Slimline CW & WW Series - Farnell element14 Slimline CW & WW COB Series Use anual 2 Safety advice...
Transcript of Slimline CW & WW Series - Farnell element14 Slimline CW & WW COB Series Use anual 2 Safety advice...
Order codes: LEDJ61 - 1CW20 Black housing
LEDJ61A - 1CW20 White housingLEDJ62 - 1WW20 Black housing
LEDJ62A - 1WW20 White housing
Slimline CW & WW Series 1 x 20W COB LED
User Manual
Optional IR remoteOrder ref: LEDJ90E
Convection cooled, no fan!
White housing versions
www.prolight.co.uk Slimline CW & WW COB Series User Manual 2
Safety advice
WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessaryfortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodificationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.
OPERATING DETERMINATIONSIfthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageandthewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
• Neverletthepowercablecomeintocontactwithothercables.Handlethepowercableandallmainsvoltageconnectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoflammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhenequipmentisnotinuseorbeforecleaning!Onlyhandlethepower-cablebytheplug.Neverpullouttheplugbypullingthepower-cable.
• Makesurethattheavailablevoltageisbetween100~240V,50/60Hz.
• Makesurethatthepowercableisnevercrimpedordamaged.Checktheequipmentandthepowercableperiodically.
• Iftheequipmentisdroppedordamaged,disconnectthemainspowersupplyimmediatelyandhaveaqualifiedengineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastictemperaturefluctuation(e.g.aftertransportation),donotconnectpowerorswitchitonimmediately.Thearisingcondensationmightdamagetheequipment.Leavetheequipmentswitchedoffuntilithasreachedroomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuseimmediately.Packtheunitsecurely(preferablyintheoriginalpackingmaterial),andreturnittoyourProLightdealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybecarriedoutbyaqualifiedtechnician.THISUNITCONTAINSNOUSERSERVICEABLEPARTS.
• WARRANTY:Oneyearfromdateofpurchase.
CAUTION!KEEP THIS EQUIPMENT AWAY FROM RAIN, MOISTURE AND LIQUIDS
CAUTION! TAKE CARE USING THIS EQUIPMENT!HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!
www.prolight.co.uk Slimline CW & WW COB Series User Manual 3
Product overview & technical specifications
Housinga20WCOBLED,theSlimlineseriesgivessmooth,evenlightacrossthewide60°beamangle.Suppliedwitharemovable25°beamreductionlensthefixtureoffersgreaterversatilityenablingrentalcompaniestostockoneproductwithtwobeamangleoptions.Theseunitshaverugged,allmetalhousing,sideentryXLRandpowerconnectionsandmeasureonly128mmindepthforeasytransportationandinstallation.Theycanbeoperatedinsoundactive,stand-alone,master/slaveorDMXmodes.
CWversion WWversion
•1x20Wcoolwhite(6500K)orwarmwhite(3200K)COBLED
•Interchangeablebeamangle:25°or60°(fieldangle:80°)
•3000Hzrefreshrate
•DMXchannels:1or2selectable
•Staticcolour,colourchange,colourfade,autorun,soundactiveandmaster/slavemodes
•0-100%dimmingwithvariablestrobe
•Bracketallowsformultipleriggingorfloorstandingapplications
•Recessedrearcontrolpanelandrubberfeetallowthepaneltositflatonthefloorforuplighting
•4pushbuttonmenuwithLEDdisplay
•3-pinXLRin/outsockets
•IECPowerin/outsockets
•SideentryXLRandpowerconnections
•Convectioncooled
•OptionalIRremote(LEDJ90E)
Slimline CW & WW COB Series
Specifications
Powerconsumption 30W
Powersupply 100~240V,50/60Hz
Dimensions 210x128x220mm
Weight 1.8kg
Ordercode LEDJ61-1CW20Blackhousing
Ordercode LEDJ61A-1CW20Whitehousing
Ordercode LEDJ62-1WW20Blackhousing
Ordercode LEDJ62A-1WW20Whitehousing
0m 1m 2m 3m 4m 5m
60°25°
25° - Lux60° - Lux
5850694
1831182
86085
49350
39034
25° - Lux60° - Lux
4900624
1357151
65073
37647
24735
0m 1m 2m 3m 4m 5m
60°25°
210mm 128mm
220mm
White housing
www.prolight.co.uk Slimline CW & WW COB Series User Manual 4
Technical specifications
01-Bracket
02-Brackettighteningknobs
03-Earthpoint
04-LEDdisplay
05-Functionbuttons
06-DMXinputsocket
07-DMXoutputsocket
08-IECpowerinsocket
09-IECpoweroutsocket
10-Fuse1A250V
SLIMLINE 1WW20
POWER IN
www.prolight.co.uk
MODE ENTER UP DOWN
POWER OUT DMX OUT DMX IN
0810 0903 07 06
SLIMLINE 1CW20
POWER IN
www.prolight.co.uk
MODE ENTER UP DOWN
POWER OUT DMX OUT DMX IN
02
04
05
01
PUSH
CWrearpanel
WWrearpanel
Inthebox:1 x fixture, 1 x 25° lens, 1 x power cable & 1 x user manual
www.prolight.co.uk Slimline CW & WW COB Series User Manual 5
Operating instructions
DMX channel mode:
OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestflexibilitywhenitcomestocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitofthefixtureandeachfixtureindependently.
ToaccesstheDMXchannelmode,pressthe“MODE”buttonontherearoftheunittoshowA001ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthedesiredDMXaddress.Nowpressthe“ENTER”buttontochooseoneofthe1or2DMXchannelmodesusethe“UP”and“DOWN”buttons,andpressthe“ENTER”buttontoconfirmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.
Dimming mode:
Toaccessthedimmingmode,pressthe“MODE”buttonontherearoftheunittoshowC000ontheLCDdisplay.Thenpressthe“MODE”tosetthedesiredbrightness.Nowpress“ENTER”untilthedisplayshowsF--OontheLEDdisplayandusethe“UP”and“DOWN”buttonstosetthestrobespeed.
Value: 0 - 9 (0 = Off, 9 = Fast)
Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.
Master/slave mode:
Tosetthemasterunit,pressthe“MODE”buttonontherearofthemasterunitthenselectyourdesiredprogram(soundactive,auto,staticcolour,colourmixoroneofthebuilt-inprograms).Tosettheotherunitsinslavemode,pressthe“MODE”buttonontherearoftheunittoshowSLAUontheLEDdisplayandpressthe“ENTER”buttontoconfirmthesetting.Theunitwillnowruninsequencewiththemasterunit.
Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.
PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.
Sound active mode:
Toaccessthesoundactivemode,pressthe“MODE”buttonontherearoftheunittoshowSU00ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthesoundsensitivitylevelfromSU.00~SU.99andpressthe“ENTER”buttontoconfirmthesetting.
Value: 00 - 99 (00 = low, 99 = high)
Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.
Channel Value Function
1 0-255 0-100%dimming
1 channel mode:
Channel Value Function
1 0-255 0-100%masterdimmer
2 0 Nofunction
1-255 Variablestrobe(slow-fast)
2 channel mode:
www.prolight.co.uk Slimline CW & WW COB Series User Manual 6
Operating instructions
Optional IR remote functions:
Button functions:
DMX address examples:
TosettheDMXaddress;
•Pressthe“S”button,theLEDilluminateinfull,youcannowstarttosettheDMXaddress•Selecttherequired3digitDMXaddress(eg001or136or275)theunitwillthenflashtoconfirmtheaddresshasbeenset
•Nowpressthe“DMXMODE”buttontosavethenewaddressintothememory
Important notes:
•SettheDMXaddressoneachfixturebeforepluggingintotheDMXcontroller
•TheIRremoteiscannotbeusedwhenthefixture(s)arebeingcontrolledbyaDMXcontroller
•Themaximumtransmitterdistanceis10m-PleasemakesurethatyouhavetheIRremoteaimeddirectlyatthefrontpanelofeachfixturetobeprogrammed
• Ifyoudonotpressthe“DMXMODE”buttonafteryouhavechangedtheDMXaddress,whenyoupowerdownthefixtureitwilllosetheaddressyouhaveset
01-Blackout
02-TosetthebrightnessoftheLEDeitherselect20%,50%or100%oralternativelyyoucanusethe‘+’and‘-’buttons
03-Flashoff
04-TosettheflashspeedoftheLEDeitherselect20%,50%or100%oralternativelyyoucanusethe‘+’and‘-’buttons
05-SettheLEDintoDMXmode
06-SettheLEDintosoundactivemode
07-SettheLEDintoslavemode
08-SettheDMXaddressfortheLED1 2 34 5 6 0
+
_7 8 9
D SL S
OFF 20% 50% 100%
SA
STROBE
OFF 20% 50% 100%
DIMMING
SLAVE SET ADDRSOUND ACTIVEDMX MODE
01
04
02
07
06
05 08
Optional IR remote Order code: LEDJ90E
03
www.prolight.co.uk Slimline CW & WW COB Series User Manual 7
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachfixturerequiresa“startaddress”from1-511.Afixturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannelindicatedbythestartaddress.Forexample,afixturethatoccupiesoruses7channelsofDMXandwasaddressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthechainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligentfixturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothefixture.DMXdataissentasserialdatathattravelsfromfixturetofixtureviatheDATA“IN”andDATA“OUT”XLRterminalslocatedonallDMXfixtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogetherandoperatefromasinglecontroller,aslongasallfixturesandthecontrollerareDMXcompliant.ToensureproperDMXdatatransmission,whenusingseveralDMXfixturestrytousetheshortestcablepathpossible.TheorderinwhichfixturesareconnectedinaDMXlinedoesnotinfluencetheDMXaddressing.Forexample;afixtureassignedtoaDMXaddressof1maybeplacedanywhereinaDMXline,atthebeginning,attheend,oranywhereinthemiddle.WhenafixtureisassignedaDMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisfixturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,seeimagebelow.
Also remember that DMX cable must be daisy chained and cannot be split.
DMX setup
FurtherDMXcablescanbepurchasedfromallgoodsoundandlightingsuppliersorProLightConceptsdealers.Pleasequote:
CABL10 – 2mCABL11 – 5mCABL12 – 10m
www.prolight.co.uk Slimline CW & WW COB Series User Manual 8
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.DonotconnectthecablesshieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRsoutercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,youmayneedtouseaterminatoronthelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease the possibilities of erratic behaviour. (3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRfixturesmaybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmissionproblemsandinterferance.itisalwaysadvisabletoconnectaDMXterminal,(resistance120Ohm1/4W)betweenpin2(DMX-)andpin3(DMX+)ofthelastfixture.
5-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C
3-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)
3-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)
5-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C
DMX setup
www.prolight.co.uk Slimline CW & WW COB Series User Manual 9
WEEE notice
Correct Disposal of this Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedwithotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtotheenvironmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromothertypesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheirlocalgovernmentoffice,fordetailsofwhereandhowtheycantakethisitemforenvironmentallysaferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthepurchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
www.prolight.co.uk Slimline CW & WW COB Series User Manual 10
Optional accessories
Pleasecontactyourlocalretailertopurchasetheseaccessories.
Tokeepup-to-dateonthelatestaccessoriesandproductrangeadditionspleasevisitwww.prolight.co.uk
Optional Quad Case (Holds 4 x fixtures)Order code: CASE95
Optional IR remoteOrder code: LEDJ90E
1 2 34 5 6 0
+
_7 8 9
D SL S
OFF 20% 50% 100%
SA
STROBE
OFF 20% 50% 100%
DIMMING
SLAVE SET ADDRSOUND ACTIVEDMX MODE
www.prolight.co.uk Slimline CW & WW COB Series User Manual 11
www.prolight.co.uk Slimline CW & WW COB Series User Manual 12