installation using sun, wind & rain in 2W with TaHoma
Wind 1W order=> => go to secured
Position & possibility for the future to send
in 2W wind level
Soliris io
Rain sensor (opt)
Rain: 2W order:
Only in comfort mode: Send rain or no rain
230V
2.3 SYSTEM INTEGRATION mode 3
Sun: 2W order:
Sun value in Lux
Rain
Security & Comfort
EVBAwnings PergolaSwinging shutter
Screen &
Zip screen
Roller Shutters (Sun only)
2W => play SUN/No sun &Rain/no Rain scenarios
PRODUCT PRESENTATION
3. INSTALLATION
12
Soliris/Eolis io
3.1 Installation situations
Cover assembling
1 direction only (not possible to reverse the cover position on the sensor)
Soliris/Eolis io
14
3.2 Wiring (as Eolis io)
Plug for power supply(230V)
Plug for Ondeis sensor(dry contact)
C
S
Selector
to choose Security or
Comfort mode (rain Ondeis)
3 Positions:
C=comfort
S=secutity
Neutral=no rain sensorRainSensor
Soliris io
Soliris io Ondeis
3.3 pairing with 1W ecosytem
Usual « Prog prog » procedure
Soliris io and Ondeis paired to actuator
Soliris io
Soliris ioOndeis
Pair Soliris+Ondeis by Tahoma discovering process
• Soliris must be set on Comfort•1W pairing for rain (security) & Sun will be cancelled
1. Soliris wind io paired to actuator2. Soliris sun & Ondeis paired to Tahoma
Wind1W
3.3 pairing with 2W ecosytem
PRODUCT PRESENTATION
4. BEHAVIOUR
17
Not recommended
Roller Shutter External Screen AwningRoller Shutter with tilting slates
Ext Venitian Blind
Go to secured position (ex: pergola bio = Slates open)=>command ACTIVATE_FUNC_D80A
With Fast speed (if implemented by actuator)
+ blocking manual order 30s
+ blocking automatism order 11min 30s (after blocking manual order 30s)
No ActionNo
wind
Pergola bioPergola Swinging Shutter
4.1 Wind in mode 1
Roller Shutter External Screen AwningRoller Shutter with
tilting slates Internal Screen Ext Venitian Blind
Sun
Appearance
Sun
Desappearance
Mode 1The sensor will send 1 frame containing:
= EVB go to « MY » & RS go to « MY » & All go to « Down End Limit » (pergola = Slates Closed) & All with « Low speed » (for actuators who manage low speed)
= EVB go to « Flat slates » & All go to Up End Limit (pergola = Slates open) & All with « Low speed » (for actuators who manage low speed)
My
UP END LIMIT Flat Slates
My DOWN END LIMIT
Moves to the sun protection position after 5 min.
It is then possible to control the motorised product in manual mode.
Moves to the safety position automatically after a waiting time of 20 to 35 min* (except for a roller shutter at its lower end limit: it remains in this position).
It is then possible to control the motorised product in manual mode.
4.1 Sun in mode 1
4.2 Rain in security mode
Not recommended
Roller Shutter External Screen AwningRoller Shutter with tilting slates
Ext Venitian BlindPergola bioPergola Swinging Shutter Window Opener
Go to secured position (pergola bio = Slates open)
With Fast speed (if implemented by actuator) IVB = orientation
Moves to the safety position automatically and remains blocked as long as the
sensor detects rain.
No ActionNo
rain
Not recommended
Down End Limit (pergola bio = Slates closes)
With Fast speed (if implemented by actuator)
Moves to the lower end limit (or my) position automatically and remains blocked as long as the sensor detects rain.
If the sensor is paired with a Somfy io bi-directional control point (e.g. TaHoma ), the scenario programmed by the user is activated.
No ActionNo
rain
Roller Shutter External Screen AwningRoller Shutter with tilting slates
Ext Venitian BlindPergola bioPergola Swinging Shutter Window Opener
4.2 Rain in comfort mode
4.3 Wind / rain / sun behavior in mode 1
22
WINDRAIN
(Security)Sun ACTION
No No No GOTO 0% - Slat flat for EVB
No Yes No UEL (Fast) (secured position)
No Yes Yes UEL (Fast) (secured position)
No No Yes
DEL for other io profile compatible
My for RS, SW Shutter
My for EVB
Yes No No UEL (Fast) (secured position)
Yes Yes No UEL (Fast) (secured position)
Yes Yes Yes UEL (Fast) (secured position)
Yes No Yes UEL (Fast) (secured position)
WINDRAIN
(Comfort)Sun ACTION
No No No GOTO 0% - Slat flat for EVB
No Yes No DEL (FAST)
No Yes Yes DEL (FAST)
No No Yes
DEL for other io profile compatible
My for RS, SW Shutter
My for EVB
Yes No No UEL (Fast) (secured position)
Yes Yes No UEL (Fast) (secured position)
Yes Yes Yes UEL (Fast) (secured position)
Yes No Yes UEL (Fast) (secured position)
PRODUCT PRESENTATION
5. Appendix
23
Soliris io
24Threshold 1 = 28 km/h
Threshold 2 = 38 km/h
Threshold 3 = 49 km/h
Threshold 4 = 61 km/h
Threshold 5 = 74 km/h
Threshold 6 = 88 km/h
Wind function : Potentiometer
- Potentiometer will be deliver on position 1
- The change of threshold is made just upper the level of the mark. The value remains the same throughout the entire beach
- The Wind LED flashes number corresponds to the threshold setThe feedback corresponding to the set threshold appears after 2s.
- Wind LED off: Wind is lower than thresholdWind LED fixed on : wind is higher than threshold
Soliris io
25
5 Bft
6 Bft
7 Bft8 Bft
9 Bft
10 Bft
Wind function : Potentiometer
- Beaufort correspondence
Ne
w O
ffe
r
Soliris io
Check the wind function:Lower the actuator. Turn the wind potentiometer to the « Demo » position. (Threshold for demo mode = Threshold 1)➔ The motor makes a brief up and down movementTurn the anemometer manually to simulate the wind blowing.➔ The awning is raised automatically after 2 seconds.
Wind Function (demo mode)
Soliris io
27
◼ Soliris io – Sun threshold setting
Threshold 2 ~ 8,3 KLux
Threshold 3 ~ 16,7 KLux
Threshold 4 ~ 25 KLux Threshold 5 ~ 33,3 KLux
Threshold 6 ~ 41,7 KLux
Threshold 7 ~ 50 KLux
Threshold 1~ 1 Klux
Thanks