SolidWorks Session 5 Ferdowsi University of Mashhad Behnam Moetakef Imani.
-
date post
21-Dec-2015 -
Category
Documents
-
view
230 -
download
0
Transcript of SolidWorks Session 5 Ferdowsi University of Mashhad Behnam Moetakef Imani.
Draft
Draft tapers faces using a specified angle to selected faces in the model
You can specify the following types of draft:
Neutral plane
Parting line
Step draft
Draft : Neutral Plane
a. None : Drafts only the selected faces
b. Along Tangent : Extends the draft to all faces that are tangent to the selected face
Draft : Neutral Plane
c. All Faces. Drafts all faces extruded from the neutral plane
d. Inner Faces. Drafts all inner faces extruded from the neutral plane
Drafts : Parting Line
The parting line option lets you draft surfaces around a parting line
3D Parting line
• Allow Reduced Angle– only with Parting Line
– some portions of the drafted face may be smaller than the specified draft angle.
Draft : Parting Line with Step Draft
The step draft creates one face rotated about the plane used as the Direction of Pull
Draft Analysis
• You can check the draft angles on your model using the draft analysis tool. Draft analysis creates a color-coded rendition of the model faces based on the angle and the direction of pull criteria that you specify
• examine angle changes within a face