Sliding panels - Scotstream › ... › 2017 › 11 › Sliding-Panel-Brise-Soleil… · Over the...

Sliding panelsStructural aluminium sun protection

Loggia® | Patio®

Contents < Introduction

Cover: Loggialu®, Maasvallei, Gulpen (NL)

Contents

Introduction 2

Sliding panels 4

Loggialu® Paro 6

Loggialu® Paro Privacy 8

Loggialu® Plano 10

Loggiawood® Paro 12

Loggiawood® Paro Privacy 14

Loggiascreen® Canvas 16

Loggiascreen® 4fix 17

Loggialu® LG.040 + LG.065 18

Loggialu® LG.130 20

Moveables louvres 22

References 23

Patio® sliding panels 24

Flexguide® 26

Sliding systems 28

Control 29

Other applications 29

References 30

Over the past decade, healthy and ecological construction methods have become increasingly important. Particular attention should be paid to avoid overheating in summer and to assure a good air quality. Nevertheless, it has become obvious that the right solution is more complex than simply installing an air conditioning system. Various studies have proven that health problems arise more frequently in air conditioned buildings than in natural ventilated buildings. According to these studies, 90% of the interviewees prefer natural ventilation to an air conditioning system.

Healthy Building Concept

The Healthy Building Concept (HBC) offers an alternative by providing a healthy, comfortable and energy-efficient indoor climate (in accordance with the requirements of the Kyoto protocol). HBC guarantees a good indoor air quality through natural ventilation, as well as comfortable temperatures in summer using external sun protection and intensive night ventilation. In companies, this boosts the employees’ productivity and increases output. As a result, buildings constructed matching the Healthy Building Concept offer benefits to their owners, occupants and the environment.

The need for sun protection

Sun-oriented buildings or homes, with large glass surfaces facing south, offer many advantages. Many people feel that the visual contact with the exterior and the natural light entering the building is very important. However, in summer, this may create less comfortable side-effects, such as overheating or annoying glare.

The efficiency of a sun protection system strongly depends on its position. An exterior sun protection system blocks sunrays before reaching the glass. Therefore it eliminates the greenhouse effect, strongly reduces undesirable heating of the building and prevents the need to cool down the living space.

4

Sliding panels

IntroductionIn reply to the growing demand for aesthetic, multi-functional façade elements, RENSON® has expanded its range of sliding panels even further. The Loggia panels consist of frames, fitted with aluminium blades, wooden blades or screen fabrics.The Sunclips and Icarus Patio panels are sliding cassettes, in which the blades have been screwed between vertical frames. The Loggia panels consist of frames fitted with aluminium or wooden blades or screen fabrics. Different types of blades can be used with both systems. Depending on the desired enclosure and the required see-through visibility, the blades can be positioned in different angles and with different blade pitches.In addition to this wide range of sliding panels with fixed, aluminium or wooden sun protection blades, there are also panels with screens or with moveable blades.

ApplicationsMulti-functional façade elements• Sun protection• Intensive ventilation• Visual screen• Fence• Daylight control• Partial shading

Patio®, Colombe Parc Offices, Toulouse-Colomiers (FR)

Loggiawood®, Site Alsberghe Gent (BE)

Loggia®, Callens & EMK, Waregem (BE)

Loggia® panels Patio® panels

5

P

OAS

Sliding panels

Technical features• Extruded aluminium profiles• Aesthetic quality finish• Pre-assembled (custom manufacturing)or for self- assembly as a modu-

lar design (stock lengths, accessories and parts) (*) • Easy to operate• High-quality accessories• Rigid and stable• Can be equipped with the Flexguide. This flexible lower guiding sys-

tem is used for sloping or irregular surfaces (*)

• CE markings approved (*)

(*) See panel type description

Flexguide®Patented, flexible lower guiding system for sliding panels.The unique solution for sloping or irregular surfaces - see page 26 - 27.

ParametersEach type of panel is characterized by its properties in terms of visual transparency and sun protection. Visual transparency is represented by the parameter OV (= O/P), the perpendicular visual opening; the larger OV, the more visibility through the panels. The level of sun protection is represented by AS: the limitation angle of sunray incidence; the smaller AS, the more efficient the sun protection.

Loggiawood®, Sous Chavort, Apartments, Montmélian (FR)

Flexguide®

6

Loggialu® Paro

DescriptionLoggialu Paro combines the functionality of an efficient sun protection panel with the elegant appearance and aesthetic design of a high-quality modern concept. The frame ensures its stability, whilst the aluminium blades are incorporated into the side channels discreet and without visible fixing.

Product• Efficient sun protection with maximum light and comfortable viewing• Similar view of the element from inside and outside• Finished panels without visible fixing elements• Panel in extruded aluminium with anodised or powder coated finish• Low maintenance:

- High quality and maintenance-free slide fittings- Powder-coated or anodised aluminium finish, easy to clean

• Suitable as sliding or fixed panel• Sliding systems:

- Easy sliding- Symmetrical sliding- Telescopic sliding (Loggialu Paro 0140)- Manual or motorised

• Sizes are depending on the local wind load and regional legislation• Loggialu Paro is available pre-assembled (custom manufacturing) or

for self-assembly as a modular design (stock lengths, accessories and parts)

7

Loggialu® Paro

Loggialu® Paro 0140

Wind load qb in Pa

Typical panel widths “W” in mm

800 1200 1500

600 3000 H 2730 H 2580 H

800 2800 H 2540 H 2400 H

1200 2540 H 2300 H 2170 H (*)

Loggialu® Paro 0160

Wind load qb in Pa


800 1200 1500

600 3500 H 3500 H 3500 H

800 3500 H 3450 H 3270 H

1200 3450 H 3120 H 2950 H (*)

(*) = with spacer:In consultation with our project team for detailed or larger panel dimensions.Basic wind load qb in accordance with norm ENV 1991-2-4(1995).

Overview of possible panel heights “H” based on Wind load qb and panel width “W”:

Technical specifications• Aluminium components

- Aluminium extrusion, alloy EN AW-6063 T66- Anodised (20 micron) F1- Polyester powder coating RAL or Syntha Pulvin® colours (60-80 µ /

40 µ (UK)• Blades

- Blade pitch : 90 mm- Depth : 30 mm- Inclination : 33°- Extreme angle of sunlight AS: 46°- Perpendicular visual opening OV: 31% - Maximum free span of the blade: 1500 mm Larger panel widths (> 1500 mm) are possible with spacers.

• CE markings approved

• Frames - Loggialu Paro 0140:

Frame with a depth of 40 mm, suitable for normal panel dimensions (maximum panel height 3000 mm) and wind loads.

- Loggialu Paro 0160: Frame with a depth of 60 mm, suitable for normal panel dimensions (maximum panel height 3500 mm) and wind loads.

• Depending on the height of the sliding panel, the horizontal frame profile (above and/or below) can be 70 mm high instead of 40 mm

Options• Flexible lower guiding system: Flexguide

8

Loggialu® Paro Privacy

DescriptionLoggialu Paro Privacy combines the functionality of an efficient sun protection panel with the elegant appearance and aesthetic design of a high-quality modern concept.The blades are moveable with the “Privacy” concept, so they can be manually tilted from a closed to a completely open position or vice versa. The secure surrounding frame of extruded aluminium ensures good shape retention of the whole without visible fixations in the corners.

Product• Blades suitable for manual tilting from closed to open position or vice

versa and divided into two operating areas, which allows, for example, the blades to be in an open position above and closed below

• Aesthetically finished panels without visible fixing elements• Frame and blades in extruded aluminium with anodised or powder

coated finish• Pre-assembled and ready to install, custom manufacture• Low maintenance:



- Easy sliding- Symmetrical sliding- Telescopic sliding (Loggialu Paro 0140 Privacy)

• Sliding panel manually operated or motorised• Sizes are depending on the local wind load and regional legislation


- Aluminium extrusion, alloy EN AW-6063 T66- Anodised (20 micron) F1- Polyester powder coating RAL or Syntha Pulvin colours (60-80 µ /

40 µ (UK))• Blades:

- Blade pitch : 57 mm- Blade inclination: 147°- Size of the blade: 65 x 16 mm- Maximum free span of the blade: 1.500mm


• Frames - Loggialu Paro 0140 Privacy:


- Loggialu Paro 0160 Privacy: Frame with a depth of 60 mm, suitable for normal panel dimensions (maximum panel height 3500 mm) and wind loads.

• Depending on the height of the sliding panel, the horizontal frame profile on top can be 55 mm instead of 40 mm and 55 or 70 mm below instead of 40 mm high.

Options• Flexible lower guiding system Flexguide

Blades can be manually tilted from the closed to completely open position

Loggialu® Paro Privacy

Loggialu® Paro 0140 Privacy

Loggialu® Paro 0160 Privacy

10

Loggialu® Plano

DescriptionLoggialu Plano combines the functionality of an efficient sunshade with the elegant appearance and aesthetic design of a high-value contemporary concept. The firmly encircling framework guarantees good retention of shape for the entire unit, while the fine, perpendicular aluminium louvres are incorporated discreetly and without visible attachment into the vertical side profiles of the framework.

Product• Efficient sun protection during maximum light entry and a

comfortable view• Identical appearance of the element both inside and outside• Finished panels without visible connecting elements• Panel in extruded aluminium with anodised or powder-coated finish• Low maintenance:

- High-value and low maintenance sliding hardware- Powder-coated or anodised aluminium, easy to clean

• Suitable as sliding panel or fixed panel• Sliding systems:

- Simple, symmetrical, telescopically sliding (Loggialu Plano 0140), manual or motor-driven

• Possible dimensions depend on the local wind force and regional regulations(*)

• Loggialu Plano is delivered ready for installation (custom production).

(*) In consultation with our project team

11

Loggialu® Plano

Technical characteristics• Aluminium components:

- Aluminium extrusion, EN AW-6063 T66 alloy- Anodised (20 micron) F1- Polyester powder-coat paint (60-80 micron) in RAL colours

• Louvres- Step: 50 mm- Depth: 33 mm- Height: 16 mm- Outermost angle of direct sun entry AS: 46°- Perpendicular visual opening OV: 32 % - Maximum possible unsupported span for the louvre: 1,200 mm

• CE certified sliding panels• Frames

- Loggialu Paro 0140: Frame with a depth of 40 mm. Suitable for normal dimensions (maximum panel height 3000 mm) and wind forces.

- Loggialu Paro 0160: Frame with a depth of 60 mm. Suitable for larger dimensions (maximum panel height 3500 mm) and higher wind forces.

• Depending on the height of the sliding panel, the horizontal framework profile (upper and/or lower) is 70 mm high instead of 40 mm.

Options• Flexguide flexible lower guide

Loggialu® Plano 0140 Loggialu® Plano 0160

40

33

16

50

46°

60

33

16

50

6040

46°

33

16

50

46°

40

40

33

16

50

46°

60

33

16

50

6040

46°

33

16

50

60

46°

12

Loggiawood® Paro

DescriptionLoggiawood Paro combines the quality of aluminium and the naturalness of wood in an efficient, aesthetic contemporary system.The solid extruded aluminium frame ensures the panel retains its shape, with the wooden blades providing a very natural and elegant look.

Product• Efficient sun protection with maximum light and comfortable viewing• Similar view of the element from inside and outside• Finished panels without visible fixing elements• Panel in extruded aluminium with anodised or powder coated finish• Low maintenance:



- Easy sliding- Symmetrical sliding- Telescopic sliding (Loggialu Paro 0140)- Manual or motorised

• Sizes depending on the local wind load and regional legislation• Loggialu Paro is available pre-assembled (custom manufacturing) or

for self-assembly as a modular design (stock lengths, accessories and parts)

13

Loggiawood® Paro

40

16

90

40

33°

66

30

47°


Wind load qb in Pa


800 1200 1500

600 3000 H 2740 H 2590 H (*)

800 2820 H 2550 H 2410 H (*)

1200 2550 H 2300 H 2180 H (*)


Wind load qb in Pa


800 1200 1500

600 3500 H 3500 H 3500 H (*)

800 3500 H 3460 H 3280 H (*)

1200 3460 H 3130 H 2960 H (*)

(*) = with spacer:In consultation with our project team for detailed or larger panel dimensions.Basic wind load qb in accordance with norm ENV 1991-2-4(1995).

Overview of possible panel heights “H” based on Wind load qb and panel width “W”:



40 µ (UK))• Wooden blades

- WR Cedar Clear n 2- Untreated, for natural aging- Blade pitch: 90 mm- Depth: 30 mm- Inclination: 33°- Extreme angle of sunlight AS: 46°- Perpendicular visual opening OV: 31% - Maximum possible free span of the blade: 1.200 mm

Larger panel widths (> 1.200 mm) are possible using spacers. • CE markings approved

• Frames - Loggiawood Paro 0140:


- Loggiawood Paro 0160: Frame with a depth of 60 mm, suitable for normal panel dimensions (maximum panel height 3500 mm) and wind loads.

• Depending on the height of the sliding panel, the horizontal frame profile (above and/or below) can be 70 mm high instead of 40 mm


14

Loggiawood® Paro Privacy

DescriptionLoggiawood Paro Privacy combines the quality of aluminium and the nat-ural aspect of wood in an aesthetic and efficient modern concept. The blades are moveable with the “Privacy” concept, so they can be manually tilted from a closed to a completely open position or vice versa. The frame of extruded aluminium ensures its stability, whilst the wooden blades on the panel provide a very natural and elegant appearance.

Product• Blades suitable for manual tilting from closed to open position or vice

versa and divided into two operating areas, which allows, for example, the blades to be in an open position above and closed below

• Aesthetically finished panels without visible fixing elements• Frame in extruded aluminium with anodised or powder coated finish• Pre-assembled and ready to install, custom manufacture• Low maintenance:

- High-quality wood, suitable for natural aging- High-quality and maintenance-free slide fittings- Powder-coated or anodised aluminium finish, easy to clean


- Easy sliding- Symmetrical sliding- Telescopic sliding (Loggiawood Paro 0140 Privacy)

• Sliding panel can be manually operated or motorised• Sizes are depending on the local wind load and regional legislation

Technical specifications • Aluminium components


40 µ (UK))• Wooden blades

- WR Cedar Clear n 2- Untreated, for natural aging- Blade pitch : 57 mm- Blade inclination: 147°- Size of the blade: 65 x 16 mm- Maximum free span of the blade: 1.200 mm


• Frames - Loggiawood Paro 0140 Privacy:


- Loggiawood Paro 0160 Privacy: Frame with a depth of 60 mm, suitable for normal panel dimensions (maximum panel height 3500 mm) and wind loads.

• Depending on the height of the sliding panel, the horizontal frame profile above can be 55 mm instead of 40 mm and 55 or 70 mm be-low instead of 40 mm high.


Blades can be manually tilted from a closed to a completely open position

Loggiawood® Paro Privacy

Loggiawood® Paro 0140 Privacy

Loggiawood® Paro 0160 Privacy

16

A-A ( 1 : 10 )

B ( 1 : 2 )

A

A

B

r0039223

1100

30

30

42

42

Loggiascreen® Canvas

DescriptionLoggiascreen Canvas is a sliding panel with a contemporary design, which combines the characteristics of different materials. For efficient management of light and heat penetration, a high perfor-mant sun protection screen is clamped around a firm aluminum frame. A minimalistic look is obtained thanks to the invisible frame.

Technical features• Efficient sun protection • Finished panels without visible connecting elements• Panel in extruded aluminium with anodised or powder-coated finish• Screen made of prestressed coated polyester fabric (Soltis) or glass

fibre (Sergé)• Low maintenance:

- High-value and low maintenance sliding hardware- Powder-coated or anodised aluminium, easy to clean

• Suitable as sliding panel or fixed panel• Sliding systems:

- Simple, symmetrical, telescopically sliding (Loggialu Plano 0140), manual or motor-driven

• Possible dimensions depend on the local wind force and regional regulations (*). Maximum panel height 3000 mm

• Loggiascreen Canvas is delivered ready for installation (custom pro-duction).

• CE certified sliding panels• Frame 40 x 55 mm(*) In consultation with our project team.

Material• Aluminium extrusion, EN AW-6063 T66 alloy• Screen fabric based on prestressed coated polyester fabric (Soltis 86)

or glass fibre (Sergé), available in a wide range of colours

FinishAluminium components:• Anodised (20 micron) F1• Polyester powder-coat paint (60-80 micron) in RAL colours

Options• Flexguide flexbile lower guide• Aluminium handle

17

Loggiascreen® 4fix

Loggiascreen® 4fix LG.040

Loggiascreen® 4fix LG.067

40

40

40

40

35

67

35

67

LG.067.01

SCREEN

HENDEL

REMSYSTEEMBrakes

Lever

Screen

LG.040.06 / LG.067.01

DescriptionLoggiascreen 4fix combines the characteristics of different materials and systems in a solution distinguished by its elegance, flexibility and efficiency. Double the attraction – the fabric is attached on all four sides and is held under permanent tension by an integrated system into the top and bottom frames. Loggiascreen 4fix is a system of panels (sliding or fixed) containing a taught fabric, which allows you to control light and heat penetration by changing the position of the panels to suit your needs. Loggiascreen 4fix can also be used to provide privacy and protection from the wind.

Technical features• Extruded aluminium frame, anodised or powder-coated• Solid structure for high wind resistance• Integrated system for attaching the fabric on all sides• Permanent fabric tension• Factory-assembled and delivered ready-to-fit, made to measure• High-quality, maintenance-free sliding fittings• Screen made of prestressed coated polyester fabric (Soltis) or glass

fibre• Motorised or manual sliding panels• Dimensions depending on the local and regional legislation and the

wind load (*). Maximum panel height: 3000 mm.(*) To be determined per project in conjunction with our project team

Material• Aluminium extrusion, EN AW-6063 T66 alloy• Screen fabric based on prestressed coated polyester fabric (Soltis 86) -

available in a wide range of colours. Other types of fabric available on request.

FinishAluminium parts:• Anodised (20 microns)• Polyester powder-coated RAL or Syntha Pulvin colours

(60 - 80 µ / 40 µ (UK))

Frames• Loggiascreen 4fix LG.040

Frame having a depth of 40mm, suitable for normal panel dimensions and wind loads.

• Loggiascreen 4fix LG.067 Frame having a depth of 67mm, suitable for

larger panel sizes and higher wind loads.

Loggialu® LG.040 + LG.065

Loggia® LG.065 with L.066.01, Keppekouter, Offices, Erembodegem (BE)

19

Loggialu® LG.040 + LG.065

DescriptionLoggialu LG.040 and LG.065 are systems with a slim frame that goes all the way around and serve to control the solar heat and natural daylight. The fittings for these sliding panels consist of fixed blades of extruded aluminium, clipped into the system using the appropriate blade holders.

Finish• Anodised (20 micron)• Polyester powder-coated RAL or Syntha Pulvin colours (60 - 80 µ /

40 µ (UK))

Loggia®, Nursing Home, residential, Luxembourg (LU)

57°

LG.040 + L.066.21Normal maximum dimensions:

Qb Typical dimension L x H (mm x mm)

650 Pa 1100 x 2500

800 Pa 900 x 2500

1250 Pa 800 x 2240

Perpendicular visual opening OV: 30,3 %Limited angle of sunray incidence AS: 33°Blade pitch: 66 mm

LG.065 + L.066.01Normal maximum dimensions:

Qb Typical dimension L x H (mm x mm)

650 Pa 1000 x 3220

800 Pa 1000 x 3010

1250 Pa 800 x 2790

Perpendicular visual opening OV: 42 %Limited angle of sunray incidence AS: 45°Blade pitch: 132 mm

Loggialu® LG.130

Loggia® 130 with Icarus® 125, TMWV Offices, Asse (BE)

21

Loggialu® LG.130

DescriptionLoggia LG.130 frames are extra rigid, designed to meet the require-ments for sun protection panels up to 6,000 mm in height. The local wind pressure bearing on the system and the type of blade to be fitted are always taken into account. LG.130 type frames can be fitted with different types of blades: ICA.125, ICA.150, ICP.150 and SE.130. The blades can be positioned at different inclinations and at different inter-vals. The following table suggests twenty different possibilities. Other configurations are possible on request.

Finish• Anodised (20 microns)• Polyester powder-coated RAL or Syntha Pulvin colours

(60 - 80 µ / 40 µ (UK))

Loggia® 130 with Icarus® 125, TMWV Offices, Asse (BE)

Y-94

125

IC.125.01 100

45°

100

130 X-94

X

Y

Y-94

59°

29°

69

130X-94

69

XY

IC.125.01

150

IC P.150

150

45°

15°

130

Y-94 Y

X

X-94

23

ICA.125 ICA.150

ICA.150

Blade type Angle (°) Blade pitch (mm) AS (°) OV (%)ICA.125 90 125 45 80,0

ICA.125 75 125 37 70,8

ICA.125 75 150 44 75,7

ICA.125 60 125 30 48,4

ICA.125 60 150 39 57,0

ICA.125 60 175 46 63,1

ICA.125 45 125 22 28,3

ICA.125 45 150 35 40,3

ICA.125 45 175 44 48,8

ICA.150 59 150 29 46,0

Blade type Angle (°) Blade pitch (mm) AS (°) OV (%)ICA.150 59 200 44 59,5

ICA.150 45 150 22 27,8

ICA.150 45 200 42 45,9

ICP.150 45 150 15 15,3

ICP.150 45 200 41 36,5

SE.130 60 130 30 46,8

SE.130 60 160 40 56,8

SE.130 45 130 22 27,5

SE.130 45 160 37 41,1

SE.130 45 190 47 50,4

AS: Limit angle of sunray incidence • OV: Perpendicular visual opening • Definitions: see page 5

EXAMPLES

22

To manage solar heat and natural daylight even more effectively, RENSON® has developed the Loggialu LG.130 with manually moving blades ICA.125. This system allows not only the panel to be put in the desired position, but the blades can also be rotated into their ideal position. The angle of the blades depends on the position of the sun or the desired sun shading.

Applications• Sun protection• Intensive ventilation• Visual screen• Control of daylight• Control of shading

Technical features• Aluminium extrusion, alloy EN AW-6063 T66• Anodised (20 micron) F1• Polyester powder-coated RAL or Syntha Pulvin colours (60-80 µ / 40 µ

(UK))• Made-to-mesure• Sliding panel operated manually or motorised• Manual tilting blades• Blades adjustable in 15° increments (7 positions)• Maximum dimensions to be checked on request

Materials• Aluminium extrusion, EN AW-6063 T66 alloy

FinishAluminium parts:• Anodised (20 microns)• Polyester powder-coated RAL or Syntha Pulvin colours

(60 - 80 µ / 40 µ (UK))

Moveable louvres

23

Fixscreen® 100 EVO - Loggia® LG.130 with Icarus® ICA.125, Private Residence, Breda (NL)

Loggia® LG.130 with ICA.125, Campus KaSo, School, Maaseik (BE)

Loggialu® Paro 0140, Brede School 't Duyfrak, Valkenburg (NL)

Sunclips® EVO SE.096 - Loggiawood® - Fixscreen® 100 EVO, Feys, Offices, Poperinge (BE)

References

Sunclips® SE.096.01 Patio - Louvre 432, Ter Dompel,Apartments, Waregem (BE)

Patio® sliding panels

25

DescriptionSunclips and Icarus Patio are sliding panels consisting of sun protection blades screwed between 2 flat vertical profiles. This assembly principle is the basis of this product’s great flexibility: different types of blades can be installed at different intervals or at different angles.Patio sliding panels are notable for the elegant design of the vertical profiles. The maximum panel dimensions depend on the selected profiles and the local wind pressure bearing on the system.

Finish• Anodised (20 microns)• Polyester powder-coated RAL or Syntha Pulvin colours

(60 - 80 µ / 40 µ (UK))

80

Y

X

45°

96

25.9

22°

90

Y

X

120 6

8

39°

30°

EVO.96 ICA.100

Y

X

100

37°

65.8

160

45°

70

Y

X

75 36.

5

38°

30°

EVO.130 ICP.060

Sunclips® Patio, Residences Bergschenhof, Bergschenhoek (NL)

Blade type Angle (°) Blade pitch (mm) AS (°) OV (%)EVO.96 45 96 22 27

EVO.96 45 115 35 39

EVO.96 45 135 45 48

EVO.130 45 130 22 28

EVO.130 45 160 36 41

EVO.130 45 190 47 50

ICA.100 0 100 45 77

ICA.100 0 120 50 81

ICA.100 15 100 37 70

ICA.100 15 120 44 75

ICA.100 30 100 30 48

ICA.100 30 120 39 57

ICA.100 30 140 46 63

ICA.100 45 120 22 28

ICA.100 45 120 35 40

ICA.100 45 140 44 49

ICA.125 0 125 45 80

ICA.125 0 150 50 83

Blade type Angle (°) Blade pitch (mm) AS (°) OV (%)ICA.125 15 125 37 71

ICA.125 15 150 44 76

ICA.125 30 125 30 48

ICA.125 30 150 39 57

ICA.125 30 175 46 63

ICA.125 45 125 22 24

ICA.125 45 150 35 40

ICA.125 45 175 45 49

ICP.060 0 60 40 83

ICP.060 0 75 47 87

ICP.060 15 60 32 58

ICP.060 15 75 42 67

ICP.060 30 60 25 36

ICP.060 30 75 38 49

ICP.060 30 90 48 57

ICP.060 45 60 17 18

ICP.060 45 75 36 34

ICP.060 45 90 48 45

AS: Limit angle of sunray incidence • OV: Perpendicular visual opening • Definitions: see page 5

Patio® sliding panels

26

Flexguide®

DescriptionFlexguide by RENSON® is a patented, flexible lower guiding system that can compensate for level differences of up to 50 mm. This flexible lower guiding system automatically adjusts itself in situations with drainage slopes or uneven surfaces due to construction faults or temporary loads due to the spring tension, so that it is not necessary to thicken or dou-ble up the lower guiding system profile.The lower guiding system is simply anchored to the surface, just as if it were a flat surface. The spring-loaded pin in the Flexguide continuously maintains contact with this lower guiding system, even on a sloping or irregular surface.

Uses • Sloping surfaces such as terrace coverings with drainage slope• Between 2 levels such as ceiling and floor with possible constructional

faults

FeaturesAesthetic• Flexguide is discreet and integrated into the sliding panels frame

profile without visible fixings.

Guarantees stability• Resistant to thermal expansion• Resistant to setting of building and building parts (permanent or

temporary)

Technical features• Flexguide has been made entirely from stainless steel material and

is maintenance free• The above-mentioned types of sliding panels with Flexguide meet all

CE requirements as stated in the declaration of performance DoP/RP/001 on the basis of harmonised technical specifications according to EN 13659:2004.

• During the development phase, Flexguide has undergone durability testing ensuring functionality and service life.

• Flexguide is also available as a separate component for Loggia building box system (modular system).

Use with sloping surface e.g.: terrace covering with drainage slope

Use between 2 levels e.g.: ceiling and floor with possible constructional defects

27

Flexguide®

0 - 50 mm

0 - 50 mm

26+5

0-10 10.5

3

37

12.5

3

Types of Flexguide® and uses:

1. Flexguide®-Plus- 37x12,5x3 mm- “T” under-base guiding profile with slight elevation of 12,5 mm

suitable for openings, e.g.: wheelchair users - Typical application: terrace covering

2. Flexguide®-Long- 25x25x4 mm- “L” under-base guiding profile with height of 25 mm- Typical application: suitable for high wind loads

28

Sliding systems

Depending on the situation and user preferences, different sliding systems can be selected:

• Individually slidingFor this application, the panels are controlled individually. Each panel can be placed in its desired position without affecting the other panels.

• Symmetrically slidingThis system consists of pairs of mutually interconnected panels. The panels are connected in order to move symmetrically in relation to one another.

• Telescopically slidingFor applications requiring wider window surfaces to be shaded in one go, telescopically connected panels are a suitable option. In this system, two or more panels are telescopically interconnected so that, if controlled, they telescopically slide out or behind one another. Each panel moves in a different rail and, in open position, they are neatly “parked” behind one another.

Rabobank Franeker (NL)

Apartments Faulenstrasse (DU)

2035120351

2035220353

2035220353

2035120351

20139 2014020246 2013920246

21431

20352

20352

2035120351

2035220353

2035220353

2035120351

20139 2014020246 2013920246

21431

20352

20352

2035120351

2035220353

2035220353

2035120351

20139 2014020246 2013920246

21431

20352

20352

Loggia® LG.065 with perforated plate, Private Residence, Apartments , Brussels (BE)

29

Control

All sliding systems can be operated manually or motorised.

• 230V motor is suitable for operating with a simple switch, remote control or by connecting it to a Building Management System (BMS).

MM

Other applications

The sun protection panels described above can also be applied in other ways than sliding panels, e.g. as fixed installations or as folding systems.

1. Fixed panels If the moving elements do not need to be flexible, the different types

of sun protection panels can also be applied as fixed sun- or wind screens.

2. Folding panels Available with LG.040 The folding system is only available in a manually controlled version.

Loggia® LG.040, Jardin des Sens, residential, Saint Martin d’Hères (FR)

Loggia® with perforated plates Customized solution, Private Residence, IJlst (NL)

30

Loggiawood® motorized - Customized solution, La Maison 14, Bioclimatic huis, Paris (BE)

Sliding & folding panels, Les Jardins de Baseille, Erpent (BE)

Loggia® LG.065 - Loggia® LG.066.01 motorized, Vocational school of Ventspils, school, Ventspils (LV)

References

31

Loggia® LG.065 - Loggia® LG.066.01, Multifunctional building, Offices & apartments, Tbilisi (GE)

Loggiawood®, De Heilige Familie, School, Schaarbeek (BE)

Loggiawood®, Stinzenhof, Senior Apartments, Twello (NL)

References

C r e a t i n g h e a l t h y s p a c e s

VENTILATION

SUNPROTECTION

OUTDOOR © L

20

0211

5

07/

16

Ex

po

rt-E

ng

els

Dealer

RENSON®: your partner in ventilation and sun protection

RENSON®, headquartered in Waregem (Belgium), is a trendsetter in Europe in natural ventilation and sun protection. • Creating healthy spaces

From 1909, we’ve been developing energy efficient solutions assuring a healthy and comfortable indoor climate. Our remarkable headquarters - built according to the ‘Healthy Building Concept’ – is a beautiful example portraying our

corporate mission. • No speed limit on innovation

A multidisciplinary team of more than 70 R&D employees continually optimize our products and develop new and innovative concepts.

• Strong in communication Contact with the customer is of the utmost importance. A group of 70 in-the-field employees worldwide and a powerful international distribution network are ready to advise you on site. EXIT 5 at Waregem gives you the possibility to experience our products on your own and provides necessary training for installers.

• A reliable partner in business We can guarantee our customers optimal quality and service thanks to our environmentally friendly and modern production sites (with automated powder coating line, anodisation line, plastic injection moulding and mold making shop) covering an area of 95.000 m².

RENSON® reserves the right to make technical changes to the products shown. The latest brochures may be downloaded from www.renson.eu

RENSON® Export Department • Tel. +32 (0)56 62 71 04 • [email protected]

RENSON® HeadquartersIZ 2 Vijverdam • Maalbeekstraat 6 • B-8790 Waregem • BelgiumTel. +32 (0)56 62 71 11 • Fax +32 (0)56 60 28 [email protected] • www.renson.eu

RENSON® Fabrications LTD Fairfax Units 1-5 • Bircholt Road • Parkwood Industrial Estate • Maidstone • Kent ME15 9SF Tel. 01622/754123 • Fax 01622/[email protected] • www.rensonuk.net

Sliding panels - Scotstream › ... › 2017 › 11 › Sliding-Panel-Brise-Soleil… · Over the...

Documents

Transcript of Sliding panels - Scotstream › ... › 2017 › 11 › Sliding-Panel-Brise-Soleil… · Over the...