SOLAR-MMS - '+domain name+' 2M _ MODULE MOUNTING STRUCTURE 1M _ MODULE MOUNTING STRUCTURE RPK GREEN...
10
SOLAR-MMS 2M _ MODULE MOUNTING STRUCTURE 1M _ MODULE MOUNTING STRUCTURE RPK GREEN TRADING No.222, 9th Street (North), SIDCO Industrial Estate, Ambattur, Chennai - 600 098. M: +919841725555 T: +914443189966 Email: [email protected] / [email protected]
Transcript of SOLAR-MMS - '+domain name+' 2M _ MODULE MOUNTING STRUCTURE 1M _ MODULE MOUNTING STRUCTURE RPK GREEN...
SOLAR-MMS
2M _ MODULE MOUNTING STRUCTURE 1M _ MODULE MOUNTING STRUCTURE
RPK GREEN TRADINGNo.222, 9th Street (North), SIDCO Industrial Estate,Ambattur, Chennai - 600 098.M: +919841725555T: +914443189966Email: [email protected] / [email protected]
SOLAR - MODULE MOUNTING STRUCTURE (MMS)
GENERAL 1
TECHNICAL DATA SHEET 2
2M – MODULE MOUNTING STRUCTURE 2
1M – MODULE MOUNTING STRUCTURE 3
OVERVIEW OF SYSTEM COMPONENTS 4
MMS ASSEMBLY DRAWING 5
MMS STEP BY STEP INSTALLATION 6
MODULE MOUNTING STRUCTURE (MMS)
Few of our esteemed clients
MODULE MOUNTING STRUCTURE
RPK provides PV mounting solutions by MMS, a leader in
the PV mounting industry for quality designs, durability and a variety of designs for ground, rooftop, and structure
mounting systems to accommodate the needs of any type
of solar array installation. Flat Roof Mount Save time and money with the most revolutionary flat
roof mounting solution in the world! Engineered for flat roof mounting applications, RPK Roof
Mount is a non-penetrating solution that can be installed at
a rate of 2-3kW per man hour, making it one of the fastest,
easiest and most cost-effective solutions on the market today. The configurable design accommodates 0-29 degree module tilt and best of all, requires no ballast blocks or concrete in 90-120 mph basic wind zones. The patented RPK, MMS Structures are designed to work with a variety of standoffs and flashings when attachments are
necessary for seismic and high wind zones requirements. Maximum flexibility
Flush, high-profile or low-profile configurations Roof or ground mount
Pitched or flat roof Ease of installation
Installer-friendly components
Minimized penetration with longer attachment spans than competitive products
Designed with customer input
Impressively Innovative - Value and Quality
Self ballasting system in 90-120 mph wind zones Freedom and flexibility accommodates majority of PV modules
Maintains roofing system warranty Engineered Smart - Assemble, Don’t Build
No field fabrication required Installs at 2-3 kW per man hour
Strength – Bigger, Fewer, Better
Install with 1socket wrench
Economical aluminium components and stainless
steel fasteners. Faster, Flexible Components
Configurable tilt angles, support 0-29
degrees Configurable roof touch points Compatible with off-the-shelf wire management
RPK_SE_MMS_REV 00 Page 1
2M – SOLAR MODULE MOUNTING STRUCTURE
TECHNICAL DATA
DESCRIPTION MMS_2M
CONFIGURATION AERODYNAMIC DESIGN, TWO MODULE STRUCTURE
INSTALLATION TYPE FLAT ROOF / PITCHED ROOF
DESIGN LIFETIME 20 YEARS
SIZE 2000 x 1800 MM
MATERIAL ALUMINIUM ALLOY - 6063 T6
TILT ANGLE 0º - 29º (FLAT ROOF)
TRACKER TYPE FIXED
DESIGN WIND LOAD 150 KM/HR
PANEL TYPE ANY TYPE OF PV CRYSTALLINE MODULES
MODULE ORIENTATION LANDSCAPE OR PORTRAIT
STRUCTURE ANODIZED ALUMINIUM
DISTANCE FROM GROUND TO PANEL 100 MM
DISTANCE BETWEEN PANEL AIRGAP 25 MM
TOTAL WEIGHT FOR 1KW 10 - 12 KGS
MAINTENANCE FREE, PANEL CLEANING AS REQUIRED
RPK_SE_MMS_REV 00 Page 2
1M – SOLAR MODULE MOUNTING STRUCTURE
TECHNICAL DATA
DESCRIPTION MMS_1M
CONFIGURATION AERODYNAMIC DESIGN, TWO MODULE STRUCTURE
INSTALLATION TYPE FLAT ROOF / PITCHED ROOF
DESIGN LIFETIME 20 YEARS
SIZE 1000 x 900 MM
MATERIAL ALUMINIUM ALLOY - 6063 T6
TILT ANGLE 0º - 29º (FLAT ROOF)
TRACKER TYPE FIXED
DESIGN WIND LOAD 150 KM/HR
PANEL TYPE ANY TYPE OF PV CRYSTALLINE MODULES
MODULE ORIENTATION LANDSCAPE OR PORTRAIT
STRUCTURE ANODIZED ALUMINIUM
DISTANCE FROM GROUND TO PANEL 100 MM
DISTANCE BETWEEN PANEL AIRGAP 25 MM
TOTAL WEIGHT FOR 1KW 10-12 KGS
MAINTENANCE FREE, PANEL CLEANING AS REQUIRED
RPK_SE_MMS_REV 00 Page 3
Overview of System Components RPK_SE_MMS_REV 00 Page 4
MMS Assembly
TOP SECTION MID SECTION
A1
MID SECTION
A2
BOTTOM SECTION
RPK_SE_MMS_REV 00 Page 5
MMS Step by Step Installation
Step 1 : Place the MMS Bottom section on the flat roof floor level
Step 2 : Connect the Top section with bottom section by using M6 x 75 mm Hexagonal bolt & nut
Step 3 : Connect Mid section A2 with Bottom section by M6 x 75 mm Hexagonal bolts & Nuts, and then fix A2 section with Top section by M6 x 75 mm Hexagonal bolts & Nuts.
Step 4 : Connect Mid section A1 with Bottom section by M6 x 75 mm Hexagonal bolts & Nuts, and then fix A1 section with Top section by M6 x 75 mm Hexagonal bolts & Nuts.
Step 7 : Fix the Hex Head Bush Nut on the top section and
tightened with sqaure nut, then fix 1st Stopper ‘L’ Bracket on the front side of the MMS top section by using M6 x 16 mm Hexagonal Bolts & Nuts with washer
Step 8 : Place the MMS one by one with columnwise and rowwise as per your requirement, and connect the MMS on the floor by using M10 x 100 mm Foundation Anchor bolts.
RPK_SE_MMS_REV 00 Page 6
Step 9 : Place first row PV on the MMS, next to first Stopper Step 10 : After placing the PV module on the MMS, then fix
‘L’ Bracket. Place and fix the 2nd Stopper “L’ Bracket next to
the End clamp and Mid clamp on the top side of the PV
1st PV on the MMS top section by using M6x16 mm
frame and tightened on the MMS by using M6 x 60 mm
Hexagonal Bolts & Nuts with washer. Airgap between two PV
hexagonal bolts and nuts with washer.
panels are 25 mm ,after fixing the 2nd Stopper ‘L’ Bracket.
Overall MMS with PV Module Installation completed
RPK_SE_MMS_REV 00 Page 7
SOLAR-MMS
2M _ MODULE MOUNTING STRUCTURE
1M _ MODULE MOUNTING STRUCTURE
No.36, Wallajah Road,
Chennai – 600 002, INDIA
www.nepcindia.com
ADMINISTRATIVE HEAD OFFICE :
RPK GREEN TRADINGNo.222, 9th Street (North), SIDCO Industrial Estate,Ambattur, Chennai - 600098.M: +919841725555T: +914443189966Email: [email protected] / [email protected]
Few of our Installed Projects
