Smart Motion Catalog
-
Upload
kolver-usa -
Category
Documents
-
view
219 -
download
0
description
Transcript of Smart Motion Catalog
SMART MOTIONC A T A L O G
2009:1
Which arm do you need?To ensure that the balancing arm you order meets your expectations it is importantto consider the following aspects.
1. Which type?
PARALLEL ARM
! Stationary.
! Vertical working motion, such as threading.
! Can be mounted on table, wall or pillar.
FOLDING ARM
! Stationary.
! Large effective working area in horizontal plane–severaldifferent working operations on same unit at varying distances.
! Can be mounted on table, wall or pillar.
RAIL SUPPORTED ARM
! Rails permit unlimited reach.
! Can be used over several work stations, or several armscan share rails at one work station.
! Can be mounted between pillars fixed to ceiling,wall or floor.
DO YOU NEED ERROR PROOFING?
You can upgrade Folding arms andmost Rail arms with Smart-Control.Smart-Control upgrade adds threeencoders to specific torque arms,at the pivot locations, and a controlsystem. The controller convertsthe data from theencoders to anX, Y & Z locationand controls thescrewdrivers basedon the programyou generated.
WHAT IS SMART-CONTROL?
Smart-Control upgrade adds positional tracking to yourtorque arm. The Smart-Control knows the X, Y & Z locationof your tool and synchronizes the location with the toolcontrol system.
Smart-Control Features:
! Program 5 jobs with 40 screw locations each.
! Add a bit/socket tray to confirm the correct applicatoris used.
! Add Smart-Bins to confirm the correct screw is used.
Look for the Smart upgrade symbol to know ifthe arm you are considering is suitable for thisoption.
2. Which tool holder? 3. What load capacity?
The design of the tool and type of operation determinethe choice of tool holder. Tool holders are availablethat are fixed, or can tilt and rotate to permit horizontalor vertical operations..
Choose the correct size of tool holder by measuring thediameter of the selection of the tool or machine thatwill be held in the tool holder. If necessary, the toolholder can be combined with one of our speciallymade adapter sleeves.
NOTE! When the shaft of a power screwdriver is parallelwith the rotating axis of the tool holder, the torque willnot be eliminated.
To decide the correct load capacity for a balancing
arm you need to take the following into account:
Weight of cables, hoses, etc. to tool/machine
Weight of tool/machine
Weight of any extension tube
+ Weight of tool holder
= Total weight to use when choosing
load capacity
Although the greatest care has been taken to ensure the accuracyof information in this catalog, we accept no liability for any errors. Wereserve the right to make changes without prior notice.
I L L U S T R A T I O N S The illustrations in this catalog represent theproducts described, but the supplied goods may differ in certain respectsfrom those illustrated.
S P E C I F I C A T I O N S To avoid holding back improvement in design,materials and manufacturing methods, we reserve the right to revisedesigns and dimensions in relation to the information given in thiscatalog.
Customers are reminded that when buying products from Kolver USAfor use in professional or other applications, additional up-to-dateinformation and advice is available that is outside the scope of thiscatalog concerning the suitability of each product for use with variouscombinations of Kolver USA’s extensive product range. All relevantinformation must be passed on to the individuals who are responsiblefor using the product.
www.ko lverusa . com / SMART MOTION CATALOG 3
Article Number Load Capacity Torque Max reach Min reach Height
PA1-0400-0102 2.2–4.4 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in
PA1-0400-0203 4.4–6.6 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in
PA1-0400-0304 6.6–8.8 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in
PA1-0400-0405 8.8–11.0 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in
PA1-0400-0506 11.0–13.2 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in
PA1-0400-0608 13.2–17.6 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in
PA1-0400-0810 17.6–22.0 lbs 619.5 in/lbs 36.2 in 24.8 in 21.7 in
PA1-0500-0102 2.2–4.4 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in
PA1-0500-0203 4.4–6.6 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in
PA1-0500-0305 6.6–11.0 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in
PA1-0500-0506 11.0–13.2 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in
PA1-0500-0608 13.2 17.6 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in
PA1-0500-0810 17.6–22.0 lbs 619.5 in/lbs 43.3 in 28.7 in 25.6 in
Parallel arm (PA1)PA1 is the most powerful parallel arm and is capable of supporting a weight of up to 22.0 lbs and a torqueof up to 619.5 in/lbs. It is intended for vertical operations and is especially suitable for fitting screws and forlarge threading operations.
The weight of the tool is supported by gas springs. The longer pillar is recommended as installed on the floor when working in a seated position.
SMART MOTION CATALOG / www.ko lverusa . com4
Accessories Parallel arm (PA1)
* See price list for a selection of Adapter Sleeves
TABLE STAND! TST-0125
Torque ! 442.5 in/lbs
WALL BRACKET! WBR-P1-1
Torque ! 442.5 in/lbs
PILLAR! BST-080X080X0800 h = 31.5 in! BST-080X080X1300 h = 51.2 in
ADJUSTABLE VERTICAL HOLDER! ATH-4050-1 Ø = 1.6–1.96 in! ATH-5060-1 Ø = 1.96–2.3 in
Weight .88 lbs Torque ! 442.5 in/lbs
FIXED VERTICAL HOLDER *
! VTH-PF-057-1
Weight 1.5 lbs Torque ! 619.5 in/lbs
FIXED VERTICAL HOLDER
swiveling tool *
! VTH-PS-057-1
Weight 3.3 lbs Torque ! 619.5 in/lbs
WALL BRACKET! WBR-P1-2
Torque ! 619.5 in/lbs
www.ko lverusa . com / SMART MOTION CATALOG 5
Article Number Load Capacity Torque Max reach Min reach Height
PA2-0300-0002 0–4.4 lbs 177.0 in/lbs 25.2 in 17.3 in 13.8 in
PA2-0300-02025 4.4–5.5 lbs 177.0 in/lbs 25.2 in 17.3 in 13.8 in
PA2-0400-0002 0–4.4 lbs 177.0 in/lbs 30.7 in 20.5 in 16.9 in
PA2-0400-02025 4.4–5.5 lbs 177.0 in/lbs 30.7 in 20.5 in 16.9 in
Parallel arm (PA2)The PA2 parallel arm is intended for vertical operations and is used primarily with threading machinesand power screwdrivers.
The longer pillar is recommended as installed on the floor when working in a seated position.
SMART MOTION CATALOG / www.ko lverusa . com6
www.ko lverusa . com / SMART MOTION CATALOG 7
Accessories Parallel arm (PA2)
* See price list for a selection of Adapter Sleeves
ADJUSTABLE VERTICAL HOLDER! ATH-2540-2 Ø = 0.98–1.6 in ! ATH-4050-2 Ø = 1.6–1.96 in
Weight .44 lbs
FIXED VERTICAL HOLDER! VTH-0036-2 Ø = 1.4 in ! VTH-0038-2 Ø = 1.5 in! VTH-0046-2 Ø = 1.8 in ! VTH-0056-2 Ø = 2.2 in
Weight .44 lbs
VERTICAL HOLDER, adjustable in two axis *
! STH-0036-2 Ø = 1.4 in ! STH-0038-2 Ø = 1.5 in! STH-0046-2 Ø = 1.8 in ! STH-0056-2 Ø = 2.2 in
Weight .44 lbs
TABLE STAND! TST-0100 h = 11.8 in! TST-0148 h = 18.5 in
TABLE CLAMP! TCL-2282
WALL BRACKET! WBR-P2
PILLAR! BST-080X040X0800 h = 31.5 in! BST-080X040X1300 h = 51.2 in
Article Number Load Capacity Torque Max reach Min reach
PS1-1000-0102 2.2–4.4 lbs 619.5 in/lbs 38.8 in 11.6 in
PS1-1000-0204 4.4–8.8 lbs 619.5 in/lbs 38.8 in 11.6 in
PS1-1000-0405 8.8–11.0 lbs 619.5 in/lbs 38.8 in 11.6 in
PS1-1000-0506 11.0–13.2 lbs 619.5 in/lbs 38.8 in 11.6 in
PS1-1000-0608 13.2–17.6 lbs 619.5 in/lbs 38.8 in 11.6 in
PS1-1000-0810 17.6–22.0 lbs 619.5 in/lbs 38.8 in 11.6 in
PS1-1200-0102 2.2–4.4 lbs 619.5 in/lbs 45.7 in 15.7 in
PS1-1200-0204 4.4–8.8 lbs 619.5 in/lbs 45.7 in 15.7 in
PS1-1200-0405 8.8–11.0 lbs 619.5 in/lbs 45.7 in 15.7 in
PS1-1200-0506 11.0–13.2 lbs 619.5 in/lbs 45.7 in 15.7 in
PS1-1200-0608 13.2–17.6 lbs 619.5 in/lbs 45.7 in 15.7 in
PS1-1200-0810 17.6–22.0 lbs 619.5 in/lbs 45.7 in 15.7 in
Folding arm (PS1)PS1 is the most powerful folding arm. It is capable of supporting a weight of up to 22.0 lbs and a torqueof up to 619.5 in/lbs.
Folding arms have a large effective working area and are suitable for both vertical and horizontal operations. The weight of thetool is supported by gas springs. The longer pillar is recommended as installed on the floor when working in a seated position.
SMART MOTION CATALOG / www.ko lverusa . com8
Accessories Folding arm (PS1)
* See price list for a selection of Adapter Sleeves
ADJUSTABLE VERTICAL HOLDER! ATH-4050-1 Ø = 1.6–1.96 in ! ATH-5060-1 Ø = 1.96–2.4 in
Weight .88 lbs Torque ! 442.5 in/lbs
FIXED VERTICAL HOLDER! VTH-PF-057-1
Weight 1.54 lbs Torque ! 619.5 in/lbs
ADJUSTABLE HORIZONTAL HOLDER! HTH-4050-1 Ø = 1.6–1.96 in ! HTH-5060-1 Ø = 1.96–2.4 in
Weight 2.65 lbs Torque ! 442.5 in/lbs
FIXED VERTICAL HOLDER, swiveling tool *
! VTH-PS-057-1
Weight 3.75 lbs Torque ! 619.5 in/lbs
ROTARY HORIZONTAL HOLDER, fixed tool *
! HTH-PF-057-1
Weight 3.53 lbs Torque ! 619.5 in/lbs
ROTARY HORIZONTAL HOLDER, swiveling tool *
! HTH-PS-057-1
Weight 5.3 lbs Torque ! 619.5 in/lbs
TABLE STAND! TST-0125
Torque ! 442.5 in/lbs
WALL BRACKET! WBR-P1-1
Torque ! 442.5 in/lbs
PILLAR! BST-080X080X0800 h = 31.5 in! BST-080X080X1300 h = 51.2 in
WALL BRACKET! WBR-P1-2
Torque ! 619.5 in/lbs
www.ko lverusa . com / SMART MOTION CATALOG 9
Article Number Load Capacity Torque Max reach Min reach
PS2-0750-0001 0–2.2 lbs 177.0 in/lbs 27.9 in 4.3 in
PS2-0750-01025 2.2–5.5 lbs 177.0 in/lbs 27.9 in 4.3 in
PS2-0900-0001 0–2.2 lbs 177.0 in/lbs 33.1 in 7.9 in
PS2-0900-01025 2.2–5.5 lbs 177.0 in/lbs 33.1 in 7.9 in
Folding arm (PS2)The PS2 folding arm has a large effective working area and a wide selection of tool holders for bothvertical and horizontal operations.
Common tools and machines that are used with PS2 include pop rivet guns, portioning tools, power screwdrivers, adhesiveguns and nail guns. The longer pillar is recommended as installed on the floor when working in a seated position.
SMART MOTION CATALOG / www.ko lverusa . com10
Accessories Folding arm (PS2)
* See price list for a selection of Adapter Sleeves
ADJUSTABLE VERTICAL HOLDER! ATH-2540-2 Ø = 0.98–1.96 in ! ATH-5060-1 Ø = 1.6–1.96 in
Weight .44 lbs
FIXED VERTICAL HOLDER! VTH-0036-2 Ø = 1.4 in ! VTH-0038-2 Ø = 1.5 in! VTH-0046-2 Ø = 1.8 in ! VTH-0056-2 Ø = 2.2 in
Weight 1.54 lbs Torque ! 619.5 in/lbs
HORIZONTAL HOLDER, rotary and adjustable *
! CST-0036-2 Ø = 1.4 in ! CST-0038-2 Ø = 1.5 in! CST-0046-2 Ø = 1.8 in ! CST-0056-2 Ø = 2.2 in
Weight .88 lbs
VERTICAL HOLDER, adjustable in two axis *
! STH-0036-2 Ø = 1.4 in ! STH-0038-2 Ø = 1.5 in! STH-0046-2 Ø = 1.8 in ! STH-0056-2 Ø = 2.2 in
Weight .66 lbs
ROTARY HORIZONTAL HOLDER *
! HTH-0036-2 Ø = 1.4 in ! HTH-0038-2 Ø = 1.5 in ! HTH-0046-2 Ø = 1.8 in ! HTH-0056-2 Ø = 2.2 in
Weight .88 lbs
TABLE STAND! TST-0100 h = 11.8 in! TST-0148 h = 18.5 in
TABLE CLAMP! TCL-2282
PILLAR! BST-080X040X0800 h = 31.5 in! BST-080X040X1300 h = 51.2 in
WALL BRACKET! WBR-P2
www.ko lverusa . com / SMART MOTION CATALOG 11
Article Number Load Capacity Torque Max reach Min reach
PS3-0750-00005 0–1.1 lbs 30.98 in/lbs 26.4 in 5.3 in
PS3-0750-00501 1.1–2.2 lbs 30.98 in/lbs 26.4 in 5.3 in
PS3-0900-00005 0–1.1 lbs 30.98 in/lbs 31.7 in 9.1 in
PS3-0900-00501 1.1–2.2 lbs 30.98 in/lbs 31.7 in 9.1 in
Folding arm (PS3)The PS3 folding arm is used exclusively for fine mechanical work. Machines and tools that are often usedwith this folding arm include soldering irons and small power screwdrivers.
Tool mountings are available for both vertical and horizontal operations. A wall bracket, height stop and extension tube arestandard equipment with this arm. The longer pillar is recommended as installed on the floor when working in a seated position.
SMART MOTION CATALOG / www.ko lverusa . com12
Accessories Folding arm (PS3)
* See price list for a selection of Adapter Sleeves
EXPANSION TUBE! TEX-P3
Weight .31 lbs
ADJUSTABLE VERTICAL HOLDER! ATH-2540-3 Ø = 0.98–1.6 in ! ATH-4050-3 Ø = 1.6–1.96 in
Weight .44 lbs
VERTICAL HOLDER, adjustable in two axis *
! STH-0036-3 Ø = 1.4 in ! STH-0038-3 Ø = 1.5 in! STH-0046-3 Ø = 1.8 in ! STH-0056-3 Ø = 2.2 in
Weight .66 lbs
FIXED VERTICAL HOLDER ! VTH-0036-3 Ø = 1.4 in ! VTH-0038-3 Ø = 1.5 in! VTH-0046-3 Ø = 1.8 in ! VTH-0056-3 Ø = 2.2 in
Weight .33 lbs
HORIZONTAL HOLDER, rotary and adjustable *
! CST-0036-3 Ø = 1.4 in ! CST-0038-3 Ø = 1.5 in! CST-0046-3 Ø = 1.8 in ! CST-0056-3 Ø = 2.2 in
Weight .88 lbs
ROTARY HORIZONTAL HOLDER *
! HTH-0036-3 Ø = 1.4 in ! HTH-0038-3 Ø = 1.5 in! HTH-0046-3 Ø = 1.8 in ! HTH-0056-3 Ø = 2.2 in
Weight .33 lbs
HEIGHT STOP! TAR-P3
Included.
TABLE CLAMP! TCL-2282
PILLAR! BST-040X040X0800 h = 31.5 in! BST-040X040X1300 h = 51.2 in
WALL BRACKET! WBR-P3
Included.
www.ko lverusa . com / SMART MOTION CATALOG 13
Article Number Load Capacity Torque Reach
PR1-0500-0102 2.2–4.4 lbs 442.5 in/lbs +/-19.7 in
PR1-0500-0204 4.4–8.8 lbs 442.5 in/lbs +/-19.7 in
PR1-0500-0405 8.8–11.0 lbs 442.5 in/lbs +/-19.7 in
Rail supported arm (PR1)The PR1 rail supported arm is the most powerfularm of this type and has a very versatile design.
The rails for the PR1 arm and smaller PR2 arm are the same.This has the advantage that if necessary both sizes of arm canbe mounted on the same rail unit. The extension tube can bemounted at the required height. The weight of the tool issupported by gas springs.
SMART MOTION CATALOG / www.ko lverusa . com14
Accessories Rail supported arm (PR1)
* See price list for a selection of Adapter Sleeves
PILLAR! BST-080X080X1300
OFFSET BEAM! OSB-080X040X0500
ALUMINUM BEAM! SBE-080X040
RAIL! BRL-3412
END STOP! EST-3434
END COVER! ECO-8040
CABLE TROLLEY! TRO-8040
Rec 1 piece/m
ARRESTING KIT 4 PCS! AKI-MC6S06X040-1
Rec 1 set/m
EXTENSION TUBE! TEX-P1
WEIGHT: 1.1 lbs
ADJUSTABLE VERTICAL HOLDER! ATH-4050-1 Ø = 15.7–19.7 in! ATH-5060-1 Ø = 19.7–23.6 in
Weight: .88 lbs
FIXED VERTICAL HOLDER! VTH-PF-057-1
Weight: 1.5 lbs
FIXED VERTICAL HOLDER, swiveling tool *
! VTH-PS-057-1
Weight: 3.3 lbs
www.ko lverusa . com / SMART MOTION CATALOG 15
Article Number Load Capacity Torque Reach
PR2-0550-00025 0–5.5 lbs 177.0 in/lbs +/- 18.1 in
Rail supported arm (PR2)The PR2 rail supported arm has a very flexible designand many practical accessories. We recommend thatthe rail supported arm is fitted with both a side stopand a height stop for maximum control andconvenience.
Because the same rails can be used for both the PR1 and PR2arms it is possible to mount both sizes of arm on the same railunit if needed.
The extension tube can be mounted at the required height. Ifan adjustable working height is required, we recommend theadjustable extension tube. It can be adjusted between 15.75and 27.6 in.
SMART MOTION CATALOG / www.ko lverusa . com16
Accessories Rail supported arm (PR2)
* See price list for a selection of Adapter Sleeves
VERTICAL HOLDER,
adjustable in two axis *
! STH-0036-2 Ø = 1.4 in! STH-0038-2 Ø = 1.5 in! STH-0046-2 Ø = 1.8 in! STH-0056-2 Ø = 2.2 in
Weight .66 lbs
FIXED VERTICAL HOLDER! VTH-0036-2 Ø = 1.4 in! VTH-0038-2 Ø = 1.5 in! VTH-0046-2 Ø = 1.8 in! VTH-0056-2 Ø = 2.2 in
Weight .44 lbs
ADJUSTABLE
VERTICAL HOLDER! ATH-2540-2 Ø = 0.98–1.6 in! ATH-4050-2 Ø = 1.6–1.96 in
Weight .44 lbs
RAIL! BRL-3412
OFFSET BEAM! OSB-080X040X0500
PILLAR! BST-080X040X1300
ALUMINUM BEAM! SBE-080X040
END COVER! ECO-8040
END STOP! EST-3434
ARRESTING KIT 4 PCS! AKI-MC6S06X040-1
Rec 1 set/m
CABLE TROLLEY! TRO-8040
Rec 1 piece/m
HEIGHT STOP! TAR-P2
SIDE STOP! SAR-P2
EXTENSION TUBE! TEX-P2
Weight: 1.1 lbs
EXTENSION TUBE, adjustable! THA-P2
Weight: 1.3 lbs
www.ko lverusa . com / SMART MOTION CATALOG 17
Article Number Load Capacity Torque Reach
PR3-0500-0001 0–2.2 lbs 30.98 in/lbs +/- 17.3 in
Rail supported arm (PR3)The PR3 rail supported arm has a very flexible designand is used exclusively for fine mechanical work.
There are tool holders for both vertical and horizontal operations. The rails can be ordered in the required length and can bemounted on the ceiling, wall or floor. A height stop and extensiontube are standard equipment with the arm, giving excellentaccessibility, convenience and control.
SMART MOTION CATALOG / www.ko lverusa . com18
Accessories Rail supported arm (PR3)
* See price list for a selection of Adapter Sleeves
ROTARY HORIZONTAL HOLDER *
! HTH-0036-3 Ø = 1.4 in! HTH-0038-3 Ø = 1.5 in! HTH-0046-3 Ø = 1.8 in! HTH-0056-3 Ø = 2.2 in
Weight .33 lbs
VERTICAL HOLDER,
adjustable in two axis *
! STH-0036-3 Ø = 1.4 in! STH-0038-3 Ø = 1.5 in! STH-0046-3 Ø = 1.8 in! STH-0056-3 Ø = 2.2 in
Weight .66 lbs
ADJUSTABLE
VERTICAL HOLDER! ATH-2540-3 Ø = 0.98–1.6 in! ATH-4050-3 Ø = 1.6–1.96 in
Weight .44 lbs
FIXED VERTICAL HOLDER! VTH-0036-3 Ø = 1.4 in! VTH-0038-3 Ø = 1.5 in! VTH-0046-3 Ø = 1.8 in! VTH-0056-3 Ø = 2.2 in
Weight .33 lbs
HORIZONTAL HOLDER,
rotary and adjustable *
! CST-0036-3 Ø = 1.4 in! CST-0038-3 Ø = 1.5 in! CST-0046-3 Ø = 1.8 in! CST-0056-3 Ø = 2.2 in
Weight .88 lbs
END STOP! EST-2020
OFFSET BEAM! OSB-080X040X0500
PILLAR! BST-080X040X1300
RAIL! BRL-8040
EXTENSION TUBE! TEX-P3
Weight: .31 lbs
Included.
END COVER! ECO-8040
CABLE TROLLEY! TRO-PR3
Rec 1 piece/m
HEIGHT STOP! TAR-P3
Included.
www.ko lverusa . com / SMART MOTION CATALOG 19
SMART MOTION CATALOG / www.ko lverusa . com20
Article Number Load Capacity Torque Max reach
PS-100 33.1 lbs 885.0 in/lbs 78.7 in
PS-300 66.1 lbs 2655.0 in/lbs 78.7 in
Pillar mounted folding armsmodel POS-100 & POS-300Smart Motion ergonomic folding arms assist operators who work with heavier assembly work. The result is a safer and more efficient work station design.
The POS-100 and POS-300 are complete folding arm packages that can be used for many different types of mounting, includingrail-mounting applications.
Folding arms are often used with screwdrivers or nutrunners, but can also be used with other types of tools and applications,such as drilling equipment, tapping application and different types of material handling applications.
Our range of tool attachments makes all variations of screwdriver operation possible; horizontal, vertical or rotational.
Fast installation, minimal maintenance and long life are characteristics of the POS units.
Performance
Smart Motion
www.ko lverusa . com / SMART MOTION CATALOG 21
How to choose a tool holder/when you need a brakeThere are nine different tool configurations available to cover the most common operations with aninline or right angled tool.
Follow the guide below to identify the specific tool holder needed and brake required:
! Do you have an inline or right angled tool?
! Is the tool performing horizontal and/or vertical rotations?
! Is the tool fixed or swivel mounted (i.e. rotate about its axis)?
! What is the diameter of the attachment point on the tool? For optimal fit, provide the tool make and model numberwhen ordering.
Inline tool holders
0 - 885.0 in/lbs! S-PTH-F75 Ø = < 2.95 in
Weight 12.1 lbs
885.0 - 2655.0 in/lbs! D-PTH-F75 Ø = < 2.95 in
Weight 14.3 lbs
P/N for tool holder required
0 - 885.0 in/lbs! S-PTV-F75-L100 Ø = < 2.95 in
Weight 19.8 lbs
885.0 - 2655.0 in/lbs! D-PTV-F75-L300 Ø = < 2.95 in
Weight 33 lbs
P/N for tool holder required
0 - 885.0 in/lbs! S-PTR-F75-L100 Ø = < 2.95 in
Weight 23.1 lbs
885.0 - 2655.0 in/lbs! D-PTR-F75-L300 Ø = < 2.95 in
Weight 34.6 lbs
P/N for tool holder required
No Brake BrakeRequired
No Brake
Right angled tool holders
0 - 885.0 in/lbs! S-PTV-F75 Ø = < 2.95 in
Weight 14.3 lbs
885.0 - 2655.0 in/lbs! D-PTV-F75 Ø = < 2.95 in
Weight 16.1 lbs
P/N for tool holder required
0 - 885.0 in/lbs! S-PTV-S75 Ø = < 2.95 in
Weight 16.1 lbs
885.0 - 2655.0 in/lbs! D-PTV-S75 Ø = < 2.95 in
Weight 19.8 lbs
P/N for tool holder required
0 - 885.0 in/lbs! S-PTH-F75-L100 Ø = < 2.95 in
Weight 17.6 lbs
885.0 - 2655.0 in/lbs! D-PTH-F75-L300 Ø = < 2.95 in
Weight 31 lbs
P/N for tool holder required
0 - 885.0 in/lbs! S-PTH-S75-L100 Ø = < 2.95 in
Weight 19.4 lbs
885.0 - 2655.0 in/lbs! D-PTH-S75-L300 Ø = < 2.95 in
Weight 34.6 lbs
P/N for tool holder required
0 - 885.0 in/lbs! S-PTR-F75-2L100 Ø = < 2.95 in
Weight 28.7 lbs
885.0 - 2655.0 in/lbs! D-PTR-F75-2L300 Ø = < 2.95 in
Weight 51.8 lbs
P/N for tool holder required
0 - 885.0 in/lbs! S-PTR-S75-2L100 Ø = < 2.95 in
Weight 30.2 lbs
885.0 - 2655.0 in/lbs! D-PTR-S75-2L300 Ø = < 2.95 in
Weight 53.4 lbs
P/N for tool holder required
SMART MOTION CATALOG / www.ko lverusa . com22
No Brake No Brake BrakeRequired
BrakeRequired
BrakeRequired
BrakeRequired
Options
Additional Smart Motion armsSmart Motion offers a large range of arms to meet the many types of assembly production needs. Beloware examples of Parallel Arms for Vertical Applications, Rail Arms mounted to Overhead Rails, and TorqueTubes mounted to Overhead Rails.
Application examples
As an option POS-100 & POS-300 can be equipped with an operator assist feature to activate the machine. This gives theoperator an additional force upwards or downwards when the machine is used, which gives the operator relief in theirdaily assembly work. Requires an electrical control signal 24 VDC.
Our standard arms are designed to cover a large range of our clients’ needs. We also offer the service of custom designs forspecial applications.
KOLVER USA1 Park DriveUnit 9Westford, Massachusetts, 01886USAphone: 978 692 5166fax: 978 692 3042www.kolverusa.com
CA
T1 1
009
4M