Smart Baby Monitor User Manual

2

Inside the box

Smart Baby Monitor Carry bag Bedside stand

Li-ion battery Power supply + 3 local adaptors

User manual

3

From home or a friend's house

At home or away

Internet access, via Wi-Fi or an Ethernet cable

iPhone, iPad or iPod touch

Thank you for choosing the Smart Baby Monitor

The Smart Baby Monitor is a revolutionary baby monitor with the allure of an elegant white music box.

Watch over your child. Interact with him/her. Ensure your baby’s comfort from your iPhone, iPad or iPod touch, from anywhere and any time.

Before you start, you need:

4

1 Installing the battery

1

2

1

2

1. Slide open the battery compartment door.

2. Insert the battery.

3. Close the door.

5

2 Plugging in the monitor

1

2

1. Insert the local adaptor on the power supply unit.

2. Plug your Smart Baby Monitor into a power socket.

3. The night light turns blue, indicating the monitor is starting up.

6

3 Connecting the monitor to your iPhone, iPad or iPod touch

SBM-.... connected

Bluetooth

Before you begin, check that the light on the back of the monitor is blinking (start-up complete, waiting to be connected).

1. Be sure that your iPhone, iPad or iPod touch is connected to your home Wi-Fi network.

2. On your iPhone, iPad or iPod touch, go to «Settings», represented by the following icon:

3. Select «General» and then «Bluetooth».

4. Activate Bluetooth by sliding the switch button like this:

5. Select the Smart Baby Monitor from the list; its name starts with «SBM-...»

7

4 Installing the WithBaby application

WithBaby

Loading ...

1. Accept the automatic installation request by clicking on «Yes».

2. Wait until installation is complete.

3. Launch the WithBaby app and follow the instructions.

8

12

12

1. Attach the two parts together.

2. Attach your Smart Baby Monitor to the stand.

3. Place the stand on the side of the baby’s bed.

Installing the bedside stand (optional)

9

Your Smart Baby Monitor

High resolution wide angle video sensor

Microphones

Touch screen

Start / Stop Smart Baby Monitor

Start night light Reduce lullaby volume

Increase lullaby volume

Start / Stop lullaby

Multicolor night light Temperature and

humidity sensor

Loudspeaker (lullabies and parents' voices)

10

Your Smart Baby Monitor: rear view

Ethernet port Micro-usb port

Indicator light

11

Back color codes

no one can connect

Orange / Greenslow pulse:

no network connectivity

Red, rapid blinking: battery low

Fixed green: connected

Fixed orange: start-up in progress

12

TipsConnecting my iPhone, iPad or iPod Touch via Wi-Fi.When you’re using your monitor at home, we suggest you connect your iPhone via Wi-Fi in order to enjoy better video quality.

Get alerts whenever I want.Each parent can choose, individually, which alerts they want to receive (noise, movement, temperature and humidity) via the WithBaby app.

Closing my Smart Baby Monitor.When you close your Smart Baby Monitor, only the video is turned off. You can still receive alerts or listen in on your baby.

Using my Smart Baby Monitor at a friend’s.Once outside your home, your baby monitor automatically connects to your iPhone via Bluetooth so that you can monitor your baby without any Internet connection.

For other tips visit http://baby.withings.com

13

Troubleshooting The Smart Baby Monitor does not start. Make sure the power supply unit is plugged into a wall socket and connected to the back of the Smart Baby Monitor.

The Smart Baby Monitor is on, I’ve activated Bluetooth, but I don’t see my device in the list.For safety reasons, you only can pair with Bluetooth during the first 30 minutes after turning on the baby monitor. All you need to do is restart your monitor to see it in the list. If the problem persists, make sure you are at least 15 metres from your Smart Baby Monitor before trying again.

I’m connected via Bluetooth, but the iPhone app does not install automatically.Install the application manually:- Go to the App Store by clicking on the icon:

- Search for: WithBaby.- Install the WithBaby app, launch it and follow the instructions.

Having problems? We’re here to help! Visit us at http://baby.withings.com. You’ll find all the answers to the most frequently asked questions.

14

Safety instructionsThis product cannot replace adult supervision. Ensure your baby’s health by checking on him/her regularly.The temperature and humidity sensor only measures the temperature and humidity of the room your baby is in. It cannot be used to adjust the temperature or humidity of the room. Place the product at least 50 centimetres away from the baby.This product is not a toy. Do not allow children to play with it. Only use the power supply unit supplied with the product.Store the product in a clean, dry place at 0° to 50° C. Use the product exclusively at temperatures between 10°C and 35°C. This device is designed for indoor use only. Never use the product for extended periods in direct sunlight.

FCC Federal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-nications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfe-rence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.CE Europe – EU Declaration of ConformityThis device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:- EN 60950-1: 2010 Safety of Information Technology Equipment- EN 300 328 V1.7.1: 2006 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential require-ments under article 3.2 of the R&TTE Directive- EN 301 489-1 V1.8.1: 2008 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements- EN 301 489-17 V2.1.1 2009 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment- EN 62311: 2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz-300 GHz) (IEC 62311:2007 (Modified))This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.

15

0560

In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.

Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.Dansk [Danish] Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.Deutsch [German] Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden Anforde-rungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.Eesti [Estonian] Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Español [Spanish] Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cuales-quiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [name of manufacturer] ΔΗΛΩΝΕΙ ΟΤΙ [type of equipment] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.Français [French] Par la présente [nom du fabricant] déclare que l’appareil [type d’appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.Italiano [Italian] Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.Latviski [Latvian] Ar šo [name of manufacturer / izgatavotāja nosaukums] deklarē, ka [type of equipment / iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.Lietuvių [Lithuanian] Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.Nederlands [Dutch] Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.Malti [Maltese] Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.Magyar [Hungarian] Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.Polski [Polish] Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostałymi stosow-nymi postanowieniami Dyrektywy 1999/5/EC.Português [Portuguese] [Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras dis-posições da Directiva 1999/5/CE.Slovensko [Slovenian][Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.Slovensky [Slovak] [Meno výrobcu] týmto vyhlasuje, že [typ zariadenia] spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.Suomi [Slovak] [Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.Svenska [Swedish] Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

P/N: WBP01

User manual v0.6 - January 2, 2012© 2011 Withings. All rights reserved.iPad, iPhone and iPod touch are trademarks of Apple inc.