Smart Building Solution - Chipkin Automation Systems · 2017. 2. 22. · Smart Buildings –...

SMART BUILDING SOLUTIONS

Controlled

InstantEnergy $avings

BAS

Feedback Feedback Feedback Feedback SolutionsSolutionsSolutionsSolutions

fromfromfromfrom

&

GatewayPeople Counter

Energy $avings

Our Value

Designing Solutionsthat deliver value Strong partnership

with industry leaders


Help controloperational costs

Team Work

Differentiation

Why Count in Buildings:

� Understand traffic flow - movement of people IN and OUT of the building – floor - room

� Understand occupancy levels in a room – floor - building


� Control Ventilation System based on actual occupancy

� React faster to changes in your IAQ (Internal Air Quality)

� Interface with any 'Building Automation System' (BAS)

Introducing the ‘Counter Network Gateway’


The CNG-1000/CAS Gateway is a Joint-Venture development between Chipkin

Automation Systems, Vancouver, a specialist engineering firm providing services

to 'Building Automation' users in North America, and Feedback Solutions,

Toronto, a People Counting company offering solutions built round 'people-counting'

technology to deliver value to customers.

With Energy Management being a concern for all property management companies,

Chipkin Automation & Feedback Solutions have jointly developed the 'Counter

Network Gateway' that enables communication between two diverse technology

platform and facilitates instant savings on energy consumption.

How the Gateway Works


Using accurate IP based 'People Counting Sensors', as the source for

capturing the flow of people into a building/floor/room the CNG-1000

Gateway converts 'Occupancy Data' and makes it available in real-time

on BACnet IP or Modbus TCP so that it can be discovered by any BAS

system. system.

BacNetGateway

IN – OUT

Data on

IP

OccupancyData on

BacNet

SensorBAS System

Data Available Every 5 minutes

Discover• Device Instance• Object• Properties

Adjusting your HVAC/ Lighting on any level you desire


Building

Floor 1

Floor 2

Entrance 1 (1 Sensor; 1 IP address)


Entrance 1 (1 Sensor; 1 IP address)Floor 2

Floor 3


Entrance 1 (1 Sensor; 1 IP address)Room 1

Floor 4Room 1

Room 2



Traditional Buildings

• Ventilation System running at full capacity irrespective of the number of people in each floor or building


• May or may not use a Building Automation System

• Waste of energy • Continuous use of ventilation

• Excessive heating or cooling of outside air• Huge energy bills

Smart Buildings - Controlling HVAC using a ‘CO2 Sensor’

• Ventilation Requirementadjusted based on CO2 levels Inside the building- when compared to CO2 levels Outside the building

CO2


• Based on assumed occupancy (number of people) on each floor / building

CO2Sensor

Cons –• Time lag to register change results in triggering

controls based on assumed occupancy and not actual occupancy

• Does not reflect occupancy in real-time hence not very accurate

Pros –• Save on Energy • Controlled use of ventilation • Lower energy bills• Lower cost of deployment

Smart Buildings – Controlling HVAC using a ‘People Counter’

• Ventilation adjusted based on actual occupancy (number of people) on each floor / building / room in real-time.

• Can calculate actual cfm based

PeopleCounter


• Can calculate actual cfm based on actual number of people inside

Cons –• Higher cost of deployment• Requires configuration of people counter on site

Pros –• Save instantly on Energy • Faster reaction to change in air• Better controlled use of ventilation • Lower energy bills• Short ROI• Extremely accurate

BACnetGateway

Where it can be used:

� Office buildings – floors – offices – meeting rooms

� University buildings – floors / classrooms/ lecture halls

� Libraries

Auditorium


� Auditorium

� Night club / Theatres

� Class rooms / Lecture halls

� Retail stores / Shopping malls

� Any building………..

What you get:

� Data in real-time

� Acceptable air quality

� Reduced energy consumption


� Reduced energy consumption

� Accurate occupancy values

� Lower energy bills - Instant savings

� Meet Ashrae standards

ROI:


Payback TimeSystem Cost

Monthly Energy Saving

Typical ROI is in few months.

About Us:


Chipkin Automation –

Chipkin Automation systems is a specialist engineering company excelling in areas of protocol conversion and system integration. Established in 2000, Chipkinautomation system has made a long journey providing niche solutions for building automation systems integration. Our primary purpose is to provide our customers with excellent solutions, and support them till the project is successfully done with. Chipkin automation system has been leaving an impression by providing excellent services worldwide.services worldwide.

Feedback Solutions -Feedback Solutions was launched in July 2012 with the objective of providing a platform where companies can utilize our expertise as a 'People Counting Technology' provider to design and develop solutions that utilize Count Data to address specific needs within the company. Solutions that will not only help them but one that can be applied by many more. Presently, we service the 'Library' and 'Smart Building' segment. Libraries for basic patron counting while smart buildings use our technology to save on energy consumption.

Smart Building Solution - Chipkin Automation Systems · 2017. 2. 22. · Smart Buildings –...

Documents

Transcript of Smart Building Solution - Chipkin Automation Systems · 2017. 2. 22. · Smart Buildings –...