Small Bone Power System - Zimmer Great Lakes
Transcript of Small Bone Power System - Zimmer Great Lakes
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
1
PneuMicro™ Small Bone Power System
Contents
PneuMicro™ Small Bone Power System
Introduction 2
High Speed Drill 3
Medium Speed Drill 3
Bur Guards 3
Sagittal Saw 4
Oscillating Saw 5
Reciprocating Saw 6
Air Hoses 7
Blade Wrench 7
Cleaning Plug/Cap 7
DISS to Schrader Adapter 7
Foot Control 7
Sterilization Cases 7
Surgical Burs
Round Burs - Carbide 8-9
Oval Burs - Carbide 9
Side Cutting Burs - Carbide 10-11
Lindemann Bur - Carbide 11
Round Fluted Burs - Stainless Steel 12
Round Fluted Burs - Finishing Fine Cut - Stainless Steel 12
Lindemann Bur - Stainless Steel 13
Osteotomy Burs - Stainless Steel 13
Shannon Bur - Stainless Steel 13
Swanson Reamers - Stainless Steel 13
Wire Pass Drills - Stainless Steel 13
Round Burs - Diamond 14-15
Round Burs - Coarse - Diamond 15
Oval Bur - Coarse - Diamond 15
Dermabraders - Diamond 16
Twist Drills 17
Saw Blades
Sagittal Saw Blades (Small Bone) 18-22
Sagittal Diamond Abraders (Small Bone) 21
Bone Graft Harvesting Sagittal Saw Blades (Small Bone) 22
Oscillating Saw Blades (Small Bone) 23-24
Crescentic Saw Blades (Small Bone) 25
Reciprocating Saw Blades (Small Bone) 26
Reciprocating Rasps (Large Bone) 27
236041 Zimmer B 7/10/06 3:14 PM Page 3
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
m
2
PneuMicro™ Small Bone Power System
The PneuMicro™ Small BonePower System offers precision withease of operation. The system canbe used for all small boneprocedures to include orthopaedic,oral, maxillofacial, podiatric andotology techniques.
The PneuMicro™ System isequipped with a high speed drill,medium speed drill, sagittal saw,oscillating saw & reciprocating saw.All handpieces are ergonomicallydesigned, balanced and compactto allow easier access andgreater visibility to the smallerworking areas.
The Brasseler PneuMicro Small
Bone Power System is specifically
designed to address two of the
most critical elements in small
bone surgery: reliable power and
reduction of surgery time.
Introduction
236041 Zimmer B 7/10/06 3:14 PM Page 4
Recommended Bur Length: 44.5mm — 69mm
Recommended Bur Length: 70mm — 94mm
Recommended Bur Length: 95mm — 112mm
The Brasseler USA™ High Speed Drillis designed for cutting, drilling, andsculpting small bone and enamel.
The Brasseler USA™ Medium Speed Drill isdesigned for small bone cutting, drilling,sculpting and intramedullary canal reaming.
Both drills accept standard 2.35mm diametershank burs (3/32" nominal).
A simple twist of the chuck mechanism loadsand locks the bur in place.
Both drills accept a wide range of diamond,carbide and stainless steel burs and drills, inmedium, long and extra long lengths.
Brasseler USA™ surgical burs are compatible withHall® bur catalog# series 5091 (Medium), 5092(Long), and 5093 (Extra-Long).
Medium Speed Drill
SPECIF ICATIONS:SPEED _ 0 to 25,000 rpm thrott le control led
TORQUE _ 6.0in/oz (4.24Ncm)
OPERATING PRESSURE_ 90 to 110 psi (6.2-7.6 bar)
High Speed Drill
SPECIF ICATIONS:SPEED _ 0 to 95,000 rpm thrott le control led
TORQUE _ 1.75in/oz (1.24Ncm)
OPERATING PRESSURE_ 90 to 110 psi (6.2-7.6 bar)
BUR GUARDSHig
h Sp
eed
Dri
ll
Med
ium
Spe
ed D
rill
PM-M10-901Medium
PM-M10-902Long
PM-M10-903Extra-Long
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
3
High Speed Drill Medium Speed Drill
Catalog Number . . . . . . PM-M09-200 PM-M10-200
Products not shownactual size.
Linvatec® and Hall® are
registered trademarks of
Linvatec Corporation.
Compatible to a Linvatec® Hall® Hose Connection
236041 Zimmer B 7/10/06 3:15 PM Page 5
SPECIF ICATIONS:SPEED
_ 0 to 18,000 cpm thrott le control led
BLADE TRAVEL
_ 4º arc
OPERATING PRESSURE
_ 90 to 110 psi (6.2-7.6 bar)
The Brasseler USA™ Sagittal Saw has the powerand precision needed for cutting precise wedgeand transverse osteotomies.
The Sagittal Saw’s light weight and compactdesign allows excellent visibility to the surgicalsite.
The special blade wrench quickly secures theblade locking screw to load and lock a widevariety of Brasseler USA™ straight and angledsaw blades.
Thickness of .010"(.25mm) thru .025"(0.6mm)saw blades can be used. These thin sawblades allow narrow osteotomies to beperformed easily.
Brasseler USA™ surgical saw blades arecompatible with Hall® sagittal saw bladecatalog# series 5053 Micro100, MicroEHandpiece, and 5023 MicroChoice® Handpiece.
Blade WrenchPM-M12-001
For use with both the Sagittal and Oscillating Saw. Included with handpiece purchase or may be purchased separately.
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
mCatalog Number . .PM-M12-200 Compatible to a Linvatec® Hall® Hose Connection
4
Sagittal Saw
Products not shownactual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:15 PM Page 6
The Brasseler USA™ Oscillating Saw providesaccurate cutting for curved and straight smallbone osteotomies in orthopaedic, oral,maxilliofacial and podiatric applications.
The Oscillating Saw has a long and narrow nosedesign which allows maximum visibility inrestricted areas.
The special blade wrench quickly secures theblade locking screw to load and lock a widevariety of Brasseler USA™ straight, angled andbent saw blades.
Thickness of .010"(.25mm) thru .025"(0.6mm)saw blades can be used.
Brasseler USA™ surgical saw blades arecompatible with Hall® oscillating saw bladecatalog# series 5053 Micro100, MicroEHandpiece, and 5023 MicroChoice® Handpiece.
SPECIF ICATIONS:SPEED
_ 0 to 22,000 cpm thrott le control led
BLADE TRAVEL
_ 7º arc
OPERATING PRESSURE
_ 90 to 110 psi (6.2-7.6 bar)
Blade WrenchPM-M12-001
For use with both the Sagittal and Oscillating Saw. Included with handpiece purchase or may be purchased separately.
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
5
Oscillating Saw
Catalog Number . . PM-M13-200 Compatible to a Linvatec® Hall® Hose Connection
Products not shownactual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:15 PM Page 7
The Brasseler USA™ Reciprocating Saw isoutstanding for transverse osteotomiesnecessary in orthopaedic, oral, maxilliofacial andpodiatric applications.
The Reciprocating Saw accepts flat saw bladesfrom .015"(.38mm) to .020"(0.50mm) thick, aswell as rasps and round shank saw blades withstandard shank diameters of .125"(3.18mm).
Brasseler USA™ surgical saw blades arecompatible with Hall® reciprocating saw bladecatalog# series 5053 Micro100 and MicroEHandpiece.
SPECIF ICATIONS:SPEED
_ 0 to 18,000 cpm thrott le control led
BLADE TRAVEL
_ .078" (2.0mm)
OPERATING PRESSURE
_ 90 to 110 psi (6.2-7.6 bar)
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
mCatalog Number . PM-M14-200 Compatible to a Linvatec® Hall® Hose Connection
6
Reciprocating Saw
Products not shownactual size.
Linvatec® and Hall® are
registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:15 PM Page 8
PM-A95-000Universal Sterilization Case (12"L x 7"W x 4"D)
KM-A95-000Universal Sterilization Case (11"L x 7"W x 1"D)
KM-A91-000Foot Control
MI-121-001DISS to Schrader Adapter
KM-A90-201Cleaning Plug/Cap compatible to a Linvatec® Hall® Connector
Air/Nitrogen Hose compatible to a Linvatec® Hall® Connector (Length: 3m/10 feet)KM-A90-200
Air/Nitrogen Hose compatible to a Linvatec® Hall® Connector (Length: 5m/15 feet)KM-A90-200-15
Blade WrenchPM-M12-001
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
7
Instrument Accessories
Catalog Number Description
Products not shownactual size.
Linvatec® and Hall® are registered
trademarks of Linvatec Corporation.
236041 Zimmer B 7/10/06 3:15 PM Page 9
Total Head NumberLength Diameter of Flutes(mm) (mm)
7310-C0107__________HALL 5092-226**
3.0 6
7009-C0109__________HALL 5092-230**
5.0 8
5104-C0170__________HALL 5091-232**
6.5 8
7009-C0110__________N/A
6.0 8
7310-C0105__________HALL 5092-224**
2.0 6
7310-C0103__________HALL 5092-222**
1.6 6
7310-C0101__________HALL 5092-220**
1.0 6
7009-C0170__________HALL 5092-232**
6.5 8
5104-C0110__________N/A
6.0 8
5104-C0109__________HALL 5091-230**
5.0 8
5104-C0108__________HALL 5091-228**
4.0 8
5104-C0107__________HALL 5091-226**
3.0 6
5104-C0106__________HALL 5091-223**
2.3 6
5104-C0105__________HALL 5091-224**
2.0 6
5104-C0104__________HALL 5091-221**
1.8 6
5104-C0103__________HALL 5091-222**
1.5 6
5104-C0101__________N/A
1.0 6
26.524-NC0105*__________HALL 5090-224**
2.0 6
26.524-NC0103*__________HALL 5090-222**
1.5 6
26.524-NC0101*__________HALL 5090-220**
1.0 6
7310-C0108__________HALL 5092-228**
4.0 8
Catalog No.___________Replaces
Round Burs - Carbide
0
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
m
8
Ø2.35mm Straight Shank
Also compatiblewith the:Linvatec Hall®
MicroChoice®
Micro100,
MicroE,
Surgitome E &
Surgairtome
Two® Systems.
* Use with a 90°
degree angle
attachment.
** Cross-
reference to
Hall® 5090/
5091/5092 - 1xx
and 2xx.
Linvatec®, Hall®, MicroChoice® and
Surgairtome Two® are registered
trademarks of Linvatec
Corporation.
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
236041 Zimmer B 7/10/06 3:15 PM Page 10
Ø2.35mm Straight ShankTotal Head Number
Length Diameter of Flutes(mm) (mm)
9565-C0905__________HALL 5093-238*
5.5 8
9565-C0901__________HALL 5093-236*
4.0 8
7009-C0905__________HALL 5092-238*
5.5 8
7009-C0901__________HALL 5092-236*
4.0 8
4803-C0905__________HALL 5091-238*
5.5 8
4803-C0901__________HALL 5091-236*
4.0 8
95 5.0 8
9565-C0108__________HALL 5093-228*
4.0 8
9565-C0153__________HALL 5093-226*
3.0 6
9565-C0105__________HALL 5093-224*
2.0 6
Catalog No.___________Replaces
Round Burs - Carbide
Oval Burs - Carbide
65-C0109__________HALL 5093-230*
95 6.5 865-C0170__________HALL 5093-232*
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
9
Also compatiblewith the:
Linvatec Hall®
MicroChoice®
Micro100,
MicroE,
Surgitome E &
Surgairtome
Two® Systems.
* Cross-reference
to Hall® 5091/
5092/5093 - 1xx
and 2xx.
Linvatec®, Hall®, MicroChoice® and
Surgairtome Two® are registered
trademarks of Linvatec Corporation.
Available 10-1-06
Available 10-1-06
®
®
®
®
®
®
®
®
®
®
®
236041 Zimmer B 7/10/06 3:15 PM Page 11
Ø2.35mm Straight ShankTotal Head Number
Length Dia. x Length of Flutes(mm) (mm)
5104-C0302__________HALL 5091-201**
1.0 x 6.0 6
25.524-NC0305*__________HALL 5090-204**
1.5 x 7.5 2
2524-NC0617*__________HALL 5090-206**
2.0 x 7.5 2
25.524-NC0609*__________HALL 5090-202**
1.5 x 10.0 2
5104-C0602__________N/A
0.9 x 5.2 6
5104-C0601__________HALL 5091-215**
0.9 x 5.2 6
4803-C0312__________HALL 5091-254**
4.0 x 10.0 12
34.524-NC0613*__________HALL 5090-203**
1.7 x 12.0 2
5104-C0604__________N/A
1.0 x 6.0 6
5104-C0303__________HALL 5091-216**
1.2 x 6.0 6
5104-C0623__________N/A
1.2 x 6.0 6
Catalog No.___________Replaces
Side Cutting Burs - Carbide
24-NC0609
5104-C0306__________HALL 5091-204**
1.5 x 7.5 6
5104-C0310__________HALL 5091-252**
2.0 x 10.0 6
5104-C0617__________HALL 5091-206**
2.0 x 7.5 6
5104-C0615__________N/A
2.1 x 4.9 6
5104-C0612__________N/A
1.8 x 4.6 6
5104-C0307__________HALL 5091-217**
1.6 x 4.3 6
5104-C0607__________HALL 5091-218**
1.6 x 4.3 6
5104-C0609__________HALL 5091-202**
1.5 x 10.0 6
5104-C0404__________HALL 5091-219**
1.2 x 4.2 6
5104-C0606__________N/A
1.2 x 4.2 6
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
m
10
Also compatiblewith the:Linvatec Hall®
MicroChoice®
Micro100,
MicroE,
Surgitome E &
Surgairtome
Two® Systems.
* Use with a 90°
degree angle
attachment.
** Cross-
reference to
Hall® 5090/
5091 - 1xx and
2xx.
Linvatec®, Hall®, MicroChoice® and
Surgairtome Two® are registered
trademarks of Linvatec
Corporation.
Tapered
Straight
Tapered
Tapered
Barrel
Tapered
Tapered - Fissure
Straight
Tapered
Straight
Tapered
Tapered - Fissure
Straight Round End
Tapered
Tapered
Straight
Tapered
Tapered
Tapered
Barrel
Straight
®
®
®
®
®
®
®
®
®
®
®
®
®
®
®
236041 Zimmer B 7/10/06 3:15 PM Page 12
5104-C1803__________N/A
1.9 x 13.0 4
Lindemann Bur - Carbide
Total Head NumberLength Dia. x Length of Flutes(mm) (mm)
7310-C0617__________HALL 5092-206*
2.0 x 7.5 6
7310-C0306__________HALL 5092-204*
1.5 x 7.5 6
7310-C0310__________HALL 5092-252*
2.0 x 10.0 8
8011-C0619__________HALL 5092-214*
2.0 x 19.0 6
7009-C0613__________HALL 5092-203*
1.7 x 12.0 6
5706-C0619__________HALL 5091-214*
2.0 x 19.0 6
Catalog No.___________Replaces
Side Cutting Burs - Carbide
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
11
Ø2.35mm Straight Shank
Also compatiblewith the:
Linvatec Hall®
MicroChoice®
Micro100,
MicroE,
Surgitome E &
Surgairtome
Two® Systems.
* Cross-reference
to Hall® 5091/
5092 - 1xx and
2xx.
Linvatec®, Hall®, MicroChoice® and
Surgairtome Two® are registered
trademarks of Linvatec Corporation.
Tapered
Tapered
Straight
Tapered
Barrel
Tapered
®
®
®
®
®
®
236041 Zimmer B 7/10/06 3:16 PM Page 13
7009-S0167* 7.0 36
7009-S0164* 4.5 34
7009-S0163* 4.0 32
7009-S0162* 3.5 28
7009-S0161* 3.1 22
7009-S0160* 2.7 22
7009-S0114* 2.3 20
7009-S0159* 1.8 20
7009-S0111* 1.0 12
Total Head NumberLength Diameter of Flutes(mm) (mm)
7009-S0125 7.0 16
7009-S0156 6.0 14
7009-S0155 5.0 12
7009-S0123 4.5 12
7009-S0120 4.0 12
7009-S0154 3.5 12
7009-S0153 3.1 10
7009-S0152 2.7 10
7009-S0115 2.3 8
7009-S0151 1.8 8
7009-S0150 1.4 8
7009-S0101 1.0 6
7009-S0149 0.8 6
7009-S0148 0.6 6
CatalogNumber Round Fluted Burs - Stainless Steel
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
m
12
Ø2.35mm Straight Shank
Also compatiblewith the:Linvatec Hall®
MicroChoice®
Micro100,
MicroE,
Surgitome E &
Surgairtome
Two® Systems.
* Finishing Fine
Cut
Linvatec®, Hall®, MicroChoice® and
Surgairtome Two® are registered
trademarks of Linvatec
Corporation.
236041 Zimmer B 7/10/06 3:16 PM Page 14
5104-S1704__________HALL 5091-249**
2.0 x 19.0 2
5104-S1703__________HALL 5091-248**
1.5 x 19.0 2
5104-S1701__________HALL 5091-247**
1.0 x 19.0 2
3701-S1704*__________HALL 5090-249**
2.0 x 19.0 2
3701-S1703*__________HALL 5090-248**
1.5 x 19.0 2
3701-S1701*__________HALL 5090-247**
1.0 x 19.0 2
6207-S1604__________HALL 5091-245**
5.0 8
6207-S1605__________HALL 5091-244**
4.0 6
6207-S1602__________HALL 5091-243**
3.0 6
5706-S1601__________HALL 5091-242**
2.0 4
Swanson Reamers - Stainless Steel
Wire Pass Drills - Stainless Steel
5104-S1501__________N/A
2.3 x 12.0 4
Shannon Bur - Stainless Steel
6708-S1802__________N/A
1.5 x 25.0 4
4803-S1101__________N/A
6.0 14
5104-S0402__________N/A
6.0 14
Osteotomy Burs - Stainless Steel
Total Head NumberLength Dia. x Length of Flutes(mm) (mm)
Catalog No.___________Replaces
Lindemann Bur - Stainless Steel
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
13
Ø2.35mm Straight Shank
Also compatiblewith the:
Linvatec Hall®
MicroChoice®
Micro100,
MicroE,
Surgitome E &
Surgairtome
Two® Systems.
* Use with a 90°
degree angle
attachment.
** Cross-
reference to
Hall® 5090/ 5091
- 1xx and 2xx.
Linvatec®, Hall®, MicroChoice® and
Surgairtome Two® are registered
trademarks of Linvatec Corporation.
®
®
®
®
®
®
®
®
®
®
236041 Zimmer B 7/10/06 3:16 PM Page 15
70 6.5 —
70 7.0 —
70 3.5 —
70 3.0 —
70 2.9 —
70 2.3 —
70 2.0 —
70 1.8 —
70 1.6 —
70 1.4 —
70 1.2 —
70 1.0 —
70 0.8 —
70 0.6 —
7310-D0133__________N/A
3.0 —
7310-D0139__________N/A
2.0 —
7009-D0138__________HALL 5092-268*
6.0 —
7009-D0141__________HALL 5092-266*
5.0 —
7009-D0135__________HALL 5092-264*
4.0 —
5104-D0139__________HALL 5091-260*
2.0 —
5104-D0133__________N/A
09-D0142__________N/A
09-D0143__________N/A
09-D0128__________N/A
09-D0144__________N/A09-D0145__________N/A
09-D0129__________N/A
09-D0146__________N/A
09-D0139__________HALL 5092-260*
09-D0140__________N/A09-D0132__________N/A
09-D0133__________HALL 5092-262*
09-D0134__________N/A
09-D0148__________N/A
09-D0147__________N/A
3.0 —
4803-D0138__________HALL 5091-268*
6.0 —
4803-D0135__________HALL 5091-264*
4.0 —
Total Head NumberLength Diameter of Flutes(mm) (mm)
Catalog No.___________Replaces
Round Burs - Diamond
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
m
14
Ø2.35mm Straight Shank
Also compatiblewith the:Linvatec Hall®
MicroChoice®
Micro100,
MicroE,
Surgitome E &
Surgairtome
Two® Systems.
* Cross-
reference to
Hall® 5091/5092
- 1xx and 2xx.
Linvatec®, Hall®, MicroChoice® and
Surgairtome Two® are registered
trademarks of Linvatec
Corporation.
®
®
®
®
®
®
®
®
®
236041 Zimmer B 7/10/06 3:16 PM Page 16
Oval Bur - Coarse - Diamond
70 4.2 —
70 7.0 —
70 6.0 —
70 5.0 —
70 4.0 —
70 3.0 —
70 2.3 —
70 0.8 —
70 0.6 —
Round Burs - Coarse - Diamond
95 2.0 —
95 3.0 —
95 4.0 —
Total Head NumberLength Diameter of Flutes(mm) (mm)
Catalog No.___________Replaces
Round Burs - Diamond
95 5.0 —
65-D0139__________HALL 5093-260*
65-D0133__________HALL 5093-262*
65-D0135__________HALL 5093-264*
65-D0141__________HALL 5093-266*
09-D0185__________HALL 5092-286*
09-D0171__________N/A
09-D0173__________N/A
09-D0184__________HALL 5092-285*
09-D0183__________HALL 5092-284*
09-D0180__________HALL 5092-283*
09-D0179__________N/A
09-D0187__________N/A
09-D0920__________N/A
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
15
Ø2.35mm Straight Shank
Also compatiblewith the:
Linvatec Hall®
MicroChoice®
Micro100,
MicroE,
Surgitome E &
Surgairtome
Two® Systems.
* Cross-reference
to Hall®
5092/5093 - 1xx
and 2xx.
Linvatec®, Hall®, MicroChoice® and
Surgairtome Two® are registered
trademarks of Linvatec Corporation.
®
®
®
®
®
®
®
®
236041 Zimmer B 7/10/06 3:16 PM Page 17
5104-D2001__________HALL 5091-083
10.0 x 15.0 —
5104-D1903__________HALL 5091-082
12.0 x 15.0 —
4803-D1902__________HALL 5091-081
7.0 x 15.0 —
4803-D1901__________HALL 5091-080
4.0 x 15.0 —
4803-D0911__________HALL 5091-270*
4.0 x 8.0 —
7009-D0911__________HALL 5092-270*
4.0 x 8.0 —
7009-D0403__________HALL 5092-274*
2.0 x 15.0 —
* Check manufacturer’s recommended bur guards and speeds for handpiece being used.
Total Head NumberLength Dia. x Length of Flutes(mm) (mm)
Catalog No.___________Replaces
Dermabraders - Diamond
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
m
16
Ø2.35mm Straight Shank
Also compatiblewith the:Linvatec Hall®
MicroChoice®
Micro100,
MicroE,
Surgitome E &
Surgairtome
Two® Systems.
* Cross-
reference to
Hall® 5091/5092
- 1xx and 2xx.
Linvatec®, Hall®, MicroChoice® and
Surgairtome Two® are registered
trademarks of Linvatec
Corporation.
®
®
®
®
®
®
®
236041 Zimmer B 7/10/06 3:16 PM Page 18
mm 1.1 63.5
in. .043 2.500
KM-B46-111Replaces: MicroAire® 8051-811
mm 1.3 63.5
in. .051 2.500
KM-B46-113Replaces: MicroAire® 8051-013
mm 1.5 63.5
in. .059 2.500
KM-B46-115Replaces: MicroAire® 8051-015
mm 2.0 63.5
in. .079 2.500
KM-B46-120Replaces: MicroAire® 8051-020
mm 2.5 76.0
in. .098 3.00
KM-B46-125Replaces: N/A
mm 2.7 76.0
in. .106 3.00
KM-B46-127Replaces: MicroAire® 8051-027
mm 3.2 76.0
in. .0125 3.00
KM-B46-132Replaces: MicroAire® 8051-032
mm 3.5 76.0
in. .138 3.00
KM-B46-135Replaces: MicroAire® 8051-035
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
17
Twist Drills
Note: For use
with the
Medium Bur
Guard PM-
M10-901
MicroAire® is a registered
trademark of MicroAire Surgical
Instruments, LLC.
Drill TotalCatalog NumberDiameter Length
236041 Zimmer B 7/10/06 3:16 PM Page 19
mm 15.0 4.5 .63 .40
in. .59 .17 .025 .015
KM-3105Replaces: N/A
mm 15.0 9.5 .63 .40
in. .59 .37 .025 .015
KM-3104
mm 41.0 14.0 .70 .40
in. 1.61 .55 .028 .015
KM-3100C
mm 25.5 9.5 .63 .40
in. 1.00 .37 .025 .015
KM-3101
mm 25.5 9.5 .70 .40
in. 1.00 .37 .028 .015
KM-3101C
mm 25.5 4.5 .56 .40
in. 1.00 .18 .022 .015
KM-3102
Replaces: Hall® 5023/5053-233*
Replaces: Hall® 5023/5053-238*
Replaces: Hall® 5023/5053-243*
Replaces: Hall® 5023/5053-239*
Replaces: N/A
Cutting Cutting Cutting MaterialCatalog NumberDepth Width Thickness Thickness
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
m
18
Sagittal Saw Blades — Small Bone
Also compatiblewith the:Linvatec Hall®
MicroChoice®
Micro100 &
MicroE Systems.
* Cross-
reference to
Hall® 5023/
5053-1xx and
2xx.
All saw blades shown
actual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:16 PM Page 20
Side View
mm 13.5 9.5 .63 .63
in. .53 .37 .025 .025
KM-3229
Side View
Replaces: Hall® 5023/5053-229*
mm 7.5 9.5 .63 .63
in. .30 .37 .025 .025
KM-3228Replaces: Hall® 5023/5053-228*
mm 34.0 6.0 .63 .40
in. 1.38 .24 .025 .015
KM-3107
mm 25.5 5.5 .70 .40
in. 1.00 .22 .028 .015
KM-3106
mm 34.0 4.0 .63 .40
in. 1.18 .16 .025 .015
KM-3108
mm 25.5 19.5 .70 .40
in. 1.00 .77 .028 .015
KM-3109C
Replaces: Hall® 5023/5053-232*
Replaces: Hall® 5023/5053-241*
Replaces: Hall® 5023/5053-242*
Replaces: Hall® 5023/5053-230*
Cutting Cutting Cutting MaterialCatalog NumberDepth Width Thickness Thickness
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
19
Sagittal Saw Blades — Small Bone
Also compatiblewith the:
Linvatec Hall®
MicroChoice®
Micro100 &
MicroE Systems.
* Cross-reference
to Hall® 5023/
5053-1xx and
2xx.
All saw blades shown
actual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:16 PM Page 21
mm 41.0 9.5 .63 .40
in. 1.61 .37 .025 .015
KM-3240Replaces: Hall® 5023/5053-240*
mm 15.5 14.0 .63 .40
in. .59 .55 .025 .015
KM-3236
Side View
Replaces: Hall® 5023/5053-236*
mm 25.5 14.0 .71 .40
in. 1.00 .55 .028 .015
KM-3237Replaces: Hall® 5023/5053-237*
mm 18.0 5.5 .97 .60
in. .71 .22 .038 .024
KM-3235
Side View
Replaces: Hall® 5023/5053-235*
mm 9.0 5.5 .97 .60
in. .37 .22 .038 .024
KM-3234
Side View
Replaces: Hall® 5023/5053-234*
mm 41.0 19.5 .70 .40
in. 1.57 .77 .028 .015
KM-3231Replaces: Hall® 5023/5053-231*
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
mCutting Cutting Cutting MaterialCatalog NumberDepth Width Thickness Thickness
20
Sagittal Saw Blades — Small Bone
Also compatiblewith the:Linvatec Hall®
MicroChoice®
Micro100 &
MicroE Systems.
* Cross-
reference to
Hall® 5023/
5053-1xx and
2xx.
All saw blades shown
actual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:16 PM Page 22
mm 25.0 3.8 6.3 0.4
in. 1.0 .15 .25 .015
KM-3055
mm 25.0 3.8 6.3 0.4
in. 1.0 .15 .25 .015
KM-3056
mm 25.0 3.8 6.3 0.4
in. 1.0 .15 .25 .015
KM-3057
Side View
Side View
Side View
Replaces: Hall® 5023/5053-055
Replaces: Hall® 5023/5053-056
Replaces: Hall® 5023/5053-057
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
21
Sagittal Diamond Abraders — Small Bone
Cutting Abrader Abrader MaterialCatalog NumberDepth Width Length Thickness
Also compatiblewith the:
Linvatec Hall®
MicroChoice®
Micro100 &
MicroE Systems.
All saw blades shown
actual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:16 PM Page 23
mm/in. 20.0/.80 9.0/.35
10 mm
12 mm
11 mm
mm/in. 20.0/.80 10.0/.39KM-3410
mm/in. 20.0/.80 11.0/.43KM-3411
mm/in. 20.0/.80 12.0/.47KM-3412
6 mm
8 mm
mm/in. 20.0/.80 6.0/.24KM-3406
mm/in. 20.0/.80 8.0/.31KM-3408
KM-3409
9 mm
��
��
��
��
��
��
��
��
��
��
��
��
Replaces: Hall® 5023-406
Replaces: Hall® 5023-408
Replaces: Hall® 5023-409
Replaces: Hall® 5023-410
Replaces: Hall® 5023-411
Replaces: Hall® 5023-412
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
mCutting GraftCatalog NumberDepth Thickness
22
Bone Graft Harvesting Sagittal Saw Blades — Small Bone
Also compatiblewith the:Linvatec Hall®
MicroChoice®
Micro100 &
MicroE Systems.
All saw blades shown
actual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:16 PM Page 24
mm 27.8 9.5 .76 .40
in. 1.10 .38 .030 .015
KM-3004C
mm 14.5 5.5 .56 .40
in. .57 .22 .022 .015
KM-3006
mm 19.0 9.5 .56 .40
in. .75 .38 .022 .015
KM-3005
mm 27.8 9.5 .56 .40
in. 1.10 .38 .022 .015
KM-3004
mm 22.2 5.5 .56 .40
in. .88 .22 .022 .015
KM-3003
mm 26.5 5.5 .56 .40
in. 1.05 .22 .022 .015
KM-3001
mm 29.6 9.5 .56 .40
in. 1.17 .38 .022 .015
KM-3002
mm 19.0 5.5 .56 .40
in. .75 .22 .022 .015
KM-3000Replaces: Hall® 5023/5053-262*
Replaces: Hall® 5023/5053-264*
Replaces: Hall® 5023/5053-269*
Replaces: N/A
Replaces: N/A
Replaces: N/A
Replaces: Hall® 5023/5053-263*
Replaces: Hall® 5023/5053-260*
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
23
Oscillating Saw Blades — Small Bone
Cutting Cutting Cutting MaterialCatalog NumberDepth Width Thickness Thickness
Also compatiblewith the:
Linvatec Hall®
MicroChoice®
Micro100 &
MicroE Systems.
* Cross-reference
to Hall® 5023/
5053-1xx and
2xx.
All saw blades shown
actual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:16 PM Page 25
mm 13.7 9.5 .63 .40
in. .54 .38 .025 .015
KM-3268
mm 29.0 9.5 .63 .40
in. 1.14 .38 .025 .015
KM-3265
mm 13.7 5.5 .63 .40
in. .54 .22 .025 .015
KM-3267
mm 13.2 9.5 .63 .40
in. .53 .38 .025 .015
KM-3261
Side View
Side View
Replaces: Hall® 5023/5053-261*
Replaces: Hall® 5023/5053-265*
Replaces: Hall® 5023/5053-267*
Replaces: N/A
mm 13.7 9.5 .63 .40
in. .54 .38 .025 .015
KM-3259
Side View
mm 11.7 9.5 .63 .40
in. .46 .38 .025 .015
KM-3258
mm 29.6 18.5 .63 .40
in. 1.05 .73 .025 .015
KM-3008
Side View
Replaces: Hall® 5023/5053-266*
Replaces: Hall® 5023/5053-258*
Replaces: Hall® 5023/5053-259*
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
mCutting Cutting Cutting MaterialCatalog NumberDepth Width Thickness Thickness
24
Oscillating Saw Blades — Small Bone
Also compatiblewith the:Linvatec Hall®
MicroChoice®
Micro100 &
MicroE Systems.
* Cross-reference
to Hall® 5023/
5053-1xx and
2xx.
All saw blades shown
actual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:16 PM Page 26
mm 12.0 9.0 0.6 0.4
in. .47 .39 .024 .015
KM-70
mm 25.5 13.5 0.6 0.4
in. 1.0 .53 .024 .015
KM-71
mm 30.0 18.0 0.6 0.4
in. 1.18 .71 .024 .015
KM-72
Replaces: Hall® 5023/5053-055
Replaces: Hall® 5023/5053-056
Replaces: Hall® 5023/5053-057
mm 32.0 13.5 0.6 0.4
in. 1.26 .53 .024 .015
KM-76Replaces: Hall® 5023/5053-076
Available 10-1-06
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
25
Oscillating Crescentic Saw Blades — Small Bone
Cutting Cutting Cutting MaterialCatalog NumberDepth Width Thickness Thickness
Also compatiblewith the:
Linvatec Hall®
Micro100 &
MicroE Systems.
Note: Notcompatible with
Linvatec Hall®
MicroChoice®
System.
All saw blades shown
actual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:16 PM Page 27
mm 38.0 7.6 .63 .40
in. 1.5 .30 .025 .015
KM-070
mm 25.4 8.0 .63 .40
in. 1.00 .32 .025 .015
KM-060Replaces: Hall® 5053-020
Replaces: Hall® 5053-021
mm 39.0 9.5 .58 .40
in. 1.54 .38 .023 .015
KM-071Replaces: N/A
mm 7.0 25.0 .89 .50
in. .28 1.00 .035 .020
KM-53
mm 8.0 25.0 .66 .40
in. .31 1.00 .026 .015
KM-54
mm 4.0 17.5 .76 .50
in. .16 .69 .030 .020
KM-51
mm 5.0 7.0 .84 .50
in. .20 .28 .033 .020
KM-50Replaces: Hall® 5053-050
Replaces: Hall® 5053-051
Replaces: Hall® 5053-053
Replaces: Hall® 5053-054
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
mCutting Cutting Cutting MaterialCatalog NumberDepth Width Thickness Thickness
26
Reciprocating Saw Blades — Small Bone
Also compatiblewith the:Linvatec Hall®
MicroChoice®
Micro100 &
MicroE Systems.
All saw blades shown
actual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
236041 Zimmer B 7/10/06 3:16 PM Page 28
mm 11.0 5.5
in. .43 .22
KM-80
mm 12.5 7.0
in. .50 .28
KM-81
mm 11.0 5.5
in. .43 .22
KM-82
Replaces: Hall® 5053-080
Replaces: Hall® 5053-081
Replaces: Hall® 5053-082
mm 12.5 7.0
in. .50 .28
KM-83Replaces: Hall® 5053-083
Brasseler U
SA
Pn
euM
icro™
Small B
one Pow
er System
27
Reciprocating Rasps — Small Bone
Cutting CuttingCatalog NumberDepth Width
Also compatiblewith the:
Linvatec Hall®
MicroChoice®
Micro100 &
MicroE Systems.
All saw blades shown
actual size.
Linvatec®, Hall® and MicroChoice®
are registered trademarks of
Linvatec Corporation.
Small, Straight Cut
Large, Straight Cut
Small, Cross Cut
Large, Cross Cut
236041 Zimmer B 7/10/06 3:16 PM Page 29
Bra
ssel
er U
SA
Pn
euM
icro
™Sm
all B
one
Pow
er S
yste
m
28
236041 Zimmer B 7/10/06 3:16 PM Page 30
Z-2817-0606
One Brasseler Boulevard � Savannah, Georgia 31419 Dover, Ohio (USA) 44622
Order/Information — 800-348-2759
Linvatec®, Hall®, MicroChoice® and Surgairtome Two® are registered trademarks of Linvatec Corporation.
MicroAire® registered trademark of MicroAire Surgical Instruments, LLC.
Brasseler USA™ and Zimmer Orthopaedic Surgical Products, Inc. are not affiliated with any of the above and makes no claim to
copyrights or trademarks which are the property of these companies.
Brasseler USA™ and PneuMicro™ are trademarks of Brasseler USA, Inc.
Distributed by:
97-2
554-
001-
00 P
rinte
d in
US
A©
2006
Zim
mer
Ort
hopa
edic
Sur
gica
l Pro
duct
s, In
c.
Manufactured by:
236041 Zimmer B 7/10/06 3:16 PM Page 32