SLUDGE STORAGE TANK BID FORM - CONTRACT A ODOT UNIT … · 2019. 10. 7. · 4 1 flange, 6 in, mj...

ODOT UNIT PRICE UNIT PRICE TOTAL UNIT TOTAL PRICENO. ITEM DESCRIPTION QUANTITY UNIT MATERIAL LABOR PRICE BID

1 201 Clearing and Grubbing 1 LS

2A 203 Excavation and Embankment 1,815 CY

2B 203 Geopier Embankment 1,533 CY

3 204 Subgrade Compaction and Proof Rolling 4,462 SY

4 623 Construction Layout Staking 1 LS

5 SPECIAL Geopier Foundation 1 LS

6A 304 Limestone Aggregate Base, 304 833 CY

6B 304 No.1/No.2 Limestone Aggregate Base 416 CY

6C SPECIAL Truck Drive Area, As Per Plan 1 LS

7 SPECIAL 12" Reinforced Concrete Foundation Including Ringwall 1 LS

8 659 Seeding and Mulching 9,870 SY

9 832 Erosion Control 5,000 EA 1.00$ $5,000.00

CITY OF WOOSTERSLUDGE STORAGE TANKBID FORM - CONTRACT A

CONTRACT "A" BID TOTAL

Division of Engineering Bid Form Page 1 of 3

ODOT UNIT PRICE UNIT PRICE TOTAL UNIT TOTAL PRICENO. ITEM DESCRIPTION QUANTITY UNIT MATERIAL LABOR PRICE BID

10 SPECIAL Bolted Steel Tank 1 LS

11 SPECIAL Tank Roof System 1 LS

12 SPECIAL Pipe and Fittings 1 LS

13 SPECIAL Valves and Accessories 1 LS

14 SPECIAL Entry Mixer 1 LS

15 SPECIAL Pumps 1 LS

16 SPECIAL Blowers 1 LS

17 SPECIAL Air Compressor 1 LS

18 SPECIAL Pump Room 1 LS

19 SPECIAL Instrumentation 1 LS

20 SPECIAL Sensors 1 LS

21 SPECIAL Lighting 1 LS

22 SPECIAL Electrical 1 LS

COMBINED A & B BID TOTAL

CITY OF WOOSTERSLUDGE STORAGE TANKBID FORM - CONTRACT B

CONTRACT "B" BID TOTAL


COMPANY :

ADDRESS :

I, , having fully read the Instruction to Bidders, General Conditions and

Specifications and being authorized to do so, submit this bid on behalf of the above named bidder.

Bidder acknowledges receipt of the following addendum:

No. Date No. Date

Signature Title Date

NOTE: The Bidder may provide a combination bid price if award of both contracts would result in a lower total bid.

The combination bid price will only be used for award of both contracts to a single bidder.

The price difference between the sum total of the single contract bids and the combination bid will be pro-rated appropriately throughout the bid items for both contracts.

The bids will be awarded separately or in combination, whichever the City deems will best serve the City.


This drawing contains valuable confidential and proprietary information that belongs to Green Arrow ("GA”), and is subject to a Confidentiality and Nondisclosure Agreement. GA is the author and owner of this drawing, and retains all common law, statutory and other r ights and privileges with respect hereto, including copyrights. The information contained herein may not at any time be used for any unauthorized purpose, nor reproduced by or provided to any third party, without the pr ior written consent of GA.

© 2017, Green Arrow. All rights reserved.

1680 MADISON AVENUE

WOOSTER, OH 44691

CHECKED BY

DRAWN BY

AREA

JOB NO.

SHEET NO.

DWG NO.

DATESCALE

E

D

C

B

A

1 2 3 4 5 6 7NO. DATE

BY

REVISION

NO. DATE

BY

REVISION

NO. DATE

BY

REVISION

8

ELECTRICAL TIE-IN AT MLSS BLDG

09/24/19

NM

0924

N.T.S.

1513

01

C:\U

sers

\nm

ast\

Goo

gle

Dri

ve\G

reen

Arr

ow

\02

Proj

ects

\151

3 Ci

ty o

f Wo

oste

r\07

Dra

win

gs\0

4 Co

nstr

uctio

n\U

TILI

TY T

IE-I

N T

-010

TO

M

LSS\

LOCATE FUSED DISCONNECT AT THIS COLUMN LOCATION ON THE MCC

BRING FEEDER CONDUIT IN ABOVE MCC ON NORTH WALL ALONG WITH SPARE ABOVE EXISTING CONDUIT AND BELOW THE ROOM CEILING.

NETWORK CABINET ALONG EAST WALL OF MCC ROOM. TIE-IN FIBER HERE.

APPROX. LOCATION OF MCC ON NORTH BLDG. WALL FOR POWER ENTRY. ABOUT 10 FEET OFF OF NW BUILDING CORNER. FIELD VERIFY.

NOTES:1. CONTRACTOR RESPONSIBLE FOR SITE VISIT PRIOR TO BID TO DETERMINE MOST APPROPIATE ROUTING.2. POWER CONDUIT IN THIS ROOM SHALL BE GRC.3. NETWORK CONDUIT MAY BE EMT4. PROVIDE HEAT TRACE CIRCUIT FROM LIGHTING PANEL TO EXPOSED NPW LINE FROM BUILDING ENTRY TO 3 FEET BELOW GRADE. LIGHTING PANEL ON WEST WALL OF MCC ROOM.5. PROVIDE PULL BOX AS REQUIRED FOR THE SERVICE FEED.6. PROVIDE WEATHERTITE SEAL TO THE BUILDING AT ALL PENETRATIONS.

This drawing contains valuable confidential and proprietary information that belongs to Green Arrow ("GA”), and is subject to a Confidentiality and Nondisclosure Agreement. GA is the author and owner of this drawing, and retains all common law, statutory and other r ights and privileges with respect hereto, including copyrights. The information contained herein may not at any time be used for any unauthorized purpose, nor reproduced by or provided to any third party, without the pr ior written consent of GA.

© 2017, Green Arrow. All rights reserved.

1680 MADISON AVENUE

WOOSTER, OH 44691

CHECKED BY

DRAWN BY

AREA

JOB NO.

SHEET NO.

DWG NO.

DATESCALE

E

D

C

B

A

1 2 3 4 5 6 7NO. DATE

BY

REVISION

NO. DATE

BY

REVISION

NO. DATE

BY

REVISION

8

NATURAL GAS AND NON-POTABLE WATER TIE-IN AT MLSS

BLDG

09/24/19

NM

0924

N.T.S.

1513

02

C:\U

sers

\nm

ast\

Goo

gle

Dri

ve\G

reen

Arr

ow

\02

Proj

ects

\151

3 Ci

ty o

f Wo

oste

r\07

Dra

win

gs\0

4 Co

nstr

uctio

n\U

TILI

TY T

IE-I

N T

-010

TO

M

LSS\

TIE-IN TO EXISTING NATURAL GAS AND NPW LINES OVERHEAD.

ROUTE NG AND NPW LINES ALONG PARTITION WALL WITH MCC ROOM TO TIE POINTS AT SOUTH WALL.

NATRUAL GAS AND NPW TO EXIT BUILDING ALONG NORTH WALL ABOVE FLOOR SLAB NEAR THE PARTITION WALL WITH THE MCC ROOM. PROVIDE ACCESSIBLE SHUT OFF BALL VALVES NEAR WALL PENTRATION FOR BOTH LINES.

APPROX. LOCATION OF NPW AND NATURAL GAS ENTRY ON NORTH BLDG. WALL . ABOUT 17 FEET OFF OF NW BUILDING CORNER. ENTER BLDG. ABOVE FLOOR SLAB.

HEAT TRACE AND CLAD EXPOSED WATER PIPE TO 3' BELOW GRADE.

NOTES:1. CONTRACTOR RESPONSIBLE FOR SITE VISIT PRIOR TO BID TO DETERMINE MOST APPROPIATE ROUTING.2. NPW MAY BE RUN IN PVC IN THE BUILDING, MATCH LINE SIZE ON YARD PIPING PLAN.3. NG SHALL BE RUN IN BLACK STEEL PIPE. MATCH LINE SIZE ON YARD PIPING PLAN.4. PAINT NG LINE TO MATCH CURRENT NG PIPING IN RED.5. PROVIDE WEATHERTITE SEAL TO THE BUILDING AT ALL PENETRATIONS.

ROUTE NG AND NPW LINES UP WALL TO BELOW AIR HANDLER DUCT. SUPPORT WITH STURT AND CLAMPS FROM WALL.

REVISION

LEVEL DESCRIPTION DATE

R0 INITIAL RELEASE 9/26/19

TANK BUILDING INTERIOR PIPING B-001 PIPING SPOOLS SHOP DRAWINGS

SEPT 26, 2019, R0

CITY OF WOOSTER EFFLUENT STORAGE FACILITY

1123 OLD COLUMBUS RD

WOOSTER, OH 44691 Ned Mast

Green Arrow Engineering

330-465-9132

BILL OF MATERIAL

PART NO. DESCRIPTION QTY. LENGTH

6"-DI-SL-621 PIPE SPOOL, DI TANK DROP 1

10"-CS150-SL-650B PIPE SPOOL, P-020 PUMP SUCTION 1

8"-CS150-SL-650C PIPE SPOOL, P-020 PUMP PRESSURE 1

16"-CS150-SL-650D PIPE MANIFOLD, 16 INCH, P-020 PUMP PRESSURE 1

8"-CS150-SL-650A PIPE SPOOL, P-020 PUMP PRESSURE 1

6"-CS150-SL-650H PIPE SPOOL, P-020 PUMP PRESSURE 1

1513-5009-030 16"-DI-SL-650D MANIFOLD STAND ASSEMBLY 2

1900-9000-006 6 INCH PIPE SUPPORT 3 36 IN

DRAWING INDEX

DRAWING NO. DESCRIPTION REV

B-001 PP-01 SLUDGE PROCESS PIPING, B-001 -

6"-DI-SL-621 PIPE SPOOL, DI TANK DROP -

10"-CS150-SL-650B PIPE SPOOL, P-020 PUMP SUCTION -

8"-CS150-SL-650C PIPE SPOOL, P-020 PUMP PRESSURE -

16"-CS150-SL-650D PIPE MANIFOLD, 16 INCH, P-020 PUMP

PRESSURE -

8"-CS150-SL-650A PIPE SPOOL, P-020 PUMP PRESSURE -

6"-CS150-SL-650H PIPE SPOOL, P-020 PUMP PRESSURE -

1513-5009-030 16"-DI-SL-650D MANIFOLD STAND ASSEMBLY -

1513-5009-030-001 16"-DI-SL-650D MANIFOLD STAND WELDMENT -

1513-5009-030-002 16"-DI-SL-650D MANIFOLD STRAP WELDMENT -

1900-9000-006 6 INCH PIPE SUPPORT -

1900-9000-006-001 PIPE SUPPORT, BASE WELDMENT - 1900-9000-006-002 PIPE SUPPORT, UPPER WELDMENT - 1900-9000-006-003 PIPE SUPPORT, PIPE STRAP -

1900-9000-055 FLANGE WELDING STANDARD DETAIL -

74.68

6.37

8.95

46.75

32.77

27.00

116.50°

118.00°

148'-6.5000"TANK WALL REF.

124.00°

180.00INSIDE WALL

218.62

3.00

3.00

119.75°

60.44

95.63

16.62

3.21

4.77

BUILDINGCENTERLINE

BUILDINGNE WALL

36.00 41.00

108.50

20.50

70.50

12.50PUMP HOUSEKEEPING PAD

65.74

32.00

FINISHED FLOOR

TANK 10 INCH PORT& MANUAL VALVE



7

9

6

4

1

2

3

5

11

8




10

ECN REV. DESCRIPTION DATE APPROVED

REVISIONS

ITEM NO. QTY. NUMBER DESCRIPTION

1 1 6-DI-SL-621 DI TANK DROP

2 1 10-CS150-SL-650B PIPE SPOOL

3 1 P-020 SLUDGE PUMP, 8X8

4 1 8-CS150-SL-650C PIPE SPOOL

5 1 KNIFE GATE, 8 IN, PNEUMATIC

6 1 16-CS150-SL-650D PIPE MANIFOLD, 16 INCH

7 1 8-CS150-SL-650A PIPE SPOOL

8 1 KNIFE GATE, 6 IN, MANUAL

9 1 6-CS150-SL-650H PIPE SPOOL

10 2 1513-5009-030 16-DI-SL-650D MANIFOLD STAND ASSEMBLY

11 3 1900-9000-006 PIPE SUPPORT ASSEMBLY

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

09/19/2019

1 of 11:32

D

3rd ANGLEPROJECTION

SCALE

FORMAT

SHEET #

B-001 PP-01

PROJECT NO.

TITLE

DRAWING NO.

UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHESTOL. ON ANGLES ±1°TOL. ON 1 PLACE DECIMALS ±0.25

CHECKED

DESIGNED

DIMENSIONING & TOLERANCING INACCORDANCE WITHASME Y14.5M-1994

NAMEDATE

BR

SURFACE TREATMENT

EQUIPMENT LETTER

EQUIPMENT AREA

WEIGHT

MATERIAL

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

1399 Campus Drive Wooster, OH 44691

09/19/2019

1 of 11:32

D

3rd ANGLEPROJECTION

SCALE

FORMAT

SHEET #

PROJECT NO.CUSTOMER NAME

TITLE

DRAWING NO.


CHECKED

DESIGNED


NAMEDATE

BR

SURFACE TREATMENT

EQUIPMENT LETTER

EQUIPMENT AREA

WEIGHT

MATERIAL

- NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

SLUDGE PROCESS PIPING, B-001

2

4

6

1

3

8

5 9

7

73.50

8.50

63.00

9.00 4.50

2.00

10.00 106.74

41.00TO TANK FLOOR

3.26

FABRICATED OR CAST DI PIPE WITH FLANGE END.

MJ RESTRAINT ONLY

SWING MJ ELBOW AS REQUIRED FOR PIPE CONTINUATION

POUR SOILD CONCRETE THRUST BLOCK UNDER JOINT OR USE 8 X 4 16 SOLID BLOCKS UNDER END OF PIPE TO DISTRIBUTE LOAD. BED IN #8 WASHED GRAVEL.

NOTES:

FIELD ASSEMBLE AND INSTALL1.USE TYPICAL FLAT GASKETS AND HARDWARE FOR FLANGE JOINTS2.


REVISIONS

ITEM NO. QTY. NUMBER DESCRIPTION LENGTH

1 1 DI ELBOW, FLANGED, 6 IN

2 1 DI ELBOW, MJ X MJ, 6 IN

3 1 KNIFE GATE, 6 IN

4 1 FLANGE, 6 IN, MJ RESTRAINT, MEGALUG. EBBA IRON SERIES 1100

5 1 DI PIPE, 6 INCH, FLANGED ENDS 9

6 1 DI PIPE, 6 INCH, FLANGE END 8.5

7 1 DI PIPE, 6 INCH, FLANGE END 61.5

8 1 6" DI PIPE SADDLE, 1" NPT OUTLET

9 1 242-0760 JCM INDUSTRIES 242 OPTIMUM RANGE DI COUPLING

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

DI TANK DROP - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

CUSTOMER NAME PROJECT NO.

6-DI-SL-621

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:24 1of1

9/14/19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.1513 CITY OF WOOSTER

FOR UG CONTINUATIONSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:24 1of1

9/14/19

D D

B B

A A

E E

F F

18.25 12.00

8.13

22.00

2.76

9.0

11.00

2

4

6

1

6

3

5

7

8

NOTES:PROVIDE WELDED SPOOL WITH THRED-O-LET AND 8 IN. BLIND FLANGE1.DI FITTINGS, VALVE, AND EXPANSION JOINT PROVIDED BY OTHERS2.REFER TO STD. FLANGE WELDING DETAIL.3.FLANGE HARDWARE AND GASKETS PROVIDED BY OTHERS.4.


REVISIONS


1 1 PIPE, 10 IN, CS 17.75

2 1 TEE, 10 X 8, REDUCING, DI

3 1 REDUCER, CONC., 10 X 8, FLANGED, DI

4 1 KNIFE GATE VALVE, 10 IN

5 1 MSODEE0800 EXP. JOINT, 1 SPHERE, 8 IN, EPDM (METRASPHERE)

6 2 FLANGE, 10 IN, SLIP-ON

7 1 3/4 IN THREDOLET

8 1 FLANGE, 8 IN BLIND, W/ 1 IN NPT CENTER TAP, DI

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

PIPE SPOOL - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


10-CS150-SL-650B

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:24 1of1

9-15-19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

10-CS150-SL-650B

P-020 PUMP SUCTIONSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:24 1of1

9-15-19

D D

B B

A A

E E

F F

1

4

565

3

2

5 7

22.75+-2.000.00 6.25

8.00

20.00

41.00

11.00

NOTES:

PIPE ENDS WITH EZ FLANGES ARE NEEDED FOR FIELD ADJUSTMENT. CUT 1.SPOOLS 2 INCH LONGER THAN NOMNIAL LENGTH FOR FIELD CUTTINGLABEL ALL LOOSE PIPE COMPONENTS WITH SPOOL NUMBER PRIOR TO 2.SHIPMENT. USE METAL TAG AND WIRE THROUGH FLANGE BOLT HOLE.FLANGE BOLTS AND GASKETS PROVIDED BY OTHERS.3.SEE STD. DETAIL FOR FLANGE WELDING4.SHOP PAINT ALL SPOOLS WITH INDUSTRIAL ENAMEL, BLACK5.


REVISIONS

ITEM NO. QTY. DESCRIPTION LENGTH CUT LG.

1 1 PIPE, 8 IN, SCH 40, CS 22.25 24.25

2 1 PIPE, 8 IN, SCH 40, CS 6 6

3 1 PIPE, 8 IN, SCH 40, CS 7.75 7.75

4 1 ELL - LR - 8 IN - BUTT WELD

5 3 FLANGE, 8 IN, SLIP-ON, 150#

6 1 FLANGE, 8 IN, E-Z ADAPTER. EBBA IRON SERIES 1000


CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


8-DI-SL-650C

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:16 1of1

9-12-19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


P-020 PUMP PRESSURESHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:16 1of1

9-12-19

D D

B B

A A

E E

F F

90.00 106.00 13.00

13.00

18.00

13.00

13.00

18.00

36.00

18.00

4

22 55 2

33

1

40.50

6

NOTES:

MAKE PIPE NIPPLES FROM SCH. 40 CS PIPE AT EACH OUTLET1.FLANGE BOLTS AND GASKETS PROVIDED BY OTHERS.2.SEE STD. DETAIL FOR FLANGE WELDING3.SHOP PAINT ALL SPOOLS WITH INDUSTRIAL ENAMEL, BLACK4.


REVISIONS

ITEM NO. QTY. DESCRIPTION LENGTH

1 1 PIPE, 16 IN. SCH. 40, CS 90 IN.



4 2 16 IN PIPE CAP BUTT WELD

5 2 FLANGE 6 IN BLIND

6 1 THREDOLET 1 IN

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

PIPE MANIFOLD, 16 INCH - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

900 LBS

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


16-CS150-SL-650D

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:24 1of1

09/12/19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:24 1of1

09/12/19

D D

B B

A A

E E

F F

3

4

5

6

6

1

2

7

8

9

37.00+-2.000.00

13.00+-2.000.00

6.25

18.00

2.36

25.00

55.25

NOTES:

DI FITTINGS AND VALVE PROVIDED BY OTHERS1.PIPE ENDS WITH EZ FLANGES ARE NEEDED FOR FIELD ADJUSTMENT. CUT 2.SPOOLS 2 INCH LONGER THAN NOMNIAL LENGTH FOR FIELD CUTTINGLABEL ALL LOOSE PIPE COMPONENTS WITH SPOOL NUMBER PRIOR TO 3.SHIPMENT. USE METAL TAG AND WIRE THROUGH FLANGE BOLT HOLE.FLANGE BOLTS AND GASKETS PROVIDED BY OTHERS.4.SEE STD. DETAIL FOR FLANGE WELDING5.SHOP PAINT ALL SPOOLS WITH INDUSTRIAL ENAMEL, BLACK6.


REVISIONS

ITEM NO. QTY. DESCRIPTION LENGTH CUT LG.

1 1 PIPE, 8 IN, SCH 40, CS 12.75 14.75

2 1 PIPE, 8 IN, SCH 40, CS 6 6

3 1 PIPE, 8 IN, SCH 40, CS 36.5 38.5

4 1 ELL - LR - 8 IN - BUTT WELD



7 1 DI TEE, FLANGED, 8 IN


9 1 FLANGE, 8 IN BLIND, W/ 1 IN NPT CENTER TAP, DI

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


8-CS150-SL-650A

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:16 1of1

9-12-19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE



FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:16 1of1

9-12-19

D D

B B

A A

E E

F F

9

9

4

1

5

6

7

8

8

8

7

8

8

11

10

2

12

8

3

NOTES:

ITEM 7, EZ FLANGES PROVIDED BY OTHERS1.iTEM 10, FLOW METER, PROVIDED BY OTHERS2.ITEM 11, KNIFE GATE VALVE, PROVIDED BY OTHERS3.PIPE ENDS WITH EZ FLANGES ARE FOR EASE OF 4.ASSEMBLY/DISASSEMBLY. FIELD LENGTH ADJUSTMENT NOT REQUIRED FOR THIS SPOOL.LABEL ALL LOOSE PIPE COMPONENTS WITH SPOOL NUMBER PRIOR TO 5.SHIPMENT. USE METAL TAG AND WIRE THROUGH FLANGE BOLT HOLE.FLANGE BOLTS AND GASKETS PROVIDED BY OTHERS.6.SEE STD. DETAIL FOR FLANGE WELDING7.SHOP PAINT ALL SPOOLS WITH INDUSTRIAL ENAMEL, BLACK8.


REVISIONS

ITEM NO. QTY. DESCRIPTION NOMINAL LENGTH

1 1 PIPE, 6 IN, SCH 40, CS 9.88

2 1 PIPE, 6 IN, SCH 40, CS 8.00

3 1 PIPE, 6 IN, SCH 40, CS 7.75

4 1 PIPE, 6 IN, SCH 40, CS 38.75

5 1 PIPE, 6 IN, SCH 40, CS 37.50

6 1 PIPE, 6 IN, SCH 40, CS 18.00



9 2 ELL, 6 IN, 90 DEG., BUTT WELD, SCH 40

10 1 FLOW METER, 6 IN


12 1 CAM LOCK MALE 6 IN SHANK TO FLAT FLANGE


CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


6-CS150-SL-650H

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:16 2of1

9-12-19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE



FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:16 2of1

9-12-19

D D

B B

A A

E E

F F

8.00

8.25 34.25

118.64

10.13

38.00 18.50 39.00

19.13

3.06

1.50

13

0.25

0.625

2.5

SCALE 1 : 12

CAMLOCK FLANGE ADAPTERMAKE FROM SS HOSE SHANK CAM LOCKAND 5/8 THK. 304 SS PLATE FLANGECUT HOSE SHANK TO LENGTHCUT PLATE FLANGE ID TO FIT SHANK

0.25

11.00

8X 0.875

5.9 9.50 BC

22.50°


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


6-CS150-SL-650H

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:24 2of2

9-12-19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE



FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:24 2of2

9-12-19

D D

B B

A A

E E

F F

70.50 62.50

4

2

3

5

1


REVISIONS

ITEM NO. QTY. NUMBER DESCRIPTION DESCRIPTION21 1 1513-5009-030-001 16-CS150-SL-650D MANIFOLD STAND WELDMENT2 1 1513-5009-030-002 16-CS150-SL-650D MANIFOLD STRAP WELDMENT3 4 HARDWARE HEX BOLT 3/4-10X4X1.75, GALV.4 4 HARDWARE LOCK WASHER 3/4", 1.265 O.D., GALV.5 4 HARDWARE HEX NUT 3/4-10, GALV.

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

16-CS150-SL-650D MANIFOLD - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

220.40 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1513-5009-030

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:16 1of1

09/18/2019

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

STAND ASSEMBLYSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:16 1of1

09/18/2019

09/18/2019

D D

B B

A A

E E

F F

25.00

12.00

12.00

6.00

6.00

54.00

4.50

62.50 NOTES:

SHOP PAINT WITH INDUSTRIAL ENAMEL, BLACK1.

22.00 0.88 2.25

12.00

12.00

0.88 9.00

9.00

0.25

1.92 6.00

59.88

0.50

6.00

0.20

2

1

6

4

3 5


REVISIONS

ITEM NO. QTY. DESCRIPTION LENGTH1 1 C6x8.2 542 1 C6x8.2 253 1 TS4.5x4.5x0.25 59.884 2 GUSSET 12x12x0.255 2 GUSSET 6x6x0.256 2 FOOT PLATE, 12x12x0.5

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

174.91 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1513-5009-030-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:16 1of1

09/18/2019

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

STAND WELDMENTSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:16 1of1

09/18/2019

09/18/2019

D D

B B

A A

E E

F F

16.00

25.00

R8.00

0.50

4.50 4.50

7.25

4.00

7.75

NOTES:

SHOP PAINT WITH INDUSTRIAL ENAMEL, BLACK1.

0.25

0.875

22.00

2.25

0.25

6.00


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

45.16 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1513-5009-030-002

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 1of1

09/18/2019

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

STRAP WELDMENTSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 1of1

09/18/2019

09/18/2019

D D

B B

A A

E E

F F

VARIES

A

A

4

5

2

6

3

1

2.88

0.203

FIELD CUT TO LENGTH

SECTION A-A

NOTE:SHOP PRIME ALL COMPONENTS WITH RED OXIDE PRIMER

2-1/2" SCH 40 EXTENSION PIPE SHOULD BE FIELD CUT TO LENGTHSO THE UPPER AND LOWER PIPE SUPPORTS CAN BE POSITIONED,TACKED IN PLACE AND THEN FIELD WELDED. PAINT FIELD WELDED ASSEMBLY SAFETY BLUE


REVISIONS

ITEM NO. QTY. NUMBER DESCRIPTION DESCRIPTION21 1 1900-9000-006-001 PIPE SUPPORT BASE WELDMENT2 1 1900-9000-006-002 PIPE SUPPORT UPPER WELDMENT3 1 1900-9000-006-003 PIPE SUPPORT PIPE STRAP4 2 HARDWARE HEX BOLT 1/2-13X2.25X2.25, GALV.5 2 HARDWARE HEX NUT 1/2-13, GALV.6 1 PIPE 2-1/2" SCH 40 PIPE FIELD CUT TO LENGTH

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

6 INCH PIPE - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-006

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 1of1

14FEB19

14FEB19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-006

SUPPORT ASSEMBLYSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 1of1

14FEB19

14FEB19

D D

B B

A A

E E

F F

8.00

0.300

8.00

6.00 0.75

3.50

6.00

AA

0.38

3.50

2.00

2.90

SECTION A-A

BASE PLATE

3" SCH 80 PIPELOWER RECEIVER


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

PIPE SUPPORT - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-006-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:2 1of1

14FEB19

14FEB19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-006-001

BASE WELDMENTSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:2 1of1

14FEB19

14FEB19

D D

B B

A A

E E

F F

4.00

8.50 0.5625

10.00

AA

3.50

6.00

0.25

0.50

R0.25

2.90

0.30

6.625

2.90

SECTION A-A

PIPE SADDLE STRAP

3" SCH 80 PIPEUPPER RECEIVER


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-006-002

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:2 1of1

14FEB19

14FEB19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-006-002

UPPER WELDMENTSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:2 1of1

14FEB19

14FEB19

D D

B B

A A

E E

F F

0.25

6.625

R0.25 TYP.

0.50

10.00

4.00

8.50

0.5625


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-006-003

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:2 1of1

14FEB19

14FEB19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-006-003

PIPE STRAPSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:2 1of1

14FEB19

14FEB19

D D

B B

A A

E E

F F

X° X°

A

A

150# SLIP-ON FLANGEWELDING STD. DETAIL

FLANGE BOLT HOLE PATTERNTO STRADDLE THE NATURAL CENTERLINE TYP.

0.25

LENGTH DIM.TO RAISED FACE TYP.

SECTION A-A

1/4

1/4

X° X°

B

B

FLAT FLANGEWELDING STD. DETAIL


0.50

0.25

LENGTH DIM.TO FLANGE FACE TYP.

SECTION B-B

1/4

1/4 ECN REV. DESCRIPTION DATE APPROVED

REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

FLANGE WELDING - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-055

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 1of1

09/20/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-055

STANDARD DETAILSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 1of1

09/20/2019

D D

B B

A A

E E

F F

REVISION



BLOWER SKID B-066 SHOP DRAWINGS

SEPT 08, 2019, R0





330-465-9132

ITEM

NO

.PA

RT

NO

.Q

TY.

DESC

RIP

TIO

NM

ATE

RIA

LM

FGM

FG.

NO

.M

RO

SU

PPLI

ER

MR

O S

UPPLI

ER

P/N

119-1

10-0

01

1FR

AM

E W

ELD

MEN

TM

ILD

STE

EL

219-1

15-1

00

2BLO

WER

, R

OO

TS T

YP

E,

UR

AI G

AS-

33

HO

WD

EN

PD

BLO

WER

S33 U

RA

I G

AS,

LEFT

-HA

ND

DR

IVE,

HO

RIZ

ON

TAL

319-1

15-1

01

4FO

OT,

FO

R H

OR

IZO

NTA

L M

OU

NTI

NG

HO

WD

EN

PD

BLO

WER

S

419-1

10-1

12

28.9

5 O

D,

8.2

PIT

CH

DIA

. FO

R A

-SEC

T. B

ELT

S, 1

GR

OO

VE

PU

LLEY,

SDS

BU

SHIN

G B

OR

ETB

WO

OD

S861B

MSC

82245549

519-1

10-1

13

2SD

S BU

SHIN

G,

3/4

IN

BO

RE,

108 IN

-LB B

OLT

TO

RQ

UE

TB W

OO

DS

SDS3

4M

SC82225061

619-1

10-1

05

25 H

P M

OTO

RBA

LDO

REM

3663T

719-1

10-1

06

2A

DJ.

MO

TOR

BA

SE F

OR

184 F

RA

ME

MIL

D S

TEEL

Mc

MA

STER

-CA

RR

62035K

25

819-1

10-1

11

2SD

S BU

SHIN

G,

1-1

/8 IN

BO

RE,

108 IN

-LB B

OLT

TO

RQ

UE

TB W

OO

DS

SDS1

18

MSC

82224965

919-1

10-1

10

24.9

5 O

D,

4.2

PIT

CH

DIA

. FO

R A

-SEC

T. B

ELT

S, 1

GR

OO

VE

PU

LLEY,

SDS

BU

SHIN

G B

OR

ETB

WO

OD

S461B

MSC

82245432

10

19-1

10-1

14

2BELT

, A

X60

BR

OW

NIN

GA

X60

MSC

78954872

11

19-1

10-0

02

2BELT

GU

AR

DSE

E N

OTE

12

18-1

00-1

20

2BA

CK

-PR

ESS

UR

E R

EG

ULA

TOR

FISH

ER

289H

13

INST

RU

MEN

T4

ELE

CTR

ON

IC P

RESS

UR

E T

RA

NSM

ITTE

R/S

WIT

CH

WIT

H

LOC

AL

DIS

PLA

Y,

24V

DC

EN

DR

ESS

/HA

USE

RFO

RBER

G S

CI.

CO

NTA

CT

GA

E

14

VA

LVE

2SO

LEN

OID

SH

UT-

OFF

VA

LVE,

2 IN

NP

T,120V

AC

HO

NEYW

ELL

V4295A

1155

SUP

PLY

HO

USE

.CO

M

15

VA

LVE

2BU

TTER

FLY,

4 IN

, FU

LL-L

UG

, EP

DM

CI BO

DY

BR

AY

SER

IES

31

16

VA

LVE

2BA

LL V

ALV

E,

2 IN

NP

T, S

TD.

PO

RT,

SS

316 S

SA

PO

LLO

76-1

08-0

1

17

VA

LVE

4BA

LL V

ALV

E,

2 IN

NP

T, F

ULL

PO

RT,

SS

316 S

SA

PO

LLO

76-1

08-0

1

18

VA

LVE

4BA

LL V

ALV

E,

1/4

IN

NP

T, F

ULL

PO

RT,

SS

316 S

S

M

cM

AST

ER

-CA

RR

46495K

18

19

PIP

E F

ITTI

NG

4TE

E,

BU

TT W

ELD

, SC

H.

10,

2 IN

304 S

S

RJ

SALE

S

20

PIP

E F

ITTI

NG

10

LR E

LBO

W,

BU

TT W

ELD

, SC

H.

10,

2 IN

304 S

SR

J SA

LES

21

PIP

E F

ITTI

NG

2FL

AN

GE,

4 IN

, SL

IP-O

N304 S

S

RJ

SALE

S

22

PIP

E F

ITTI

NG

8SO

CK

ET-

WELD

UN

ION

, 2 IN

CH

304 S

S

RJ

SALE

S

23

PIP

E F

ITTI

NG

4C

OM

PR

ESS

ION

CO

UP

LER

FO

R 2

IN

PIP

EST

RA

UB

GR

IP-L

, EP

DM

,

G20450

GR

AIN

GER

5M

TA9

24

PIP

E F

ITTI

NG

4H

ALF

CO

UP

LIN

G,

1/4

NP

T304 S

S

M

cM

AST

ER

-CA

RR

4464K

471

25

PIP

E F

ITTI

NG

4TH

RED

-O-L

ET

1/2

NP

T304 S

S

M

cM

AST

ER

-CA

RR

4565T3

32

26

PIP

E F

ITTI

NG

2ST

REET

EL,

1/4

IN

304 S

S

M

cM

AST

ER

-CA

RR

4464K

36

27

PIP

E F

ITTI

NG

2C

OM

PR

ESS

ION

FIT

TIN

G,

1/4

IN

TU

BE X

1/4

NP

T316 S

S

M

cM

AST

ER

-CA

RR

52245K

533

28

PIP

E F

ITTI

NG

3C

LOSE

HEX

NIP

PLE

, 1/4

IN

304 S

S

M

cM

AST

ER

-CA

RR

4464K

721

29

PIP

E F

ITTI

NG

1P

IPE N

IPP

LE,

1/4

IN

X 6

LG

304 S

S

M

cM

AST

ER

-CA

RR

4830K

138

30

HA

RD

WA

RE

8SC

REW

KN

OB,

1/4

-20 X

3/4

LG

Ph

en

olic

Mc

MA

STER

-CA

RR

5993K

120

31

HA

RD

WA

RE

8FL

AT

WA

SHER

, 1/2

X 1

, SA

E T

YP

E B

18-8

Mc

MA

STER

-CA

RR

96659A

110

32

HA

RD

WA

RE

2ST

RU

T C

LAM

P,

4 IN

304 S

S

M

cM

AST

ER

-CA

RR

3115T5

2

33

HA

RD

WA

RE

6ST

RU

T C

LAM

P,

2 IN

304 S

S

M

cM

AST

ER

-CA

RR

3115T4

7

34

HA

RD

WA

RE

1P

IPE R

OU

TIN

G C

LAM

P,

1/4

IN

CH

, O

UTD

OO

R304 S

S

M

cM

AST

ER

-CA

RR

3249T2

37

35

TUBIN

G1

TUBIN

G,

1/4

IN

OD

, W

ELD

ED

, 0.0

35 W

ALL

304 S

S

M

cM

AST

ER

-CA

RR

8989K

721

BIL

L O

F M

ATE

RIA

LS

2 IN SCH. 40 PIPE NIPPLES

ITEM # QTY THREADED ONE END

LENGTH

104 16 4

106 2 6

108 6 8

TYPE LENGTH QTY FINISH WHERE USED

5/8-11 STUDS 3 32

5/8-11 NUTS 32

3/8-16 HX HD BOLT 1 8

3/8 WASHER, USS, 1IN OD 8

3/8-16 NUT 8

7/16/2014 1 8

7/16 LOCK WASHER 8

7/16 FLAT WASHER, SAE 1IN OD 8

ADDITIONAL REQUIRED FASTENERS

HOT DIPPED GALV. BUTTERFLY VALVES

HOT DIPPED GALV. MOTOR BASE TO FRAME

316 SS BLOWER TO FRAME

SIZE QTY EST. USAGE

2 INCH 2 - 20' LENGTHS 36 FEET


SCH 10 PIPE, 304L SS

DRAWING INDEX

DRAWING NO.

SHEET DESCRIPTION REV

19-100 1 BLOWER SKID ASSEMBLY DRAWING WITH PIPING - 19-100 2 BLOWER SKID ASSEMBLY DRAWING WITH PIPING - 19-100 3 BLOWER SKID ASSEMBLY DRAWING WITH PIPING - 19-100 4 BLOWER SKID ASSEMBLY DRAWING WITH PIPING -

19-110-001 1 FRAME WELDMENT - 19-110-001 2 FRAME WELDMENT -

19-110-001 3 FRAME WELDMENT -




19-110-002 1 BELT GUARD -

19-110-002 2 BELT GUARD -

19-115 1 ROOTS BLOWER REF. DRAWING -

15

12

22

14

17

15

22

22

13

25

1

6

2

4

9

8

10

5

30

16

22

23

23

17

CONDENSATE DRAINSEE ADJACENT VIEW

SUCTION HEADER

DISCHARGE HEADER

BACK-PRESSURE RELIEF

18

28

24

34

29

18

27

26

27

18

26

35

DETAIL VIEWCONDENSATE DRAIN LINES

ITEM 13 HIDDEN

NOTES:

PIPE NIPPLE AND PIPE MATERIAL SCHEDULE ON SHEET 31.NO BOM SUBSTITUTIONS WITHOUT ENGINEER'S APPROVAL2.ASSEMBLED WEIGHT ~1300 LBS WITH PIPING3.REMOVE DISCHARGE HEADER ASSEMBLY AT UNIONS CLOSEST TO SKID PRIOR TO SHIPPING TO JOB SITE4.SUPPORT DISCHARGE HEADER IN SHOP WITH PIPE STANCHION DURING ASSEMBLY5.SHIP ADDITIONAL 5/8 STUDS AND NUTS FOR BUTTERFLY VALVES LOOSE WITH ASSEMBLY. 6.


REVISIONS

ITEM NO. PART NO. QTY. DESCRIPTION MATERIAL MFG MFG. NO. MRO SUPPLIER MRO SUPPLIER P/N

1 19-110-001 1 FRAME WELDMENT MILD STEEL

2 19-115-100 2 BLOWER, ROOTS TYPE, URAI GAS-33 HOWDEN PD BLOWERS 33 URAI GAS, LEFT-HAND DRIVE, HORIZONTAL

3 19-115-101 4 FOOT, FOR HORIZONTAL MOUNTING HOWDEN PD BLOWERS

4 19-110-112 2 8.95 OD, 8.2 PITCH DIA. FOR A-SECT. BELTS, 1 GROOVE PULLEY, SDS BUSHING BORE TB WOODS 861B MSC 82245549

5 19-110-113 2 SDS BUSHING, 3/4 IN BORE, 108 IN-LB BOLT TORQUE TB WOODS SDS34 MSC 82225061

6 19-110-105 2 5 HP MOTOR BALDOR EM3663T

7 19-110-106 2 ADJ. MOTOR BASE FOR 184 FRAME MILD STEEL McMASTER-CARR 62035K25

8 19-110-111 2 SDS BUSHING, 1-1/8 IN BORE, 108 IN-LB BOLT TORQUE TB WOODS SDS118 MSC 82224965

9 19-110-110 2 4.95 OD, 4.2 PITCH DIA. FOR A-SECT. BELTS, 1 GROOVE PULLEY, SDS BUSHING BORE TB WOODS 461B MSC 82245432

10 19-110-114 2 BELT, AX60 BROWNING AX60 MSC 78954872

11 19-110-002 2 BELT GUARD SEE NOTE

12 18-100-120 2 BACK-PRESSURE REGULATOR FISHER 289H

13 INSTRUMENT 4 ELECTRONIC PRESSURE TRANSMITTER/SWITCH WITH LOCAL DISPLAY, 24VDC ENDRESS/HAUSER FORBERG SCI. CONTACT GAE

14 VALVE 2 SOLENOID SHUT-OFF VALVE, 2 IN NPT,120VAC HONEYWELL V4295A1155 SUPPLYHOUSE.COM

15 VALVE 2 BUTTERFLY, 4 IN, FULL-LUG, EPDM CI BODY BRAY SERIES 31

16 VALVE 2 BALL VALVE, 2 IN NPT, STD. PORT, SS 316 SS APOLLO 76-108-01

17 VALVE 4 BALL VALVE, 2 IN NPT, FULL PORT, SS 316 SS APOLLO 76-108-01

18 VALVE 4 BALL VALVE, 1/4 IN NPT, FULL PORT, SS 316 SS McMASTER-CARR 46495K18

19 PIPE FITTING 4 TEE, BUTT WELD, SCH. 10, 2 IN 304 SS RJ SALES

20 PIPE FITTING 10 LR ELBOW, BUTT WELD, SCH. 10, 2 IN 304 SS RJ SALES

21 PIPE FITTING 2 FLANGE, 4 IN, SLIP-ON 304 SS RJ SALES

22 PIPE FITTING 8 SOCKET-WELD UNION, 2 INCH 304 SS RJ SALES

23 PIPE FITTING 4 COMPRESSION COUPLER FOR 2 IN PIPE STRAUB GRIP-L, EPDM, G20450 GRAINGER 5MTA9

24 PIPE FITTING 4 HALF COUPLING, 1/4 NPT 304 SS McMASTER-CARR 4464K471

25 PIPE FITTING 4 THRED-O-LET 1/2 NPT 304 SS McMASTER-CARR 4565T332

26 PIPE FITTING 2 STREET EL, 1/4 IN 304 SS McMASTER-CARR 4464K36

27 PIPE FITTING 2 COMPRESSION FITTING, 1/4 IN TUBE X 1/4 NPT 316 SS McMASTER-CARR 52245K533

28 PIPE FITTING 3 CLOSE HEX NIPPLE, 1/4 IN 304 SS McMASTER-CARR 4464K721

29 PIPE FITTING 1 PIPE NIPPLE, 1/4 IN X 6 LG 304 SS McMASTER-CARR 4830K138

30 HARDWARE 8 SCREW KNOB, 1/4-20 X 3/4 LG Phenolic McMASTER-CARR 5993K120

31 HARDWARE 8 FLAT WASHER, 1/2 X 1, SAE TYPE B 18-8 McMASTER-CARR 96659A110

32 HARDWARE 2 STRUT CLAMP, 4 IN 304 SS McMASTER-CARR 3115T52

33 HARDWARE 6 STRUT CLAMP, 2 IN 304 SS McMASTER-CARR 3115T47

34 HARDWARE 1 PIPE ROUTING CLAMP, 1/4 INCH, OUTDOOR 304 SS McMASTER-CARR 3249T237

35 TUBING 1 TUBING, 1/4 IN OD, WELDED, 0.035 WALL 304 SS McMASTER-CARR 8989K721

ADDITIONAL REQUIRED FASTENERS

TYPE LENGTH QTY FINISH WHERE USED

5/8-11 STUDS 3.0 32HOT DIPPED GALV. BUTTERFLY VALVES

5/8-11 NUTS 32

3/8-16 HX HD BOLT 1.0 8

HOT DIPPED GALV. MOTOR BASE TO FRAME3/8 WASHER, USS, 1IN OD 8

3/8-16 NUT 8

7/16-14 1.0 8

316 SS BLOWER TO FRAME7/16 LOCK WASHER 8

7/16 FLAT WASHER, SAE 1IN OD 8

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

1 of 41:6

D

3rd ANGLEPROJECTION

SCALE

FORMAT

SHEET #

19-100

PROJECT NO.

TITLE

DRAWING NO.


CHECKED

DESIGNED


NAMEDATE

SEE NOTE

SURFACE TREATMENT

EQUIPMENT LETTER

EQUIPMENT AREA

WEIGHT

MATERIAL

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F


1 of 41:6

D

3rd ANGLEPROJECTION

SCALE

FORMAT

SHEET #


TITLE

DRAWING NO.


CHECKED

DESIGNED


NAMEDATE

SURFACE TREATMENT

EQUIPMENT LETTER

EQUIPMENT AREA

WEIGHT

MATERIAL


BLOWER SKID WITH PIPING

CL 20.50

24.00

30.00

2.00 .75 MIN

74.50

CCW ROT.BOTTOM DISCHARGE

BACK-PRESSURE RECYCLE. PROTECTS BLOWER AND BLOWER MOTOR FROM OVERLOADING IN CASE OF DISCHARGE LINE BLOCKAGE.

MOTOR BASE ADJ.

30.00 48.00

FLANGE FACE

32.00FLANGE FACE

5.00

20.00

AA3

A-A

CAP MANIFOLD,USE 1/4 IN 304 PLATEWELD ALL-AROUND

SEE FIELD PIPING PLAN FOR SUCTION PIPE CONTINUATION

SEE FIELD PIPING PLAN FOR DISCHARGE PIPE CONTINUATION

CAP MANIFOLD,USE 1/4 IN 304 PLATEWELD ALL-AROUND

NOTE THAT MOTORS ARE STAGGERED SO BOTH BLOWER FRAMES HAVE IDENTICAL (LEFT-HAND) SHAFT POSTIIONS


REVISIONS

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

2 of 41:8

D

3rd ANGLEPROJECTION

SCALE

FORMAT

SHEET #

19-100

PROJECT NO.

TITLE

DRAWING NO.


CHECKED

DESIGNED


NAMEDATE

SEE NOTE

SURFACE TREATMENT

EQUIPMENT LETTER

EQUIPMENT AREA

WEIGHT

MATERIAL

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F


2 of 41:8

D

3rd ANGLEPROJECTION

SCALE

FORMAT

SHEET #


TITLE

DRAWING NO.


CHECKED

DESIGNED


NAMEDATE

SURFACE TREATMENT

EQUIPMENT LETTER

EQUIPMENT AREA

WEIGHT

MATERIAL



8.0

11.50

32.00

18.50

74.50

10.50

24.00

66.00

36.50

72.50

16.00

52.00

4.0 4.0 4.0

4.0CUT TO LG

4.0 4.0

4.0

8.0

6.0

8.0

4.0

SECTION A-A

104

104104

108

108

108

106

SCALE 1 : 4

BACK-PRESSURE REGULATOR18-100-120

2 IN FNPT


REVISIONS

BACK PRESSURE REGULATOR / UNLOADING VALVE

MFG. MODEL # DIAPHRAGM SPRING SPRING P/N SPRING RANGE INITIAL SET

FISHER (EMERSON) 289H, 2 IN VITON (FKM) GRAY 1B536627052 0.5 TO 2.25 PSIG 1 PSIG2 IN SCH. 40 PIPE NIPPLES

ITEM # QTYTHREADED ONE END

LENGTH

104 16 4

106 2 6

108 6 8

SCH 10 PIPE, 304L SS

SIZE QTY EST. USAGE



D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

3 of 41:6

D

3rd ANGLEPROJECTION

SCALE

FORMAT

SHEET #

19-100

PROJECT NO.

TITLE

DRAWING NO.


CHECKED

DESIGNED


NAMEDATE

SEE NOTE

SURFACE TREATMENT

EQUIPMENT LETTER

EQUIPMENT AREA

WEIGHT

MATERIAL

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F


3 of 41:6

D

3rd ANGLEPROJECTION

SCALE

FORMAT

SHEET #


TITLE

DRAWING NO.


CHECKED

DESIGNED


NAMEDATE

SURFACE TREATMENT

EQUIPMENT LETTER

EQUIPMENT AREA

WEIGHT

MATERIAL



3.00 3.61

WELD TUBING CLAMP BASETO FRAME PRIOR TO GALVANIZING

34

REMOVE DISCHARGE HEADER ASSEMBLY AT THIS UNION PRIOR TO SHIPPING TO JOB SITE

BELT GUARDS SHOWN IN POSITION

INSTALL TUBE SO DRAIN HAS ABOUT 1/2 INCH OF FALL TOWARDSVALVE


REVISIONS

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

4 of 41:8

D

3rd ANGLEPROJECTION

SCALE

FORMAT

SHEET #

19-100

PROJECT NO.

TITLE

DRAWING NO.


CHECKED

DESIGNED


NAMEDATE

SEE NOTE

SURFACE TREATMENT

EQUIPMENT LETTER

EQUIPMENT AREA

WEIGHT

MATERIAL

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F


4 of 41:8

D

3rd ANGLEPROJECTION

SCALE

FORMAT

SHEET #


TITLE

DRAWING NO.


CHECKED

DESIGNED


NAMEDATE

SURFACE TREATMENT

EQUIPMENT LETTER

EQUIPMENT AREA

WEIGHT

MATERIAL



30.00

62.25

42.00

34.00

20

18

1

2

12

16 7

20

1

36

19

11

513

14

9

10

20

17

17

15

20

3

NOTES

1/4 IN FILLET WELD TYPICAL1.HOT DIP GALVANIZE FRAME ASSEMBLY2.WELD 1/4 INCH TUBE ROUTING CLAMP BASE PLATE TO 3.FRAME BEFORE GALVANIZING. SEE 19-100 FOR PLACEMENT.


REVISIONS


1 2 C3x1.42 34

2 1 C3x1.42 42

3 1 C3x1.42 42

4 2 TS2x2x0.25 30

5 2 TS2x2x0.25 36

6 2 TS2x2x0.25 62.25

7 1 L3x3x0.25 34

8 1 L2x2x0.25 3.25

9 1 L2x2x0.25 3.25

10 1 L2x2x0.25 3

11 1 L2x2x0.25 4

12 1 L2x2x0.25 19

13 1 L2x2x0.25 19

14 1 L2x2x0.25 19

15 1 LS 2.00 x 2.00 x 0.250 49.65

16 1 L2x2x0.25 19

17 2 L2x2x0.25 34

18 4 L2x2x0.25 2

19 8 PADS, 0.75 x 2 x 2

20 8 UNI-STRUT 1-5/8 6

21 1 UNI-STRUT 1-5/8 38

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

FRAME WELDMENT - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

SEE NOTE

259.66 LBS

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


19-110-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 6of1

9/2/19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.1513

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 6of1

9/2/19

D D

B B

A A

E E

F F

19.00

27.75

33.13

0.88 2.75

6.25

3.00

4.00

3.25

12.75

19.25

28.75

34.00

42.00

2.88

9.13

22.88

29.13

1.00

38.00

44.00

STRUT HIDDENFROM VIEW


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

SEE NOTE

259.66 LBS

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


19-110-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 6of2

9/2/19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.1513

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 6of2

9/2/19

D D

B B

A A

E E

F F

34.38

3.00

34.38

3.00

8X 1/4-20 UNC THRU TOP FLANGEBELT GUARD

9.50

9.00

20.25

4.25

9.50

9.00 4.25

7.75

8X 0.50 THRUADJ. MOTOR BASE

0.75

0.75 5.38

3.88

23.88

28.75

6.25

6.25

8X 0.37 THRU7/16-14 UNC THRUBLOWER FOOT PADS 36.00

48.75

1.38

4X 0.63 THRUFOR 1/2 IN. FLOOR ANCHORS BOLT PATTERNS

BOTTOM VIEWBOLT PATTERNS

TOP VIEW


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

SEE NOTE

259.66 LBS

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


19-110-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 6of3

9/2/19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.1513

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 6of3

9/2/19

D D

B B

A A

E E

F F

36.00

48.75

1.38 4X 0.63 THRUFOR 1/2 IN. FLOOR ANCHORS BOLT PATTERNS

BOTTOM VIEWECN REV. DESCRIPTION DATE APPROVED

REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

SEE NOTE

259.66 LBS

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


19-110-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 6of4

9/2/19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.1513

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 6of4

9/2/19

D D

B B

A A

E E

F F

30.00 48.50

60.00°

A

A

6

A-A


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

SEE NOTE

259.66 LBS

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


19-110-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 6of5

9/2/19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.1513

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 6of5

9/2/19

D D

B B

A A

E E

F F

62.25

18.69

15.63

7.688

4.00 4.00

6.00

VIEW A-A

21.00

6.00


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

SEE NOTE

259.66 LBS

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


19-110-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:12 6of6

9/2/19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.1513

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:12 6of6

9/2/19

D D

B B

A A

E E

F F

32.12

13.06

1/8 TO 1/4

INFILL WITH 304 SS FLATTENED EXPANDED METAL (0.05 to 0.07 THK) OR PERFORATED SHEETKEEP SCREEN UP FROM BASE FEET 1/8 TO 1/4 INCHTACK AS REQUIRED

4.50

35.12

3.00

0.625

1

NOTES

MATERIAL: MAKE FROM 304 SS 16 GA SHEET1.1/8 IN FILLET WELD TYPICAL2.PAINT SAFETY YELLOW WITH INDUSTRIAL ENAMEL FOR 3.VISIBILITY / GUARDING


REVISIONS

ITEM NO. QTY. DESCRIPTION LENGTH MATERIAL

1 2 LS 1.50 x 1.50 x 0.125 4.5 304 SS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

BELT GUARD - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

SEE NOTE

12.54 LBS

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


19-110-002

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 2of1

09/07/19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.1513

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 2of1

09/07/19

D D

B B

A A

E E

F F

53.36

4.41 5.82

24.01 5.67 9.01 5.67

45°

1.27

UP 90° R 0.25 UP 90° R 0.25 UP 90° R 0.25 UP 90° R 0.25 UP 90° R 0.25

UP

45°

R 0

.25

UP

45°

R 0

.25

UP

45°

R 0

.25

UP

45°

R 0

.25

FLAT PATTERN

31.50

12.63

8.77

45.0°

SCREEN INFILL FLAT PATTERN


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

BELT GUARD - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

SEE NOTE

12.54 LBS

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


19-110-002

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 2of2

09/07/19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.1513

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 2of2

09/07/19

D D

B B

A A

E E

F F

3.50

5.00

0.19 KEY

0.2810 TO KEY SEAT

8.88

BOTTOM DISCHARGECCW

TOP DISCHARGECW

NOTES:

33 URAI GAS1.HORIZONTAL OIL FILL 16 FL. OZ2.LEFT-HAND INPUT SHAFT3.

12.13

3.81

2.44 1.63

2 INCH FNPT

0.750+-0.0000.001

7.75

7.25

7.63 6.25

5.38


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

ROOTS BLOWER - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

74 LBS

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


19-115

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:6 1of1

08/03/19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NMAST

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO. 1513

33 URAI GASSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:6 1of1

08/03/19

D D

B B

A A

E E

F F

REVISION



T-010 EXTERIOR BIOGAS PIPING T-010 to B-066 & B-066 to In-ground HDPE

SEPT 26, 2019, R0





330-465-9132

BILL OF MATERIALS


10"-SS10-BG-655A PIPE SPOOL, TANK EXTERIOR BIOGAS 1

10"-SS10-BG-655C PIPE SPOOL, TANK EXTERIOR BIOGAS 1


6"-SS10-BG-655B PIPE SPOOL, TANK EXTERIOR BIOGAS 1


4"-SS10-BG-660J PIPE SPOOL, TANK EXTERIOR BIOGAS 1

1900-9000-049 INLINE BIOGAS FILTER ASSEMBLY 1

1900-9000-050 6 INCH TANK RISER SUPPORT BRACE ASSEMBLY 3 21.3125 IN

1900-9000-057 4 INCH PIPE SUPPORT ASSEMBLY 2 66 IN

DRAWING INDEX


T-010 PP-02 TANK EXTERIOR BIOGAS PIPING -

10"-SS10-BG-655A PIPE SPOOL, TANK EXTERIOR BIOGAS -

10"-SS10-BG-655C PIPE SPOOL, TANK EXTERIOR BIOGAS -


6"-SS10-BG-655B PIPE SPOOL, TANK EXTERIOR BIOGAS -


4"-SS10-BG-660J PIPE SPOOL, TANK EXTERIOR BIOGAS -

1900-9000-049 INLINE BIOGAS FILTER ASSEMBLY -

1900-9000-049-001 INLINE BIOGAS FILTER TUBE -

1900-9000-041-002 INLINE BIOGAS FILTER LOWER CAP -

1900-9000-050 6 INCH TANK RISER SUPPORT BRACE ASSEMBLY -

1900-9000-050-001 6 INCH TANK RISER SUPPORT BRACKET -


1900-9000-050-003 6 INCH TANK RISER SUPPORT CLAMP -

1900-9000-055 FLANGE WELDING STANDARD DETAIL -

1900-9000-057 4 INCH PIPE SUPPORT ASSEMBLY - 1900-9000-006-001 PIPE SUPPORT BASE WELDMENT - 1900-9000-057-002 4 INCH PIPE SUPPORT UPPER WELDMENT -

1900-9000-057-003 4 INCH PIPE SUPPORT PIPE STRAP -

48.00 66.00

10"-SS10-BG-655C

PSV-65B

PSV-65A

10"-SS10-BG-655A

6"-SS10-BG-655B

4"-SS10-BG-660A

4"-SS10-BG-660J

S-066 FILTER/DEMISTER1900-9000-049 - INLINE BIOGAS FILTER ASSEMBLY

6" HDPE BIOGAS PIPE CONTINUES IN-GROUND TO FLARE HEADERSEE G-005/G-005B FOR CONTINUATION

2" HDPE CONDENSATE DRAIN PIPE CONTINUES IN-GROUND TO T-013SEE G-005C FOR CONTINUATION

BLOWER SKID CONDENSATE DRAINS CONNECTED TO THE 2" HDPE CONDENSATE DRAIN PIPE IN THIS AREA. CONTINUES IN-GROUND TO T-013SEE G-005C FOR CONTINUATION

WOOSTER WRRF EFFLUENT STORAGE TANK T-010NORTH ELEVATION

6"-SS10-BG-655A

1900-9000-0506 IN PIPE SUPPORT BRACE

B-066 BLOWER SKIDDISCHARGE HEADER PIPING TIE POINT

B-066 BLOWER SKIDSUCTION HEADER PIPING TIE POINT

1900-9000-0574 IN PIPE SUPPORT

2" HDPE CONDENSATE DRAIN PIPE CONTINUES IN-GROUND TO T-013SEE G-005C FOR CONTINUATION

S-066 FILTER/DEMISTER1900-9000-049 - INLINE BIOGAS FILTER ASSEMBLY

6"-SS10-BG-655B

4"-SS10-BG-660A

4"-SS10-BG-660J

6" HDPE BIOGAS PIPE CONTINUES IN-GROUND TO FLARE HEADERSEE G-005/G-005B FOR CONTINUATION

6"-SS10-BG-655A

1900-9000-0506 IN PIPE SUPPORT BRACE


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

BIOGAS EXTERIOR PIPING - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


T-010 PP-02

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:128 1of1

09/19/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

T-010 PP-02

STAINLESS TO B-066SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:128 1of1

09/19/2019

D D

B B

A A

E E

F F

12.75

8.75

15.76

42.50

4.25

7

4

6

5

1

2

3

8

NOTES:

ITEM 7, PRESSURE/VACUUM RELIEF VALVE, PROVIDED BY OTHERS1.ITEM 8, BUTTERFLY VALVE, PROVIDED BY OTHERS2.LABEL ALL LOOSE PIPE COMPONENTS WITH SPOOL NUMBER PRIOR TO 3.SHIPMENT. USE METAL TAG AND WIRE THROUGH FLANGE BOLT HOLE.FLANGE BOLTS AND GASKETS PROVIDED BY OTHERS.4.SEE STD. DETAIL FOR FLANGE WELDING5.


REVISIONS


1 1 PIPE, 10 IN, SCH 10, SS 4

2 1 PIPE, 10 IN, SCH 10, SS 42

3 1 TEE - 10 IN - SCH10 - BUTT WELD, 304 SS

4 1 REDUCER, 10X6 IN, SCH 10, SS

5 4 FLANGE, 10 IN, FLAT, 1/2" THICK, 304 SS


7 1 GROTH 1200A-10-115-T0Z PRESSURE/VACUUM RELEIF VALVE

8 1 BUTTERFLY, 6 IN

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

CUSTOMER NAME PROJECT NO. CITY OF WOOSTER

10-SS10-BG-655A

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:32 1of1

09/19/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO. CITY OF WOOSTER

10-SS10-BG-655A

TANK PSV-65ASHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:32 1of1

09/19/2019

D D

B B

A A

E E

F F

12.75

8.75

15.76

42.50

4.25

A

10

4

6

5

1

3

2

0.50

DETAIL ASCALE 1 : 8

7

8

91/4

NOTES:

ITEM 7 & 8, BUTTERFLY VALVE, PROVIDED BY OTHERS1.ITEM 9, PRESSURE/VACUUM RELIEF VALVE, PROVIDED BY OTHERS2.LABEL ALL LOOSE PIPE COMPONENTS WITH SPOOL NUMBER PRIOR TO 3.SHIPMENT. USE METAL TAG AND WIRE THROUGH FLANGE BOLT HOLE.FLANGE BOLTS AND GASKETS PROVIDED BY OTHERS.4.SEE STD. DETAIL FOR FLANGE WELDING5.


REVISIONS


1 1 PIPE, 10 IN, SCH 10, SS 4

2 1 PIPE, 10 IN, SCH 10, SS 42






8 1 HALF COUPLING, 3/4 NPT, 304 SS

9 1 HEX HEAD PLUG, 3/4 NPT, 304 SS

10 1 GROTH 1200A-10-115-T0Z PRESSURE/VACUUM RELEIF VALVE

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


10-SS10-BG-655C

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:32 1of1

09/19/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


10-SS10-BG-655C

TANK PSV-65BSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:32 1of1

09/19/2019

D D

B B

A A

E E

F F

5.25 18.00

30.78

15.00

18.00

329.06

7.13

47.63

11.64

58.00

174.00

56.5

40.50

252.50

32.50TO TANK

PLATFORM

THIS FLANGE TO BE FIELD WELDEDSO UPPER PIPE WELDMENTCAN BE ROUTED BEHIND TANK PLATFORM

9

4

6

5

3

7

2

1

10

8

NOTES:

ITEM 8, BUTTERFLY VALVE, PROVIDED BY OTHERS1.ITEM 9, EXPANSION JOINT, PROVIDED BY OTHER2.LABEL ALL LOOSE PIPE COMPONENTS WITH SPOOL NUMBER PRIOR TO 3.SHIPMENT. USE METAL TAG AND WIRE THROUGH FLANGE BOLT HOLE.FLANGE BOLTS AND GASKETS PROVIDED BY OTHERS.4.SEE STD. DETAIL FOR FLANGE WELDING5.


REVISIONS


1 2 PIPE, 6 IN, SCH 10, SS 5

2 2 PIPE, 6 IN, SCH 10, SS 18

3 1 PIPE, 6 IN, SCH 10, SS 15

4 1 PIPE, 6 IN, SCH 10, SS 252

5 1 PIPE, 6 IN, SCH 10, SS 40

6 6 PIPE FLANGE

7 4 ELL - 45 - 6 IN - SCH10 - BUTT WELD

8 1 BUTTERFLY, 6 IN

9 1 MSOEE0600 EXP. JOINT, 1 SPHERE, 6 IN, EPDM (METRASPHERE)

10 3 1900-9000-050 6 INCH TANK RISER SUPPORT BRACE

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


6-SS10-BG-655A

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:64 1of1

09/19/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


6-SS10-BG-655A

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:64 1of1

09/19/2019

D D

B B

A A

E E

F F

24.25

11.24 0.25

5.62 5.50

9.00

1.00 13.57

7

1/4

5

9

8

6

2

4

1

3

20.12

NOTES:

LABEL ALL LOOSE PIPE COMPONENTS WITH SPOOL NUMBER PRIOR TO 1.SHIPMENT. USE METAL TAG AND WIRE THROUGH FLANGE BOLT HOLE.FLANGE BOLTS AND GASKETS PROVIDED BY OTHERS.2.SEE STD. DETAIL FOR FLANGE WELDING3.


REVISIONS


1 1 PIPE, 6 IN, SCH 10, SS 24

2 2 PIPE, 6 IN, SCH 10, SS 5.5



5 1 ELL - LR90 - 6 IN - SCH10 - BUTT WELD

6 1 PIPE CAP - 6.625" OD x 3" ID x 1/4" THK, 304 SS

7 1 HALF COUPLING, 2 NPT, 304 SS

8 2 PIPE NIPPLE, 2 NPT, 304 SS 6

9 1 UNION, 2 NPT, 304 SS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


6-SS10-BG-655B

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:12 1of1

09/19/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

6-SS10-BG-655B

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:12 1of1

09/19/2019

D D

B B

A A

E E

F F

0.50

6.25

6.00 6.00

86.50

6.00

23.94

8.00

6.00

54.00

6.00

98.50

6.00

15.63 21.63

66.00

7 8

6

9

4

1

5

3

2

66.00

58.00

NOTES:



REVISIONS


1 1 1900-9000-049 INLINE BIOGAS FILTER

2 2 1900-9000-057 4IN PIPE SUPPORT ASSEMBLY





7 1 PIPE, 4 IN, SCH 10, SS 54

8 1 PIPE, 4 IN, SCH 10, SS 86.5

9 1 PIPE, 4 IN, SCH 10, SS 15.375

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


4-SS10-BG-660A

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:36 1of1

09/19/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

4-SS10-BG-660A

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:36 1of1

09/19/2019

D D

B B

A A

E E

F F

40.00 44.00

94.00 30.00

124.00

4.00

5.75

29.75

1.75

4.00 114.00 6.00

6.00

12.00

6.00

8 2 11 10 12

7

5

1

6

4

9

3

8

24.00

12.50

5.50

6.00

NOTES:

ITEM 11, INSERTION FLOW METER, PROVIDED BY OTHERS1.LABEL ALL LOOSE PIPE COMPONENTS WITH SPOOL NUMBER PRIOR TO 2.SHIPMENT. USE METAL TAG AND WIRE THROUGH FLANGE BOLT HOLE.FLANGE BOLTS AND GASKETS PROVIDED BY OTHERS.3.SEE STD. DETAIL FOR FLANGE WELDING4.


REVISIONS


1 1 PIPE, 4 IN, SCH 10, SS 1.5

2 1 PIPE, 4 IN, SCH 10, SS 114

3 1 PIPE, 4 IN, SCH 10, SS 12

4 1 PIPE, 6 IN, SCH 10, SS 12.25



7 1 ELL - SR90 - 4 IN - SCH10 - BUTT WELD



10 1 THREAD-O-LET, 1 NPT, 304 SS

11 1 E&H PROLINE T-MASS 65I FLOWMETER, 1" MNPT

12 2 STRUT CLAMP, 4 IN, 304 SS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


4-SS10-BG-660J

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:24 1of1

09/19/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

4-SS10-BG-660J

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:24 1of1

09/19/2019

D D

B B

A A

E E

F F

A

A

6.00

14.50

7.88

4.75

10.13DEMISTER PAD O.D.

10.25

26.51

SECTION A-A

6

4

2

75

3

1

9

108


REVISIONS

ITEM NO. QTY. NUMBER DESCRIPTION DESCRIPTION21 1 1900-9000-049-001 INLINE BIOGAS FILTER TUBE2 1 1900-9000-041-002 INLINE BIOGAS FILTER LOWER CAP

3 1 Ø10.125"X6" DEMISTER PAD AMACS KNITTED WIRE MESH DEMISTER PAD

NO GRIDS, COILED. STYLE TM-1109, 304 SS, SEG. 1

4 1 FILTER FILTER ELEMENT SOLBERG 335P5 2 FITTING REDUCER - 10X6 FERNCO6 1 HARDWARE THREADED STUD 1/4-20, 18" LENGTH, S.S.7 4 HARDWARE HEX NUT 1/4-20, S.S.8 1 GASKET FULL FACE GASKET 8", ANSI CLASS 150, EPDM9 8 HARDWARE HEX BOLT 3/4-10X2.75X1.75, S.S.10 8 HARDWARE HEX BOLT 3/4-10, S.S.

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

INLINE BIOGAS FILTER - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-049

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 1of1

08/06/2019

08/06/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

ASSEMBLYSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 1of1

08/06/2019

08/06/2019

D D

B B

A A

E E

F F

1.00

4.75

0.50

0.28125

13.50

120.00° 120.00°

8X 0.875 THRUEQUALLY SPACED

11.75 B.C.

AA

19.00

0.25

10.25 O.D.

SECTION A-A

TUBE SEAM FULLY WELDED

CAP JOINT WELDED ALL AROUND

31.91

19.00

TUBE FLAT PATTERN

NOTE:ROLL FILTER TUBE FROM SHEET FLAT PATTERN AND ADD CAP.FULLY WELD ALL SEAMS SO FINAL FILTER ASSEMBLY IS GAS TIGHT.


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

14 GA. 304 S.S.

22.06 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-049-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 1of1

08/06/2019

08/06/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

TUBESHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 1of1

08/06/2019

08/06/2019

D D

B B

A A

E E

F F

7.875

0.28125


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

14 GA. 304 S.S.

1.05 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-041-002

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:2 1of1

08/06/2019

08/06/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

LOWER CAPSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:2 1of1

08/06/2019

08/06/2019

D D

B B

A A

E E

F F

21.3125

THIS END BOLTED TO TANK WALLUSING TANK HARDWARE AND SEALANTAS SPECIFIED BY TANK MANUFACTURER

4

2 1

3 5



REVISIONS

ITEM NO. QTY. NUMBER DESCRIPTION DESCRIPTION21 1 1900-9000-050-001 6 INCH TANK RISER SUPPORT BRACKET2 1 1900-9000-050-002 6 INCH TANK RISER SUPPORT BRACKET3 1 1900-9000-050-003 6 INCH TANK RISER SUPPORT CLAMP4 4 HARDWARE HEX BOLT 1/2-13X1.75X1.75, HOT-DIPPED GALV.5 4 HARDWARE HEX NUT 1/2-13, HOT-DIPPED GALV.

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

6 INCH TANK RISER - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

HOT-DIP GALV.

9.87 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-050

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 1of1

09/18/2019

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

SUPPORT BRACE ASSEMBLYSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 1of1

09/18/2019

09/18/2019

D D

B B

A A

E E

F F

3.00

3.00

3.00

14.50

6.625

0.3125

0.1875

12.00

1.375

R0.2813

1.00 1.50

2.625

0.625

2.00

R0.2813

8.00

0.625

2.625

1.00

1.375

2.50

0.1875

0.1875

2.50


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

HOT-DIP GALV.

4.50 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-050-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 1of1

09/18/2019

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

SUPPORT BRACKETSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 1of1

09/18/2019

09/18/2019

D D

B B

A A

E E

F F

14.50

6.625

0.3125

0.1875

9.00

0.5625 TYP.

1.00 TYP.

1.50

3.00

3.00

1.00

2.00

1.00 9.00 0.5625

2.00

2.00

0.1875

0.1875

1.00


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

HOT-DIP GALV.

3.47 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-050-002

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 1of1

09/18/2019

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 1of1

09/18/2019

09/18/2019

D D

B B

A A

E E

F F

14.50

6.625

0.3125

0.1875

2.00

1.00 9.00 0.5625


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

HOT-DIP GALV.

1.80 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-050-003

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 1of1

09/18/2019

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

SUPPORT CLAMPSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 1of1

09/18/2019

09/18/2019

D D

B B

A A

E E

F F

X° X°

A

A



0.25


SECTION A-A

1/4

1/4

X° X°

B

B



0.50

0.25


SECTION B-B

1/4


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-055

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 1of1

09/20/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-055


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 1of1

09/20/2019

D D

B B

A A

E E

F F

66.00

A

A

4

2

5

1

3

60.00

63.75

53.63

0.203

2.88

SECTION A-ANOTE:2-1/2" SCH 40 EXTENSION PIPE SHOULD BE FIELD CUT TO LENGTHSO THE UPPER AND LOWER PIPE SUPPORTS CAN BE POSITIONED,TACKED IN PLACE AND THEN FIELD WELDED. PAINT FIELD WELDED ASSEMBLY WITH INDUSTRIAL ENAMEL, BLACK


REVISIONS

ITEM NO. QTY. NUMBER DESCRIPTION DESCRIPTION21 1 1900-9000-006-001 PIPE SUPPORT BASE WELDMENT2 1 1900-9000-057-002 4 IN PIPE SUPPORT UPPER WELDMENT3 1 1900-9000-057-003 4 IN PIPE SUPPORT PIPE STRAP4 2 HARDWARE HEX BOLT 1/2-13X2.25X2.25, GALV.5 2 HARDWARE HEX NUT 1/2-13, GALV.

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

4 IN PIPE - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-057

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:12 1of1

09/25/2019

09/25/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-057


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:12 1of1

09/25/2019

09/25/2019

D D

B B

A A

E E

F F

8.00

0.300

8.00

6.00 0.75

3.50

6.00

AA

0.38

3.50

2.00

2.90

SECTION A-A

BASE PLATE



REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-006-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:2 1of1

14FEB19

14FEB19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-006-001


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:2 1of1

14FEB19

14FEB19

D D

B B

A A

E E

F F

7.00 0.5625

4.00

8.50

AA

3.50

12.00

0.25

8.50

0.38

4.50

R0.25

10.21

0.30

2.90

SECTION A-A

PIPE SADDLE STRAP



REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

4 IN PIPE SUPPORT - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

11.14 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-057-002

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:3 1of1

09/25/2019

09/25/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:3 1of1

09/25/2019

09/25/2019

D D

B B

A A

E E

F F

4.500

R0.25 TYP.

0.38

0.25

8.50

4.00

0.5625

7.00


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

4 IN PIPE SUPPORT - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

2.82 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-057-003

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:2 1of1

09/25/2019

09/25/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

PIPE STRAPSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:2 1of1

09/25/2019

09/25/2019

D D

B B

A A

E E

F F

REVISION



TANK INTERIOR PIPING SHOP DRAWINGS

SEPT 26, 2019, R0





330-465-9132

BILL OF MATERIAL


6"-DI-SL-621A PIPE SPOOL, TANK INTERIOR PRESSURE 1

6"-DI-SL-681A PIPE SPOOL, TANK INTERIOR PRESSURE 1

8"-SS10-SL-650A2 PIPE SPOOL, TANK STANDPIPE 1

1900-9000-051 8 INCH TANK RISER SUPPORT 3 21.3125 IN

1900-9000-052 PIPE SPOOL, TANK DRAINAGE DOWNLEG 1

1900-9000-053 WELDMENT, TANK DRAINAGE SUMP MARKER 1

1900-9000-056 6 INCH PIPE SUPPORT 12 41 IN

DRAWING INDEX


T-010 PP-03 TANK INTERIOR PIPING -

6"-DI-SL-621A PIPE SPOOL, TANK INTERIOR PRESSURE -

6"-DI-SL-681A PIPE SPOOL, TANK INTERIOR PRESSURE -

8"-SS10-SL-650A2 PIPE SPOOL, TANK STANDPIPE -

1513-5009-031 TANK STANDPIPE 8" NOZZLE WELDMENT -

1900-9000-051 8 INCH TANK RISER SUPPORT -



1900-9000-051-003 8 INCH TANK RISER SUPPORT CLAMP - 1900-9000-052 PIPE SPOOL, TANK DRAINAGE DOWNLEG -

1900-9000-053 WELDMENT, TANK DRAINAGE SUMP MARKER - 1900-9000-055 FLANGE WELDING STANDARD DETAIL -

1900-9000-056 6 INCH PIPE SUPPORT -

1900-9000-006-001 PIPE SUPPORT, BASE WELDMENT -

1900-9000-056-002 PIPE SUPPORT, UPPER WELDMENT -

1900-9000-056-003 PIPE SUPPORT, PIPE STRAP -

6"-DI-SL-681AINSTALLED IN TANK FOR PIPING FROM P-023 PIT TRANSFER PUMP IN FUTURE TRUCK LOAD-OUT BUILDING

6"-DI-SL-621AP-009 EFFLUENT PUMP PRESSURE PIPING

1900-9000-053TANK DRAINAGE SUMP MARKER

1900-9000-052TANK DRAINAGE CLEANOUT DOWNLEG

8"-SS10-SL-650A2P-020 TRUCK LOAD/MIXING PUMP PRESSURE STANDPIPE

WOOSTER WRRF EFFLUENT STORAGE TANK T-010TOP VIEW (ROOF HIDDEN)


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

TANK INTERIOR PIPING - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


T-010 PP-03

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:128 1of1

09/19/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

T-010 PP-03

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:128 1of1

09/19/2019

D D

B B

A A

E E

F F

240.00 240.00 240.00

126.00 63.25 114.00 126.00 114.00 126.00

720.00

41.00

1

2

NOTES:

LABEL ALL LOOSE PIPE COMPONENTS WITH SPOOL NUMBER PRIOR TO 1.SHIPMENT. USE METAL TAG AND WIRE THROUGH FLANGE BOLT HOLE.FLANGE BOLTS AND GASKETS PROVIDED BY OTHERS.2.


REVISIONS


1 3 PIPE, 6 IN, DI FLANGED 240

2 6 1900-9000-056 6IN DI PIPE SUPPORT ASSEMBLY 41

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


6"-DI-SL-621A

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:64 1of1

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

6"-DI-SL-621A

TANK INTERIORSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:64 1of1

09/18/2019

D D

B B

A A

E E

F F

240.00 240.00 240.00

126.00 63.25 114.00 126.00 114.00 126.00

720.00

41.00

1

2

NOTES:



REVISIONS


1 3 PIPE, 6 IN, DI FLANGED 240

2 6 1900-9000-056 6IN DI PIPE SUPPORT ASSEMBLY 41

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


6"-DI-SL-681A

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:64 1of1

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

6"-DI-SL-681A

TANK INTERIORSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:64 1of1

09/18/2019

D D

B B

A A

E E

F F

264.25

252.25

15.00

3.00

57.50

45.50 12.00 12.00

68.50 174.00 58.00

12.25

24.25

36.50

2 8

3

4

5

1

4

7

6

NOTES:



REVISIONS


1 1 PIPE, 8 IN, SCH 10, SS 2.752 1 PIPE, 8 IN, SCH 10, SS 2523 1 PIPE, 8 IN, SCH 10, SS 45.254 2 ELL - LR - 8 IN - SCH10 - BUTT WELD5 3 FLANGE, 8 IN, SLIP-ON, 150#, 304 SS6 2 FLANGE, 8 IN, FLAT, 1/2" THICK, 304 SS7 1 1513-5009-031 TANK STANDPIPE 8" NOZZLE 248 3 1900-9000-051 8 INCH TANK RISER SUPPORT BRACE ASSEMBLY

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

CUSTOMER NAME PROJECT NO.1513 CITY OF WOOSTER

8-SS10-SL-650A2

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:32 1of1

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


8-SS10-SL-650A2

TANK STANDPIPESHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:32 1of1

09/18/2019

D D

B B

A A

E E

F F

A

A

24.00

8.625 6.625

0.134

SECTION A-A

NOTES:

ROLL CONE & FULLY WELD SEAM1.


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

TANK STANDPIPE - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

10 GA. 304 SS

21.83 LBS

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1513-5009-031

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 2of1

09/25/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

8" NOZZLE WELDMENTSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 2of1

09/25/2019

D D

B B

A A

E E

F F

24.68

26.54

TANK STANDPIPE NOZZLE FLAT PATTERN

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

TANK STANDPIPE - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

10 GA. 304 SS

21.83 LBS

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1513-5009-031

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 2of2

09/25/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

8" NOZZLE WELDMENTSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 2of2

09/25/2019

D D

B B

A A

E E

F F

21.3125


4

2 1

35



REVISIONS

ITEM NO. QTY. NUMBER DESCRIPTION DESCRIPTION21 1 1900-9000-051-001 8 INCH TANK RISER SUPPORT BRACKET2 1 1900-9000-051-002 8 INCH TANK RISER SUPPORT BRACKET3 1 1900-9000-051-003 8 INCH TANK RISER SUPPORT CLAMP

4 4 HARDWARE HEX BOLT 1/2-13X1.75X1.75, HOT-DIPPED GALV.

5 4 HARDWARE HEX BOLT 1/2-13, HOT-DIPPED GALV.

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

10.85 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-051

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 1of1

09/18/2019

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

HOT-DIP GALV.

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

SUPPORT BRACE ASSEMBLYSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 1of1

09/18/2019

09/18/2019

D D

B B

A A

E E

F F

16.50

8.625

0.3125

0.1875

12.00

1.375

0.5625 TYP.

1.00 TYP.

1.50

3.00

3.00

3.00

2.00

0.5625 10.00

1.00

0.625

2.625 2.625

0.625

2.50

2.50

0.1875

0.1875

1.375


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

HOT-DIP GALV.

4.83 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-051-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 1of1

09/18/2019

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 1of1

09/18/2019

09/18/2019

D D

B B

A A

E E

F F

1.00

16.50

8.625

0.3125

0.1875

9.00

0.5625 TYP.

1.00 TYP. 1.50

3.00

3.00

2.00

0.5625 11.00

1.00

2.00

0.1875

0.1875

2.00

1.00


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

HOT-DIP GALV.

3.79 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-051-002

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 1of1

09/18/2019

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 1of1

09/18/2019

09/18/2019

D D

B B

A A

E E

F F

16.50

8.625

0.3125

0.1875

2.00

0.5625 11.00

1.00


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

HOT-DIP GALV.

2.13 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-051-003

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 1of1

09/18/2019

09/18/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

SUPPORT CLAMPSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 1of1

09/18/2019

09/18/2019

D D

B B

A A

E E

F F

28.48

AA

12.73 16.04 16.50

CLEANOUT PORTTO TANK FLOOR

0.46

5

4

2

1

3

3

2.00

2.25

0.25

22.48 6.00

10.50

SECTION A-A

7/16

1/4

NOTES:



REVISIONS


1 1 FLANGE, 6 IN, SLIP-ON, 150#, 304 SS

2 1 PIPE, 6 IN, SCH 40, 304 SS 2

3 2 ELL, 6 IN, 45 DEG, BUTT WELD, SCH 40, 304 SS

4 1 PIPE, 6 IN, SCH 40, 304 SS 10.5

5 1 PIPE, 6 IN, SCH 40, 304 SS 6

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-052

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 1of1

09/20/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-052

TANK DRAINAGE DOWNLEG SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 1of1

09/20/2019

D D

B B

A A

E E

F F

8.00

8.00

0.75

6.00

6.00

0.30

3.50

2.88

AA

0.38

2.00

60.00 61.88

2.88

3.50

0.203

0.30

SECTION A-A

1

3

2

NOTES:

LABEL ALL LOOSE PIPE COMPONENTS WITH SPOOL NUMBER PRIOR TO 1.SHIPMENT. USE METAL TAG AND WIRE THROUGH FLANGE BOLT HOLE.PAINT WELDMENT SAFETY YELLOW FOR VISIBILITY. 2.


REVISIONS

ITEM NO. NUMBER DESCRIPTION DESCRIPTION2 QTY.

1 1900-9000-006-001 PIPE SUPPORT BASE WELDMENT 1

2 PIPE 2-1/2" SCH 40 60" LENGTH 1

3 PIPE FITTING CAP, 2 1/2 IN, SCH 40, CS 1

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

TANK DRAINAGE SUMP - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-053

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:12 1of1

09/20/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-053

MARKER WELDMENTSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:12 1of1

09/20/2019

D D

B B

A A

E E

F F

X° X°

A

A



0.25


SECTION A-A

1/4

1/4

X° X°

B

B



0.50

0.25


SECTION B-B

1/4


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-055

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:4 1of1

09/20/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-055


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:4 1of1

09/20/2019

D D

B B

A A

E E

F F

41.00

A

A

4

5

2

6

3

1

2.88

0.203

36.00 37.55 28.63

SECTION A-A


REVISIONS

ITEM NO. QTY. NUMBER DESCRIPTION DESCRIPTION21 1 1900-9000-006-001 PIPE SUPPORT BASE WELDMENT2 1 1900-9000-056-002 6IN DI PIPE SUPPORT UPPER WELDMENT3 1 1900-9000-056-003 6" DI PIPE SUPPORT PIPE STRAP

4 2 HARDWARE HEX BOLT 1/2-13X2.25X2.25, GALV.

5 2 HARDWARE HEX BOLT 1/2-13, GALV.6 1 PIPE 2-1/2" SCH 40 PIPE 36" LENGTH

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

6IN DI PIPE - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

HOT-DIP GALVANIZED

39.94 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-056

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:8 1of1

09/25/2019

09/25/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:8 1of1

09/25/2019

09/25/2019

D D

B B

A A

E E

F F

8.00

0.300

8.00

6.00 0.75

3.50

6.00

AA

0.38

3.50

2.00

2.90

SECTION A-A

BASE PLATE



REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-006-001

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:2 1of1

14FEB19

14FEB19


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

1900-9000-006-001


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:2 1of1

14FEB19

14FEB19

D D

B B

A A

E E

F F

4.00

8.50 0.5625

10.00

AA

3.50

12.00

0.25

0.50

R0.25

2.90 0.30

6.900

8.74

SECTION A-A

PIPE SADDLE STRAP



REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

6IN DI PIPE SUPPORT - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

10.76 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-056-002

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:3 1of1

09/25/2019

09/25/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.


FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:3 1of1

09/25/2019

09/25/2019

D D

B B

A A

E E

F F

0.25

6.900

R0.25 TYP.

0.50

10.00

4.00

0.5625

8.50


REVISIONS

CC

12345678

8 7 6 5 4 3 2 1

12345678

7 6 5 4 3

6" DI PIPE SUPPORT - NOTICE -The drawing and information contained within this document are the sole property of GAE LLC and may not be copied or transferred without the written consent of GAE LLC. The recipient of this document must use the information provided exclusively for reasons beneficial and in no way detrimental to GAE LLC. The receiver shall return this document after the completion of its use or upon request, either written or verbal. Any violation of these terms may result in legal action submitted in a court of law. All rights reserved.

MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

MILD STEEL

3.56 LBS

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE


1900-9000-056-003

SHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

1:2 1of1

09/25/2019

09/25/2019


MATERIAL

WEIGHT

EQUIPMENT AREA

EQUIPMENT LETTER

SURFACE TREATMENT

NM

BR

DATE NAME


DESIGNED

CHECKED


DRAWING NO.

TITLE

PROJECT NO.

PIPE STRAPSHEET #

FORMAT

SCALE

3rd ANGLEPROJECTION

B

1:2 1of1

09/25/2019

09/25/2019

D D

B B

A A

E E

F F

SLUDGE STORAGE TANK BID FORM - CONTRACT A ODOT UNIT … · 2019. 10. 7. · 4 1 flange, 6 in, mj...

Documents

Transcript of SLUDGE STORAGE TANK BID FORM - CONTRACT A ODOT UNIT … · 2019. 10. 7. · 4 1 flange, 6 in, mj...