M ( 1 : 4 )

M

ASGARD MINI PARCEL

BOXITEMNO

PARTDESCRIPTION

QTY

1

2

3

1

4

1

ASGARDASGPAR1###

INSTALLATION INSTRUCTIONS

BASE INSTRUCTIONSA FIRM, LEVEL ,FLAT SURFACE IS REQUIRED AS A BASE FOR THIS UNIT SUCH AS CONCRETE OR FLAGS.- MINIMUM BASE MEASUREMENT (450W*300D)TOOLS REQUIRED - POSI-DRIV SCREWDRIVER (POWER DRIVER RECOMMENDED) - 6mm DIA MASONRY DRILL - 13mm SOCKET SPANNER (FOR ANCHOR FIXINGS)

OPTION 2 ANCHORING UNIT TO SLAB

THIS UNIT CAN BE FITTED TO A PRE PREPARED FIRM LEVEL SURFACEUSING THE SAME MOUNTING PLATE.

- MARK THROUGH THE FOUR HOLES IN THE BRACKT. DRILL THE BASE USING 6mm DIA MASONRY DRILL TO A DEPTH OF 70mm. - SCREW IN THE ANCHOR FIXINGS. (THESE HAVE A SELF CUTTING THREAD)THEN FIX THE BOX ONTO THE BRACKETUSING THE 4OFF M6 MC SCREWS PROVIDED

PLEASE SEE OUR WEBSITE FOR DETAILSOF MAINTENANCE OF THIS PRODUCTWWW.ASGARDSSS.CO.UK

ZSCREW32M7.5*60 ANCHOR BOLT

PT NO 045294WALL HANGING PLT ASSY

045760

HDU BOX ASSY

OPTION 1 WALL FIXING UNIT

THIS UNIT HAS BEEN DESIGNED SO IT CAN BE WALL MOUNTED.HOLD WALL MOUNTING PLATE UP TOWALL WHERE BOX IS REQUIRED.MARK THROUGH HOLES AND DRILL 4 HOLES 6MMDIA X 70 DP. FIX BRACKET TO WALLWITH ANCHOR BOLTS PROVIDED. THEN SCREW THOUGH BACK OF BOX TO THE WALL MOUNT BRACKET USING 4 OFF M6 MC SCREWS PROVIDED.

SHOULD THE WALL BE UNSUITABLEFOR THE 70 MM ACHOR BOLTS THE CUSTOMER WILL HAVE TO MOUNT THE MOUNTING PLATE USING SUITABLE SCREWS / FIXINGS

4 4

ZSCREW249

M6X12 RD HD POSI MC SCREW BZP

NOTE: THE WALL MOUNTING PLATE IS DESIGNED TO SPACE THE BOX OFFTHE WALL ENOUGH TO ALLOW THE BOX TO OPEN IF THE WALL IS VERY UNEVEN THE BRACKET MAY NEED PACKING OFF MORE. WHEN FLOOR STANDING NEAR A WALL PLEASE ALLOW ENOUGH SPACEFOR LID TO OPEN ,25 MM BEYOND BACK OF BOX

THIS UNIT CAN BE WALL MOUNTED (SEE OPTION 1) OR FLOOR STANDING (SEE OPTION 2)

OPENING SIZE :400X248MM

OPTION 1 WALLFIXING UNIT

OPTION 2 ANCHORING UNIT TO SLAB

5 1ZST197 ASGARD PARCELDELIVERY BOX LABEL