Small Falling Objects Brochure
-
Upload
pryme-australia -
Category
Documents
-
view
224 -
download
3
description
Transcript of Small Falling Objects Brochure
29
SHAX® 6098 OPTIONAL SIDE PANEL
Part No. Description Units
12998 Lime Each
pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
SMALL FALLING OBJECTS PREVENTION PROGRAM
SQUIDS TOOL LANYARDS, AERIAL TOOL BELTS, LIFT BUCKETS, TIE HOOKS & GRABBERS
100
10
1
0.10 1 2 3 4 5 6 7 8 9 10
LTI = Lost Time Incident / DAFWC = Days Away From Work Case
Dro
pp
ed
He
igh
t (m
etr
es)
Mass (kg)
FALLING OBJECTS CALCULATOR
“A 1kg spanner dropped from a height of 4 meters will hit the ground traveling at over 30km/h”
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
AUSTRALIA
NEW ZEALAND
SINGAPORE
DANGERS OF SMALL FALLING OBJECTS
FALLING OBJECTS
LARGEFALLING OBJECTS
SMALLFALLING OBJECTS
WORKERFALLS
TOOLS
PPE
PORTABLEEQUIPMENT
MATERIALS& PARTS
DEBRIS
AUSTRALIA NEW ZEALAND SINGAPORE
EMPLOYER OBLIGATIONS
This brochure provides a step-by-step guide to preventing Small Falling Objects with the latest in small falling objects prevention technologies and best industry practice.
Small falling objects pose serious hazards in the workplace. On most workplaces small objects are varied from hand held tools and equipment to small debris. Small objects are high in number and their size makes them hard to control. Even a 1kg spanner dropped from a height of 4 metres will hit the ground travelling over 30km/h.
Controlling the hazards small objects create pose a number of challenges. Without the correct controls, small falling objects can:• Cause injury and death• Damage property• Create tool damage• Damage equipment below• Lost time recovering fallen tools
Studies show that 30% of falling object incidents
arise from mechanical, technical and design
issues, whilst almost 50% occur from human error.
Workplace Safety & Health (2008) statistics show being struck by falling objects is the second most common cause of workplace fatalities in Singapore and a leading cause of workplace injuries.
In a report commissioned by the Ministry of Innovation & Employment, every year in New Zealand around 100 people die from fatal workplace injuries of which people struck by falling objects is a leading cause.
According to the Notified Fatalities Statistics Report 2009-2010, 14% of fatalities in Australian workplaces from 2004-2010 were attributed to objects falling from heights.
Sections 34-38 of the Workplace Health & Safety (WHS) Act 2011, requires employers to minimise risks where reasonably practical to employees. To help Employers comply the WHS legislation, Safe Work Australia in 2012 published the “Falling Objects Fact Sheet” that requires tools and materials to be tethered when working at heights.
According to the publication,Guidelines for the Prevention of Falls to meet the Requirement of the Health Safety in Employment Act 1992, all tools and equipment are to be attached by a cord unless another effective method is used to prevent a falling hazard. AS/NZS 4488 also requires all tools and equipment to be tethered when working at heights.
In the Code of Practice for Working Safely at Height, section 10.2.7.4 stipulates that risks of falling objects must be mitigated, small tools must be secured to the person with the use of a lanyard. The Act also requires employers not to merely follow the law but take reasonable practical steps to proactively reduce risk to Employees.
30
WATCH THE VIDEO
http://bit.ly/1yovxZK
HEIGHT SAFETY
31 pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
RISK CONTROLS
IDENTIFYING HAZARDS
ELIMINATION
SUBSTITUTION
ENGINEERING
ADMINISTRATIONPPE ADMINISTRATIVE
Visit www.pryme.net.au/small-falling-objects to download your Free Educational Tools
TOP CAUSES OF FALLING OBJECTS
Prior to commencing any task that requires working from heights the following steps can help identify potential small falling object hazards.
1. Look for any environmental factors such as wind, rain, drafts, heat etc.
2. Identify sources of energy that can cause falling objects for example gravity, mechanical movement, electrical, pressurised equipment and vibration.
3. Prior to starting work visually inspect the area for preexisting hazards such as debris and loose items.
4. Make sure all safety securing features are in use.5. Look for any collision or snagging hazard with fixtures
and in particular moving or rotating machinery.6. Pay special attention to corroded bolts and brackets.7. Check what controls are in place for example:
scaffolding, toe boards, barriers, netting, etc.8. Inspect all equipment and tools for damage,
attachment points, lanyards, lift buckets, ropes and tool belts.
9. Remove any loose items or equipment.
1. Inadequate risk assessment
2. Human error
3. Inadequate procedures
4. Failed fittings and hazards
5. Poor housekeeping
6. Snaggings & collisions
7. Inadequate repairs & inspections
8. Neglected & home made tools
9. Inadequately stored or secured tools & equipment
Source: Dropped Objects Awareness & Prevention: Reliable Securing. Revision 03. www.dropsonline.org
TO DOWNLOAD EDUCATIONAL TOOLS VISITWWW.PRYME.NET.AU/SMALL-FALLING-OBJECTS
When working at heights, examples to eliminate small falling object hazards include:• Leave any tools and equipment not required for the job at
ground level.• Remove debris from the work area prior to commencing work.• If there is any energy sources in the work area, such as
mechanical rotation, if possible turn them off prior to starting the job.
• If environmental conditions pose a source of danger, such as strong winds, consider rescheduling work.
Hazards can be substituted for ones that pose a lower risk. Examples include:• Consider prefabricating
components at ground level and hoist into place.
• Investigate the possibility of substituting ladders for elevated work platforms.
PPE is only to be used as a last resort to control risks, examples include:• Hard hats and steel
capped boots.• Individual fall arrest
systems, such as harnesses, lifelines, etc. For more information refer to Managing the Risk of Falls at Workplaces, Safe Work Australia (2011).
There are a number of engineering controls to minimise risks of falling objects, examples include:• Temporary work platforms, perimeter guard rails,
safety mesh, industrial rope access systems, catch platforms, industrial safety nets, toe boards and rails. For more information refer to Managing the Risk of Falls at Workplaces, Safe Work Australia (2011).
• Tool lanyards and topped containers can also be utilised as engineering controls
When working at heights, administrative controls should be implemented, examples include:• “No Go” areas that prohibit unauthorised people from
entering areas. Permit systems can also be used to restrict access.
• Sequence work to reduce risk, for example so trades are not working above and below each other at the same time.
• Staff training, risk assessment and safe work procedures. For more information
32pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
WEB TOOL TAIL ELASTIC LOOP TAIL
0.9Kg Max* 4.5Kg Max* 6.8Kg Max*
MODEL NO. PART NO. MODEL
NO. PART NO. MODEL NO.
PART NO.
3700
19703
3703
3703EXT
3713
19767
3703
3703EXT19769
19704
1970519765
19706
Tool Trap
Solution
Tool Trap
Model
Number
Tool Tail Model
(Type)
Tool Diameter
Min/Max (mm) Tool Diameter
Min/Max With Capacity
3723 3703 (Elastic) 16-3816-32mm 0.9kgs
32-38mm 2.3kgs
3724 3703 (Elastic) 38-4532-38mm 2.3kgs
38-45mm 4.5kgs
3726 3703EXT (Elastic) 45-6345mm-57mm 4.5kgs
57mm-63mm 6.8kgs
37503700 (Web)
All Diameters All Diameters0.9kgs
3703 (Elastic) 6.8kgsTAPE TRAP
SHRINK TRAP
OR
Shackle Solution A B C
3790S 19mm 10mm 5mm
3790M 26mm 12mm 5mm
3790L 32mm 16mm 8mm
3790XL 38mm 20mm 10mm
A
C
B
STEP SELECT TAILS & TRAPS
Catalogue all tools and equipment used at heights. For tools and equipment that do not have attachment points, select a tail and trap or a shackle.
SELECT TRAP
SELECT SHACKLE
SELECT TAIL1
2
WHAT TO DO...
3
Select a tail and trap or a shackle.
WEB TOOL TAIL
ELASTIC LOOP TAIL
*Note - Max denotes the maximum weight of the item to tether
TO READ ABOUT SELECTING TAILS VISIThttp://bit.ly/1Dqhoji
33 pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
ERGODYNE® SQUIDS® 3713 ELASTIC LOOP TOOL TAILS SWIVEL
ERGODYNE® SQUIDS® 3703, 3703EXT ELASTIC LOOP TOOL TAILS
Elastic loop Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 6.8kg using Squids® Tool Traps™. These Tool Tails™ can also be used as an anchor point on a belt, harness or separate structure.
Part No. Description Units
19767 3703 Standard 29cm Lime 3 Tails per Pack
19769 3703EXT Extended 46cm Lime 3 Tails per Pack
KEY FEATURES• Stretch cord surrounded by tubular nylon
webbing• Lock stitching at both ends for extra
security• Adjustable barrel lock for tool attachment• Fully enclosed plated O-ring for secure
attachment• Maximum safe working capacity 6.8 kg• Doubles as an anchor loop for belt, harness
or separate structure• Third party tested using a 2:1 safety factor• 6 Per Case
KEY FEATURES• Plated swivelling connection• Doubles as an anchor loop
for belt, harness or separate structure
• Maximum safe working capacity: 4.6 kg
• Third party tested using a 2:1 safety factor
• Stretch cord surrounded by tubular nylon webbing
• Lock stitching at both ends for extra security
• Adjustable barrel lock for tool attachment
• 6 Per Case
Part No. Description Units
19765 Swivel Elastic Loop Tool Tail 3 Tails per Pack
Elastic loop Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 6.8kg using Squids® Tool Traps™. These Tool Tails can also be used as an anchor point on belt, harness or separate structure.
PACK OPTIONS
6 packs per Case
PACK OPTIONS
6 packs per Case
INSPECTING TOOL CONNECTORShttp://bit.ly/1D7cVo0
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
NE
RG
ON
OM
ICS
& S
AF
ET
Y P
RO
TE
CT
ION
34pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
ERGODYNE® SQUIDS® TAPE TRAP
ERGODYNE® SQUIDS® 3700 WEB TOOL TAILS
Web Tool Tails™ provide retrofit attachment points to a variety of tools and equipment up to 0.90kg using Squids® Tool Traps™.
KEY FEATURES• Ultra strength nylon webbing• Fully enclosed plated D-ring
for secure attachment• High tensile strength nylon
thread• Web catch with double stitch
for more durable stopping point
• Available in five colour coded lengths
• Third party tested using a 2:1 safety factor
• 6 Per Case
Part No. Description Units
19703 Web Tool Tails (9cm) Black 6 Tails per Pack
19704 Web Tool Tails (11.5cm) Orange 6 Tails per Pack
19705 Web Tool Tail (14cm) Black 6 Tails per Pack
19706 Web Tool Tails (16.5cm) Orange 6 Tails per Pack
19708 Web Tool Tails (21.5cm) Black 6 Tails per Pack
Tape Traps capture Squids® Elastic Tool Tails™ creating a retrofit connection point for tethering.
KEY FEATURES• Non-silicone based makeup works well in a variety of applications• No adhesives so it can be replaced without a mess• Sealed and set with heat application to finish application and secure• Cut and puncture resistant compared to other tool tapes• Material content and finish provides added grip to the handle of a tool• Maximum safe working capacity: 6.8 kg depending on length, tool, tail
and lanyard used• 6 Per Case
Part No. Description Units
19760 3705S - Tape Trap 3.65m Roll Each
19761 3705M - Tape Trap 9.14m Roll Each
MEASURE IT WRAP IT HEAT IT LAY IT DOWN TETHER IT
USING SQUIDS® TAPE TRAPS
PACK OPTIONS
6 packs per Case
PACK OPTIONS
6 per Case
WATCH THE VIDEO
http://bit.ly/1yX6fr1
TAPE TRAPS
ERGODYNE® SQUIDS® 3780S 3780L POWER TOOL TRAP
ERGODYNE® SQUIDS® 3770 TAPE MEASURE TRAP
35 pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
Power Tool Trap securely wraps around the battery portion of drills, impact drivers and other cordless power tools. D-Ring connection point attaches to a lanyard to prevent drops.
KEY FEATURES• 1000D nylon with water
resistant backing• Two hook and loop straps
secure battery boot to drill battery for safe and easy tethering
• Nickel-plated cast iron D-Ring• Maximum safe working
capacity: 6 lbs. (2.7 kg)• Third party tested using a 2:1
safety factor• Large - Will fit cordless power
tool batteries up to: 5”L x 3.5”W x 3.5”H (12.5cm x 9cm x 9cm)
• Small - Will fit cordless power tool batteries up to: 3.5”L x 2.75”W x 2.5”H (9cm x 7cm x 6.5cm)
Part No. Description Units
19782 3780S - Black Each
19784 3780L - Black Each
PACK OPTIONS
6 per Case
Tape Measure Trap securely wraps around most standard tape measures. D-Ring connection point attaches to a lanyard to prevent drops.
KEY FEATURES• 1200D and 600D polyester main
material• Hook and loop straps secure tape
measure inside trap for safe and easy tethering
• Zinc-plated cast alloy D-Ring• Maximum safe working capacity: 2
lbs. (0.9 kg)• Third party tested using a 2:1 safety
factor
Part No. Description Units
19770 Orange Each
PACK OPTIONS
6 per Case
WATCH THE VIDEO
http://bit.ly/1GJrOuk
3780 TRAP
WATCH THE VIDEO
http://bit.ly/1BSGuLT
3770 TRAP
36pry
me.n
et.
au
ERGODYNE® SQUIDS® TOOL SHACKLES
ERGODYNE® SQUIDS® 3723, 3724, 3726 SHRINK TOOL TRAP
KEY FEATURES• 19723 Fits tool diameter range
16mm - 32mm• 19724 Fits tool diameter range
32mm - 45mm• 19725 Fits tool diameter 45mm - 63mm• Cold Shrink technology from
3M requires no heat source• No additional tools needed to
ensure a secure connection on tool
• EPDM rubber material resists acids, alkalies and extreme temps
• Patent Pending application is the quickest and easiest way to create an attachment point
• Maximum safe working capacity: 6.8kg depending on tool, tail and lanyard used
• Third party tested using a 2:1 safety factor
Cold Shrink Traps capture Squids® Elastic Tool Tails™ creating a retrofit connection point for tethering.
Part No. Description Units
19723 Shrink Tool Trap 2.3kg Each
19724 Shrink Tool Trap 4.5kg Each
19726 Shrink Tool Trap 6.8kg Each
PULL CORD TO ATTACH
SHRINK TRAP TO TOOL &
TAIL
KEY FEATURES• Stainless steel (#304) material is corrosion resistant• One step retrofit attachment for temporary or permanent connection
point• Connects around midsection of a waisted tool• Connects through eye of a captive tool to create a more accessible
tethering point• Secure by adding a drop of adhesive and tightening with wrench or pliers• Maximum safe working capacity:
6.8 kg depending on model, tool and lanyard used• 24 Per Case
Part No. Description Units
19792 Small Each
19793 Medium Each
19794 Large Each
19795 Extra Large Each
PACK OPTIONS
6 per Case
PACK OPTIONS
6 per Case
Stainless steel U shaped shackles connect to waisted tools (tapered mid sections) or tools with captive holes, creating clean, secure attachment points for tethering.
WATCH THE VIDEO
http://bit.ly/1uVp0LA
SHRINK TRAP
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
37 pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
ERGODYNE® SQUIDS® 3115 WRIST TOOL LANYARD
ERGODYNE® SQUIDS® 3100, 3100EXT SINGLE CARABINER
KEY FEATURES• Stretch cord surrounded by tubular nylon
webbing• Lock stitching at both ends for extra
security• Aluminium carabiner• Adjustable barrel lock for tool attachment• Maximum safe working capacity: 4.6 kg• Standard 89cm-107cm• Extended 107cm-137cm
Tool Lanyard-Single Carabiner: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.
Part No. Description Units
19003 Lime Each
19013 Lime - Extended Each
KEY FEATURES• Polyester webbing cuff secures to wrist• Ribbed pull cord• Adjustable barrel lock for tool attachment• Maximum safe working capacity: 0.9 kg• Tether length 19cm• Wrist Measurement: S/M 13cm – 18cm• Wrist Measurement: L/XL 18cm – 22cm• Black• 6 Per case
Wrist Tool Lanyard: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools.
Part No. Description Units
19042 Small/Medium Each
19052 Large/X-Large Each
PACK OPTIONS
6 per Case
PACK OPTIONS
6 per Case
Identify hazards in your at heights environment. Select lanyards to tether all loose tools, equipment & hoist buckets to minimise hazards identified in the risk assessment.
WHAT TO DO...STEP SELECT LANYARDS
LANYARD FEATURE
LANYARD MODEL NUMBER
3000 3001 3115 3104 3102 3100 3108 3111 3311 3119
Weight Max (kg) 0.46 0.9 0.9 2.0 2.3 4.6 4.6 6.8 6.8 9.0
Minimise Tangle & Twist Hazard
(Ideal for small tools & equipment)
Detachable X X X
Retractable X X
Swivel X X X X
Minimise Marring Hazard Single Loop X X X X X X
Minimise Sparking & Marring Dual Loop X
Extra Secure Connection - Corrosive Environment
Locking Carabiner X X X
Screw Gate X X X X X
Most Secure Connection - Corrosive Environment
Dual Leg X
Triple Locking X
WATCH THE VIDEO
http://bit.ly/1EMX6lj
TOOL LANYARDS
38pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
ERGODYNE® SQUIDS® 3130S 3130M COILED CABLE LANYARD
ERGODYNE® SQUIDS® 3119, 3119EXT TRIPLE-LOCKING DUAL CARABINER
KEY FEATURES• Stretch cord surrounded by tubular nylon webbing• Lock stitching at both ends for extra security• Heavy-duty (8KN) triple-locking carabiner• Carabiner features 360 degree swivel captive-eye• Adjustable barrel lock for tool attachment• Maximum safe working capacity: 9.0 kg• Standard 89cm-107cm• Extended 107cm-137cm
Tethers tools to help workers prevent injury, damage and lost productivity from dropped tools. Swiveling triple locking carabiners
provide secure connection and prevent twisting and tangling
while performing job.
KG LOAD9LIMIT
Part No. Description Units
19029 Lime Each
19039 Lime - Extended Each
KEY FEATURES• Coil design reduces lanyard length and prevents
snag and tangle hazards• Constructed with PU covered aircraft cable for
ultimate strength and durability• Stainless steel carabiners (#304) for corrosion
resistance• Swiveling design prevents tangles and
aggressive recoil• Small – Coiled Length (16.5 cm), Extended
Length (127cm)• Small – Max safe capacity (0.9kg)• Medium – Coiled Length (18cm), Extended
Length (129cm)• Medium – Max safe capacity (2.26 kg)
Part No. Description Units
19130 (S) Lime - 0.9Kg Each
19131 (M) Orange - 2.26Kg Each
PACK OPTIONS
6 per Case
PACK OPTIONS
6 per Case
NOW WITH SWIVEL!
39 pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
ERGODYNE® SQUIDS® 3102, 3102EXT DETACHABLE SINGLE CARABINER
ERGODYNE® SQUIDS® 3104 DETACHABLE DUAL LOOP
ERGODYNE® SQUIDS® 3108 LOCKING SINGLE CARABINER
Tool Lanyard - Heavy-duty, Self Locking Carabiner: Carabiner self-locks to worker or anchor for added security. Shorter length helps prevent tools from hitting the deck.
KEY FEATURES• Stretch cord surrounded by tubular nylon
webbing• Lock stitching at both ends for extra security• Heavy-duty (500kgf) self-locking carabiner• Adjustable barrel lock for tool attachment• Maximum safe working capacity: 4.6 kg• Standard: 71cm - 89cm• 6 Per Case
Part No. Description Units
19008 Lime Each
Non-conductive and non-marring. Dual loop, interchangeable design eliminates all metal from lanyard. Great for working on or around sensitive surfaces or electrical applications.
KEY FEATURES• Stretch cord surrounded by tubular nylon
webbing• Lock stitching at both ends for extra security• Truly non-conductive with dual loop design• Perfect for scratch and damage sensitive surface
work as non-marring option• Adjustable barrel lock for tool attachment• Modular quick connecting buckle for exchanging
multiple tools• Maximum safe working capacity: 2.26 kg• Standard 89cm-107cm
Part No. Description Units
19104 Lime Each
Tool Lanyard - Detachable/Single Carabiner: Tethers tools to help worker prevent injury, damage and lost productivity from dropped tools. Compatible with #3103 Lanyard Loop.
KEY FEATURES• Stretch cord surrounded by tubular nylon
webbing• Lock stitching at both ends for extra security• Aluminium carabiner• Adjustable barrel lock for tool attachment• Quick connect buckle• Compatible with 3103: Detachable Lanyard
Loops• Maximum safe working capacity: 2.26 kg• Standard 89cm-107cm • Extended 107cm-137cm• 6 Per Case
Part No. Description Units
19063 Lime Each
19073 Lime-Extended Each
PACK OPTIONS
6 per Case
PACK OPTIONS
6 per Case
PACK OPTIONS
6 per Case
40pry
me.n
et.
au
PR
YM
E P
RIC
E L
IST
- A
US
TR
ALIA
40pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
ERGODYNE® SQUIDS® 3155 CLAMP HARD HAT LANYARD
ERGODYNE® SQUIDS® 3111, 3111EXT STAINLESS DUAL CARABINER
ERGODYNE® SQUIDS® 3311 TWIN LEG STAINLESS TRIPLE CARABINER
KEY FEATURES• Stretch cord surrounded by tubular nylon
webbing• Lock stitching at both ends for extra
security• Twin leg for connecting multiple tools or
having 100% tie-off of single tool• Stainless steel carabiners (#304) for
corrosion resistance• Maximum safe working capacity: 6.8 kg• Captive eye carabiner with screwgate for
locking connection• Standard 89cm-107cm• 6 Per Case
Twin Leg Triple Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments. Dual leg for multipleconnections.
Part No. Description Units
19083 Lime Each
KEY FEATURES• Stretch cord surrounded by tubular nylon
webbing• Lock stitching at both ends for extra security• Stainless steel carabiners for corrosion resistance• Screwgate on carabiner for locking connection• Maximum safe working capacity: 6.8 kg• Standard 89cm-107cm• Extended 107cm-137cm• 6 Per Case
Stainless Steel Screw Gate Tool Lanyard - Dual Carabiner: Stainless steel carabiners with locking screw gates for a sure connection in more corrosive environments.
Part No. Description Units
19027 Lime Each
19037 Lime - Extended Each
Clamp Hard Hat Lanyard: Easily and comfortably secures a hard hat to a worker to prevent the item from falling.
KEY FEATURES• Comfortably attaches to hard hats and other headwear• Easy release clamp attaches securely to just about
anything• Comfortable high stretch elastic material• Hi-Vis Lime• 6 Per Case
Part No. Description Units
19155 Lime Each
PACK OPTIONS
6 per Case
PACK OPTIONS
6 per Case
PACK OPTIONS
6 per Case
41 pry
me.n
et.
au
PR
YM
E P
RIC
E L
IST
- A
US
TR
ALIA
41 pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
NE
RG
ON
OM
ICS
& S
AF
ET
Y P
RO
TE
CT
ION
ERGODYNE® SQUIDS® 3158 COLIED HARD HAT LANYARD WITH CLAMP
Coil Hard Hat Lanyard with Clamp: Easily and comfortably secures a hard hat to a worker to prevent the item from falling. Coil design reduces lanyard length and prevents snag and tangle hazards.
KEY FEATURES• Coil design reduces lanyard length and prevents
snag and tangle hazards• Easy release clamp attaches securely to just
about anything• Easy release clamp attaches securely to just
about anything• Maximum safe working capacity: 2 lbs. (0.9 kg)• Third party tested using a 2:1 safety factor
Part No. Description Units
19159 Lime Each
PACK OPTIONS
6 per Case
Tethers hard hats to help workers prevent injury, damage and
lost productivity from dropped objects. Coiled lanyards provide
secure connections reduced length and help avoid tangling and snagging while performing
jobs.
WATCH THE VIDEO
http://bit.ly/1ROuk8X
3158 COILED LANYARD
42pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
ERGODYNE® SQUIDS® 3000 RETRACTABLE DUAL CARABINER & 3001 SINGLE CARABINER W/LOOP END
ERGODYNE® SQUIDS® 3025, 3026 RETRACTABLE ACCESSORIES
Retractable tool lanyard attachments for quick exchange of multiple tools.
KEY FEATURES• Compatible with
Retractable lanyards 3000 and 3001
• Modular quick connecting buckle for exchanging multiple tools
• 6 Per Case
Part No. Description Units
19325 Compatible with 3000 Retractable Lanyards 3 Attachments Per Pack
19326 Compatible with 3001 Retractable Lanyards 3 Attachments Per Pack
3000 CARABINER
KEY FEATURES• Self-setting pawls set desired lanyard length up to 122cm• ABS thermoplastic housing for ultimate durability• Nickel-plated swivelling top ring for 360 degree rotation• Stainless steel carabiners (#304) for corrosion resistance• Technora cord for ultimate strength and durability• Modular quick connecting buckle for exchanging multiple tools• Adjustable barrel lock for tool attachment• 3000 Carabiner - Maximum safe working capacity: 0.46 kg• 3001 Loop - Maximum safe working capacity: 0.9kg• Patented design• 6 Per Case
3001 LOOP
Retractable tool lanyard with stainless steel carabiner attachment. Locks into place at desired length preventing tangles and work under tension while securing tools.
Part No. Description Units
19300 Carabiner Each
19301 Loop Each
3025 CARABINER
PACK OPTIONS
6 per Case
PACK OPTIONS
6 Packs per Case
WATCH THE VIDEO
http://bit.ly/1zmbwdn
RETRACTABLES
3026 LOOP
43 pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
ERGODYNE® ARSENAL® 5518 19-POCKET AERIAL TOOL POUCH - LOOP DESIGN
ERGODYNE® ARSENAL® 5516 16-POCKET AERIAL TOOL POUCH
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
KEY FEATURES• 1680D Ballistic Nylon• 16 pockets for tools and fasteners• Top cover flap with buckle closure • Three nickel-plated D-rings for tool lanyard
attachment• Patented Storm Drains™• Abrasion-resistant PVC-reinforced pouch bases• Maximum safe working capacity: 15 kg
Part No. Description Units
13640 Grey Each
KEY FEATURES• 1680D Ballistic Nylon• Top cover flap with hook and loop closure• Four Nickel-plated D-rings for tool lanyard
attachment• Patented Storm Drains™• Abrasion-resistant PVC-reinforced pouch bases• Maximum safe working capacity: 15 kg
Aerial Tool Pouch/Loop Design: Easily attaches to any belt while keeping tools and fasteners secure.
Part No. Description Units
13642 Grey Each
PACK OPTIONS
10 per Case
PACK OPTIONS
10 per Case
ERGODYNE® ARSENAL® 5550, 5555 3” & 5” TOOL BELTS
KEY FEATURES• Thick, vented foam padding for comfort• Nickel-plated 2” double tongue metal roller buckle• Nickel-plated grommets set firmly for durability• Nickel-plated suspender anchors• 3” & 5” options
Part No. Description Units
13653 Black L 3” Each
13654 Black XL 3” Each
13655 Black 2XL 3” Each
13656 Black M 5” Each
13657 Black L 5” Each
13658 Black XL 5” Each
13659 Black 2XL 5” Each
Comfortable, padded tool belt for easy rig support.
44pry
me.n
et.
au
PR
YM
E P
RIC
E L
IST
- A
US
TR
ALIA
ERGODYNE® SQUIDS® 3175 ACCESSORY ANCHOR
ERGODYNE® ARSENAL® 5740T LEATHER BOTTOMBUCKET-SWIVEL WITH TOP
Tool Lanyard - Heavy-duty, Self Locking Carabiner: Carabiner self-locks to worker or anchor for added security. Shorter length helps prevent tools from hitting the deck.
KEY FEATURES• Heavy-duty 45mm Tetoron webbing
strap• Nickel-plated iron D-Ring• Black 840D Nylon sleeve material• Heavy-gauge, contrasting color stitching• Maximum safe working capacity: 181 kg• Not for climbing or fall arrest• 6 Per Case
Part No. Description Units
19175 Lime Each
44pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
KEY FEATURES• Canvas• Leather reinforced base• Moulded plastic top ring• Interior pocket• Heavy-gauge nylon stitching• Nickel-plated swivel clip• PP rope handle• Maximum safe working capacity: 68 kg• Diameter 32cm, height 43cm• Patented safety top included
Part No. Description Units
14540 White Each
PACK OPTIONS
6 per Case
Model Diameter (cm) Height (cm) Litres Interior Pockets Max Working
5740 32 43 34.2 1 68kg
5742 25 71 36.0 2 56kgs
5746 32 33 30.2 15 34kgs
1.
2. 3.
WHAT TO DO...STEP SELECT HOIST BUCKETS, ACCESSORY ANCHOR & TOOL BELTS
SELECT HOIST BUCKETS1
Leather Bottom Bucket w/ Snap: High wall, heavy duty bucket for strength and durability. Included detachable safety top.
SELECT TOOL BELT & BAG2 SELECT ACCESSORY ANCHORS3
Model Length (cm) Max Working KG
3175 60 181
Model 5516 5518
Pockets 16 19
D-rings 3 4
Select the 5728 bolt bag for
small parts
Select hoist buckets by identifying heavy equipment, parts, debris, materials required to be secured and/or hoisted. Select tool belt & bag for smaller items carried by the worker. Select accessory anchors to create attachment points .
PACK OPTIONS
6 per Case
LIFT BUCKET TESTING REPORThttp://bit.ly/1KlBWMh
45 pry
me.n
et.
auPart No. Description Units
19175 Lime Each
ERGODYNE® ARSENAL® 5742T TALL LEATHER BOTTOM BUCKET-SWIVEL WITH TOP
ERGODYNE® ARSENAL® 5728 TALL SAFETY BOLT BAG
ERGODYNE® ARSENAL® 5746 TAPERED PLASTIC BOTTOM BUCKET-SWIVEL
KEY FEATURES• Canvas• Moulded plastic base• Moulded plastic top ring• 15 interior pockets• Heavy-gauge nylon stitching• Nickel-plated swivel clip• PP rope handle• Maximum safe working capacity: 34kg• Wide mouth for easy loading• Diameter 32cm, height 33cm
Part No. Description Units
14446 White Each
Tapered Plastic Bottom Bucket: Wide top for easy access to bucket contents. Rope Handle
Tall Safety Bolt Bag with Loop Design: Wide body and one-handed cinch-up top for keeping gear safe and secure.
KEY FEATURES• Canvas• Patented one-handed closure for safety and security• Nickel-plated rivets• 6- and 12-ply nylon stitching• Patented nickel-plated storm drain• 2 Exterior tool loops• Maximum safe working capacity: 12 Kg• 25cm x 13cm x 33cm
Part No. Description Units
14428 White Each
Tall Leather Bottom Bucket: High wall, heavy duty bucket. Tall design holds longer equipment. Rope handle with swivel snap. Safety top included.
KEY FEATURES• Canvas• Leather reinforced base• Moulded plastic top ring• PP rope handle• 2 interior pockets for
organization• Nickel-plated swivel clip
• Heavy-gauge nylon stitching
• Maximum safe working capacity: 56 kg
• Diameter 25cm, height 71cm
• Patented safety top included
Part No. Description Units
14542 White Each
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
Model Length (cm) Max Working KG
3175 60 181
PACK OPTIONS
6 per Case
WATCH THE VIDEO
http://bit.ly/1tiNUnj
BOLT BAG
PACK OPTIONS
6 per Case
PACK OPTIONS
6 per Case
ERGODYNE® ARSENAL® 5528 5538 TOPPED PARTS POUCHES
46pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
5938 TARPAULIN
Topped Parts Pouch has a hands-free, self-closing trap door closure that prevents small parts, hardware, and tools from falling when working at heights.
KEY FEATURES• Waterproof tarpaulin material / 20 oz. water resistant
canvas• Trap door closure for safety and security• Patented nickel-plated storm drain• 2 exterior nickel-plated D-rings for tool landyard
attachment• 2 exterior tool loops• Maximum safe working capacity: 20 lbs. (9.0 kg)• 7.5”L x 7.5”W x 12”H (19cm x 19cm x 30cm)
Part No. Description Units
13628 Black Canvas Each
13638 Orange Tarpaulin Each
PACK OPTIONS
6 per Case
WATCH THE VIDEO
http://bit.ly/1Jmvne6
PARTS POUCHES
5928 CANVAS
ERGODYNE SQUIDS 3400MD METAL DETECTABLE GRABBERS
47 pry
me.n
et.
au
PR
YM
E P
RIC
E L
IST
- A
US
TR
ALIA
ERGODYNE® ARSENAL® 5920 5925 MAGNETIC TRAY ORGANISERS
47 pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
5920
5925
Part No. Description Units
13628 Black Canvas Each
13638 Orange Tarpaulin Each
Small parts trays are convenient for controlling and organizing screws, nuts, bolts, drill bits and other ferromagnetic objects.
KEY FEATURES• Corrosion resistant, durable stainless steel #430• Trays keep small ferromagnetic components at any
angle• Magnetic on base for attachment to tool box, tower or
other structure• 5.5” x 9.5”x 1.1” (14cm x 24cm x 3cm) - Rectangle• Diameter 6”, Depth 1.1” (14cm x 3cm) - Round
Part No. Description Units
14920 Rectangle Each
14925 Round Compact Each
PACK OPTIONS
6 per Case
These Grabbers not only help prevent dropped objects, they also signal metal detectors in food processing to prevent them from becoming harmful foreign objects themselves. The patented Grabbers keep your gloves, rags, keys and whatever else always seems to become a mysteriously lost object close at hand. The versatile dual clip version can be used as one unit or detached, clipped to d-rings and used as two separate pieces.
WATCH THE VIDEO
http://bit.ly/1NuFhLq
MAGNETIC TRAYS
KEY FEATURES• Clips to clothing, belts, tool belts, and D-rings• Detachable, usable with ‘biners, D-rings, etc.• Metal detectable material alerts staff if product has
become a foreign object• Impregnated with metallic powder making entire
product detectable• Deep blue color signals metal detectability• Breakaway feature, Patented Design
Part No. Description Units
19132 Dark Blue Each
PACK OPTIONS
6 per Case
48pry
me.n
et.
au
PR
YM
E P
RIC
E L
IST
- A
US
TR
ALIA
ERGODYNE® SQUIDS® 3510, 3530, 3540 TIE HOOK
ERGODYNE® SQUIDS® 3400 GRABBER
Part No. Description Units
19112 Black Each
19117 Blue Each
19118 Hi-Vis Orange Each
19119 Hi-Vis Lime Each
Grabber: Keep gloves and other items handy. Clips to almost anything. Patented.
KEY FEATURES• Clips to clothing, belts, tool belts, and D-rings• Detachable, usable with ‘beeners, D-rings, etc.• Breakaway feature• Dielectric / non-conductive material• Durable, ultra-resilient acetal copolymer• Patented design• 6 Per case
48pry
me.n
et.
au
ER
GO
NO
MIC
S &
SA
FE
TY
PR
OT
EC
TIO
N
3510 35403530
Part No. Description Recommended Load Limit Units
33102 Small Hook 30cm 10kg Each
33103 Small Hook 40cm 10kg Each
33104 Small Hook 50cm 10kg Each
33302 Large Hook 30cm 10kg Each
33303 Large Hook 40cm 10kg Each
33304 Large Hook 50cm 10kg Each
33402 Large Locking Hook 30cm 20kg Each
33403 Large Locking Hook 40cm 20kg Each
33404 Large Locking Hook 50cm 20kg Each
KEY FEATURES• Reusable sliding belt lock
mechanism• High tensile strength,
weather resistant Nylon 66
• Hi vis orange color• Excellent resistance to oil,
salt, solvents, and alkali• Temp range: -40°C - 80°C• Patented design• 6 Per case
Tie Hook: Super duty, reusable tie hook for organizing and cinching hoses, cords, pipe and almost anything else.
PACK OPTIONS
300 Per Shipper
PACK OPTIONS
6 per Case
WATCH THE VIDEO
http://bit.ly/1DcQyez
TIE HOOKS