Small Track-Type Tractor Application...
Transcript of Small Track-Type Tractor Application...
1. Wear Safety Equipment.2. Keep hands and feet clear.3. Beware of flying objects.
Prior to removing any pins or parts refer to Manufacturers Service manual for proper procedures for securing and stabilizing equipment.
MACHINE MODELSCASE 550H LGP, 550H LT, 550H WTCAT D3GDEERE 450J LT, 450J LGPKOMATSU D31EX-21, D31PX-21NEW HOLLAND DC75LGP, DC75LT, DC75WT
1234567
Ripper Tip/Shank ProtectorCarriage Pin/Tool Bar PinTool Bar LinkLift Cylinder PinTool Bar LinkFrame End Angle CylinderRod End Angle Cylinder
1
3
4
5
2
76
See back for Pin Removal / Insertion specifications and recommended Slide Sledge® tool kit.
Small Track-Type Tractor Application ChartOperating Weight: 14,000 - 20,000 lb.
The following removal and insertion tips are manufacturer recommendations for this model. Other model track-type tractors may use similar tips and tools for similar removals. Consult with manufacturer for specific models and uses.
Removal and installation should only be performed on pins that have been properly serviced and maintained.
Tool/Tip Description Part##1
#2
#3
#4
#5
#6
#7
R/I ToolR/I TipR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I Tip
Item9 lb./30” Slide Sledge3/8” Bucket Tooth Remover3/8” Bucket Tooth Inserter9 lb./30” Slide Sledge7/8" Pin Driver9 lb./30” Slide Sledge7/8" Pin Driver9 lb./30” Slide Sledge7/8" Pin Driver9 lb./30” Slide Sledge7/8" Pin Driver9 lb./30” Slide Sledge1 1/4” Pin Driver9 lb./30” Slide Sledge1 1/4” Pin Driver
211103213305213306211103213102211103213102211103213102211103213102211103213103211103213103
Recommended Tool Kit for Small Track-Type TractorProduct Part#9 lb./30” Slide Sledge3/8” Bucket Tooth Remover3/8” Bucket Tooth Inserter7/8" Pin Driver1 1/4” Pin Driver5 lb. Handle Weight
211103213305213306213102213103211808
Small Track-Type Tractor Application ChartOperating Weight: 14,000 - 20,000 lb.