SM-RAZOR-ART2-L / SM-RAZOR-ART2-XLavdiusa.com/wp-content/uploads/SM-RAZOR-ART2-XL_Manual.pdfFor...
Transcript of SM-RAZOR-ART2-L / SM-RAZOR-ART2-XLavdiusa.com/wp-content/uploads/SM-RAZOR-ART2-XL_Manual.pdfFor...
SM-RAZOR-ART2-L / SM-RAZOR-ART2-XLStrong™ Razor Series
Articulating Mount for Large and Extra Large Displays
INSTRUCTION MANUAL
Installation Manual
pg.3www.snapav.com Support: 866.838.5052
Package ContentsMount & Accessories
• Installationofthisproductshouldbedonebyaqualifiedprofessional.
• Donotbegininstallationbeforereviewingandunderstandingtheseinstructions.
• Ensurethemountingwallusedcansafelysupport4timesthecombinedweightofthemountandchosendisplay.
• Undernocircumstancesshouldthisproductbemountedtometalstuds.
• Themanufacturerdoesnotacceptresponsibilityforincorrectinstallation.
Warnings:
Wall Arm Assembly(x1)
Wall Bracket (x1) TV Plate (x1) Wall Bracket EndCovers
(x2)
Wire Covers (x4)
Specifications:
SM-RAZOR-ART2-L 100lbs.
SM-RAZOR-ART2-XL 100lbs.
SM-RAZOR-ART2-L: UptoVESA600x400
SM-RAZOR-ART2-XL: UptoVESA800x600
Note:MaxVESA800x600requiresuseof(AF)ExtensionBrackets.
Tools Required:• PowerDrill
• 1/4”DrillBit
• PhillipsHeadScrewDriver
• Level
• 1/2”(13mm)SocketWrench
• StudFinder
• ZipTies(ForWireManagement)
• 5/16”DrillBit(ConcreteMountingOnly)
• Hammer(ConcreteMountingOnly)
VESAPatterns:
MaximumLoad:
CAUTION: Thiswallmountisintendedforuseonlywiththemaximumweightof100lbs/45.35kg.Usewithheavierthanthemaximumweightindicatedmayresultininstabilitycausingpossibleinjury.
pg.4
Installation Manual
© 2012 Strong
Hardware
(AB)S4AllenKey(1)
(AH)LatchingClip(1)
(AF)Extensionbrackets(4)
(AC)S5AllenKey(1)
(AI)M5x8bolts(2) (AG)machinescrew,M5x6(16)
(AD)S10SocketWrench(1)
(AE)S8SocketWrench(1)
Bag1
Bag2
Bag3
Bag4
Bag5 Bag6(XLOnly)
(A)Black,Philipsdrivemachinescrew,
M4x10(4)
(B)Black,Philipsdrivemachinescrew,
M4x20(4)
(C)Black,Philipsdrivemachinescrew,
M4x30(4)
(D)Black,Philipsdrivemachinescrew,
M4x40(4)
(E)Black,Philipsdrivemachinescrew,
M5x10(4)
(F)Black,Philipsdrivemachinescrew,
M5x20(4)
(G)Black,Philipsdrivemachinescrew,
M5x30(4)
(H)Black,Philipsdrivemachinescrew,
M5x40(4)
(I)Black,Philipsdrivemachinescrew,
M6x10(4)
(J)Black,Philipsdrivemachinescrew,
M6x20(4)
(K)Black,Philipsdrivemachinescrew,
M6x30(4)
(L)Black,Philipsdrivemachinescrew,
M6x40(4)
(M)Black,Philipsdrivemachinescrew,
M8x10(4)
(N)Black,Philipsdrivemachinescrew,
M8x20(4)
(O)Black,Philipsdrivemachinescrew,
M8x30(4)
(P)Black,Philipsdrivemachinescrew,
M8x40(4)
(Q)OD12xID5.5x5BlackNylonSpacer(8)
(R)OD15xID8.5x5BlackNylonSpacer(8)
(S)Black,M5washer,M5x12x1
(16)
(T)Black,M8washer,M8x19x2
(8)
(V)Washer9.5x21x2(4)
(W)ConcreteAnchors10x80(4)
(U)M8x90LagBolt(4)
(X)Washer,M6,6.5*18*2(2)
(Y)Black,M6Locknuts(2)
(Z)Black,M6x12CounterSunkHexHeadScrew(2)
(AA)BottomMountingBlock
(1)
Installation Manual
pg.5www.snapav.com Support: 866.838.5052
InstallationStep 1. Pre-Drill Wall for Mounting
A. For Mounting on a Stud WallA-1. PlacetheWallPlateonthewallinthedesiredpositionforthedisplay.
A-2. Markthemountingholelocationsoverthewallstuds.
A-3. Pre-drill4holesintotwowoodstudsusinga1/4”drillbit.Besuretodrillintothecenterofthestudsatleast3-1/2”deep.Theuseofastudfinderishighlyrecommended.
Step 2. Mount the Wall Bracket AssemblyA-1. Insert2LagBolts(U)with2LagBoltWashers(V)intothetopholesoranchors(W)inthe
wall,andlooselytighten,allowingforclearancefortheWallPlate.(Figure3)
A-2. Withtheorientationmarking(UpArrow)ontop,placetheWallPlateonthewall,aligningitwiththetopLagBoltsinthewall.
A-3. Slidethewallplateintoposition,andinsert2LagBolts(U)with2LagBoltWashers(V)intothebottom2holesoranchors(W).(Figure4)
A-4. Tightenallthebolts.
B-1. PlacetheWallPlateonthewallinthedesired
positionforthedisplay.
B-2. Markthelocationoftheholesonthewall.
B-3. Pre-drillholesintoconcreteusing5/16”drillbitstoadepthof31/2”.InsertconcreteWallAnchors(W)andtapinwithhammer,ifnecessary(Figures1&2).
B. For Mounting on a Concrete Wall• WARNING: When installing wall bracket on cinder block:
Verify first that you have a minimum of 1-3/8” of concrete thickness to be used for the concrete anchors.
• Donotdrillintomortarjoints!Besuretomountinasolidpartoftheblock,generally1”minimumfromthesideoftheblock.
• CinderblockmustmeetASTMC-90specifications.
• Itissuggestedthatastandardelectricdrillonslowsettingisusedtodrilltheholeinsteadofahammerdrilltoavoidbreakingoutthebackoftheholewhenenteringavoidorcavity.
• Concretemustbe2000psidensityminimum.Lighterdensityconcretemaynotholdanchors.
• Makesurethatthesupportingsurfacewillsafelysupportthecombinedloadoftheequipmentandallattachedhardwareandcomponents.
Drill holes andinsert anchors.
Place wall armassembly plate
over anchor andsecure with
bolt.
Tighten allbolts.
Wall Arm
ConcreteWall
Flange Bolt
Figure 3
Figure 1
Correct
concreteconcrete
plaster/drywall
plaster/drywall
Incorrect
Cu
taw
ay
Vie
w
Figure 2
Figure 2
WARNING: Tighten bolts so that wall plate is firmly attached, but do not over tighten. Over tightening can damage the bolts, greatly reducing their holding strength.
Figure 3
Lag Bolts (U)
Lag Bolt Washers (V)
Figure 4
Orientation Marking(Up Arrow)
Lag Bolts (U)
Lag Bolt Washers (V)
pg.6
Installation Manual
© 2012 Strong
Step 3. Attach the Arm Assembly to the Wall Plate
A. LowertheArmAssemblyontotheWallPlatealigningwiththebottomrail.(Figure5)
B. AligntheArmAssemblywiththetoprail,andslidetheArmAssemblyintopositionwhileloweringtheMountingBlockTop.(Figure5)
C. SlidetheArmAssemblyLefttoRightuntilitisplacedinthelocationonthewallmount,usuallycenteredontheWallPlate.
D. SecurethetopoftheArmAssemblybytighteningthe2RoundHeadHexScrewsusingtheS4AllenKey(AB).(Figure6)
E. SecurethebottomoftheArmAssemblybyplacingtheBottomMountingBlock(AA)infrontofthebottomrailontheplate,andtightenthe2CounterSunkHexScrews(Z)usingtheS4AllenKey(AB).(Figure7)
F. OncetheArmAssemblyissecured,theWallBracketEndCoverscanbeinstalledtothetopandbottomofthewallBracket.
Figure 5
Step 3A
Step 3B
MountingBlock Top
(Pull Down to fit onto rail)
Figure 6
AdjustmentScrews
Bottom MountingBlock (AA)
Recessed HeadHex Screws (Z)
Figure 7
Installation Manual
pg.7www.snapav.com Support: 866.838.5052
Step 4. Attach TV Plate to DisplayA. Withtheorientationmarking(UpArrow)towards
thetopoftheTV,placetheTVPlateonthebackofdisplayaligningtheuprightbarswiththemountingholesonthedisplay.(Figure8A)
B. Iftheholesdonotalign:
B-1. Removethescrewsfromtheverticalbars,andslidethebarsuntiltheyalignwiththemountingholesonthedisplay.Theverticalbarscontainindicatorsforcommonpatternsthatcanbeusedtoeasilysetthespacingofthehorizontalbars.
Note: ThebackofthehorizontalbarshavemarkingsthatfollowVESApatternhorizontalincrementsfrom300to800.(Figure8B)
B-2. Re-Insertthescrewsremovedinstep4B-1,andtighten.
ForlargerTVs,theSM-RAZOR-ART2-XLcontainsextensionbracketsthatcanbeusedtoextendtheverticalbarstofitlargerTVs.(Figure9)
C. Insertsuitablescrews(AtoP)throughthewashers(SorT),andtheuprightbarsintothebackofthedisplay,andtighten.Fordisplayswithrecessedmountingholes,spacers(QorR)canbeusedbetweenthedisplayandtheTVPlate.
Step 5. Attaching the Display to the Arm AssemblyA. Liftthedisplayandplaceitontheendofthe
ArmAssemblyhookingittothetopoftheArmPlate,andaligningthebottomscrewswiththeslotsonthebottomoftheArmPlate.(Figure10)
B. SecurethedisplaytotheArmPlateusing2Washers(X)andLockingNuts(Y).TightenthenutswithanS10SocketWrench(AD)toensurethedisplayissecurelyfastenedtotheArmAssembly.(Figure10)
C. FollowthestepsforHorizontalLevelAdjustmenttoensurethatthedisplayislevel.
Note: TheTVPlateshouldbehorizontallycenteredonthebackofthedisplay.Ifthisneedstobeadjusted,loosenthescrewsfortheuprightbarsandaligntheTVPlateasneededonthebackofthedisplay.
Figure 8A
Orientation Marking(Up Arrow)
Horizontal VESA Markings
300400
500600
700(XL Only)
800(XL Only)
Figure 8B
Figure 9
Extension Bracket (AF)
Extension BracketScrews (AG)
Figure 10
Step 5A
Step 5B
pg.8
Installation Manual
© 2012 Strong
Step 6. Horizontal Level Adjustments
Step 7. Vertical Position Adjustments
Adjusting Display Position
A. LoosenthelockingnutsatthebottomoftheArmAssemblyendplate.(Figure11)
B. Placealevelontopofthedisplay,androtatethedisplayuntilitishorizontallylevel.(Figure12)
C. TightenthelockingnutsatthebottomoftheArmAssemblyendplate,andthenloosen¼turn.Thiswillallowforthedisplaytobepositionedwithlittleforce.
TheverticalpositionoftheTVcanbeadjusted+/-.5”fromthepre-adjustedcenter.Thisisachievedbytightening(Up),orloosening(Down)theVerticalAdjustmentScrewlocatedontheArmPlate.
A. ExtendtheArmtoaccesstheVerticalPositionAdjustment.
B. Loosenthe4LockNutsontherearoftheArmPlateusingtheS10SocketWrench(AD).(Figure14)
C. UsingtheS5AllenKey(AC),tightentheAdjustmentScrewtoRaisethedisplay,orloosenthescrewtoLowerthedisplay.(Figure13)
D. Tightenthe4LockNutsontherearoftheArmPlateusingtheS10SocketWrench(AD).(Figure14)
E. RetracttheArmifnecessary.
Horizontal LevelAdjustment Nuts
Figure 11
+/- 4°
Figure 12
Figure 13
S5 Allen Key (AC)
Lock Nuts
Note: Right Arm Not Shown to ExposeLock Nut Position
Figure 14
Installation Manual
pg.9www.snapav.com Support: 866.838.5052
Step 8. Adjusting Home Position (Fully Retracted)
Step 9. Tilt Adjustments
Note: OnlytheTVPlatesideofthelatchispre-installed,theHomePositionLatchcliprequiresinstallation,andadjustment.
A. Extendthearmoutawayfromthewall.
B. PositiontheHomePositionLatchclipoverthe2holesontheverticalbaronthewallsideoftheArmAssemblyandsecureusingtheincludedscrews.(Figure15A)
Note: Aftertightening,loosen¼turntoallowforadjustingthepositionoftheclip.
C. Retractthearmuntila“Click”soundisheardwhentheArmisfullyretracted.
D. Ifno“Click”isheard,notethepositionoftheLatchonthedisplayendoftheArminrelationtotheLatchingCliponthewallendoftheArm.
E. Loosen,butdonotremovethescrewsfromtheLatchingClip.
F. AdjustthepositionoftheClipupordownsothatthebottomlinesupwiththeLatch.(Figure15B)
G. Tightenthescrews,andRetractthearmuntila“Click”soundisheard.
Repeatstep8AtoEuntila“Click”isheardandthedisplayLatchescompletelytothewallmount.
ThemountincludesaHomePositionLatchwhichLatchestheArmtotheWallMounttoavoidthedisplaybeingpushedawayfromthewallduetocabling.
Figure 15 A
Figure 15 B
Latching Clip (AH)
M5x8 Bolts (AI)
Verticalangleadjustingdoesnotrequirelooseninganyboltsorscrews.Thetiltplatetensionhasbeenpre-adjustedforeasytiltanglechangesformostTVs,HeavierTVsmaysagduetotheextraweight.
Ifthisoccurs,simplyplacetheTVata0°angle,andtightenthe4LockNutsoneachsideoftheendplateusingtheS8SocketWrench(AE).Oncetightened,theTVangleshouldbeadjustablebysimplytiltingittothedesiredangle.(Figure16)
Figure 16
12° 5°
Tilt Adjustment Nuts(2 on Each Side)
pg.10
Installation Manual
© 2012 Strong
Dimensions
Step 10. Wire Management
Wirescanberoutedonthetoporbottomofthearms,andsecuredusingzipties.Coversareprovidedtohidewiresthathaveroutedalongthetopofthefrontarms,andbottomofthereararms.(Figure17)
Additionally,wirescanbeziptiedtotheclipsontheverticalbarsoftheTVbracket.(Figure18)
Figure 17
Figure 18
Wire Clips
25.50
18.55
1.60
9.32
8.18
17.50
20.31
Installation Manual
pg.11www.snapav.com Support: 866.838.5052
Lifetime Limited WarrantyStrong™MountshaveaLifetimeLimitedWarranty.Thiswarrantyincludespartsandlaborrepairsonallcomponentsfoundtobedefectiveinmaterialorworkmanshipundernormalconditionsofuse.Thiswarrantyshallnotapplytoproductswhichhavebeenabused,modifiedordisassembled.ProductstoberepairedunderthiswarrantymustbereturnedtoSnapAVoradesignatedservicecenterwithpriornotificationandanassignedreturnauthorizationnumber(RA).
Lifetime
Contacting Technical SupportPHONE: (866)838-5052EMAIL: [email protected]
©2012STRONG™130205-1540