Smart Board

Computer

IPad

AirServer

AirServer- What is it?

No WIN XP

• Airserver will only work on the newer Windows 7 and Windows 8 computers that are connected to the Smart Boards.

• Windows XP computers will NOT be able to use Airserver.

Wireless

• The computer that is connected to the Smart Board needs to be running on the Wireless Network.

• If the computer that is connected to the Smart Board is plugged in with a network cable, you would need to unplug the network cable when using Air Serve (and remember to plug it in again when finished using it.)

Network cable- (may be a different color)

Unplug network cable from the computer

Wireless• Then go to the bottom right of your computer

display and open the Wireless Signal Connections.• Connect to the system that has “GUEST” in the

name. (No password would be required for that.)

Finding AirServer Icon• Click on the bottom right of your display to find the AirServer

icon in the tray.

• Click on Settings once you find the icon.

AirServer PW• When Settings opens you will find a screen under the General Tab that will allow

you to change the password.

• Then type in the password

you will use for your session.

You need to change the pass-

word for every session so that

The screen is not accessible by others when you do not want it to be.

That password would be

used by anyone who is displaying

their iPad to the main screen.

Using Airserver

• Click here for a short instructional video on how to use this application.

http://youtu.be/4yRT89GtZZA

Questions?

• If you have any errors or problems using Airserver and – you are sure that you are not running Windows XP– you are sure you are on the same network as the

iPad or iPHone (“Guest Network”)

• Then let your School Technology Coordinator know. They will fill out a Work Order and our technicians will help to find a solution.