Solenoid valve - ITAHYDRAULIC · Solenoid valve SV10-25 valve, 2-way , normally open Descriptión...
Transcript of Solenoid valve - ITAHYDRAULIC · Solenoid valve SV10-25 valve, 2-way , normally open Descriptión...
Solenoid valveSV10-25 valve, 2-way , normally open
DescriptiónElectromagnetic drive, 2-way, normally open, direct-acting spool-type,screw-in hydraulic cartridge valve, used as a two-way valve.
Obras
Operation of Manual Override Option: When you want to override, pressthe button , rotate counterclockwise 180 ° release. The internal springwill push the button out . In this position, the valve may be only part ofthe movement. To really.Ensure full override shift, pull the button out to its fullest extension andhold it in this position.To return to normal valve function, press the button, in clockwise rotation180 ° release. Manual OverrideMembers will be locked in this position .
Feature
PropertyWorking pressure: 207 bar (3000 psi)
maximum 22.7
Internal Leakage: in 207 bar (3000 psi), the maximum of 82 ml / min(5 cubic inches / min)Temperature range: -40 to 120, the standard nitrile rubber seals
range.
state indicating: response time.
Media: viscosity between 7.4 ~ 420cSt (50 ~ 2000ssu) of mineral oil orsynthetic oil with lubricating
production, please.See section 3.400.1 coil nut information page.
Symbol
Flow (lpm/gpm)
SizeSV10-25
When installing coil, lettersmust face upwards
Manual OverrideOption
Manual Override optionsrelated information,See 1.001.1
The widthof the edge
Manual 5 ft-lbsof torque
maximum
InchMillimeter
Standard E -type line
Material Ordering
None ( blank)Manual OverrideManual OverrideManual Override
Galvanized surface . Nitrile rubber
(standard) .
reference.
3.200.1 .
standards,
the E-type coilUse, see 3.400.1 .
Usually only insert attachments
Sealing materialsNitrile rubber ( standard)
Viton
Standard coil terminal (VDC)
Standard coil terminal (VAC)
E -type coil terminal (VDC)
Wire with Weatherpak®
1/2 inch conduit
It provided with built-in coil diode.
Standard coil voltage
It provided with built-in coil diode.
The electromagnetic valveSV12-25 valve, 2-way , normally open
DescriptiónElectromagnetic drive, 2-way, normally open, direct-acting spool-type,screw-in hydraulic cartridge valve, used as a two-way valve.
Working Principle
spool shifts , thereby turning off the oil -way Flow.
Feature
PropertyWorking pressure : Max 240 bar (3500 psi)
inches
Temperature range: -40 to 120, nitrile rubber seals
Media: viscosity between 7.4 ~ 420cSt (50 ~ 2000ssu) of mineral oil orsynthetic oil with lubricating
Symbol
Flow (lpm/gpm)
Flow (lpm/gpm)
Scope of work
SizeSV12-25
InchMillimeter
The widthof the edge
The widthof the edge
10 ft-lbs of torque(13.5 Nm) maximum
55 ft-lbs of torque
Material Ordering
Steel, Face through hard placeManagement . Galvanized outer
TEF rubber O -rings and ring( standard Quasi- type).
see also 8.012.1 .
consult Factory.
3.400.1 .
Usually onlyinsert attachments
Sealing materialsNitrile rubber ( standard)
Viton
Voltage
Terminal (VDC)
Wireless ring
standard
Other coil voltage can be used for OEM
It provided with built-in coil diode .
Exercise facility .
Solenoid valveSV08-24 valve, 2-way , normally closed
DescriptiónElectromagnetic drive, 2-way, normally closed, direct-acting spool-type,
valve.
Works
Manual Override Function Operating method : To carry out anemergency operation, press the button , rotate counterclockwise180 ° release. The internal spring will push the button out . In thisposition, the valve may be only part of the movement. WishEnsure full override shift, pull the button out to its fullest extension andhold it in this position.To return to normal valve function, press the button, in clockwiserotation 180 ° release. Manual OverrideMembers will be locked in this position.
Feature
PropertyWorking pressure: 207 bar (3000 psi)Flow: Maximum 17 lpm (4.5 gpm)Internal Leakage: in 207 bar (3000 psi), the maximum of 82 ml / min( 5 cubic inches / min)Temperature range : -40 to 120, the standard nitrile rubber seals
range.
Media: viscosity between 7.4 ~ 420cSt (50 ~ 2000ssu) of mineral oil orsynthetic oil with lubricating
production, pleaseSee section 3.400.1 coil nut information page .
Symbol
Flow (lpm/gpm)
SizeSV08-24
When installing coil ,letters must face upwards
Manual OverrideOption
StandardE -type
line
View
5 ft-lbs of
maximum
The widthof the edge
20 ft-lbs of torque(27.1 Nm) maximum
InchMillimeter
Sealing materials
Standardcoil voltage
Standard coilterminal (VDC)
Nitrile rubber ( standard)Viton
Material Ordering
Quasi- type).
Rated pressure up to 240 bar (3500
size can be. Usually onlyinsert attachments
Option( blank)None
Manual OverrideFilter
wire ( 2 )wire , with Weatherpak®
1/2 inch conduit
It provided with built-in coil diode.
Solenoid valve
Symbol
SV12-24 spool valve , 2-way , normally closed
Flow
Flow
v
DescriptiónElectromagnetic drive, 2-way, normally closed, direct operatedsliding type, screw-in hydraulic cartridge valve, used as a two-way shut-off valve.
Feature
PropertyWorking pressure: Max 240 bar (3500 psi)
Leak: pressure of 240 bar (3500 psi) maximum of 410 ml / min( 25 in3 / min)Temperature range: NBR seals -40 ~ 120
2.8 Security
Media: viscosity between 7.4 ~ 420cSt (50 ~ 2000ssu) ofmineral oil or synthetic oil with lubricating
Work restrictionsSuction coil minimum voltage required to close
Size
InchMillimeter
the width
the width
Seals
Voltage
Terminal (VDC)
Wirelessring
Standard BunaFluorocarbons
Maximum
Maximum
Resist twisting
SV12-24
Material Ordering
Face of steel and hard- treated.
nitrile rubber OTFE -rings and rings.
can withstand240 bar (3500 psi) pressure, the SenateSee Section 8.012.1 page. Ball can also beused.Graphite cast iron and steel valve block , thesize of some.
Rugged metal housing , fully encapsulated ,in line with
See page 3.400.1 .
Usually onlyinsert attachments