For over 30 years, Testing Machines, Inc. has had a history of producing reliable, accurate and robust testing instruments for measuring coefficient of friction. The model 32-07 is our latest design offering advanced features for measuring and automatically calculating static and kinetic coefficient of friction. The Slip and Friction Tester is designed to measure the sliding resistance of sheet like materials including plastic film, packaging film laminates, paper, paperboard and coated surfaces.

Slip and friction testing aids in the evaluation of chemicals and additives used to create or minimize the degree of friction between two contacting test specimens.

SPECIFICATIONSSelectable speed from 5 to 50.8 cm per minute

(2 to 20 in per minute)Selectable travel distance from 2.5 to 30.5 cm

(1 to 12 in.)Load cell: 10 newtons (1 kg, 2.2 lbs)Meets TAPPI T816, T549, and ASTM D1894

▪

▪

▪▪

FEATURESDigital display, storage and editing of up to 100 readings,

and selectable units (COF or grams)Settable limitsStatistics-average, standard deviation, high/low results.Report printout with built in printerRS-232 outputStatic/kinetic coefficient of friction calculated in one operationDirect drive arm with unique skid controlSled-connecting mechanism ensures level pulling actionEasily interchangeable sleds.Large 5.7 inch color display shows all results and settings Intuitive result data in color allows operator to easily read

pertinent result informationIncludes calibration fixtureOptional heated platen available (ambient to 375° F)

APPLICATIONSPaper, Flexible Packaging, Foils, Rubber, Plastics, Wood, Linoleum, Metal, Printing, Coatings, Composites

▪

▪▪▪▪▪▪▪▪▪▪

▪▪

Slip and Friction TesterModel 32-07

Compatible with

Exclusively from TMI

Capture test results, analyze and plot data and transfer directly to

Excel®, Access®, or clipboard.

AVAILABLE SLEDS32-06-01 5.0 in x 5.0 in 2 lb to 5 lb (selectable) in ½ lb increments32-06-02 2.5 in x 2.5 in 200 g; ASTM D 1894 for Plastic Films 32-06-03 2.5 in x 2.5 in 3 lb; TAPPI T 81632-76-02 2.5 in x 2.5 in with magnetic sample retention 200 g; ASTM D 1894 / ISO 8295 for Plastic Films

Rev. 09/25/2015

Set up screen for entering sample parameters Intuitive software design and touch panel

Slip and Friction TesterModel 32-07

SPECIFICATIONSModel 32-07-00-0001

Speed range 5 to 50.8 cm per minute (2 to 20 in per minute)

Travel distance 2.5 to 30.5 cm (1 to 12 in)

Load cell 10 newtons (1 kg, 2.2 lb)

Electrical Specify voltage requirements when ordering

Available sleds

32-06-01 5.0 in x 5.0 in; 2 lb to 5 lb (selectable) in ½ lb increments32-06-02 2.5inx2.5in;200g;ASTMD1894forPlasticFilms 32-06-03 2.5 in x 2.5 in; 3 lb; TAPPI T 81632-76-02 2.5inx2.5inwithmagneticsampleretention;200g; ASTMD1894/ISO8295forPlasticFilms

Available accessories 32-07-10 Weight set (includes nine pcs. class 6 weights ranging from 10 g -1000 g)

INSTRUMENT SIZE

Dimensions (W x D x H) 679 mm x 502 mm x 406 mm (26.75 in x 19.75 in x 16 in)

Weight (approx.) 25 kg (55 lb)

STANDARDS

TAPPI T549 CoefficientsofStaticandKineticFrictionofUncoatedWritingandPrintingPaperbyuseoftheHorizontal Plane Method

TAPPI T816 CoefficientofStaticFrictionofCorrugatedandSolidFiberboard(HorizontalPlaneMethod)

ASTM D1894 StandardTestMethodforStaticandKineticCoefficientsofFrictionofPlasticFilmandSheeting

ISO 8295 CoefficientofFrictionofPlastics,FilmandSheeting

OTHER MODELS AVAILABLE

32-07-00-0005 Slip and Friction Tester with Vishay load cell reading 0-1500 gram

32-25-00 InclinePlaneCoefficientofFrictionTester(MeetsTAPPIT-815andASTMD202withoptionalblocks)