Smart Grid & Energy Management Products

ASIRIX INFOTECH PVT. LTD.

www.asirixinfotech.com Quest for Innovation

Quad band GSM/GPRS module

ARM Processor

Serial Communication Ports

9-24V DC Input

Highly Reliable

Low Power Consumption

Low Cost

GSM/GPRS TERMINAL GENERAL FEATURES:

Quest for Innovation


• Customizable Firmware

• Supports TCP/UDP/HTTP and FTP Protocols for Data Communication

• Supports MQTT protocol for two way communication between sever and

the device.

• RTC and Timers for Scheduled Data Transmission to Servers

• Facility to store data in case of communication failure and forward when

communication is resumed.

• Supports protocols like Modbus/DLMS etc. on RS485/RS232 ports, for

data acquisition from external devices

• Storing mobile numbers in different groups for sending alert messages and

for authorizations.

www.asirixinfotech.com


• Configuration of parameters remotely from Server or via SMS or server

commands.

• Configuration via serial port using configuration tool.

• Low power mode for power savings, and automatic wakeup on GSM

communications, Serial event or IO Change

• Watch Dog Timer

• Over the Air updating of firmware




• RS232 and RS485 Ports

• 8 Digital Inputs

• 2 Digital Outputs

• 9-24V DC Input

• ABS Plastic Enclosure

MACTEL GSM/GPRS TERMINAL:



Salient Features

– Real time monitoring of digital Inputs

– Operate digital outputs in automatic or manual modes

– Server as well as SMS alerts for DI/DO changes

– Operate digital outputs via SMS from authorized numbers or server

commands.

– User Configurable automation logic for digital outputs based on time,

week day, status of digital outputs

– Remote operation of digital outputs via SMS /Server commands with

authorization and feedback




Salient Features

– Supports standard protocols like Modbus, DLMS and also proprietary

protocols on RS232/RS485 ports.

– Monitors serial ports continuously and captures data for processing

and communication to servers on desired protocol.

– Periodical or event based communication to servers.

– Go on low power mode and wake up on serial data.




Applications

– Remote Monitoring

– Automation and Remote Control

– Remote Data Acquisition

– Automatic Meter Reading

MACTEL GSM/GPRS TERMINAL



MAC-604 GSM/GPRS TERMINAL

Hardware Features

– One RS232 and one TTL Port (debug)

– RTC with battery backup

– Ultra Low Power Consumption

– Compact Aluminum Enclosure




Firmware Features

– Supports standard/proprietary protocols on RS232 port.

– RTC with battery backup

– Very low power consumption on idle/sleep mode and automatic

wakeup on incoming serial data.

– Provision to completely power off the GSM module and wake up

on configured time intervals. Ideal for long life battery based

operations.

– Easily make your devices communicate with the external work on

SMS,TCP.UDP,HTTP or FTP protocols

– Supports MQTT protocol for server communication




• Dual SIM Card

• 12 Analog Inputs (16 /24 bit Resolution) (Voltage or 4-20mA

Configurable)

• 12 Digital Inputs


• 2 Pulse Inputs

• RS232 and RS485 Ports

• 9-24V DC Input


• Enhanced Protection




Salient Features

– 12 numbers of high precision analog input ports, configurable for 0-5 volts, 0-10 volts or 4-20mA

– Real time monitoring of Digital Inputs

– Operate Digital Outputs in automatic or manual modes

– Server as well as SMS alerts for DI/DO changes

– Operate Digital Outputs via SMS from authorized numbers or server commands.

– User configurable automation logic for Digital outputs based on Time, Week day, Analog input status, status of digital inputs/outputs etc.

– Remote Operation of Digital Outputs via SMS /Server commands with authorization and feedback

– Pulse Counting for data acquisition form devices like Flow meter



DATA LOGGERS GENERAL FEATURES

• ARM Cortex M4 Processor

• In built Quad band GSM/GPRS module

• RS232 and RS485 Communication Ports

• Digital Inputs

• Digital Outputs

• Flash and SD Card

• Highly reliable



MAC-1100 GSM/GPRS DATA LOGGER

• ARM Cortex M4 MCU with 1024KB Flash, 256 KB RAM

• Quad Band GSM/GPRS Module

• 2MB Serial flash(Upgradable)

• SD Card interface for data storage

• RS232 Port x 2

• RS485 Port x 1

• Ethernet port

• 8 Digital Outputs with 230V AC,10amps relay

• 8 Digital inputs

• 8 Analog inputs (0-5V or 4-20mA Selectable)

• 9-24V DC Input




MAC-1100 DATA LOGGER

Firmware Features

– Customizable firmware

– Server communication through GPRS and/or Ethernet LAN network

– Supports TCP/UDP/HTTP and FTP protocols for data

communication

– Periodic or event based communication to servers

– Data storage on SD card or Serial Flash

– Data capture from external devices on standard protocols like

MODBUS,DLMS or proprietary protocols

– Configuration via Serial port and/or from Server and/or SMS

commands.



MAC-1100 DATA LOGGER

Firmware Features

– User Configurable Automation logic for Digital Outputs.

– Operation of Digital Outputs from Server and/or SMS commands on

manual mode.

– Server or SMS alerts on status change of Digital inputs or Digital

outputs

– Configure any digital input as high speed pulse counters

– Read Analog Inputs and generate Server/SMS alarms based on

Max/Min thresholds



MAC-900 DATA LOGGER

• ARM Cortex M4 MCU

• Quad Band GSM/GPRS Module

• 2MB Serial flash(Upgradable)

• SD Card interface for data storage

• USB OTG for data transfer

• RS232 Port x 2nos

• RS485 Port x 1no

• 1 CAN Port

• ADD On Board for HART Interface

• 1 SDI Port


• 6 Digital inputs

• 8 Analog inputs (0-5V or 4-20mA)

• 9-24V DC Input




MAC-900 DATA LOGGER

Firmware Features

– Customizable firmware

– Server communication through GPRS

– Supports TCP/UDP/HTTP and FTP protocols for data

communication

– Periodic or event based communication to servers

– Use normal USB dongle for copying data

– Data storage on SD card or Serial Flash

– Data capture from external devices on standard protocols like

MODBUS, DLMS, SDI, HART or proprietary protocols

– Configuration via Serial port and/or from Server and/or SMS

commands.



MAC-900 DATA LOGGER

Firmware Features

– User Configurable Automation logic for Digital Outputs.

– Operation of Digital Outputs from Server and/or SMS commands on

manual mode.

– Server or SMS alerts on status change of Digital inputs or Digital

outputs

– Configure any digital input as high speed pulse counters

– Read Analog Inputs and generate Server/SMS alarms based on

Max/Min thresholds.


Thank You…

Smart Grid & Energy Management Products

Documents

Transcript of Smart Grid & Energy Management Products