SMALL PORTABLE PUMPS - Atlas Copco · Pump housing EN-GJL-200 cast iron EN-GJL-200 cast iron Shaft...

8
SMALL PORTABLE PUMPS Centrifugal and diaphragm self-priming portable pumps.

Transcript of SMALL PORTABLE PUMPS - Atlas Copco · Pump housing EN-GJL-200 cast iron EN-GJL-200 cast iron Shaft...

Page 1: SMALL PORTABLE PUMPS - Atlas Copco · Pump housing EN-GJL-200 cast iron EN-GJL-200 cast iron Shaft C45 Steel C45 Steel Mechanical seal Silicon Carbide Silicon Carbide Elastomers Nitrile

SMALL PORTABLE PUMPSCentrifugal and diaphragm self-priming portable pumps.

Page 2: SMALL PORTABLE PUMPS - Atlas Copco · Pump housing EN-GJL-200 cast iron EN-GJL-200 cast iron Shaft C45 Steel C45 Steel Mechanical seal Silicon Carbide Silicon Carbide Elastomers Nitrile

2

SMALL PORTABLE PUMPSThe range of small pumps was carefully chosen to ensure we can cover the maximum amount of applications. The balance of portability and power means you can easily transport them to your application site. The rugged, high performance features ensure performance – even in the harshest of environments.

0 Q[m3/h]

Q[l/min]

0

5

10

15

20

25

50 100 150

0 1000 2000 3000

30H[m]

PERFORMANCE CURVES

FORWARD-THINKINGWithin Portable Energy we have a forward-thinking philosophy. Our small pump range was developed in-line with that philosophy. Forward-thinking is all about anticipating and exceeding your future needs: from product design, energy requirements and all aspects of service – looking ahead and staying ahead is the only way we can ensure we are your long term partner.

ETP 50B ETP 80B ETP 100B/D VAR 1-110 LIFT VAR 2-120 LIFTLB 80 (ALL MODELS) LB 100 (ALL MODELS)

You.Not us

Engineered.Not assembled

Efficient.Not wasteful

Uptime.Not downtime

Leader.Not follower

Solutions.Not compromise

Page 3: SMALL PORTABLE PUMPS - Atlas Copco · Pump housing EN-GJL-200 cast iron EN-GJL-200 cast iron Shaft C45 Steel C45 Steel Mechanical seal Silicon Carbide Silicon Carbide Elastomers Nitrile

3

www.atlascopco.com

Model VAR 1-110 LIFT VAR 2-120 LIFT

Suction/discharge 1 1/2" BSP threaded 2" BSP threaded

Max. flow rate l/min 416 566

Max. head m 24 22,5

Solids handling mm 20 (0,8") 17 (0,7")

Weight (dry) kg 26 41

Pump set

Impeller type Semi-open, 3 vane Semi-open, 3 vane

Impeller EN-GJL-200 cast iron EN-GJL-200 cast iron

Wear plate EN-GJL-250 cast iron EN-GJL-250 cast iron

Pump housing EN-GJL-200 cast iron EN-GJL-200 cast iron

Shaft C45 Steel C45 Steel

Mechanical seal Silicon Carbide Silicon Carbide

Elastomers Nitrile rubber Nitrile rubber

Non-return valve Nitrile rubber Nitrile rubber

Engine

Model Honda GX 120Gasoline, aspirated

Honda GX 240Gasoline, aspirated

Displacement cm³ 118 270

Number of cylinders 1 1

Max power kW 2,1 4,7

Speed rpm 3600 3600

Starter type recoil recoilNumber of cylinders 1 1

Fuel consumption

Max. fuel consumption l/h 1 1,5

CENTRIFUGAL SELF-PRIMING GASOLINE PORTABLE PUMPSVAR 1-110 LIFT AND VAR 2-120 LIFT

The VAR series offers two models. Both are lightweight, highly portable, self-priming, gasoline driven pumps. The VAR models are ideal for multiple applications, including emergency use, general construction and industrial dewatering.

They are the perfect pump to keep on site or in your truck. They are designed to be operational and performing at a moment’s notice – ready to go, when you need them.

• Portable and lightweight• Solids handling capability• Low fuel consumption• Self-priming (wet prime) with a

suction lift up to 7,5m

KEY FEATURES

SPECIFICATIONS

Page 4: SMALL PORTABLE PUMPS - Atlas Copco · Pump housing EN-GJL-200 cast iron EN-GJL-200 cast iron Shaft C45 Steel C45 Steel Mechanical seal Silicon Carbide Silicon Carbide Elastomers Nitrile

4

CENTRIFUGAL SELF-PRIMING PORTABLE PUMPSETP 50B, ETP 80B, ETP 100B, ETP 100D

Model ETP 50B ETP 80B ETP 100B ETP 100D

Suction/discharge 2" BSP thread 3" BSP thread 4" BSP thread 4" BSP thread

Max. flow rate l/min 830 1500 2500 2500

Max. head m 28 28 29 29

Solids handling mm 27 (1,06") 38 (1,50") 40 (1,60") 40 (1,60")

Weight (dry) kg 34 76 85 102

Pump set

Impeller type Semi-open Semi-open Semi-open Semi-open

Impeller EN-GJL-250 cast iron

EN-GJL-250 cast iron

EN-GJL-250 cast iron

EN-GJL-250 cast iron

Volute EN-GJL-250 cast iron

EN-GJL-250 cast iron

EN-GJL-250 cast iron

EN-GJL-250 cast iron

Wear plate EN-GJL-250 rubber lined cast iron

EN-GJL-250 rubber lined cast iron

EN-GJL-250 rubber lined cast iron

EN-GJL-250 rubber lined cast iron

Pump casing UNI 3600 GAlSi5 aluminium alloy

UNI 3600 GAlSi5 aluminium alloy

UNI 3600 GAlSi5 aluminium alloy

UNI 3600 GAlSi5 aluminium alloy

Mechanical seal Silicon carbide / Silicon carbide

Silicon carbide / Silicon carbide

Silicon carbide / Silicon carbide

Silicon carbide / Silicon carbide

Elastomers Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber

Non-return valve Nitrile rubber - Galvanized steel

Nitrile rubber - Galvanized steel

Nitrile rubber - Galvanized steel

Nitrile rubber - Galvanized steel

Engine

Model Honda GX160Gasoline

Honda GX270Gasoline

Honda GX390Gasoline

Lombardini 15LD500Diesel

Displacement cm³ 163 270 389 505

Number of cylinders 1 1 1 1

Max power kW 4 6 9,6 7,5

Speed (variable max) rpm 3600 3600 3600 3600

Starter type recoil recoil recoil recoilNumber of cylinders 1 1 1 1

Fuel consumption

Fuel tank capacity l 3,6 5,3 6,5 5

Max. fuel consumption l/h 1,4 2,5 3,4 2,2

The ETP series offers four models. All are lightweight, highly portable, self-priming pumps. We offer three models which are gasoline driven. The ETP 100D model is also available with diesel power. This range of versatile pumps can be used across many applications and are great for emergency use and non-planned events.

• Portable and lightweight• Easy maintenance – no special

tools needed• Solids handling capability• Low fuel consumption• Self-priming (wet prime) with a

suction lift of 7,5m• Trolley version available

(only ETP 100)

KEY FEATURES

SPECIFICATIONS

Page 5: SMALL PORTABLE PUMPS - Atlas Copco · Pump housing EN-GJL-200 cast iron EN-GJL-200 cast iron Shaft C45 Steel C45 Steel Mechanical seal Silicon Carbide Silicon Carbide Elastomers Nitrile

5

www.atlascopco.com

DIMENSIONS ETP, VAR

DIMENSIONS ETP

DIMENSIONS VAR

ETP 50B ETP 80B

ETP 100B / 100D ETP 100B / 100D TROLLEY

405 (15.9")

485 (19.1") 350 (13.8")

125 (4.9")

30 (1.2")

75 (3

.0")

215

(8.5

")

515

(20.

3")

405 (15.9") 90 (3.5")

495 (19.5")

515

(20.

3")

185

(7.3

")11

0 (4

.3")

350 (13.8")

25 (1.0")

VAR 1-110 LIFT VAR 2-120 LIFT

675

mm

1701 mm

934 mm

575 mm

275

mm 58

7 m

m

440 mm

774 mm

1330 mm

370

mm

833 mm564 mm

629

mm

464

mm

368

mm

1417 mm

840

mm

801 mm575 mm

1280 mm894 mm

Page 6: SMALL PORTABLE PUMPS - Atlas Copco · Pump housing EN-GJL-200 cast iron EN-GJL-200 cast iron Shaft C45 Steel C45 Steel Mechanical seal Silicon Carbide Silicon Carbide Elastomers Nitrile

6

DIAPHRAGM SELF-PRIMING PORTABLE PUMPS

LB 80B, LB 80D, LB 80E, LB 100B, LB 100D, LB 100E

The LB pump series offers two models, each with three options on the power source. To enable maximum versatility and to make a pump that fits with your needs, we offer a choice of gasoline, diesel or electric power.

The LB series was made for tough applications and excels when it comes to pumping sludgy water or water with large solids. Despite its extreme ruggedness, the LB pump series maintains the extreme portability you have come to expect from our small pump range.

• Recirculation of bentonite and drilling mud• Sludge removal• Pumping sewage or other liquids containing

fibrous material• Pumping cutting or dressing water circulation

in stone industries• Cleaning manholes

TYPICAL APPLICATIONS

DIMENSIONS LB 80 (ALL MODELS) DIMENSIONS LB 100D-E (B GASOLINE)

DIMENSIONS LB

745 (905) mm

500 (660) mm

950 mm 359 mm

251

mm

232

mm

478 mm

800

mm

735 mm

1490 mm

1100 mm

885

mm

Page 7: SMALL PORTABLE PUMPS - Atlas Copco · Pump housing EN-GJL-200 cast iron EN-GJL-200 cast iron Shaft C45 Steel C45 Steel Mechanical seal Silicon Carbide Silicon Carbide Elastomers Nitrile

7

www.atlascopco.com

Model LB 80B LB 80D LB 100B LB 100D LB 80E LB 100E

Suction/discharge 3" BSP thread 3" BSP thread 4" BSP thread 4" BSP thread 3" BSP thread 4" BSP thread

Max. flow rate l/min 325 325 530 530 325 520

Max. head m 15 15 15 15 15 15

Solids handling mm 50 (2") 50 (2") 60 (2,3") 60 (2,3") 50 (2") 60 (2,3")

Max. viscosity cST 1000 1000 1000 1000 1000 1000

Weight (dry) kg 74 92 144 155 71 137

Pump set

Pump type Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm Diaphragm

Membrane Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene

Casted parts Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

Discharge / suction Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

Valves Neoprene Neoprene Neoprene Neoprene Neoprene Neoprene

Dimensions

L x W x H mm 950 x 735 x 800 950 x 735 x 800 1100 x 905 x 885 1100 x 745 x 885 950 x 735 x 800 1100 x 745 x 885

SPECIFICATIONS

Model LB 80B LB 80D LB 100B LB 100D

Model Honda GX 160Gasoline”

Lombardini 15LD225Diesel

Honda GX 270Gasoline

Lombardini 15LD350Diesel

Displacement cm³ 163 224 389 349

Number of cylinders 1 1 1 1

Max power kW 3,3 2,7 5,7 4

Speed rpm Variable max 2900 Variable max 2900 Variable max 2800 Variable max 2800

Starter type recoil recoil recoil recoil

Fuel consumption

Fuel tank capacity l 3,6 3 6,5 4,3

Max. fuel consumption l/h 1,2 0,8 2,7 1,2

ENGINE - DIESEL & GASOLINE

Model LB 80E LB 100E

Model Electric - Three-phase Electric - Three-phase

Voltage V 230 / 400 230 / 400

Frequency Hz 50 50

Rated power kW 2,2 3

Rated current A 4,5 (400 V) 6,3 (400 V)

Speed rpm 2900 1450

ENGINE - ELECTRIC

Page 8: SMALL PORTABLE PUMPS - Atlas Copco · Pump housing EN-GJL-200 cast iron EN-GJL-200 cast iron Shaft C45 Steel C45 Steel Mechanical seal Silicon Carbide Silicon Carbide Elastomers Nitrile

8

2958

111

0 00

v02

- ©

201

8 A

tlas

Cop

co P

orta

ble

Ene

rgy

All

right

s re

serv

ed.®

Atla

s C

opco

is a

regi

ster

ed tr

adem

ark

of A

tlas

Cop

co A

B

Photos and illustrations contained herein might depict products with optional and/or extra components which are not included with the standard version of the product and, therefore, are not included in a purchase of such product unless the customer specifically purchases such optional/extra components. We reserve the right to change the specifications and design of products described in this literature without notice. Not all products are available in all markets.

Product Portfolio

LIGHT TOWERS

LED METAL HALIDE

ELECTRIC

AIR COMPRESSORS

READY TO GO• 1-5 m³/min• 7-12 bar

VERSATILITY• 5,5-22 m³/min• 7-20 bar

PRODUCTIVITY PARTNER• 19-116 m³/min• 10-345 bar

Diesel and electric options available

Diesel and electric options available

PORTABLE• 1,6-12 kVA

MOBILE• 9-1250* kVA

INDUSTRIAL• 10-2250* kVA

GENERATORS

*Multiple configurations available to produce power for any size application

DEWATERING PUMPS

ELECTRIC SUBMERSIBLE• 250-16.500 l/min

CENTRIFUGAL• 833-23.300 l/min

SMALL PORTABLE• 210-2500 l/min

Committed to sustainable productivityAtlas Copco’s Power Technique business area has a forward-thinking philosophy.For us, creating customer value is all about anticipating and exceedingyour future needs – while never compromising our environmentalprinciples. Looking ahead and staying ahead is the only way we canensure we are your long term partner.

www.atlascopco.com