Snowden-Pencer plastic and specialty instruments - … · Snowden-Pencer ® plastic and specialty...

Snowden-Pencer® plastic and specialty instruments

Table of contents

Scissors ..............................................................................1

Needle holders ...............................................................22

Thumb forceps ...............................................................38

Forceps ............................................................................47

Hemostats .......................................................................50

Retractors .......................................................................56

Dissectors ........................................................................64

Rasps ...............................................................................67

Bone crushers .................................................................69

Wire cutters ....................................................................70

Pliers ................................................................................71

Curettes ..........................................................................71

Osteotomes ....................................................................71

Elevators .........................................................................74

Spatulas ..........................................................................76

Specula ............................................................................77

Hooks ..............................................................................78

Cannulas .........................................................................80

Suction tubes ..................................................................80

Calipers ...........................................................................80

Markers ...........................................................................81

Mallets ............................................................................82

Knives ..............................................................................83

Staplers .......................................................................... 84

Headlights/Light source/Accessories .............................85

http://www.micrins.com/pdf/SnowdenPencerMicrinsCatalog#page=4







10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 1

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Edges Operating ScissorsGeneral utility scissors.

32-0600

Sharp/Blunt. Straight. Tungsten Carbide. Overall length 5-1/2in (14cm).

32-0610

Sharp/Blunt. Curved. Tungsten Carbide. Overall length 5-1/2in (14cm).

32-0620

Sharp/Sharp. Straight. Tungsten Carbide. Overall length 5-1/2in (14cm).

SNOWDEN-PENCER® Diamond-Edges MAYO Scissors

32-0800

Curved. Tungsten Carbide. Overall length 5-1/2in (14cm).

32-0810

Straight. Tungsten Carbide. Overall length 5-1/2in (14cm).

32-0820


32-0830


SNOWDEN-PENCER® Diamond-Edges MAYO ScissorsLower blade serrated.

32-5820


32-5830


SNOWDEN-PENCER® Diamond-Edges Supercut MAYO ScissorsExtremely sharp blades.

32-4820

Curved. Overall length6-3/4in (17cm).

32-4830

Straight. Overall length6-3/4in (17cm).

32-0630

Sharp/Sharp. Curved. Tungsten Carbide. Overall length 5-1/2in (14cm).

32-0640

Blunt/Blunt. Straight. Tungsten Carbide. Overall length 5-1/2in (14cm).

32-0650

Blunt/Blunt. Curved. Tungsten Carbide. Overall length 5-1/2in (14cm).

Scissors

CiseauxScherenForbiciTijerasTesoura

Instrument pictured Most widely used patterns 2

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Edges MAYO-CARROLL ScissorsHeavy-duty, general-purpose scissors.

32-0860

Curved. Tungsten Carbide. Overall length9in (23cm).

SNOWDEN-PENCER® Diamond-SerEdge BOSTWICK-MAYO Serrated ScissorsLower blade is serrated.

32-5860


32-5870

Straight. Tungsten Carbide. Overall length9in (23cm).

SNOWDEN-PENCER® Diamond-Edges METZENBAUM ScissorsSmooth and rounded tips.

32-0710

Curved. Tungsten Carbide. Overall length5-3/4in (14.5cm).

32-0720

Straight. Tungsten Carbide. Overall length5-3/4in (14.5cm).

32-0750


32-0760


SNOWDEN-PENCER® Diamond-SerEdge Delicate METZENBAUM ScissorsLower blade serrated.

32-5711


32-5751


32-5781

Curved. Tungsten Carbide. Overall length8in (20.5cm).

32-5791


32-0780


32-0785

Straight. Tungsten Carbide. Overall length8in (20.5cm).

32-0790


32-0880


Scissors

CiseauxScherenForbiciTijeras

Tesoura

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 3

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Edges METZENBAUM ScissorsSharp/sharp tipped delicate scissors.

32-0712


32-0722


32-0752


SNOWDEN-PENCER® Diamond-Edges Delicate METZENBAUM ScissorsRounded tips.

32-0711


32-0721


32-0751


32-0761


SNOWDEN-PENCER® Diamond-Edges METZENBAUM Serrated ScissorsLower blade serrated.

32-5710


32-5750


32-5780


32-5790


SNOWDEN-PENCER® Diamond-Edges McCOLLOUGH METZENBAUM ScissorsHeavy-pattern METZENBAUM.

32-0714

Curved. Overall length5-3/4in (14.5cm).

32-0762


32-0792


32-0781


32-0791


32-0796


32-0881


Scissors



Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Edges Supercut METZENBAUM ScissorsExtremely sharp blades.

32-4710


32-4720


32-4750


SNOWDEN-PENCER® Diamond-SerEdge ScissorsSerrated. Overall length 9in (23cm).

32-5660

Slight curve.

32-5661

Medium curve.

32-5662

Full curve.

SNOWDEN-PENCER® KAYE ScissorsRibbon type, with serrated stainless steel blades and semi-sharp outer edges. Scissors feature large finger rings.

88-6196


SNOWDEN-PENCER® Diamond-Edges KAYE ScissorsDelicate, serrated, with double-beveled blades and semi-sharp outer edges.

32-5906


32-4760


32-4790


Scissors


Tesoura

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 5

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-SerEdge KAYE ScissorsSerrated scissors.

32-5974


32-5976


32-5979


SNOWDEN-PENCER® Diamond-SerEdge KAYE ScissorsHeavy blades and shanks.

32-5986

Curved. Tungsten Carbide. Overall length5-1/2in (14cm).

SNOWDEN-PENCER® Diamond-SerEdge KAYE-FREEMAN ScissorsSpread (open) shanks conform to the normal resting position.

32-5978


SNOWDEN-PENCER® GORNEY ScissorsOriginal design with serrated stainless steel blades.

88-6139


88-6140


Scissors



Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-SerEdge GORNEY Scissors

32-5991

Straight. Tungsten Carbide. Overall length7-1/2in (19cm).

32-5992


SNOWDEN-PENCER® Diamond-SerEdge GORNEY Delicate ScissorsThe blades feature serrated, Tungsten Carbide inserts.

32-5916


SNOWDEN-PENCER® Diamond-SerEdge GORNEY-FREEMAN ScissorsSpread (open) shanks conform to the normal resting position of the hand.

32-5993


32-5994


32-5995

Straight. Overall length9in (23cm).

32-5996

Curved. Overall length9in (23cm).

SNOWDEN-PENCER® Diamond-SerEdge ASTON ScissorsSerrated. Double-edged blades.

32-5980


32-5981


Scissors


Tesoura

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 7

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-SerEdge ASTON Supercut ScissorsSpecially designed with one Supercut blade.

32-5729

Angled. Tungsten Carbide. Overall length5-1/2in (14cm).

SNOWDEN-PENCER® Diamond-SerEdge REES ScissorsSerrated. Theses scissors feature tapered, flattened tips and double-edged blades.

32-5822


32-5831


SNOWDEN-PENCER® Diamond-SerEdge DAVIS ScissorsSerrated with sharp, tapered tips.

32-5946


SNOWDEN-PENCER® Diamond-SerEdge CASTANARES ScissorsSerrated with short, sturdy blades with rounded tips.

32-5833


Scissors



Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-SerEdge WILKINSON ScissorsThese feature angled shanks, double-beveled blades and “Duckbill” tip.

32-5983


SNOWDEN-PENCER® Diamond-SerEdge FREEMAN ScissorsCurved, blunt with flattened tips.

32-0989


SNOWDEN-PENCER® Diamond-SerEdge GOLDMAN FOX ScissorsSerrated with tapered blades leading to fine tips.

32-5940


SNOWDEN-PENCER® Diamond-SerEdge GREENBERG PAR ScissorsLower blade serrated with tapered with flat tips.

32-5907


32-5908


Scissors


Tesoura

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 9

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Edges PAR ScissorsDelicate with fine blades.

32-0911


32-0930


SNOWDEN-PENCER® Diamond-SerEdge PAR ScissorsLower blade serrated.

32-5911


32-5930


SNOWDEN-PENCER® Diamond-Edges STEVENS ScissorsDelicate blades with tapered tips.

32-0708


32-0709


SNOWDEN-PENCER® STEVENS Scissors

88-6121


88-6122

Straight. Overall length4-5/8in (11.7cm).

88-6123


Scissors



Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Edges DEVINE ScissorsScissors with sharp tips and short, heavy blades.

32-0703


SNOWDEN-PENCER® Diamond-Edges DEVINE-HORTON ScissorsScissors with sharp tips and short, heavy blades.

32-0933


SNOWDEN-PENCER® Diamond-Edges STRABISMUS ScissorsDelicate dissecting scissors with rounded tips.

32-0700


32-0701


SNOWDEN-PENCER® Diamond-SerEdge STRABISMUS ScissorsOne blade serrated to hold tissue.

32-5700


32-5701


Scissors


Tesoura

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 11

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Edges Supercut STRABISMUS Scissors

32-4700


32-4701


SNOWDEN-PENCER® Iris ScissorsRibbon-type scissors with fine blades.

88-6190


88-6191


88-6192


88-6193


SNOWDEN-PENCER® Diamond-Edges Iris ScissorsSharp-tipped scissors.

32-0705


32-0706


SNOWDEN-PENCER® Diamond-SerEdge Iris ScissorsLower blade serrated.

32-5705


32-5706


Scissors



Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Edges Supercut Iris Scissors

32-4705


32-4706


SNOWDEN-PENCER® Iris Swedish Pattern ScissorsGeneral-purpose Iris scissors with long blades and round shanks.

88-6110


88-6111


SNOWDEN-PENCER® Iris American Pattern ScissorsGeneral-purpose Iris scissors.

88-6113


88-6116


88-6117


SNOWDEN-PENCER® Diamond-SerEdge PECK-JOSEPH ScissorsDouble-beveled, serrated with semi-sharp tips.

32-5988


32-5990


Scissors


Tesoura

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 13

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-SerEdge Tebbetts™ Delicate Dissecting ScissorsSharp tips and serrated Tungsten Carbide blades.

32-5950


SNOWDEN-PENCER® Diamond-SerEdge GORNEY “Swan Neck” ScissorsSerrated Tungsten Carbide scissors with unique swan-neck bend in the shanks.

32-5942

Angled. Tungsten Carbide. Overall length4-1/2in (11.5cm).

SNOWDEN-PENCER® Diamond-SerEdge GIUNTA Double-Angled ScissorsTip scissors with serrated, double-beveled blades.

32-5943


SNOWDEN-PENCER® Diamond-SerEdge LOCKLIN ScissorsLower blade serrated.

32-5728


Scissors



Instrument Type

Table of contents

SNOWDEN-PENCER® SHEA ScissorsThin tips.

88-6135


SNOWDEN-PENCER® SEALY Scissors

88-6126


SNOWDEN-PENCER® Diamond-SerEdge Tebbetts™ ScissorsLonger blades are serrated.

32-5838


SNOWDEN-PENCER® Diamond-SerEdge KNIGHT ScissorsSerrated.

32-5837

Angled. Tungsten Carbide. Overall length7in (18cm).

Scissors


Tesoura

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 15

Instrument Type

Table of contents

SNOWDEN-PENCER® Converse Angled ScissorsAngled blades.

88-6118

Angled. Overall length4in (10cm).

SNOWDEN-PENCER® GUNTER Angled, Double-Beveled Blades ScissorsDouble-beveled blades with semi-sharp outer edges.

88-6119

Angled. Overall length3-3/4in (9.5cm).

SNOWDEN-PENCER® FOMON ScissorsStrongly curved blades.

88-6129

Strong curve. Overall length5-1/2in (14cm).

SNOWDEN-PENCER® DANIEL Tip ScissorsVery delicate angled blades.

88-6132


Scissors



Instrument Type

Table of contents

SNOWDEN-PENCER® JOSEPH Scissors

88-6127


SNOWDEN-PENCER® Diamond-SerEdge FOMON ScissorsAngled shanks.

32-5725


SNOWDEN-PENCER® Diamond-SerEdge COTTLE ScissorsHeavy serrated blades with angled shank.

32-5835


SNOWDEN-PENCER® Diamond-SerEdge CAPLAN ShearsShort, serrated blades with double action joint.

32-5998


Scissors


Tesoura

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 17

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-SerEdge GORNEY ShearsLong, serrated blades with double action joint.

32-5997

Angled. Tungsten Carbide. Overall length8in (20.5cm).

SNOWDEN-PENCER® Diamond-Edge DIETHRICH Scissors

32-0844

25º. Overall length7in (18cm).

32-0845


32-0846


32-0847


32-0848


SNOWDEN-PENCER® Diamond-SerEdge DIETHRICH ScissorsSerrated lower blade.

32-5844


32-5845


32-5846


32-5847


32-5848


SNOWDEN-PENCER® Diamond-SerEdge POTTS ScissorsSerrated blades.

32-5849

25º. Overall length7-1/4in (18.5cm).

32-5850


32-5851


Scissors



Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Edge Supercut POTTS Scissors

32-4849


32-4850


32-4851


SNOWDEN-PENCER® Stitch ScissorsRibbon-type scissors with very sharp points, large finger rings and flat shanks with no corners or edges.

88-6181


88-6182


SNOWDEN-PENCER® Suture ScissorsRibbon-type scissors with very sharp points, large finger rings and flat shanks with no corners or edges.

88-6180


SNOWDEN-PENCER® LITTLER ScissorsFeatures a hole in the distal part of the blade.

88-6175


Scissors


Tesoura

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 19

Instrument TypeScissors


Table of contents

SNOWDEN-PENCER® SPENCER Stitch Removal ScissorsDelicate suture removal scissors with crescent-shaped tip.

88-6176


SNOWDEN-PENCER® O’BRIEN Angled Stitch ScissorsSuture removal scissors with angles-to-side blades with sharp points.

88-6177


SNOWDEN-PENCER® LISTER Bandage ScissorsPopular general-purpose bandage scissors.

88-6241

Angled. Overall length5-1/2in (14cm).

88-6243


SNOWDEN-PENCER® Micro Straight ScissorsSerrated pattern with a round handle.

88-6500

Overall length6in (15cm).

88-6501

Serrated. Overall length6in (15cm).

88-6502

10mm diameter. Overall length7in (18cm).

88-6503

8mm diameter. Overall length7in (18cm).

88-6504

Serrated flat handle. Overall length6in (15cm).


Instrument TypeScissors


Tesoura

Table of contents

SNOWDEN-PENCER® Micro Dissecting ScissorsCurved blade blunted at the tip with serrated blades and a round handle.

88-6505


88-6506

Curved and serrated. Overall length6in (15cm).

88-6507


SNOWDEN-PENCER® Diamond-Lite Titanium Micro ScissorsFlat handle. Titanium micro scissors with short, delicate blades.

32-4605


32-4606


32-4608


32-4609


SNOWDEN-PENCER® Artery Scissors

88-6615


10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 21

Instrument Type

Table of contents

SNOWDEN-PENCER® UHLIG Flat Handle Scissors

88-6622


88-6625


88-6626


88-6627


88-9438


SNOWDEN-PENCER® UHLIG Round Handle Scissors

88-6623


88-6624


88-6635


88-6636


88-6637


SNOWDEN-PENCER® UHLIG Circumflex Flat Handle Scissors

88-6629


SNOWDEN-PENCER® UHLIG Circumflex ScissorsRound handle.

88-6639


88-9437


Scissors



Instrument Type

Table of contents

SNOWDEN-PENCER® Micro Bayonet Scissors

88-6646

45º. Overall length8-1/4in (21cm).

SNOWDEN-PENCER® Micro Circumflex Bayonet Scissors

88-6647


SNOWDEN-PENCER® Diamond-Jaw WEBSTER Needle HoldersDelicate smooth jaws.

32-0405

Smooth. Tungsten Carbide. Overall length4-1/2in (11.5cm).

32-0405-2

Left handed. Overall length4-1/2in (11.5cm).

SNOWDEN-PENCER® Diamond-Lite Titanium WEBSTER Needle Holder

32-4405

Micro DJ. Titanium. Overall length4-1/2in (11.5cm).

Scissors/Needle Holders

Ciseaux/Porte-aiguillesScheren/Nadelhalter

Forbici/Porta-agoTijeras/Sostenes de agujas

Tesoura/Porta-agulhas

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 23

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Jaw HALSEY Needle HoldersGeneral-purpose plastic surgery needle holders with long delicate jaws.

32-0410

4000 jaw. Tungsten Carbide. Overall length5in (13cm).

32-0410-2

Left handed. 4,000 teeth per square inch. Overall length5in (13cm).

32-0415

Smooth. Tungsten Carbide. Overall length5in (13cm).

32-0415-2

Smooth jaw. Left handed. Overall length5in (13cm).

SNOWDEN-PENCER® Diamond-Lite Titanium HALSEY Needle Holder

32-4410

Micro Diamond-Jaw. Titanium. Overall length5in (13cm).

SNOWDEN-PENCER® Diamond-Jaw PAR Needle HoldersExtremely delicate tips and fine teeth. 7,000 teeth per square inch.

32-0404

Overall length4-1/2in (11.5cm).

32-0404-2

Left handed. Overall length4-1/2in (11.5cm).

32-0414


SNOWDEN-PENCER® Diamond-Lite Titanium PAR Needle Holders

32-4404

Micro Diamond-Jaw. Overall length4-1/2in (11.5cm).

32-4414

Micro Diamond-Jaw. Overall length5in (13cm).

Needle Holders

Porte-aiguillesNadelhalterPorta-agoSostenes de agujasPorta-agulhas


Instrument Type

Table of contents

SNOWDEN-PENCER® Micro Diamond-Jaw Tebbetts™ Ultra-Delicate Needle HoldersLight action with fine tips.

32-5406

Angled handles. Micro jaw. Overall length4-3/4in (12cm).

32-5407

Straight handles. Micro jaw. Overall length4-3/4in (12cm).

SNOWDEN-PENCER® Diamond-Jaw Tebbetts™ Delicate Needle HoldersLight action with fine tips.

32-0409

7000 jaw. Overall length5-1/2in (14cm).

32-0427

4000 jaw. Overall length6-3/4in (17cm).

SNOWDEN-PENCER® Diamond-Jaw DERF Needle HolderDelicate short jaws. 4,000 teeth per square inch.

32-0400

Tungsten Carbide. Overall length4-3/4in (12cm).

SNOWDEN-PENCER® Diamond-Jaw NEIVERT Offset Needle HolderModified HALSEY with 1 ring angled. 4,000 teeth per square inch.

32-0420

Tungsten Carbide. Overall length5in (13cm).

Needle Holders

Porte-aiguillesNadelhalter

Porta-agoSostenes de agujas

Porta-agulhas

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 25

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Jaw Swedish Needle HolderDelicate tips with light shanks. 7,000 teeth per square inch.

32-0426


SNOWDEN-PENCER® Diamond-Jaw ROYER Needle HolderShort, delicate jaws and fine teeth. 7,000 teeth per square inch.

32-0402


SNOWDEN-PENCER® Diamond-Jaw DEVINE Needle HolderShort, delicate jaws and fine teeth. 7,000 teeth per square inch.

32-0403

Tungsten Carbide. Overall length4-1/2in (11.5cm).

SNOWDEN-PENCER® Diamond-Jaw RYDER Needle HoldersFine parallel jaws. Tungsten Carbide. 4,000 teeth per square inch.

32-0406


32-0416

Smooth. Overall length5in (13cm).

32-0206


32-0321


32-0321-2

Left handed. Overall length7in (18cm).

Needle Holders



Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Jaw RYDER Needle HoldersExtremely delicate pattern with 1mm wide parallel jaws. 7,000 teeth per square inch.

32-0465


32-0466


32-0466-2


32-0467


SNOWDEN-PENCER® Diamond-Lite Titanium RYDER Needle Holders

32-4466


32-4467


SNOWDEN-PENCER® Diamond-Jaw EUPHRATE-PASQUE Needle HoldersLight action with extremely delicate tapered jaws. 7,000 teeth per square inch.

32-0346


32-0347


32-0348


32-5346

Micro jaw. Tungsten Carbide. Overall length6in (15cm).

32-5347


SNOWDEN-PENCER® Diamond-Jaw Microvascular Needle HoldersDelicate, with fine, tapered points. 4,000 teeth per square inch.

32-0322


32-0431


Needle Holders



Porta-agulhas

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 27

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Jaw CRILE-WOOD Needle HoldersTungsten Carbide inserts. Medium jaw pattern. 4,000 teeth per square inch.

32-0430


32-0430-2


32-0435

Smooth. Overall length6in (15cm).

32-0320


32-0320-2


SNOWDEN-PENCER® Diamond-Lite Titanium CRILE-WOOD Needle Holder

32-4430


SNOWDEN-PENCER® Diamond-Jaw LEMMON Needle HolderDelicate with finely rounded tips. Tungsten Carbide inserts. 7,000 teeth per square inch.

32-0357

Overall length6-3/4in (17cm).

SNOWDEN-PENCER® Diamond-Jaw BAUMGARTNER Needle HoldersMayo HEGAR-type jaws. 2,500 teeth per square inch.

32-0110


32-0325

Overall length8in (20.5cm).

32-0325-2

Left handed. Overall length8in (20.5cm).

32-0350


32-0350-2

Straight. Left handed. Overall length9in (23cm).

Needle Holders



Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Jaw MAYO HEGAR Needle HoldersTungsten Carbide inserts. 2,500 teeth per square inch.

32-0120


32-0120-2


32-0130


32-0130-2


32-0140Overall length8in (21.5cm).

SNOWDEN-PENCER® Diamond-Jaw Wire Twisters Needle HoldersHeavy jaws provide holding ability for large diameter needles.

32-0121

Delicate. 2500 jaw. Tungsten Carbide. Overall length6in (15cm).

32-0122

Blunt. 2500 jaw. Tungsten Carbide. Overall length6in (15cm).

SNOWDEN-PENCER® Diamond-Jaw CORWIN Wire Twister Needle HolderBy releasing the finger rings and pulling on the center ring, the instrument rotates and uniformly twists the wire.

32-0123


SNOWDEN-PENCER® Diamond-Jaw OLSEN-HEGAR Needle HoldersCombination needle holder and scissors. 4,000 teeth per square inch.

32-0160


32-0160-2

Left handed. Overall length5-1/2in (14cm).

32-0170

Tungsten Carbide. Overall length6-1/2in (16.5cm).

32-0180


32-0140-2


32-0145


32-0145-2


32-0300


Needle Holders



Porta-agulhas

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 29

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Jaw OLSEN-WEBSTER Needle HoldersCombination needle holder and scissors with very delicate jaws.

32-0168

Smooth. Tungsten Carbide. Overall length4-1/2in (11.5cm).

32-0169

7000 jaw. Tungsten Carbide. Overall length4-1/2in (11.5cm).

32-5167

Micro jaw. Tungsten Carbide. Overall length4-1/2in (11.5cm).

SNOWDEN-PENCER® Diamond-Jaw FOSTER-GILLIES Needle HoldersCombination needle holder and scissors with very delicate jaws. 7,000 teeth per square inch.

32-0423


32-0424


SNOWDEN-PENCER® Diamond-Jaw GILLIES Needle HolderNeedle holder/scissors combination. 4,000 teeth per square inch.

32-0425


SNOWDEN-PENCER® Diamond-Jaw Tebbetts™ Bayonet Needle HolderRound handle bayonet needle holder. 7,000 teeth per square inch.

32-0395


Needle Holders



Instrument Type

Table of contents

SNOWDEN-PENCER® Micro Diamond-Points Needle HoldersExtremely fine jaws (0.4 mm tip) incorporating a flattened tip and curved jaw.

88-6525


88-6526


88-6527


88-6528


SNOWDEN-PENCER® Micro Diamond-Jaw Delicate CASTROVIEJO Needle HoldersRound handle with extremely delicate jaws.

32-5491


32-5492


88-6529


88-6530


88-6531


SNOWDEN-PENCER® Micro Diamond-Jaw RYDER-CASTROVIEJO Needle HoldersRound handle. Delicate RYDER jaws.

32-5497


32-5498


SNOWDEN-PENCER® Micro Diamond-Jaw RYDER-CASTROVIEJO Needle HolderFlat handle with delicate jaws.

32-5458

Micro jaw. Overall length7in (18cm).

32-5459

Overall length 8-1/2in (21.5cm).

SNOWDEN-PENCER® Micro Diamond-Jaw Delicate CASTROVIEJO Needle HoldersFlat handle with extremely delicate jaws.

32-5454

Micro jaw. Overall length5-1/4in (14cm).

32-5455


Needle Holders



Porta-agulhas

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 31

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Lite Titanium CASTROVIEJO Needle HoldersRound handle with delicate jaws. Micro Diamond-Jaw.

32-4484


32-4485


32-4478


32-4486


SNOWDEN-PENCER® Diamond-Jaw CASTROVIEJO Needle HoldersRound handle. Curved jaws.

32-0481


32-5478


32-5485


SNOWDEN-PENCER® Diamond-Jaw CASTROVIEJO Round Handle Needle HoldersStraight. Fine jaws.

32-0480


32-0482

7000 jaw. Tungsten Carbide. Overall length7-1/4in (18.5cm).

32-5484


32-5486


SNOWDEN-PENCER® Micro Diamond-Jaw Needle HolderFine-tipped pattern with light action spring handles.

32-5470


SNOWDEN-PENCER® Micro Diamond-Jaw CASTROVIEJO Needle HolderRound handle.

32-5487


32-5479


32-5476


32-5477Curved. Overall length9in (23cm).

32-5460


SNOWDEN-PENCER® Micro Diamond-Jaw CASTROVIEJO Flat Handle Needle Holder

32-5447


32-5462


32-5463


Needle Holders



Instrument Type

Table of contents

SNOWDEN-PENCER® RYDER-CASTROVIEJO Needle HolderFlat handle.

32-5499


SNOWDEN-PENCER® Diamond-Jaw CASTROVIEJO Needle HoldersFlat handle. Spring handle with unique catch mechanism and fine jaws.

32-0440

7000 jaw. Tungsten Carbide. Overall length5-1/4in (14cm).

32-0444


32-0445

Smooth. Tungsten Carbide. Overall length5-1/4in (14cm).

32-0448

Smooth. Tungsten Carbide. Overall length7in (18cm).

32-5445

Micro jaw. Tungsten Carbide. Overall length5-1/4in (14cm).

32-5448


32-5446

Curved micro jaw. Tungsten Carbide. Overall length5-1/2in (14cm).

SNOWDEN-PENCER® Diamond-Jaw CASTROVIEJO Needle HoldersRound handle. 7,000 teeth per square inch.

32-0476


32-0479


32-0483


SNOWDEN-PENCER® Diamond-Jaw CASTROVIEJO Needle HoldersFlat handle.

32-0442

7000 jaw. Overall length8-1/2in (21.5cm).

32-0447

Smooth jaw. Overall length8-1/2in (21.5cm).

SNOWDEN-PENCER® CASTROVIEJO Delicate Flat Handle Needle Holder

32-5456


Needle Holders



Porta-agulhas

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 33

Instrument Type

Table of contents

SNOWDEN-PENCER® MILLS Distal Captain Hook Needle Holders

32-5397


32-5398


SNOWDEN-PENCER® JACOBSON Needle Holder

32-5471


SNOWDEN-PENCER® Diamond-Lite Delicate CASTROVIEJO Needle HolderTitanium. Round handle. Straight jaws. 4,000 teeth per square inch.

32-4490


SNOWDEN-PENCER® Diamond-Lite Titanium CASTROVIEJO Delicate Needle HoldersMicro Diamond-Jaw.

32-4447


32-4448


SNOWDEN-PENCER® Diamond-Lite Titanium CASTROVIEJO Delicate Forceps

32-4479

Curved. Round handle. Overall length8-1/4in (18.5cm).

32-4487

Straight. Round handle. Overall length8-1/4in (21cm).

SNOWDEN-PENCER® CASTROVIEJO Delicate Needle Holders

32-5493


32-5494


Needle Holders



Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Jaw NEW ORLEANS Needle Holder2,500 teeth per square inch.

32-0150


SNOWDEN-PENCER® Diamond-Jaw Needle Holder2,500 teeth per square inch.

32-0132


SNOWDEN-PENCER® Diamond-Jaw BERRY Needle Holder2,500 teeth per square inch.

32-0135


SNOWDEN-PENCER® Diamond-Jaw MATHIEU French Eye Needle Holder2,500 teeth per square inch.

32-0190


SNOWDEN-PENCER® Diamond-Jaw French Eye Needle Holders2,500 teeth per square inch.

32-0200


32-0200-2


32-0210


32-0210-2


32-0220


32-0220-2


Needle Holders



Porta-agulhas

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 35

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Jaw Micro Needle Holder4,000 teeth per square inch.

32-0327


32-0352


32-0367


SNOWDEN-PENCER® Diamond-Lite Titanium RYDER Needle Holder

32-4468


SNOWDEN-PENCER® Diamond-Jaw RYDER Needle Holder

32-0326

4000 jaw. Overall length8in (20.5cm).

32-0366


32-0468


32-0469

7000 jaw. Overall length9in (23cm).

SNOWDEN-PENCER® Diamond-Jaw ROCHESTER Needle Holder4,000 teeth per square inch.

32-0323


SNOWDEN-PENCER® Diamond-Jaw CRILE-WOOD Needle Holder4,000 teeth per square inch.

32-0310

Straight. Overall length12in (20.5cm).

32-0365


SNOWDEN-PENCER® Diamond-Jaw STRATTE Needle HoldersStandard curve. 2,500 teeth per square inch.

32-0251


32-0255


Needle Holders



Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Jaw Extra-light DeBAKEY Needle Holders7,000 teeth per square inch.

32-0041


32-0042


32-0043


32-0044


SNOWDEN-PENCER® Diamond-Jaw DeBAKEY Needle Holders4,000 teeth per square inch.

32-0010


32-0020


32-0030


32-0040


SNOWDEN-PENCER® Diamond-Jaw BOZEMAN Needle Holder2,500 teeth per square inch.

32-0380


SNOWDEN-PENCER® Diamond-Jaw LEMMON Needle Holder7,000 teeth per square inch.

32-0358


SNOWDEN-PENCER® Diamond-Jaw SAROT Needle Holder4,000 teeth per square inch.

32-0340


32-0370


SNOWDEN-PENCER® Diamond-Jaw JULIAN Needle Holder

32-0328

Straight. 4000 jaw. Overall length8in (20.5cm).

Needle Holders



Porta-agulhas

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 37

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Lite Titanium EUPHRATE-PASQUE Needle Holder

32-4347


SNOWDEN-PENCER® Diamond-Lite Titanium DeBAKEY Needle Holders4,000 teeth per square inch.

32-4125


32-4127


SNOWDEN-PENCER® Diamond-Jaw BOZEMAN Needle Holder4,000 teeth per square inch.

32-0390


SNOWDEN-PENCER® Diamond-Jaw HEANEY Needle Holders2,500 teeth per square inch.

32-0230


Needle Holders



Instrument Type

Table of contents

SNOWDEN-PENCER® Double Action Needle Holder

32-5374

Overall length8-1/4 (21cm).

SNOWDEN-PENCER® Diamond-Points ADSON Teeth ForcepsGeneral-purpose forceps with wide jaw surface. 1 x 2 teeth.

32-05014000 jaw. Overall length4-3/4in (12cm).

32-0558


SNOWDEN-PENCER® ADSON Dressing Cross-Serrated ForcepsStainless steel with cross-serrated jaws.

88-0027

Cross serrated jaw. Overall length4-3/4in (12cm).

SNOWDEN-PENCER® ADSON Dressing ForcepsStainless steel with serrated jaws.

88-0026

9mm serrated jaw. Overall length4-3/4in (12cm).

88-0035

1.2mm serrated jaw. Overall length4-3/4in (12cm).

SNOWDEN-PENCER® Diamond-Lite Titanium ADSON ForcepsLightweight, delicate general-purpose forceps with serrated jaw.

32-4515

Serrated jaw. Overall length4-3/4in (12cm).

SNOWDEN-PENCER® Diamond-Points ADSON ForcepsGeneral-purpose forceps with wide gripping surface.

32-0500


32-0556


Needle Holders/Thumb Forceps

Porte-aiguilles/Pince à dissectionNadelhalter/DaumenzangePorta-ago/Pinze da polliceSostenes de agujas/Pinzas

Porta-agulhas/Fórceps de polegar

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 39

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Points HORTON-ADSON ForcepsDelicate tip and 1x2 teeth for grasping. 7,000 teeth per square inch.

32-0503Tungsten Carbide. Overall length4-3/4in (12cm).

32-0559


SNOWDEN-PENCER® BROWN-ADSON ForcepsStainless steel with small multiple teeth.

88-0045

BROWN teeth. Overall length4-3/4in (12cm).

SNOWDEN-PENCER® Diamond-Lite Titanium BROWN-ADSON ForcepsSmall multiple teeth. 4,000 teeth per square inch.

32-4502


SNOWDEN-PENCER® Diamond-Points BROWN-ADSON ForcepsSmall multiple teeth. 4,000 teeth per square inch.

32-0502


32-0514


SNOWDEN-PENCER® ADSON Tissue 1x2 Teeth ForcepsStainless steel with 1x2 teeth.

88-0036

9mm. Overall length4-3/4in (12cm).

88-0037

9mm tip with suture. Overall length4-3/4in (12cm).

SNOWDEN-PENCER® Diamond-Lite Titanium ADSON ForcepsLightweight, delicate general-purpose forceps with 1x2 teeth and serrated jaw.

32-4517

Serrated jaw. Titanium. Overall length4-3/4in (12cm).

Thumb Forceps

Pince à dissectionDaumenzangePinze da pollicePinzasFórceps de polegar


Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Points PAR ForcepsFine tips with Diamond-Jaw insert provide secure grip. 7,000 teeth per square inch.

32-0504


SNOWDEN-PENCER® Diamond-Lite Titanium PAR Forceps7,000 teeth per square inch.

32-4504


SNOWDEN-PENCER® Diamond-Lite Titanium GORNEY-ADSON Forceps1x2 teeth. 7,000 teeth per square inch.

32-4511

Micro jaw. Overall length4-3/4in (12 cm).

SNOWDEN-PENCER® Micro Diamond-Jaw GORNEY-ADSON 1x2 Teeth ForcepsExtremely fine 1x2 teeth with Micro Diamond-Jaw tying platform.

32-5511

Micro jaw. Overall length4-3/4in (12cm).

SNOWDEN-PENCER® Diamond-Points Delicate ADSON ForcepsDelicate tip with smooth jaw.

32-0505

Smooth. Overall length4-3/4in (12cm).

32-0557


SNOWDEN-PENCER® Diamond-Lite Titanium HORTON-ADSON Forceps7,000 teeth per square inch.

32-4503


Thumb Forceps

Pince à dissectionDaumenzange

Pinze da pollicePinzas

Fórceps de polegar

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 41

Instrument Type

Table of contents

SNOWDEN-PENCER® Iris Tissue 1x2 Teeth ForcepsDelicate forceps.

88-0059

1x2 teeth. Overall length4in (10.5cm).

SNOWDEN-PENCER® CASTROVIEJO-BROWN ForcepsCASTROVIEJO-type forcep with fine BROWN teeth provides multiple fixation points.

88-0075

BROWN teeth. Overall length4-1/2in (11cm).

SNOWDEN-PENCER® Diamond-Lite CASTROVIEJO Titanium Forceps

32-4506

3mm tip. Micro jaw. Overall length4in (10.5cm).

32-4507


32-4508


SNOWDEN-PENCER® Micro Diamond-Jaw CASTROVIEJO ForcepsExtremely delicate tissue forceps with fine teeth and Micro Diamond-Jaw tying platform.

32-5506


32-5507


32-5508


32-5509

1.5mm tip. Micro jaw. Overall length4in (10.5cm).

SNOWDEN-PENCER® Micro Diamond-Jaw Tebbetts™ Delicate ForcepsFine teeth and Micro Diamond-Jaw tying platform.

32-5515

5mm tip. Micro jaw. Overall length4-3/4in (12cm).

32-5516

9mm tip. Micro jaw. Tungsten Carbide. Overall length4-3/4in (12cm).

SNOWDEN-PENCER® Micro Diamond-Jaw Tebbetts™ BROWN ForcepsFine multiple teeth.

32-5518

Micro jaw. Tungsten Carbide. Overall length4-3/4in (12cm).

Thumb Forceps



Instrument Type

Table of contents

SNOWDEN-PENCER® McINDOE Dissecting ForcepsFine, serrated jaws.

88-0060

Serrated jaw. Overall length6in (15cm).

SNOWDEN-PENCER® Diamond-Points SEMKEN ForcepsFine 1x2 teeth.

32-0577


SNOWDEN-PENCER® GREEN Fixation ForcepsFine multiple teeth.

88-0080

5mm tip. Overall length4in (10cm).

88-0081


88-0082


SNOWDEN-PENCER® BISHOP-HARMON ForcepsLight action forceps.

88-0070

4mm tip. 1x2 teeth. Overall length3-1/2in (9cm).

88-0071

6mm tip. 1x2 teeth. Overall length3-1/2in (9cm).

SNOWDEN-PENCER® JULIAN Suture ForcepsSmooth jaws on a raised platform.

88-0057

Smooth jaw. Overall length4-3/8in (11cm).

SNOWDEN-PENCER® Iris Dressing Forceps

88-0058


Thumb Forceps



Fórceps de polegar

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 43

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Points CUSHING Angled ForcepsTips angled at 45º. 4,000 teeth per square inch.

32-0521


SNOWDEN-PENCER® Diamond-Lite Titanium CUSHING ForcepsLightweight, delicate CUSHING forcep with serrated jaws.

32-4520


SNOWDEN-PENCER® Diamond-Points CUSHING Forceps4,000 teeth per square inch.

32-0520


SNOWDEN-PENCER® Diamond-Points BROWN ForcepsSmall. Multiple teeth. 4,000 teeth per square inch.

32-0516


SNOWDEN-PENCER® Diamond-Points General Forceps2,500 teeth per square inch.

32-0510


SNOWDEN-PENCER® GILLIES Dissecting ForcepsFine jaws and delicate 1x2 teeth.

88-0061


Thumb Forceps



Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Lite GERALD Forceps

32-4570


SNOWDEN-PENCER® Diamond-Points GERALD ForcepsDelicate, tapered 1mm tip. 7,000 teeth per square inch.

32-0570


32-0571

1x2 teeth. Tungsten Carbide. Overall length7in (18cm).

SNOWDEN-PENCER® Diamond-Points POTTS-SMITH Forceps4,000 teeth per square inch.

32-0526


32-0530


SNOWDEN-PENCER® Diamond-Points BONNEY ForcepsStrong, heavy-toothed forcep. 1x2 teeth. 2,500 teeth per square inch.

32-0518


SNOWDEN-PENCER® CUSHING-BROWN ForcepsCushing forceps with BROWN-type teeth with scraper end.

88-0047

BROWN teeth. Overall length7in (18cm).

SNOWDEN-PENCER® Diamond-Points CUSHING Bayonet ForcepsShanks bayoneted (offset). 4,000 teeth per square inch.

32-0525


Thumb Forceps



Fórceps de polegar

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 45

Instrument Type

Table of contents

Due to changing surgical trends, some products described in this catalog may be discontinued. Your sales representa-tive may be able to suggest a suitable substitute if one is available.

SNOWDEN-PENCER® DeBAKEY ForcepsDeBAKEY serrations.

88-9440

1.5mm jaw. Overall length6in (15cm).

88-9443


88-9446


88-9888

2.7mm jaw. Overall length6-1/4in (16cm).

88-9892


SNOWDEN-PENCER® Diamond-Lite DeBAKEY Titanium ForcepsDeBAKEY serrations.

32-4170

1.5mm tip. Overall length6in (15cm).

32-4171

1.5mm tip. Overall length7-3/4in (19.5cm).

32-4172

1.5mm tip. Overall length9-1/2in (24cm).

32-4174

2.3mm tip. Overall length7-3/4in (19.5cm).

SNOWDEN-PENCER® Diamond-Points SKINNER Forceps1x2 teeth. Diamond-Jaw inserts placed behind the teeth.

32-0539


88-9941


88-9444


88-9447


88-9889


88-9893


88-9445


88-9448


88-9890


88-9894


88-9898

1.5mm jaw. Overall length12in (30.5cm).

88-9897


88-9891


Thumb Forceps



Instrument Type

Table of contents

SNOWDEN-PENCER® Micro Diamond-Jaw Jeweler’s Forceps

32-5541

Micro jaw. Dilator 4-1/2in (11.5cm). Tungsten Carbide.

32-5543

Size #3. Micro jaw. Tungsten Carbide. Overall length4-1/2in (11.5cm).

32-5544


32-5545


SNOWDEN-PENCER® LUCAE Dressing ForcepsStainless steel with serrated jaws.

88-0053

Serrated jaw. Overall length5-1/2in (14cm).

SNOWDEN-PENCER® GRUENWALD Dressing Bayonet ForcepsLong shanks.

88-0056

Serrated jaw. Overall length8in (20.5cm).

SNOWDEN-PENCER® Diamond-Jaw Tebbetts™ Bayonet ForcepsRound-handled bayonet forceps feature multiple BROWN-style teeth.

32-0523


88-0077

BROWN teeth. Tungsten Carbide. Overall length7-3/4in (20cm).



Fórceps de polegar

Thumb Forceps

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 47

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Points GERALD Round Handle Forceps7,000 teeth per square inch.

32-0574

Round handle. Overall length7in (18cm).

32-0575

Round handle. Overall length8-1/4in (21cm).

SNOWDEN-PENCER® Micro Diamond-Points GERALD Forceps7,000 teeth per square inch.

32-0569


SNOWDEN-PENCER® Diamond-Points CHITWOOD-DeBAKEY ForcepsTungsten carbide inserts. 7,000 teeth per square inch.

32-0560


32-0567


32-0561


32-0568


32-0562


SNOWDEN-PENCER® Micro Dilator ForcepsParallel, flattened tips with round handle.

88-6541


88-6546

Angled. Overall length7in (18cm).

SNOWDEN-PENCER® Micro PIERSE Forceps

88-6540


88-6542


SNOWDEN-PENCER® Micro ForcepsExtremely fine tip.

88-6543

Angled platform. Overall length7in (18cm).

88-6544

Straight. No platform. Overall length7in (18cm).

88-6545

Straight platform. Overall length7in (18cm).

ForcepsZangenPinzeFórcepsFórceps

Forceps

48 Instrument pictured Most widely used patterns

Instrument Type

Table of contents

SNOWDEN-PENCER® Micro Diamond-Lite Titanium Forceps

32-4558

Straight. Round handle. Overall length6in (15cm).

32-4590


32-4591


32-4592

Straight. Round handle. Overall length8-1/4in (21cm).

32-4593

Curved. Flat handle. Overall length8-1/4in (21cm).

SNOWDEN-PENCER® Micro Diamond-Lite Titanium GERALD Forceps7,000 teeth per square inch.

32-4569


SNOWDEN-PENCER® Diamond-Lite Titanium CHITWOOD-DEBAKEY Forceps7,000 teeth per square inch.

32-4561


SNOWDEN-PENCER® Diamond-Lite Titanium DeBAKEY Micro Round Handle ForcepsRound handle.

32-4177


32-4178


SNOWDEN-PENCER® Diamond-Touch Distal ForcepsRound handle. Micro Diamond-Jaw.

32-5580


32-5581


32-5582


SNOWDEN-PENCER® Micro Diamond-Jaw Forceps

32-5530


32-5558


32-5590


32-5591


32-5592

Straight. Overall length8-1/4 (21cm).

32-5593


SNOWDEN-PENCER® Micro Diamond-Jaw Artery Forceps

32-5594


32-5598


SNOWDEN-PENCER® Micro Diamond-Jaw Titanium Artery Forceps

32-4594

Straight. Flat handle. Overall length 7in (18cm).

32-4598

Straight. Flat handle. Overall length 8-1/4in (21cm).

ForcepsZangen

PinzeFórcepsFórceps

Forceps

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 49

Instrument Type

Table of contents

SNOWDEN-PENCER® Micro Diamond-Jaw MILLS Proximal Ring Forceps

32-5587


32-5589

Round handle. Titanium. Overall length8-1/4in (21cm).

SNOWDEN-PENCER® Micro Diamond-Jaw MILLS Distal Ring Forceps

32-5584


32-5586


32-5588


32-5560


SNOWDEN-PENCER® Diamond-Touch MILLS Distal Ring ForcepsRound handle. Micro Diamond-Jaw.

32-5578


32-5579


SNOWDEN-PENCER® MILLS Distal Ring ForcepsFlat handle.

32-5528


SNOWDEN-PENCER® Diamond-Lite Titanium MILLS Distal Ring ForcepsTitanium. 4,000 teeth per square inch.

32-4521


32-4578


32-4579


32-4580


32-4586


32-4588


SNOWDEN-PENCER® Micro DeBAKEY Forceps

88-0188


88-0189



Forceps


Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Points GERALD Forceps7,000 teeth per square inch.

32-0572


SNOWDEN-PENCER® Diamond-Points CLINIC-GOLD Forceps7,000 teeth per square inch.

32-0528


SNOWDEN-PENCER® Diamond-Lite Titanium MILLS Proximal Ring ForcepsRound handle.

32-4587


32-4589


SNOWDEN-PENCER® Delicate Mosquito HemostatsLightweight mosquito forceps with fine jaw.

88-0307

Short jaw. Curved. Overall length 4-1/2in (11.5cm).

88-0309

Regular jaw. Curved. Overall length4-1/2in (11.5cm).

88-0310

Regular jaw. Straight. Overall length 5-3/4in (14.5cm).

88-0311

Regular jaw. Curved. Overall length5-3/4in (14.5cm).

SNOWDEN-PENCER® Diamond-Lite Titanium Mosquito Hemostats

32-4300


32-4301


32-4302


32-4303

Curved. Overall length5in (12.5cm).

Forceps/Hemostats

Forceps/Pinces hémostatiquesZangen/Gefäßklemmen (Hämostat)

Pinze/Pinze emostaticheFórceps/Hemostatos

Fórceps/Pinças hemostáticas

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 51

Instrument Type

Table of contents

SNOWDEN-PENCER® HARTMAN Mosquito Hemostats

88-0300


88-0301


88-0302


88-0303

Curved. Overall length5in (12.5cm).

SNOWDEN-PENCER® General Forceps

88-0425


SNOWDEN-PENCER® ADSON HemostatLong hemostat with strong curve.

88-0358


SNOWDEN-PENCER® Crile HemostatsFeatures serrations over the entire jaw.

88-0317


88-0319


SNOWDEN-PENCER® KELLY HemostatsFeature serrations over half the length of the jaws.

88-0313


88-0314


Hemostats/Forceps

Pinces hémostatiques/ForcepsGefäßklemmen (Hämostat)/ZangenPinze emostatiche/PinzeHemostatos/FórcepsPinças hemostáticas/Fórceps


Instrument Type

Table of contents

SNOWDEN-PENCER® JULIAN Mosquito HemostatExtra delicate.

88-0359


SNOWDEN-PENCER® ALLIS HemostatsDelicate teeth.

88-0349

Overall length 5-1/2in (14cm).

88-0350


SNOWDEN-PENCER® Fixation Forceps

88-0427


Pinces hémostatiques/ForcepsGefäßklemmen (Hämostat)/Zangen

Pinze emostatiche/PinzeHemostatos/Fórceps

Pinças hemostáticas/Fórceps

Hemostats/Forceps

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 53

Instrument Type

Table of contents

SNOWDEN-PENCER® D’ASSUMPCAO ForcepsOverall length 6-1/4in (16cm).

88-2325

Without ratchet.

88-2326

With ratchet.

SNOWDEN-PENCER® LAHEY Hemostat

88-0363


SNOWDEN-PENCER® Diamond-Jaw BABCOCK Tissue Forceps2,500 teeth per square inch.

32-0580


32-0585


SNOWDEN-PENCER® PITANGUY Grasping ForcepsTwo protruding teeth with opposing apertures.

88-0365


SNOWDEN-PENCER® EDNA Towel HemostatsNon-perforating jaws.

88-0344


88-0345


Forceps/Hemostats

Forceps/Pinces hémostatiquesZangen/Gefäßklemmen (Hämostat)Pinze/Pinze emostaticheFórceps/HemostatosFórceps/Pinças hemostáticas


Instrument Type

Table of contents

SNOWDEN-PENCER® BACKHAUS Towel HemostatsSharp, pointed tips overlap.

88-0342


SNOWDEN-PENCER® FOERSTER Sponge-Holding Forceps

88-0347


SNOWDEN-PENCER® Tebbetts™ Platform Forceps

88-0677


SNOWDEN-PENCER® JANSEN Middleton ForcepsLarge, fenestrated jaws.

88-0852


Forceps/Hemostats

Forceps/Pinces hémostatiquesZangen/Gefäßklemmen (Hämostat)

Pinze/Pinze emostaticheFórceps/Hemostatos

Fórceps/Pinças hemostáticas

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 55

Instrument Type

Table of contents

SNOWDEN-PENCER® BEYER ForcepsDelicate. Double-action.

88-3010

3mm jaw. Overall length7in (18cm).

SNOWDEN-PENCER® Tebbetts™ ForcepsFine tips.

88-3015


SNOWDEN-PENCER® ASCH Straightening Forceps

88-0860


SNOWDEN-PENCER® TAKAHASHI Cutting ForcepsLong and slender shaft.

88-3050

2.5mm bite. 5-1/2in (14.5cm) shaft length.

Forceps



Instrument Type

Fiberoptic Panels

88-1006KOverall length 4in (10cm).

88-1005K

Overall length 5in (12.5cm).

88-1004KOverall length 6in (15cm).

Table of contents

SNOWDEN-PENCER® KLEINERT-KUTZ Forceps

88-3012


88-3013


SNOWDEN-PENCER® Diamond-View Retractor System RetractorsSpecial blade (18cm x 2cm). Single-use fiberoptic light panel easily slides onto the retractor bar and provides full illumination along the blade.

88-1003


88-1002


88-1001


SNOWDEN-PENCER® Tebbetts™ Fiberoptic RetractorsSuction capability to provide for smoke evacuation.

88-1086

9cm x 30mm blade.

88-10879cm x 24mm blade.

88-108815cm x 30mm blade.

88-1090

19cm x 30mm blade.

88-1186

9cm x 30mm blade without teeth.

88-1187


88-118815cm x 30mm blade without teeth.

88-1190


SNOWDEN-PENCER® Tebbetts™ Double-Ended RetractorVersatile double-ended retractor with serrated blades.

88-1080


88-97607.5ft fiberoptic light cable. Overall length3.5mm. Acmi/Acmi.

Forceps/Retractors

Forceps/ÉcarteursZangen/Wundspreizer/Retraktoren

Pinze/DivaricatoriFórceps/Separadores

Fórceps/Retratores

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 57

Instrument Type

Table of contents

SNOWDEN-PENCER® COTTLE RetractorTwo sharp prongs.

88-1508


SNOWDEN-PENCER® Tebbetts™ AUFRICHT RetractorDesigned with a custom curve and stabilizing teeth at the tip.

88-1079


SNOWDEN-PENCER® Tebbetts™ Ribbon Retractor

88-1078


SNOWDEN-PENCER® BROMLEY Retractor

88-1035


SNOWDEN-PENCER® HAMRA RetractorDouble-ended retractor with a 2cm blade at 1 end and a 1cm blade at the other.

88-1120


SNOWDEN-PENCER® Tebbetts™ Spatula RetractorSemi-malleable.

88-1082

1in x 6in blade. Overall length12-1/2in (31.5cm).

Retractors

ÉcarteursWundspreizer/RetraktorenDivaricatoriSeparadoresRetratores


Instrument Type

Table of contents

SNOWDEN-PENCER® Tip Retractor

88-1021


SNOWDEN-PENCER® Tebbetts™ Skin RetractorRounded. Tapered edges with grooved, concave tip.

88-1077


SNOWDEN-PENCER® FOMON Double Ball End Retractor

88-1014


SNOWDEN-PENCER® CONVERSE RetractorsDelicate retractor with concave blade. Handle design with curved end. Also available with fiberoptic attachment.

88-1025


88-1026

With fiberoptics. Overall length2in (5cm).

88-1027

45mm tapered blade. Overall length7in (18cm).

SNOWDEN-PENCER® AUFRICHT RetractorPopular retractor with concave blade.

88-1028

45mm tapered blade with fiberoptics. Overall length7in (18cm).

Retractors

ÉcarteursWundspreizer/Retraktoren

DivaricatoriSeparadores

Retratores

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 59

Instrument Type

Table of contents

SNOWDEN-PENCER® WEITLANIER Retractors

88-1215

2 x 3 sharp prongs. Overall length4-1/2in (11.5cm).

88-1219

3 x 4 sharp prongs. Overall length5-1/2in (14cm).

SNOWDEN-PENCER® FREEMAN RetractorTip is slightly curved downward.

88-1068

1/2in (12mm) blade width. Overall length8in (20.5cm).

SNOWDEN-PENCER® RetractorAngled tip.

88-1070

7-1/2in (19cm) x 7/8in (23mm) blade.

SNOWDEN-PENCER® BIGGS RetractorsFenestrated blade.

88-1071

Standard blade (2in width).

88-1073

Narrow blade (1.2in width).

Retractors



Instrument Type

Table of contents

SNOWDEN-PENCER® DEAVER RetractorsGeneral-purpose retractor.

88-1150

3/4in (1.9cm) x 7in (18cm).

88-1151

1in (2.5cm) x 8in (20.5cm).

88-1152

1in (2.5cm) x 12in (30.5cm).

SNOWDEN-PENCER® U.S. Army RetractorSet of 2 general-purpose retractors.

88-1164


SNOWDEN-PENCER® MAXWELL Flap RetractorsShort handle with finger hold.

88-1092

1-1/2in (38mm) wide. Overall length4in (10cm).

88-1093

7/8in (22mm) wide. Overall length4in (10cm).

SNOWDEN-PENCER® FREEMAN Rake Retractors4-prong retractor. Features two recessed inner prongs.

88-1066

7in (18cm) x 1-1/2in (38mm) wide.

88-1067

7in (18cm) x 0.7/8in (22mm) wide.

Retractors



Retratores

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 61

Instrument Type

Table of contents

SNOWDEN-PENCER® ANDERSON Bear Claw Retractors

88-1046

3 prong. Overall length4-3/4in (12cm).

88-1047

5 prong. Overall length4-3/4in (12cm).

SNOWDEN-PENCER® RetractorAngled tip.

88-1063

4-1/2in (12cm) x 7/8in (2.3cm) blade.

SNOWDEN-PENCER® GORNEY Rake Retractor

88-1064

38mm wide. Overall length3in (7.5cm).

SNOWDEN-PENCER® DesMARRES Lid Retractors

88-1055


88-1055-1

9mm. Insulated. Overall length5-1/2in (14cm).

88-1056


88-1056-1


88-1057


88-1057-1


88-1058


88-1058-1


Retractors



Instrument Type

Table of contents

SNOWDEN-PENCER® KASDEN RetractorCurved. Thin blades.

88-1052


SNOWDEN-PENCER® SENN RetractorsOverall length 6-1/4in (15.8cm).

88-1050

Sharp.

88-1051

Blunt.

SNOWDEN-PENCER® RAGNELL-DAVIS RetractorRAGNELL retractor with round-knurled handle.

88-1054


SNOWDEN-PENCER® RAGNELL RetractorDelicate, double-ended retractor.

88-1053


SNOWDEN-PENCER® MILLER Rake Retractor

88-1043

9 sharp prongs. Overall length5-1/4in (13.5cm).

SNOWDEN-PENCER® ROLLET RetractorDelicate retractor with four sharp prongs.

88-1045


Retractors



Retratores

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 63

Instrument Type

Table of contents

SNOWDEN-PENCER® Stainless COTTLE Knife Guard Retractor

88-1011


SNOWDEN-PENCER® Tebbetts™ Spatulated Retractor

88-3704


SNOWDEN-PENCER® Tebbetts™ Angulated RetractorTapered edge blade with a straight shaft.

88-3703


SNOWDEN-PENCER® DINGMAN Mouth GagThree tongue blades which are grooved.

88-1225

Retractors



Instrument Type

Table of contents

SNOWDEN-PENCER® “T” Dissector

88-5077


SNOWDEN-PENCER® Parietal Elevator/Dissector

88-5084


SNOWDEN-PENCER® Dissector, Curved

88-5086


SNOWDEN-PENCER® Dissector, Straight

88-5085


SNOWDEN-PENCER® PITIE-SALPETRIERE RetractorsAngled blades with DeBAKEY teeth.

89-2403

Angled blade. Overall length8in (20cm).

89-2407


SNOWDEN-PENCER® 7-Prong Retractor

88-1062


Retractors/Dissectors

Écarteurs/DissecteursWundspreizer/Retraktoren/Dissektoren

Divaricatori/DissettoriSeparadores/Diseccionadores

Retratores/Escalpelos

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 65

Instrument Type

Table of contents

SNOWDEN-PENCER® DissectorMultiple curvatures of shaft.

88-5076


SNOWDEN-PENCER® Elevator

88-5083


SNOWDEN-PENCER® Flap Dissector

88-5082


SNOWDEN-PENCER® Spreader

88-5080


SNOWDEN-PENCER® Dissector

88-5081


SNOWDEN-PENCER® Dissector

88-5075


Dissectors

DissecteursDissektorenDissettoriDiseccionadoresEscalpelos


Instrument Type

Table of contents

SNOWDEN-PENCER® Electrosurgical DissectorsUniversal handle fits most dissectors.

88-5225

Curved left shaft. Straight tip. Overall length14-1/2in (36.5cm).

88-5226

Curved right shaft. Straight tip. Overall length14-1/2in (36.5cm).

88-5227

Right and left curved shaft. Straight tip. Overall length14-1/2in (36.5cm).

SNOWDEN-PENCER® DissectorBilateral design.

88-5220


SNOWDEN-PENCER® Dissector, CurvedCurved rounded tip.

88-5061

Curved. Overall length 9-1/4in (23.5cm).

SNOWDEN-PENCER® DissectorExtra-sharp tip with tapered edges.

88-5053

Half curved. Overall length 9-1/4in (23.5cm).

SNOWDEN-PENCER® Sharp Tip DissectorTapered and sharp-tipped.

88-5052

Half Curved. Overall length9-1/4in (23.5cm).

88-5228

Straight shaft. Angled tip. Overall length14-1/2in (36.5cm).

88-5300

Electrode handle only with suction.

Dissectors

DissecteursDissektoren

DissettoriDiseccionadores

Escalpelos

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 67

Instrument Type

Table of contents

SNOWDEN-PENCER® Surgical Balloon DissectorsThis product is sold sterile. Single-use only.

89-8502600cc. 2 small breast balloons/patient.

89-8500

900cc. 2 medium breast balloons/patient.

89-8501

1000cc. 2 large breast balloons/patient.

SNOWDEN-PENCER® Diamond-Tips FOMON RaspsDouble-ended provides two working surfaces.

32-3002

#1 and #2. Tungsten Carbide. Overall length8-1/2in (21.5cm).

32-3004#3 and #4. Tungsten Carbide. Overall length8-1/2in (21.5cm).

32-3006#5 and #6. Tungsten Carbide. Overall length8-1/2in (21.5cm).

32-3008

#7 and #8. Tungsten Carbide. Overall length8-1/2in (21.5cm).

SNOWDEN-PENCER® Diamond-Tips PARKES RaspsLarge handle.

32-3011

#1. Overall length8in (20.5cm).

32-3012


32-3013


32-3014


32-3015


32-3016


32-3017


32-3018


Dissectors/Rasps

Dissecteurs/RuginesDissektoren/RaspelnDissettori/RaschiettiDiseccionadores/RaspadoresEscalpelos/Raladores


Instrument Type

Table of contents

SNOWDEN-PENCER® PEET RaspsFinishing rasp utilizing a diamond particle surface.

88-3200


88-3201


SNOWDEN-PENCER® Diamond-Tips GLABELLA, Large RaspLarge radius tip.

32-3115

Coarse. Overall length8-1/2in (21.5cm).

SNOWDEN-PENCER® Diamond-Tips GLABELLA RaspDown-cutting rasp with small-radius tip.

32-3105

Medium. Overall length8-1/2in (21.5cm).

SNOWDEN-PENCER® Diamond-Tips WEBSTER-GLABELLA RaspBi-directional (push-pull) cut.

32-3120

Coarse. Overall length8-1/2in (21.5cm).

SNOWDEN-PENCER® Diamond-Tips MALTZ RaspFlat short handle.

32-3026

#6. Overall length6-1/2in (16.5cm).

SNOWDEN-PENCER® Diamond-Tips LAMB Rasps

32-3041

#1. Overall length9in (23cm).

32-3043


32-3044


Rasps

RuginesRaspeln

RaschiettiRaspadores

Raladores

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 69

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Tips ASTON Reduction RaspsSpecially designed rasps with blades set at optimal angle.

32-3100

Set includes both rasps.

32-3101

Fine. Overall length8in (20.5cm).

32-3102

Coarse. Overall length8in (20.5cm).

SNOWDEN-PENCER® SHEEN MorselizerUnique twin-post design.

88-9887

SNOWDEN-PENCER® SHEEN CrusherUnique top design allows for variable thickness.

88-7226

Rasps/Bone Crushers/Morselizers

Rugines/Broyeurs d'os/Broyeurs Raspeln/Knochenbrecher/QuetschzangenRaschietti/Frangitori di ossa/SgorbieRaspadores/Trituradoras óseas/Trituradoras Raladores/Trituradores de ossos/Goivas


Instrument Type

Table of contents

SNOWDEN-PENCER® COTTLE Crusher

88-7227

SNOWDEN-PENCER® Diamond-Jaw Pin-Extraction ForcepsHeavy. Double-action.

32-2805

4mm. Tungsten Carbide. Overall length7-3/4in (19.5cm).

SNOWDEN-PENCER® DINGMAN Abraders Wire CutterAvailable in pairs only.

88-2400


SNOWDEN-PENCER® Diamond-Tips Wire/Pin Cutter Side and top double-action.

32-2816

1.7 diameter wire. Overall length7in (18cm).

SNOWDEN-PENCER® Diamond-Tips Wire/Pin CuttersDouble-action.

32-2815

1.7 diameter wire. Overall length 7in (18cm).

32-2820

2.5 diameter wire. Overall length8-3/4in (22cm).

Bone Crushers/Wire Cutters

Broyeurs d'os/Coupe-filsKnochenbrecher/Drahtschneider

Frangitori di ossa/TagliafiliTrituradoras óseas/Cortaalambres

Trituradores de ossos/Cortadores de fios

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 71

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Jaw GUNTER PliersAvailable in two unique jaw surfaces. Model 32-2210 features a Diamond-Jaw Tungsten Carbide insert with large pyramid-shaped teeth. Model 32-2211 features semi-sharp ridges cut longitudinally into a Tungsten Carbide insert.

32-2210


32-2211

Longitudinal jaw. Overall length7in (18cm).

SNOWDEN-PENCER® Diamond-Jaw GORNEY PliersOne jaw features a Diamond-Jaw Tungsten Carbide insert with large pyramid-shaped teeth. The other jaw has semi-sharp ridges cut longitudinally into a Tungsten Carbide insert.

32-2215

Angled. Overall length8in (20.5cm).

32-2217


32-2218

Guard only.

SNOWDEN-PENCER® Diamond-Tips Sherman-Tebbetts™ Osteotomes

88-4059

Overall length8in (20.5cm). Curved left.

88-4060

Overall length8in (20.5cm). Curved right.

SNOWDEN-PENCER® Diamond-Tips Tebbetts™ OsteotomesSerrated.

88-4052

2mm. Overall length6-7/8in (17.5cm).

88-4053


SNOWDEN-PENCER® FOX Dermal Curette

88-3103

4mm diameter. Overall length 5-1/2in (14cm).

Pliers/Curettes/Osteotomes

Pinces/Curettes/OstéotomesZangen/Küretten/OsteotomePinze/Curette/OsteotomiAlicates/Curetas/OsteótomosAlicates/Curetas/Osteótomos


Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Tips RISTOW OsteotomesLonger curved blade in which the curve begins farther down the blade shaft.

88-4017

Right. Overall length8in (20.5cm).

88-4018

Left. Overall length8in (20.5cm).

SNOWDEN-PENCER® Diamond-Tips SILVER OsteotomesWedge-shaped blade with a large guard.

88-4011

Right. Overall length7in (18cm).

88-4012

Left. Overall length7in (18cm).

SNOWDEN-PENCER® Diamond-Tips GUNTER OsteotomesSharp-edged osteotome with small guard.

88-4023


88-4024

Right. Overall length8-1/2in (21.5cm).

88-4025

Left. Overall length8-1/2in (21.5cm).

SNOWDEN-PENCER® Diamond-Tips ANDERSON-NEIVERT OsteotomesSpecial delicate, guarded osteotome.

88-4020


88-4021

Right. Overall length8-1/2in (21.5cm).

88-4022

Left. Overall length8-1/2in (21.5cm).

SNOWDEN-PENCER® Diamond-Tips Tebbetts™ Osteotomes

88-4050

4mm. Overall length7in (18cm).

88-4051


SNOWDEN-PENCER® Diamond-Tips Tebbetts™ DORSUM OsteotomesDouble-guarded blade.

88-4056


88-4057


Osteotomes

OstéotomesOsteotomeOsteotomi

OsteótomosOsteótomos

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 73

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Tips PARKES Gouge OsteotomeDouble-guarded osteotome.

88-4031

6.5mm. Overall length7in (18cm).

SNOWDEN-PENCER® Diamond-Tips RUBIN Type OsteotomesThese osteotomes feature a stabilizer.

88-4013


88-4014


88-4015


SNOWDEN-PENCER® Diamond-Tips CINELLI OsteotomesDouble-guarded.

88-4026


88-4027


88-4028


SNOWDEN-PENCER® Diamond-Tips SHEEHAN OsteotomesSturdy, sharp multi-purpose osteotome.

88-4032


88-4033


88-4034


88-4035


SNOWDEN-PENCER® Diamond-Tips OsteotomesLarge handles with beveled edges. Shafts are tapered.

88-4000


88-4002


SNOWDEN-PENCER® Diamond-Tips PARKES Osteotome

88-4019


Osteotomes

OstéotomesOsteotomeOsteotomiOsteótomosOsteótomos


Instrument Type

Table of contents

SNOWDEN-PENCER® FREER ElevatorsSharp and blunt ends available in 2 sizes, 4.5mm and 6mm.

88-3875

Round handle. 6mm. Sharp/Blunt. Overall length7-1/2in (19cm).

88-3876

Round handle. 4.5mm. Sharp/Blunt. Overall length7-1/2in (19cm).

SNOWDEN-PENCER® JOSEPH ElevatorSlightly curved.

88-3867


SNOWDEN-PENCER® COTTLE Septum ElevatorLong, double-ended septal elevator with graduated shaft features a 4mm x 4mm sharp round end and a 3mm spatula end.

88-3873


SNOWDEN-PENCER® Tebbetts™ Elevator

88-3856


SNOWDEN-PENCER® Suction ElevatorCombination suction-elevator with squared semi-sharp end.

88-3852

Square end. Overall length7in (18cm).

SNOWDEN-PENCER® Elevator

88-3850

Round end. Overall length7-1/2in (19cm).

Elevators

ÉlévateursHeber

ElevatoriElevadoresElevadores

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 75

Instrument Type

Table of contents

SNOWDEN-PENCER® OBWEGESER Periosteal Elevators

88-3890


88-3891


SNOWDEN-PENCER® MITCHELLS Trimmer ElevatorDouble-ended instrument with knife blade and spoon-shaped elevator.

88-3884


SNOWDEN-PENCER® COTTLE Skin Elevator

88-3874

10mm wide. Overall length7-1/2in (19cm).

SNOWDEN-PENCER® WOODSON ElevatorFine, double-ended elevator. Straight and angled ends.

88-3862


SNOWDEN-PENCER® McCOLLOUGH ElevatorVersatile, double-ended instrument.

88-3860


SNOWDEN-PENCER® GUNTER ElevatorDouble-ended elevator featuring large end and very delicate end.

88-3878

4.5mm/6mm. Sharp/Sharp. Overall length7-1/2in (19cm).

Elevators

ÉlévateursHeberElevatoriElevadoresElevadores


Instrument Type

Table of contents

SNOWDEN-PENCER® MacCOLLUM-DINGMAN Spatula

88-3702


SNOWDEN-PENCER® Suction ElevatorQuarter-curved suction elevator has a sharp tip, rounded edges and suction port.

88-5057

Quarter Curved. Overall length9-1/4in (23.5cm).

SNOWDEN-PENCER® ElevatorsFlat tip with rounded edges.

88-5050


88-5051


88-5056


88-5058

Quarter Curved. Overall length9-1/4in (23.5cm).

88-5059

Fully Curved. Overall length9-1/4in (23.5cm).

SNOWDEN-PENCER® BOIES Elevator

88-3871


SNOWDEN-PENCER® AGRIS-DINGMAN SpatulaRounded. Flattened tip. Available in pairs only.

88-3700


Elevators/Spatulas

Élévateurs/SpatulesHeber/Spatel

Elevatori/SpatoleElevadores/EspátulasElevadores/Espátulas

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 77

Instrument Type

Table of contents

SNOWDEN-PENCER® Tebbetts™ SpeculumsSpecula with wide, thin blades and ergonomically designed handle.

88-1441

1-1/2in (38mm). Overall length6in (15cm).

88-1442

1-3/4in (45mm). Overall length6in (15cm).

SNOWDEN-PENCER® VIENNA SpeculumsSpecula with delicate blades. Satin finish.

88-1425

Small 1in. Overall length5-1/2in (14cm).

88-1426

Medium 1-1/4in. Overall length5-1/2in (14cm).

88-1427

Large 1-3/8in. Overall length 5-1/2in (14cm).

SNOWDEN-PENCER® KILLIAN SpeculumsSet screw allows blades to be locked in the desired position. Satin finish.

88-1430

2in (50mm). Overall length5-1/2in (14cm).

88-1431

2-1/2in (63mm). Overall length5-1/2in (14cm).

88-1432


SNOWDEN-PENCER® COTTLE SpeculumsThin blades. Satin finish.

88-1435


Specula

SpéculumSpekulaSpeculumEspéculosEspéculos


Instrument Type

Table of contents

SNOWDEN-PENCER® KLEINERT-KUTZ HooksGeneral-purpose skin hook in shepherd’s-crook design.

88-1515

3mm hook. Overall length6-1/4in (16cm).

88-1516


SNOWDEN-PENCER® JOSEPH Skin Hooks

88-1500

Single hook. Overall length6 -1/4in (16cm).

88-1501

2mm double hook. Overall length6 -1/4in (16cm).

88-1502


88-1503


88-1504


SNOWDEN-PENCER® Light-Weight Straight Skin HooksGeneral-purpose straight hook on a lightweight handle. Large knurling for positive grip.

88-1538

Large. Overall length6in (15cm).

88-1539

Delicate. Overall length6in (15cm).

SNOWDEN-PENCER® CONVERSE Skin HooksShepherd’s-crook design on a lightweight handle. Large knurling for positive grip.

88-1535

Small. Overall length6in (15cm).

SNOWDEN-PENCER® Skin Hook

88-1527


SNOWDEN-PENCER® FRAZIER Skin HookSharp, shepherd’s-crook design.

88-1525


Hooks

CrochetsHakenUncini

GanchosGanchos

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 79

Instrument Type

Table of contents

SNOWDEN-PENCER® MILLARD Thimble HookDesigned to fit over left thumb.

88-1520

Double hook. 18mm wide.

SNOWDEN-PENCER® Tebbetts™ Self-Retaining Skin HooksSelf-retaining.

88-1542

Single hook. Overall length6in (15cm).

88-1544

2mm double hook. Overall length6in (15cm).

88-1545


88-1546


88-1547


88-1549

13mm double hook with ball ends. Overall length6in (15cm).

SNOWDEN-PENCER® GILLIES Skin HookLarge hook on long shaft.

88-1532


SNOWDEN-PENCER® TYRELL Skin HookDelicate, sharp shepherd’s-crook hook design.

88-1518


SNOWDEN-PENCER® GUTHRIE Double Hooks

88-1529

2.5mm hook. Overall length4-3/4in (12cm).

88-1530


Hooks

CrochetsHakenUnciniGanchosGanchos


Instrument Type

Table of contents

SNOWDEN-PENCER® CASTROVIEJO CaliperSelf-retaining, graduated 0mm to 20mm in 1mm increments.

88-7613


SNOWDEN-PENCER® Tebbetts™ Precision CaliperFinely tapered and angulated points.

88-7616


SNOWDEN-PENCER® CannulaSingle port.

88-5105

Single stop-cock for 5mm scope.

SNOWDEN-PENCER® HookFinely tapered, right-angled hook.

88-5054


SNOWDEN-PENCER® BARSKY Double Skin HookDelicate double hook in shepherd’s-crook design.

88-1534


SNOWDEN-PENCER® FRAZIER Suction Tubes

88-7002

8Fr. Overall length7in (18cm).

88-7004


88-7006


Hooks/Cannulas/Suction Tubes/Calipers

Crochets/Canules/Tubes d'aspiration/Pieds à coulisseHaken/Kanülen/Absaugschläuche/MessschieberUncini/Cannule/Tubi di aspirazione/Estesiometri

Ganchos/Cánulas/Tubos de succión/CalibresGanchos/Cânulas/Tubos de sucção/Pinças

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 81

Instrument Type

Table of contents

SNOWDEN-PENCER® Tebbetts™ Alar Stabilizing-Jig CaliperUnique design with delicate projecting pins and millimeter scale allows for stabilizing, as well as providing reference points for precise resections.

88-7228


SNOWDEN-PENCER® THORPE CaliperAngled. Slide-rule-type caliper, graduated 0mm to 80mm in 1mm increments and 0in to 3in in 1/16in increments. Features 3mm, flat tips and thumb-screw for locking caliper.

88-7615


SNOWDEN-PENCER® JAMESON CaliperSlide-rule-type caliper, graduated 0mm to 80mm in 1mm increments and 0in to 3in in 1/16in increments. Features 3mm, flat tips and thumb-screw for locking caliper.

88-7614


SNOWDEN-PENCER® Cartilage GridGraduated in millimeters with bold centimeter markings.

88-7224

Aluminum. Reverse grid.

88-7225

Aluminum.

SNOWDEN-PENCER® FREEMAN MarkersCentrally located aperture.

88-2335

38mm diameter.

88-2336

42mm diameter.

88-2337

45mm diameter.

Calipers/Markers

Pieds à coulisse/MarqueursMessschieber/MarkerEstesiometri/MarcatoriCalibres/MarcadoresPinças/Marcadores


Instrument Type

Table of contents

SNOWDEN-PENCER® McKISSOCK “Keyhole” MarkersLimbs are semi-malleable for fine adjustments and graduated in centimeters.

88-2342

38mm.

88-2343

42mm.

88-2344

45mm.

SNOWDEN-PENCER® MAXWELL MarkerPopular marker with sharp edge which scribes the skin surface for tissue marking.

88-2347

42mm.

SNOWDEN-PENCER® 4-Ring MarkerUnique design allows choice of 4 different ring diameters; 40mm, 44mm, 48mm and 52mm. Must be used with marking ink.

88-2339

SNOWDEN-PENCER® Stainless Steel MalletStainless steel mallet with replaceable nylon heads.

88-7202

7 oz. Head nylon/stainless. Overall length7-1/4in (18.5cm).

Markers/Mallets

Marqueurs/MailletsMarker/SchlägelMarcatori/Magli

Marcadores/MazosMarcadores/Malhetes

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 83

Instrument Type

Table of contents

SNOWDEN-PENCER® KAYE Aluminum Knife HandleRound handle. Light-weight. Cross pin in proximal end to show blade orientation. For use with Bard-Parker blades 10 -15.

88-2009


SNOWDEN-PENCER® BARRON Octagonal Knife Handle KnifeOctagonal handle. Intended for use with Bard-Parker blades 10-15.

88-2008


SNOWDEN-PENCER® Tebbetts™ Precision Knife Handle Knives

88-2012

For Bard-Parker-type blades 10-15. Overall length5-1/4in (13cm).

88-2014

For Beaver-type blades. Overall length5in (12cm).

SNOWDEN-PENCER® FREER KnifeAlso known as the “D” knife.

88-2113


SNOWDEN-PENCER® JOSEPH Button End Knife

88-2111


SNOWDEN-PENCER® BALLENGER Swivel Knives

88-2123

Straight 3mm blade. Overall length 7-1/2in (19cm).

88-2124

Straight 4mm blade. Overall length7-1/2in (19cm).

88-2128

Bayonet 4mm blade. Overall length7-1/2in (19cm).

Knives

CouteauxMesserBisturiCuchillosFacas

84 Instrument pictured Most widely used patterns

Instrument Type

Table of contents

SNOWDEN-PENCER® Knife Handle

88-5055

Quarter Curved. Overall length9in (23cm).

SNOWDEN-PENCER® JOSEPH Saw Knives

88-2150

Left bayonet. Overall length7-1/4in (18.5cm).

88-2151

Right bayonet. Overall length7-1/4in (18.5cm).

SNOWDEN-PENCER® Knife Handles

88-2000


SNOWDEN-PENCER® CORWIN Knife Handle KnifeRound handle.

88-2010

For Bard-Parker-type blades 10-15. Overall length5-3/4in (14.5cm).

SNOWDEN-PENCER® Diamond-Lock 35W Skin StaplerWide.

89-8225

35 staple count. 6 per box. Packaged sterile.

Knives/Staplers

Couteaux/AgrafeusesMesser/Hefter

Bisturi/GraffatriciCuchillos/Grapadoras

Facas/Agrafadores

10

9

8

7

6

5

4

3

2

1

INC

HES

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

CM 85

Instrument Type

Table of contents

SNOWDEN-PENCER® Diamond-Lite 2000 Headlight SystemLightweight design with a 3mm light bundle. Spot size is adjustable from 114mm to 44mm at a distance of 16 inches.

89-8461

Headlight system.

89-8462

Headlight. Soft.

89-8465

Replacement joystick. 3 per box.

Sunoptic XLS300 Xenon LightsourceFeatures a multiple port adapter that will accommodate Storz, Wolf, ACMI and Olympus fiberoptic light cables. Replaceable Xenon bulb is available.

89-8740

XLS300 lightsource.

89-8741

Lamp replacement for the XLS300.

89-8742

Light stand for the XLS300.

89-8710

Replacement bulb for X-300.

89-8731

Replacement lamp for LE300 F/300W.

Headlight/Lightsource/Bulbs

Phare/Source lumineuse/PoiresStirnleuchte/Lichtquelle/GlühbirnenLampada frontale/Sorgente di luce/LampadeFaros/Fuente de luz/BombillasLuz frontal/Ponto de luz/Lâmpadas


Instrument Type

Table of contents

SNOWDEN-PENCER® Fiberoptic Light CablesLightweight design with a 3mm light bundle. Spot size is adjustable from 114mm to 44mm at a distance of 16 inches.

89-8464

Replacement 9ft fiberoptic cable.

SNOWDEN-PENCER® Headlight Accessories

88-9761

7.5in fiberoptic light cable. 5.0mm. Olympus/Acmi.

88-9765

9in fiberoptic light cable. 5.0mm. Acmi/Acmi.

88-9766

9in fiberoptic light cable. 3.5mm. Acmi/Acmi.

88-9768

7.5in fiberoptic light cable. 3.5mm. Storz/Acmi.

88-1048

Wolf/Acmi fiberoptic adapter.

88-1049

Storz/Olympus/Acmi fiberoptic adapter.

88-1060

Female Acmi fitting.

Cables/Adapters/Scopes

Câbles/Adaptateurs/Champs d'applicationKabel/Adapter/EndoskopeCavi/Adattatori/MicroscopiCables/Adaptadores/Miras

Cabos/Adaptadores/Estetoscópios

© 2013 CareFusion Corporation or one of its subsidiaries. All rights reserved. Snowden-Pencer, Diamond Jaw, CareFusion and the CareFusion logo are trademarks or registered trademarks of CareFusion Corporation of one of its subsidiaries. All other trademarks are property of their respective owners. VM2487 (0913/000)

CareFusion Vernon Hills, IL

carefusion.com

ERIEM Surgical, Inc. Lake Forest, IL

micrins.com

Snowden-Pencer plastic and specialty instruments - … · Snowden-Pencer ® plastic and specialty...

Documents

Transcript of Snowden-Pencer plastic and specialty instruments - … · Snowden-Pencer ® plastic and specialty...