SOLAR WATER PUMP KIT MODEL: SIG-CT5,5HP

Introduction:

SITECNO solar water pump system is complete solution for the supply of water with the power of solar energy. This system work in off grid mode and also hybrid with grid or diesel generator for water pumping in night or unstable weather conditions. Solar PV panels generate DC power when exposed in sun light, this DC power is supplied to MPPT inverter drive which convert this DC power in to regulated AC power and feed to the water pump motor. As a result water pump start pumping water according to its specification. SITECNO has special software to synchronise the PV power, inverter drive and water pump parameters for the smooth working of solar water pump system during the day time in the presence of sunlight. Solar water pump PV Inverter drive has addi-tional advantage of soft starter.

5.5 HP Pump capacity 5.5 kW PV panels total power 4 inches Pump outer diameter Water head range 6-26 meter 19.8-85.8 feet Quantity of water range 20.000-78.000 liter / hour 88-343 gallon / minute Quantity Description 22 250 Wp Solar photovoltaic Si-polycrystalline panels 1 5,5 kW Water pump inverter 380-400V, 50Hz, Three Phase 1 unit Digital display screen for inverter (included) 1 unit DC connector for connection of PV Input (included) 1 5,5 kW Water pump motor submersible type 380-400V, 50Hz, Single Phase 1 5,5 HP Water pump submersible type (included) 22 unit Aluminum support structure for solar panels 74 meter DC cables 6mm R1000 PV panel to inverter 26 meter AC cable waterproof 2 core inverter to submersible pump motor 1 unit AC cable waterproof jointing kit 4 pair Solar connector MC4 50 meter Stainless steel wire for submersible water pump 2 unit Stainless steel wire joints 1 set SITECNO synchronization software for PV panels, inverters and pump motor 1 set Support structure installation tools 1 set Instructions manual for installation 1 set Electrical design layout

SYSTEM WARRANTY:Solar modules production: 25 yearsAluminium support structure: 10 yearsInverters: 2 years Pump: 2 years

Quality of Components: Manufactured in EU All components in the kit are high quality with CE standard

SOLAR WATER PUMP

These systems are modular and flexible and can be installed as per your space and requirement. You can ask for additional services as state-of-the-art designing, drawings, engineering and installation of your projects. The solar water pump kits are designed by experts of SITECNO Group to meet the need of all kinds of water pumping.

Application areas

Designed for continuous as well as intermittent operation, the SITECNO solar system is especially suitable for water supply in remote locations such as:

• Villages, schools, hospitals, single-family houses, etc.

Farms and ranches• Watering of livestock• Irrigation of crops and green houses

Game parks and game farms• Watering applications

Conservation areas• Surface water pumping

Ponds and lakes• Floating pump installations

Sizing and selection made simple and easy:

All you need to determine is the following three parameters:· Geographical location· Required maximum head· Required water quantity per day

2

You get it all

• FREE reliable water supply

• COST FREE-efficient pumping

• Complete plug-and-play water pump system

• Wide voltage range

• AC and DC voltage handling easy installation

• Virtually no maintenance

• Numerous expansion possibilities

• Changover to grid or diesel generator

Solar panels

Inverter Water delivery pipe

Single line installation diagram

Water pump

3

DG Set

Grid

POLYCRYSTALLINE SOLAR PV MODULE

SITECNO Solar Photovoltaic Panels stand for quality, durability and most importantly, high performance. Our experience, capacity of research, continuing development and improve-ment have turned us into a company recognized in the sector by the high value offered to our clients.

Due to their engineered hollow section frame and its 4mm special textured glass with AR coating, SITECNO modules meet the maximum demands with regard to stability and corro-sion resistance.

Thanks to their high performance SITECNO modules are prepared for changes in legislation. These panels will produce 5% more than any other of the same features.

The performance warranty is for 25 years, after 12 years, modules still produce a minimum 90% of their nominal performance. After 25 years module still produce a minimum 80% of their nominal performance.

Electrical Characteristics:

MODEL SI-60P 250Nominal Power (Pmax) 250WOpen Circuit Voltage (Voc) 37,5VShort Circuit Current (Isc) 8,76AVoltage at Nominal Power (Vmp) 30,3VCurrent at Nominal Power (Imp) 8,24AModule Efficiency (%) 15,20

Mechanical Characteristics:

Cell type Polycrystalline156x156mmNumber of cells 60 (6x10)Module dimension 1660 x 990 x 50/40mmWeight 20kgFront cover TSG low-iron tempered glassFrame Aluminium alloyJunction box IP65, 3diodesCable length 1200mm (+) , 800mm(-)Connector PV-JM601

Temperature Coefficients:

Nominal Operating Cell Temperature (NOCT) 25°C ±2°CTemperature Coefficients of Pmax -0.43% / °KTemperature Coefficients of Voc -0.31% / °KTemperature Coefficients of Isc 0.04% / °KOperating Temperature -40 °C to +85 °CMaximum System Voltage 1000V DCReverse current load 15A

4

430

430

800

800 (-)

1200 (+)

100

100

1460

950

990

1660

Due to the unique combination of components, the high-efficiency modules from SITECNO are particularly powerful. With the high efficiency, the SITECNO offers maximum performance compared to the small overall area required. This also means: less effort and less material for installation. This increase in efficiency and the long-term high energy yields of SITECNO ensure efficient operation of your photovoltaic system. The quality of SITECNO module is continuously tested and confirmed by independent institutes. SITECNO modules are stored with a positive power classification. The performance is guaranteed by SITECNO for 25 years, the product guarantee is 10 years.

SITECNO MODULE MonocrystallineSITECNO MODULE Polycrystalline

CERTIFIED SAFETYFOR PRODUCTIVE DECADE

Damp-Heat Test IEC 61215Result: The modules exceed the requirements by the

factor of three in regard to environments with intense damp/heat.

Thermal Cycling Test IEC 61215Result: The modules exceed the requirements in regard to

temperature fluctuation and three timesextended performance time.

Mechanical Load Test IEC 61215Result: SITECNO PV-modules’ structuralengineering sustains above-average loads.

Extensive quality management through pro-duction according to international quality and environmental standards as well as strict internal examinations.

Consistently high cell quality through strict quality examinations by high-resolution electro-luminescence and infrared measure-ments.

Strict quality examinations of the supplied components and each manufacturing step through optical and electronic test stations along the whole manufacturing line.

10 years product and 25 years performance guarantee

Proper recycling and all sold modules through full membership in the PV Cycle association

Intelligent and perfectly matched systems and services from the technical and econom-ical plant layout up to the factory service

Worldwide known and certified through VDE (IEC 61215 Ed.2, IEC 61730-1 Ed.1 and IEC 61730-2 Ed.1)

25

SITECNO MODULE BIPV

5

SOLAR WATER PUMP INVERTER

Danfoss Solar Pump Inverter:•TheIP66solutionisinnovativefromboththehardwareandthesoftwarecontrolstrategypointofview.•Asmallenclosurewheretoplacethemainsswitchandthesurgeprotectiondevicereplacestheusualbigcabinet,asthe inverter is placed outside.•TheIP66invertercanbeinstalledoutdoorswithoutanyreliabilityrisk.Itdoesn’trequiremaintenance, as there are no filters to clean/replace.•Correctoperationofthedriveisvisiblefromoutsidethanksto4LEDsshowingtheoperatingconditions: Power-ON, Run, Ready, Fault. An IP66 display panel can also be connected to get detailed information when needed, or kept permanently installed on the drive to show several variables (running speed, MWh counter, etc.)Complementary products Solar panel connection mode:•Stand-alonesolution:invertersuppliedbysolarpanelsDCvoltage.•Completelyindependentfromthemainssupplyandselfsufficientinstallation.

Solar panel or grid connection mode:•Withanexternalchangeoverswitch,invertercanbesuppliedeitherbymainsorsolarpanels.•Usefulduringnightorpanelmaintenanceoperations.•Theinvertercanhavea“hotcommutation”fromgridtoPVandvice-versa,astheyrecognizethesupplysource(solarpanels or grid) by a digital input, selecting the appropriate control software.

PC software :Softwareapplicationfeatures:•PIDcontrollerwithautomaticsleepandwake-upfunctions •Supervisionsandactualvaluemeasurement •Multiplestartmode •Automaticandrepeatedstartingattemptatsunrise •Dry-runprotection

A dedicated application was developed to drive a solar pump with an optimized multiple algorithm MPPT (Maximum Power Point Tracking) supplied by solar panels.The unique controller MPPT4 controller implements 4 concurrent algorithms:• Feed-Forward controller (to follow the radiation variations)• Correction controller (to compensate the temperature variations)• OscillationDampingregulator(tocatch-backthepanelsenteringinthe“currentsourcemode”)• LocalMaximaBypasslogic(toskipthe“false”maximumpointincaseofpartialirradiation)

Technical overview:Dualmodesupplyconnection: •ACMains:380-480V(+/-10%),47…66Hz •Solarsupply:upto800VDC •ACMains:208-240V(+/-10%),47…66Hz •Solarsupply:upto400VDCEnclosurerating: •IP66/Type4Xenclosure:maintenancefree •Largecapacitorsbankforitscategory,sothatsuddenchangesinsolarpower availability during operation are smoothed, avoiding annoying trips.Built-inMPPT4: •MPPT(Maximumpowerpointtracker):areal4-algorithmscontrolschemetoobtain maximum power for any given environmental conditionsEMC: •Built-inEMCfilteraccordingtoEN61800-3CategoryC2(forMainssupply)Communication: •RS485Mod-busRTUconnectionandEthernetMod-busTCPintegratedasstandard.

6

SOLAR WATER PUMP

Applications For water supply, irrigation, civil, industrial and fire fighting applications.

Features• All pumps feature complete fabricated stainless steel AISI 304 construction.• All pumps are equipped with water lubricated rubber wear rings and bush bearings to work

well with sand, found in well water.• These pumps offers higher pumping efficiency due to state-of-the-art computerized hy-

draulic design and usage of stainless steel sheet metal which offers a very low co-efficient of friction. This significantly reduces energy consumption.

• These pump can withstand harsh, abrasive and corrosive environment due to their construc-tion in high grade AISI 304 stainless steel.

• All pumps are equipped with reliable non-return valve to prevent back flow and reduces water hammer when the pump is stopped.

Material:• Borewellpumpsfor4”wells(DN100mm),6”(DN150mm),8”(DN200mm)and10”

(DN 250 mm) are constructed completely out of stainless steel AISI 304.• SizedforconnectiontothemotoraccordingtoNEMAstandardsupto8”motorjoining.• Delivery casing with built-in non-return valve. (AISI 316 material available on request).

Impellers:

Radialflowimpellers: 4”&6” Mixedflowimpellers: 4”,6”,8”&10”

Connection: Screwed pipe connection with BSP thread as standard. (NPT thread pipe connection are available on request.)

Operating conditions Liquid temperature 45 °C Maximum sand content 50 g/m³ Water pH 6,5 - 8 Rated speed [rpm] 2900 Max. submerged depth 350 metres Motor Voltage 380 / 400 / 415 V, 3 Phase Enclosure class IP 68 Motor type Water filled submersible motor

The conditions below apply to the curves:Tolerances in accordance with ISO 9906, Annex A.• The motors used for the measurement are standard motors.• Test results with clean cold water, without gas content. Measurements have been made with

airless water at a temperature of 20°C.• Head and power values valid for liquids with density ρ = 1,0 kg/dm³ and kinematic viscosity

= max 1 m²/s (1 cSt).• The QH curves apply to a rated motor speed of 2900 min-1.• The performance curves are inclusive of possible losses such as non-return valve losses.• A safety margin of + 0,5 m is recommended for the NPSH value.• Pst = Power with reference to one stage.

7

WATER PUMP MOTOR DATA

ConstructionThe water pumps submersible motors are designed using state-of-the-art computerized design techniques. All com-ponents are manufactured with superior quality material and are machined using precision CNC machine tools to ensure that motors are produced of excellent quality and reliability. They are built to provide maintenance-free, long life submersible pump operation.

These are 2-pole induction motors, 50 Hz at Rated speed 2900 rpm and 60 Hz at Rated speed 3450 rpm. We offers a wide variety of submersible motors as per details below.

Water filled stainless steel motor features:•Easilyrewindable(wetwound)inductionmotorwithPEinsulatedwindings.•CompletelystainlesssteelAISI304construction.•Designedandsizedforinstallationin3”,4”,6”,8”&10”diameter.•Waterlubricatedradialandaxialthrustbearings.•Counterthrustbearing.•Motorsarepre-filledwithcleanwater+Glycolmixture.•ShaftextensionmadeofstainlesssteelAISI316.•Highefficiencyelectricaldesign(loweroperatingcost).•Tropicalizeddesign(lowerwindingtemperature).•Singlephasemotorsarecapacitorstartandrundesign.Allsinglephasemotorswillrequirecontrolbox.•Pressurecompensationdiaphragm.

Specification:Ratings: Single phase - 0,37 to 4 kW Three phase - 0,37 to 200 kWSupply voltages (Tolerance +6% / -10%): 50 Hz, 1 phase, 220 V, 230 V 50 Hz, 3 phase, 380 V, 400 V, 415 V 60 Hz, 1 phase, 115 V, 230 V 60 Hz, 3 phase, 230 V, 380 V, 460 VDegree of protection: IP 68Continuous dutyAmbient temperature: 45°CRotation: Single phase - CCW Three phase - CCW and CWMaximum nos. of starts/hour: 0,37 to 2,2 kW - 20 3 to 5,5 kW - 10Water pH: 6,5 - 8Minimum cooling flow along the motor: 8 cm/secMotor protection: Select thermal overload protection with trip time < 10 sec. at 5 x InMaximum submerged depth: 350 metres.

Models•4”Waterfilledmotor,•4”Waterfilledstainlesssteelmotor,•4”Encapsulatedmotor,•6”Waterfilledmotor•6”Waterfilledstainlesssteelmotor, •6”Waterfilledheavydutymotor•6”Waterfilledheavydutystainlesssteelmotor,•8”Waterfilledheavydutymotor•10”Waterfilledheavydutymotor

8

9

Pump Performance DatasheetCustomer :Customer reference :Item number : DefaultService :Quantity : 1

Quote number : SizeStages : 2Based on curve number : W60-02-2-50Date last saved

Operating ConditionsFlow, rated : 57.29 m3/hDifferential head / pressure, rated (requested) : 14.52 mDifferential head / pressure, rated (actual) : 14.52 mSuction pressure, rated / max : 0.00 / 0.00 bar.gNPSH available, rated : AmpleFrequency : 50 Hz

PerformanceSpeed, rated : 2900 rpmImpeller diameter, rated : 105 mmImpeller diameter, maximum : 105 mmImpeller diameter, minimum : 105 mmEfficiency : 79.32 %NPSH required / margin required : 4.84 / 0.00 mnq (imp. eye flow) / S (imp. eye flow) : 83 / 112 Metric unitsMCSF : -Head, maximum, rated diameter : 27.68 mHead rise to shutoff : 88.69 %Flow, best eff. point : 57.29 m3/hFlow ratio, rated / BEP : 100.00 %Diameter ratio (rated / max) : 100.00 %Head ratio (rated dia / max dia) : 100.00 %Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1.00 / 1.00 / 1.00 / 1.00Selection status : Acceptable

LiquidLiquid type : WaterAdditional liquid description :Solids diameter, max : 0.00 mmSolids concentration, by volume : 0.00 %Temperature, max : 20.00 deg CFluid density, rated / max : 0.999 / 0.999 kg/dm3Viscosity, rated : 1.00 cStVapor pressure, rated : 0.00 bar.a

MaterialMaterial selected : Standard

Pressure DataMaximum working pressure : 2.71 bar.gMaximum allowable working pressure : N/AMaximum allowable suction pressure : N/AHydrostatic test pressure : N/A

Driver & Power DataDriver sizing specification : Maximum powerMargin over specification : 0.00 %Service factor : 1.00Power, hydraulic : 2.26 kWPower, rated : 2.85 kWPower, maximum, rated diameter : 3.10 kWMinimum recommended motor rating : 3.73 kW / 5.00 hp

0

3

6

9

12

15

18

21

24

27

30

Hea

d - m

105 mm

5159

67

67

73

73

77

77

79

79

0.0

0.9

1.8

2.7

3.6

Pow

er -

kW

105 mm

0

5

10

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90

NPS

Hr -

m

Flow - m3/h

ACCESSORIES

Design and manufacture SITECNO SpainType Modular typeTechnical feature Aluminium 25 years warranty Tamper proof nut bolt 100% recyclable material A2 Stainless steel boltsWeight 2,49kg/mLoads wind, snowTest certificate CE Certifies

Cable:Manufacture Top Cable Spain· Model: SI-MC4-F· Rated Voltage: TUV 1500V DC / UL 600V DC· Rating Current: 20-30A· Cable Size: 2.5-4.0-6.0, 10-12-14AWG· Proof Voltage: TUV 1500V AC, 1 min· Protection Class: Class II·· Temperature Range: -40 to 85ºc· Flame class: UL94-V0

Connector:Flexible conductor, class 5Maximum service temperature: 120ºCEstimated lifetime 30 years. Resistant UV ResistantGrease&mineraloilsresistance: excellentGrease&mineraloilsresistance: excellent

Wire rope:

Material: Stainless steel

Support structure

Cable

Cable connector MC4

10

Wire rope

5.5 HP SOLAR ENERGY WATER PUMP KITS

Complete systems including all accessories with following options

REF# MODEL# Option details:24102 SIG-ET5.5HP -with General water pump and without aluminium support structure24302 SIG-CT5.5HP -with Spanish water pump25102 SIS-ET5.5HP -with Grundfos water pump and without aluminium support structure25302 SIS-CT5.5HP -with Grundfos water pump

11

Solar Energy Water Pump Kit Order Code Configuration: SI G - E S 5 HP - A

Model:

SI SITECNO

Panels Aluminium support structure:

C kit with aluminium support structure

E kit without aluminium support structure

Pump power (HP/KW):

0,25to50

AC output phase:

D DC

S single phase 220V

T three phase 400V

Pumptype:

standard

A advance more water

For DC pump 0,6 to 2,5 and 3A to 11A

Pump brand:

G General S Grundfoss

PVP9.678,99 €12.907,24 €12.051,19 €15.279,44 €

NON STOP FREE WATER WITH SOLAR ENERGY

SITECNO S.A.C/ Can balmes 1, Zona industrial,Santa. Mª. de Palautordera, 08460 Barcelona, Spain.Tel: +34 938482544Fax: +34 938480439info@sitecnosolar.comwww.sitecnosolar.com

Authorised distributor: