Small dewatering and sludge pumpsSludge pumps made of stainless steel, Inox Our sludge pumps in...
Transcript of Small dewatering and sludge pumpsSludge pumps made of stainless steel, Inox Our sludge pumps in...
-
Small dewatering and sludge pumps
These small dewatering and sludge pumps are small, easy to carry, yet still intended for professional use. They are frequently used in construction and rental applications, flood relief in basements and other applications that require lightweight pumps. The sludge pump Solid has set a new standard for lightweight sludge pumps and is appreciated all over the world. It can pump solids in suspension up to thesizeof1.5”(38mm).
22
Small dewatering and sludge pumps
-
23
Small dewatering and sludge pumps
-
Small dewatering and sludge pumps
mICRo
Technical data 1-ph
Discharge connection 2”
Rated output 0.45kW(0.6HP)
Max power consumption 0.65 kW
Shaft speed 3300RPM
Rated current at 115V 5.5 A
Rated current at 230 V 2.9 A
24
a:400mm(15.7”)b: ∅185mm(7.3”)C:5x11mm(0.2x0.4”)Weight:10kg(22lbs)
A
B
C
15
0
0.10.20.30.4
0.60.5
0
5
10
40
25
20
35
30
0
2
4
12
10
6
8
(m) (ft)
P (kW)0.7
0 2010 30 40 6050
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
H
l/s
70 USgpm
Q
Specifications can be changed without notice.
-
Small dewatering and sludge pumps
maCRo
Technical data 1-ph
Discharge connection 2”
Rated output 0.82kW(1.1HP)
Max power consumption 1.1 kW
Shaft speed 3400RPM
Rated current at 115V 9.8 A
Rated current at 230 V 4.8 A
25
a:430mm(17.0”)b: ∅185mm(7.3”)C:5x11mm(0.2x0.4”)Weight:12.5kg(28lbs)
A
B
C
30
0
0.20.40.60.81.0
0
10
20
60
50
40
0
2
4
18
10
12
14
16
6
8
(m) (ft)
P (kW)1.2
0 20 8040 60
0 1 2 3 4 5 6
H
l/s
100 USgpm
Q
Specifications can be changed without notice.
-
SoLId
Technical data 1-ph
Discharge connection 2”
Rated output 0.82kW(1.1HP)
Max power consumption 1.1 kW
Shaft speed 3400RPM
Rated current at 115V 9.8 A
Rated current at 230 V 4.8 A
Small dewatering and sludge pumps
26
a:510mm(20”)b: ∅200mm(8”)C:280mm(11”)d: ∅38mm(1.5”)Weight:15kg(33lbs)
BC
A
D
15
0
0.20.40.60.81.0
0
5
10
40
25
20
35
30
0
2
4
12
10
6
8
(m) (ft)
P (kW)1.2
0 20 1008040 60
0 1 2 3 4 5 76
H
l/s
120 USgpm
Q
Specifications can be changed without notice.
-
Small dewatering and sludge pumps
27
materialPump topStainless steel/reinforced polymer
● ● ●
diffuser (drainage)Polyurethanewearparts ● ●Pump housing (sludge)Polyurethanewearparts ●outer casingStainless steel ● ● ●Stator housingStainless steel ● ● ●motor shaftStainless steel ● ● ●upper sealCarbon/aluminium oxide ● ● ●Lower sealSilicon carbide/Silicon carbide ● ● ●ImpellerPolyurethane ● ● ●Screws and nutsStainless steel ● ● ●
mic
ro
mac
ro
Solid
materials in small dewatering and sludge pumps
Specifications can be changed without notice.
-
dewatering pumps made of stainless steel, Inox
These pumps are designed to meet the tough requirements from mines, construction sites, landfill sites and other applications that deal with corrosive water. One application is in mines where the water becomes caustic and destroys conventional pumps in a matter of days. The pumps may also be used in applications where saltwater is pumped, like ship-yards, fish farms, construction works in harbors and offshore projects. All INOXpumpscanbeequippedwithzincanodesforextraprotection.
28
dewatering pumps made of stainless steel, Inox
-
29
dewatering pumps made of stainless steel, Inox
-
dewatering pumps made of stainless steel, Inox
Technical data
Discharge connection 3”
Rated output 2.3kW(3.1HP)
Max power consumption 2.9 kW
Shaft speed 3320RPM
Rated current at 460V 4.2 A
Rated current at 575V 3.3 A
30
a:535mm(21”)b: ∅240mm(9.5”)C:295mm(11”)d: ∅7.5mm(0.3”)Weight:44kg(90lbs)
A
D
C
B
mIneTTeInox
30
0
0.51.01.52.02.5
0
10
20
60
50
40
0
18
15
10
5
(m) (ft)
P (kW)3.0
0 50 100 150 200 250
0 5 10 15 19 l/s
300 USgpm
Q
H
Specifications can be changed without notice.
-
dewatering pumps made of stainless steel, Inox
majoR Inox
Technical data n h
Discharge connection 4” 3”
Rated output 6.7kW(9.0HP) 6.7kW(9.0HP)
Max power consumption 7.6 kW 7.6 kW
Shaft speed 3460RPM 3460RPM
Rated current at 460 V 11 A 11 A
Rated current at 575 V 8.6 A 8.6 A
31
a:665mm(26”)b: ∅280mm(11”)C:330mm(13”)d: ∅8.5mm(0.3”)Weight:65kg(143lbs)
A
D
B
C
60
0
123456
0
20
40
160
80
100
120
140
0
10
49
20
40
30
(m) (ft)
P (kW)7
0 100 200 300 400 500 600
0 10 20 30 40
H
44 l/s
700 USgpm
Q
H
H
N
N
Specifications can be changed without notice.
-
Technical data n h
Discharge connection 4” 3”
Rated output 9.7kW(13HP) 9.7kW(13HP)
Max power consumption 11 kW 11 kW
Shaft speed 3460RPM 3460RPM
Rated current at 460 V 15 A 15 A
Rated current at 575 V 12 A 12 A
32
a:720mm(28”)b: ∅280mm(11”)C:330mm(13”)d: ∅8.5mm(0.3”)Weight:77kg/170lbs(N),81kg/179lbs(H)
A
C
B
D
dewatering pumps made of stainless steel, Inox
150
0
2468
10
0
50
100
250
200
0
10
76
20
60
70
50
40
30
(m) (ft)
P (kW)12
0 200 400 600 800 1000
0 20 40 6010 30 50 70
H
l/s
1200 USgpm
Q
H
N
H N
maSTeRInox
Specifications can be changed without notice.
-
33
materialupper sealCarbon - silicon carbide ● ● ●Lower sealSilicon carbide - silicon carbide ● ● ●Casted partsStainless steel (EN10283-1.14412)
● ● ●
outer casingStainless steel (EN10088-3-1.14436)
● ● ●
motor shaftStainless steel (EN10088-3-1.14460)
● ● ●
ImpellerStainless steel (EN10283-1.14412)
● ● ●
Screws and nutsStainlesssteel(A4) ● ● ●o-ringsViton rubber ● ● ●diffusersNitrile rubber ● ● ●
min
ette
In
ox
maj
or
Inox
mas
ter
Inox
materials in drainage pumps made of stainless steel
dewatering pumps made of stainless steel, Inox
Specifications can be changed without notice.
-
Sludge pumps made of stainless steel, Inox
Our sludge pumps in stainless steel are used for pumping corrosive fluids withsolidsinharshenvironments.Thesolidscanbeuptothesizeof3.1”(50mm).Thesepumpsaredesignedtomeetthetoughrequirementsfrom mines, construction sites, landfill sites and other applications that deal with corrosive water. One application is in mines where the water becomes caustic and destroys conventional pumps in a matter of days. The pumps may also be used in applications where saltwater is pumped, like shipyards, fish farms, construction works in harbors and offshore projects.AllINOXpumpscanbeequippedwithzincanodesforextraprotection.
34
Sludge pumps made of stainless steel, Inox
-
35
Sludge pumps made of stainless steel, Inox
-
Sludge pumps made of stainless steel, Inox
Technical data
Rated output 2.3kW(3.1HP)
Max power consumption 2.9 kW
Shaft speed 3320RPM
Rated current at 460V 4.2 A
Rated current at 575V 3.4 A
36
a:645mm(21”)b:375mm(9.5”)C: ∅50mm(2”)Weight:48kg(72lbs)
SaLVadoRInox
30
0
0.51.01.52.02.5
0
10
20
50
40
0
2
15
4
12
14
10
8
6
(m) (ft)
P (kW)3.0
0 50 100 150
0 42 8 106 12
H
l/s
200 USgpm
Q
A
C
B
Specifications can be changed without notice.
-
Sludge pumps made of stainless steel, Inox
SenIoR Inox
Technical data
Discharge connection 4”
Rated output 5.1kW(6.6HP)
Max power consumption 6.2 kW
Shaft speed 1670RPM
Rated current at 460V 9 A
Rated current at 575V 7.3 A
37
a:775mm(30”)b:480mm(19”)C: ∅80mm(3.1”)Weight:86kg(191lbs)
15
0
12345
0
5
10
40
20
25
35
35
0
2
4
10
12
8
6
(m) (ft)
P (kW)6
0 100 200 300 400 500
0 10 20 305 15 25 35
H
l/s
600 USgpm
Q
A
B
C
Specifications can be changed without notice.
-
Technical data
Discharge connection 3”
Rated output 6.7kW(9.0HP)
Max power consumption 7.6 kW
Shaft speed 3455RPM
Rated current at 460 V 11 A
Rated current at 575 V 8.6 A
Sludge pumps made of stainless steel, Inox
38
a:775mm(30”)b:480mm(19”)C: ∅ 46 mm Weight:86kg(191lbs)
60
0
1234567
0
20
40
100
80
0
10
20
30
5
15
25
(m) (ft)
P (kW)8
0 50 100 150 200
0 2 4 6 8 10 12 14
H
16 l/s
250 USgpm
Q
SandYInox
A
B
C
Specifications can be changed without notice.
-
Sludge pumps made of stainless steel, Inox
39
materials in sludge pumps made of stainless steel
materialupper sealCarbon - silicon carbide ● ● ●Lower sealSilicon carbide - silicon carbide ● ● ●Casted partsStainless steel (EN10283-1.14412)
● ● ●
outer casingStainless steel (EN10088-3-1.14436)
● ● ●
motor shaftStainless steel (EN10088-3-1.14460)
● ● ●
ImpellerStainless steel (EN10283-1.14412)
● ● ●
Screws and nutsStainlesssteel(A4) ● ● ●o-ringsViton rubber ● ● ●Pump housingNitrile rubber ● ● ●
Salv
ador
In
ox
Seni
or
Inox
Sand
y In
ox
Specifications can be changed without notice.
-
Slurry pumps, bRaVo
Grindex slurry pumps are designed for use in quarries, mines, dredging, cleaning of settling ponds and other abrasive other industries that require pumps with very high durability. Each part of the BRAVO pump is designed for maximum endurance and reliability–anabsolutemustwhenpumpingslurry.Wear is reduced by using NiHard 4 for all hydraulic components. NiHard 4 is a nickel alloy and one of the hardest materials available today. All BRAVO pumps can handle liquids with pH values from 4 up to 10.
40
Slurry pumps, bRaVo
-
41 41
Slurry pumps, bRaVo
bRaVo 20
Technical data
Discharge connection 4”
Rated output 4.0kW(5.4HP)
Max power consumption 5.1 kW
Shaft speed 1750RPM
Rated current at 460V 8.7 A
Rated current at 575V 7.0 A
Throughlet with/without agitator 30/80mm(1¼”/3”)
a:850(33½”)b: ∅410(16¼”)C:713(28¼”)Weight:162kg(358lbs)
35
35
0
5
1
2
4
3
0
10
15
20
25
40
0
2
4
6
8
10
12 (m) (ft)
P (kW)5
0
0 5 10 15 20 25 30 35
100 200 300 400 500
H
38 l/s
600 USgpm
Q
A
B
C
Specifications can be changed without notice.
-
Slurry pumps, bRaVo
Technical data
Discharge connection 4”
Rated output 8.6kW(11.5HP)
Max power consumption 10.6 kW
Shaft speed 1750RPM
Rated current at 460 V 15.3 A
Rated current at 575 V 12.3 A
Throughlet with/without agitator 30/80mm(1¼”/3”)
a:850(33½”)b: ∅410(16¼”)C:713(28¼”)Weight:167mm(371”)
bRaVo 30
42
A
B
C
50
0
2
4
6
0
10
20
30
40
60
0
5
10
15
18 (m) (ft)
P (kW)8
0 200 400 600 800
0 10 20 30 40 50 60
H
l/s
1000 USgpm
Q
Specifications can be changed without notice.