1. Features and TypesSlide RailFeatures of the Slide RailOuter railInner rail Cage BallFig.1 Structure of Slide Rail Model FBLStructure and Features Slide Rail model FBL is a thin, compact, lightweight and ultra-low price slide unit for nite motion. It has two rows of balls placed between an inner rail (made of a steel sheet roll-formed with precision) and an outer rail. The balls are evenly spaced by a cage press-molded with precision, thus eliminating friction between balls and achieving a smooth slide mechanism. Since model FBL achieves smooth straight motion with easy installation, it can be used in a wide range of applications such as photocopiers, measuring instruments, telecommunication equipment, medical equipment, automatic vending machines and various types of of ce equipment. [Unit Type That Allows Easy Installation] Since the clearance and the motion of the slide unit are optimally adjusted, simply mounting the unit onto the base or the table using screws will achieve a slide mechanism with virtually no running noise. [Thin and Compact] Since the sectional shape is thin designed, this slide pack only requires a small side space for installation. In addition, a desired number of slide pack units can be installed in parallel according to the load conditions. [Maintenance-free Operation] Since the Slide Rail model FBL is treated with zinc plating, and models E and D are treated with white alumite treatment, they are highly corrosion resistant. In addition, the slide unit contains lithium soap-based grease, which is highly stable against oxidation.A13-2

2. Features and Types Types of the Slide RailTypes of the Slide Rail Types and Features [Single Slides for Light Load]Model FBL 27SSpeci cation TableA13-14The most compact slide rail from THK.Model FBL 27SModel FBL 27S-P14Speci cation TableA13-15An inner rail pulling type of model FBL 27S. Releasing the automatic free disconnection spring attached on the inner rail allows the slide rail to be pulled out. When stored, the spring is automatically released unidirectionally under a certain pressure.Slide RailModel FBL 27S-P14Model FBL 35SSpeci cation TableA13-16A single slide type of Slide Rail with the most fundamental shape.Model FBL 35SA13-3 3. Model FBL 35S-P13Speci cation TableA13-17An inner rail pulling type of model FBL 35S. Releasing the disconnection spring attached on the inner rail allows the slide rail to be pulled out. When folded, the locked state with the disconnect spring is manually released.Model FBL 35S-P13Model FBL 35S-P14Speci cation TableA13-18An inner rail pulling type of model FBL 35S. Releasing the automatic free disconnection spring attached on the inner rail allows the slide rail to be pulled out. When stored, the spring is automatically released unidirectionally under a certain pressure.Model FBL 35S-P14A13-4 4. Features and Types Types of the Slide RailModel FBL 35MSpeci cation TableA13-19An inner rail pulling type of model FBL 35S. It stops by frictional resistance when the slide rail is fully opened, and is pulled out when being pulled further with force. (brake-stop type)Model FBL 35MModel FBL 35JSpeci cation TableA13-20Based on model FBL 35M, this model has a lead ball that serves as a guide when the inner rail is inserted.Model FBL 35JSpeci cation TableA13-21A brake-stop type of model FBL 35M. It can be mounted on the bottom face of a moving object when used.Model FBL 35BA13-5Slide RailModel FBL 35B 5. [Single Slides for Medium Load]Model FBL 35TSpeci cation TableA13-22A single slide combining two units of model FBL 35S. When folded, the locked state with the disconnect spring is manually released.Model FBL 35T[Double Slides for Light Load]Model FBL 27DSpeci cation TableA13-23A double-slide type that combines two units of model FBL 27S back-to-back. It is widely used in various types of OA equipment.Model FBL 27DModel FBL 35ESpeci cation TableA13-24This is a 2-level slide-unit type suitable for restricted spaces, featuring a stroke length that can exceed the total rail length.Model FBL 35EModel FBL 35E-P14Speci cation TableA13-25A three-rail, double-slide type that allows a long stroke in a small space. Releasing the automatic free disconnection spring attached on the inner rail allows the inner rail to be pulled out. When closed, the locked state is automatically released under pressure in the closing direction.Model FBL 35E-P14A13-6 6. Features and Types Types of the Slide Rail[Double Slides for Medium Load]Model FBL 35G-P13Speci cation TableA13-26A double-slide type that combines two units of model FBL 35S front-to-front. Releasing the automatic free disconnection spring attached on the inner rail allows the inner rail to be pulled out. When folded, the locked state with the disconnect spring is manually released. It is also equipped with a pull-lock mechanism that functions when the slide rail is fully opened. Model FBL 35G-P13Model FBL 35G-P14 A double-slide type that combines two units of model FBL 35S front-to-front. Releasing the automatic free disconnection spring attached on the inner rail allows the inner rail to be pulled out. When folded, the lock state with the disconnect spring can automatically be released under a certain pressure in the folding direction. It is also equipped with a pull-lock mechanism that functions when the slide rail is fully opened.Model FBL 35DSpeci cation TableA13-27Model FBL 35G-P14Speci cation TableA13-28Slide RailA double-slide type that combines two units of model FBL 35S back-to-back. It is extensively used regardless of the industry.Model FBL 35DModel FBL 35WSpeci cation TableA13-29A double-slide type based on model FBL 35S that achieves a thickness of one single-slide unit.Model FBL 35WA13-7 7. Model FBL 51HSpeci cation TableA13-30A three-rail, double-slide type that allows a long stroke. With the smallest thickness, this model can be used in a space-saving location even under a large load.Model FBL 51HModel FBL 51H-P13Speci cation TableA13-31A three-rail, double-slide type that allows a long stroke. With the smallest thickness, this model can be used in a space-saving location even under a large load. Releasing the automatic free disconnection spring attached on the inner rail allows the inner rail to be pulled out. When folded, the locked state with the disconnect spring is manually released. It is also equipped with a lock mechanism that functions when the slide rail is fully opened. Model FBL 51H-P13Model FBL 51H-P14Speci cation TableA13-32A three-rail, double-slide type that allows a long stroke. With the smallest thickness, this model can be used in a space-saving location even under a large load. Releasing the automatic free disconnection spring attached on the inner rail allows the inner rail to be pulled out. When closed, the locked state is automatically released under pressure in the closing direction.Model FBL 51H-P14A13-8 8. Features and Types Types of the Slide Rail[Double Slides for Heavy Load]Model FBL 35KSpeci cation TableA13-33A double-slide type combining 4 units of model FBL 35S. It achieves the largest permissible load among all types and is optimal for opening/ closing heavy objects.Model FBL 35KModel FBL 56HSpeci cation TableA13-34A double-slide type with the largest permissible load among the three rails. It is used extensively in various types of OA furniture.Model FBL 56HModel FBL 56H-P13Speci cation TableA13-35Slide RailA double-slide type with the largest permissible load among the three rails. Releasing the automatic free disconnection spring attached on the inner rail allows the inner rail to be pulled out. When folded, the locked state with the disconnect spring is manually released. It is also equipped with a lock mechanism that functions when the slide rail is fully opened. Model FBL 56H-P13Model FBL 56H-P14Speci cation TableA13-36A double-slide type with the largest permissible load among the three rails. Releasing the automatic free disconnection spring attached on the inner rail allows the inner rail to be pulled out. When closed, the locked state is automatically released under pressure in the closing direction.Model FBL 56H-P14A13-9 9. [Linear Type Slides]Light Load Type Model FBL 35FSpeci cation TableA13-37Using a ange type that can easily be mounted, this slide-type model is capable of performing straight, nite motion.Light Load Type Model FBL 35FMedium Load Type Model FBL 56FSpeci cation TableA13-38Using a ange type that can easily be mounted, this slide-type model is capable of performing straight, nite motion. It is optimal for locations under a large working load.Medium Load Type Model FBL 56FHeavy Load Type Model FBL 48DRSpeci cation TableA13-39A heavy-load, low-friction slide rail developed for sliding heavy doors.Heavy Load Type Model FBL 48DR[Wheel-type Linear Slide]Model E36RSSpeci cation TableA13-40A linear slide that combines a lightweight outer rail made of precision-extruded aluminum alloy with a highly wear-resistant resin bearing. Since no grease adheres to the rail surface, it can be used for a drawer without soiling the stored articles. Model E36RSA13-10 10. Features and Types Types of the Slide Rail[Aluminum Alloy Slide Rail]Light Load Type Model E15Speci cation TableA13-41The lightest and most compact single slide in the aluminum alloy series. It is especially suitable for locations with magnetism, locations requiring antirust measures and locations where much importance is given to appearance.Light Load Type Model E15Light Load Type Model E20Speci cation TableA13-42A single-slide with the most fundamental shape in the aluminum alloy series. It is especially suitable for locations with magnetism, locations requiring antirust measures and locations where much importance is given to appearance.Light Load Type Model D20Speci cation TableA13-43The lightest and most compact double slides in the aluminum alloy series. It is especially suitable for locations with magnetism, locations requiring antirust measures and locations where much importance is given to appearance.Light Load Type Model D20A13-11Slide RailLight Load Type Model E20 11. Classi cation Table for Slide RailsSlide Rail Single SlideDouble SlideFor Light Load Model FBL27SModel FBL35BFor Light Load Model FBL27DModel FBL27S-P14Model FBL35E35.3272748.5Model FBL35E-P1433 19.1 9.5Model FBL35J Model FBL35S13Model D20 (Made of Aluminum) 2035.3Model FBL35S-P13 Model FBL35S-P149.5 16Model E15For Heavy Load9.55Model FBL35MModel E20Model FBL56H 561535.3(Made of Aluminum)Model FBL56H-P13(Made of Aluminum)Model FBL56H-P14 2035.316Model FBL35K9.571.48For Medium Load71.4Model FBL35T12.7A13-1223.9 12. Features and Types Classi cation Table for Slide RailsLinear Type Slide For Medium Load Model FBL51HModel FBL35G-P14Model FBL51H-P1335.3Model FBL51H-P14Model FBL35F35.3Model FBL35G-P13For Light Load11.151.519.1Model FBL35D12.7Model FBL56F5681.335.3Model FBL35WFor Medium Load19.114For Heavy Load48Model FBL48DR14.6Wheel Type36Model E36RS (Aluminum Outer Rail)12A13-13Slide Rail12.7 13. Model FBL 27S Stroke length S3Rail length L0.8 200.5B 0.3 A0.32- 4.5 (both ends)1000.3 200.3Access hole200.3 1000.3 C0.34.26 Access hole2- 4.5 (both ends)4.2 6D 0.3 E0.3 Rail length (L-3) 0.8200.59.50.5 Outer rail270.5Inner rail 1.61.6Retainer Cross section Unit: mmRail length L ( 0.8)Stroke S ( 3)ABCDE200135140.0160.0140.0160.0Mounting hole dimensionsMounting holePermissible load N/pair Inner rail Outer rail 55260Mass kg/pair 0.32250185190.0210.0150.0190.0210.0652400.40300222240.0260.0190.0240.0260.0652400.48350260290.0310.0225.0290.0310.0652300.56400297340.0360.0265.0340.0360.0652100.64450334390.0410.0300.0390.0410.0652000.72500371440.0460.0337.0440.0460.0651800.80Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL27S +300L Model numberA13-14Overall rail length (mm)To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 14. Model FBL 27S-P14Stroke length S3Rail length L 0.8 E0.3200.5D0.3 2- 4.5 (both ends)1000.3 200.3Lead stick4.264.262- 4.5 (both ends)Automatic free disconnection spring200.3 A 0.3Rubber cushionB0.3 C0.3200.59.50.5 Outer railRail length (L-3) 0.8270.5Inner rail 1.61.6Retainer Cross sectionRail length L ( 0.8)Stroke S ( 3)ABCDE20011665.0170.0140.0160.0452600.32250152100.0210.0190.0210.0452400.40300202100.0260.0240.0260.0452400.48350251100.0310.0290.0310.0452300.56400297100.0360.0340.0360.0452100.64450332100.0390.0410.0390.0410.0552100.72500371100.0440.0460.0440.0460.0552000.80550407100.0490.0510.0490.0510.0551800.80Mounting hole dimensionsMounting holePermissible load N/pair Inner rail Outer railMass kg/pairNote) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL27S-P14 +500L Model numberOverall rail length (mm)A13-15Slide RailUnit: mm 15. Model FBL 35SStroke length S3Rail length L 0.8 G0.3 F0.3 E0.3 D0.3 111.10.3 4.55.315.90.5Access hole4.5 5.3101.60.3 A0.3 B0.3 25.40.512.70.3 25.40.3C0.3 Rail length (L-3) 0.89.50.5 Outer rail Inner rail 35.30.51.61.6RetainerCross sectionUnit: mmRail length Stroke L S ( 0.8) ( 3)Mounting hole dimensions ABCDEMounting holeFGPermissible load Mass N/pair kg/pair Inner rail Outer rail305229152.4 254.0149.2 260.3 273.0474900.6356279203.2 304.8200.0 311.1 323.8474000.7406305254.0 355.6250.8 361.9 374.6473900.8457330203.2 304.8 406.4 212.7 301.6 412.7 425.4583800.9508381228.6 355.6 457.2 238.1 352.4 463.5 476.2583301.0559406254.0 406.4 508.0 263.5 403.2 514.3 527.0583201.1610432279.4 457.2 558.8 288.9 454.0 565.1 577.8583101.2660483304.8 508.0 609.6 314.3 504.8 615.9 628.6582801.3711508330.2 558.8 660.4 339.7 555.6 666.7 679.4582701.4Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35S +457L Model numberA13-16Overall rail length (mm)To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 16. Model FBL 35S-P13 Rail length L0.8Stroke length S3 28.60.5F 0.3 E0.3 D 0.3 C0.3 98.40.3Access hole 4.55.312.70.3Lead stick101.60.34.55.3 Disconnection springA0.3 25.40.59.50.5 Outer railB0.3Inner railRail length (L-4) 0.8 35.30.51.61.6RetainerCross sectionRail length Stroke L S ( 0.8) ( 3)Mounting hole dimensions ABCDMounting holeEFPermissible load N/pair Inner rail Outer railMass kg/pair305224152.4136.5247.6260.3364900.6356275203.2187.3298.4311.1364000.72406315254.0238.1349.2361.9363900.84457330203.2406.4200.0288.9400.0412.7473800.96508381228.6457.2225.4339.7450.8463.5473301.04559406254.0508.0250.8390.5501.6514.3473201.16610432279.4558.8276.2441.3552.4565.1473101.24660483304.8609.6301.6492.1603.2615.9472801.36711493330.2660.4327.0542.9654.0666.7472701.48Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35S-P13 +559L Model numberOverall rail length (mm)A13-17Slide RailUnit: mm 17. Model FBL 35S-P14 Rail length L 0.8Stroke length S3 28.60.5F0.3 E0.3 D0.3 C0.3 98.40.3Access hole Lead stick4.55.3101.60.312.70.34.55.3Automatic free disconnection springA0.3 25.40.59.50.5 Outer railB0.3 Rail length (L-4) 0.8 35.30.5Inner rail 1.61.6RetainerCross section Unit: mmRail length Stroke L S ( 0.8) ( 3)Mounting hole dimensions ABCDMounting holeEFPermissible load N/pair Inner rail Outer railMass kg/pair305224152.4136.5247.6260.3364900.6356275203.2187.3298.4311.1364000.72406315254.0238.1349.2361.9363900.84457330203.2406.4200.0288.9400.0412.7473800.96508381228.6457.2225.4339.7450.8463.5473301.04559406254.0508.0250.8390.5501.6514.3473201.16610432279.4558.8276.2441.3552.4565.1473101.24660483304.8609.6301.6492.1603.2615.9472801.36711493330.2660.4327.0542.9654.0666.7472701.48Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35S-P14 +559L Model numberA13-18Overall rail length (mm)To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 18. Model FBL 35M Stroke length S3Rail length L 0.8 G 0.3 F0.3 E0.3 D0.3 111.1 0.3 4.55.315.90.5Access hole4.5 5.3101.60.3 A0.3 B0.3 25.40.512.70.3 25.40.3C 0.3 Rail length (L-4) 0.8 9.50.5 Outer rail Inner rail 35.30.51.61.6RetainerCross section Rail length Stroke L S ( 0.8) ( 3)Mounting hole dimensions ABCDEFGMounting hole Permissible load Mass N/pair kg/pair Inner rail Outer rail305229152.4 254.0149.2 260.3 273.0474900.6356279203.2 304.8200.0 311.1 323.8474000.7406305254.0 355.6250.8 361.9 374.6473900.8457330203.2 304.8 406.4 212.7 301.6 412.7 425.4583800.9508381228.6 355.6 457.2 238.1 352.4 463.5 476.2583301.0559406254.0 406.4 508.0 263.5 403.2 514.3 527.0583201.1610432279.4 457.2 558.8 288.9 454.0 565.1 577.8583101.2660483304.8 508.0 609.6 314.3 504.8 615.9 628.6582801.3711508330.2 558.8 660.4 339.7 555.6 666.7 679.4582701.4Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35M +406L Model numberOverall rail length (mm)A13-19Slide RailUnit: mm 19. Model FBL 35JStroke length S3Rail length L 0.8 G0.3 F0.315.90.5Access hole 4.55.3E0.3 D0.3 111.1 0.3 25.40.3 12.70.3Lead ball4.55.3101.60.3 A0.3 B0.39.50.5 Outer railC 0.3 Rail length (L-4) 0.8Inner rail 35.30.525.40.51.61.6RetainerCross section Unit: mmRail length Stroke L S ( 0.8) ( 3)Mounting hole dimensions ABCDEMounting holeFGPermissible load Mass N/pair kg/pair Inner rail Outer rail305229152.4 254.0149.2 260.3 273.0474900.6356279203.2 304.8200.0 311.1 323.8474000.7406305254.0 355.6250.8 361.9 374.6473900.8457330203.2 304.8 406.4 212.7 301.6 412.7 425.4583800.9508381228.6 355.6 457.2 238.1 352.4 463.5 476.2583301.0559406254.0 406.4 508.0 263.5 403.2 514.3 527.0583201.1610432279.4 457.2 558.8 288.9 454.0 565.1 577.8583101.2660483304.8 508.0 609.6 314.3 504.8 615.9 628.6582801.3711508330.2 558.8 660.4 339.7 555.6 666.7 679.4582701.4Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35J +660L Model number Overall rail length (mm)A13-20To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 20. Model FBL 35B Rail length L 0.8Stroke length S34.610.363.5 41.4 4.7 6.54.65.33 4.29.5 3.76.44.8 101.60 to 35 213.9139.7 3 4.65.3 2 4.3P11.647.912.7Mounting bracket3 4.8Rail length (L-4) 0.8Mounting bracket2 4.5 4.6 31.8 48.5 9.6Mounting bracket33 30.59.50.5(10.5)Inner rail6.8 23.94.6Mounting bracketRetainer4 35.30.5 (37.3)Outer rail(37.3)R4.55.2 9.5Cross sectionStroke S ( 3) 216Inner rail 771150.8375267771050.92425305771001Mounting hole Outer railPermissible load N/pairMass kg/pair47631877901.1252736877831.2457841977731.3262944577661.4467949577611.6Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35B +375L Model numberOverall rail length (mm)A13-21Slide RailUnit: mmRail length L ( 0.8) 324 21. Model FBL 35T Stroke length S 3Rail length L 0.8 C0.315.90.5(14.2)Access hole36.10.54.55.3B0.3 A0.3 111.10.3101.60.3 D0.3 E0.3 25.40.54.55.3 12.70.8 Cabinet railF0.3 Rail length (L-3) 0.871.40.8Drawer rail1.61.6Retainer Cross section Unit: mmRail length Stroke L S ( 0.8) ( 3) 305 227Mounting hole dimensionsMounting holeABCDEF149.2273.0152.8254.44Permissible load N/pairMass kg/pair411202.16Inner rail Outer rail356278200.0323.8203.6305.24410702.56406303250.8374.6254.4356.04410202.96457354212.7301.6425.4203.2305.2406.85510003.3508367238.1352.4476.2228.6356.0457.6559713.64559430263.5403.2527.0254.0406.8508.4559224.04610456288.9454.0577.8279.4457.6559.2558734.32660468314.3504.8628.6304.8508.4610.0558434.72711506339.7555.6679.4330.2559.2660.8557845.1Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35T +559L Model numberA13-22Overall rail length (mm)To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 22. Model FBL 27DStroke length S3Rail length L 0.8 B0.3 A0.3200.5 2- 4.5 (both ends)1000.3 200.34.26200.3 1000.3Access holeA0.3 B0.3 Rail length L0.8200.54.2 6Cabinet rail2- 4.5 (both ends)Center rail270.5Drawer rail1.61.6 Retainer 19.10.5 Cross sectionRail length L ( 0.8)Stroke S ( 3)200Mounting hole dimensionsMounting holePermissible load N/pair Cabinet railMass kg/pairABDrawer rail229140.0160.055370250276190.0210.0553600.8300327240.0260.0553500.96350376290.0310.0553301.12400426340.0360.0553101.28450475390.0410.0552901.46500524440.0460.0552801.60.64Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL27D +200L Model number Overall rail length (mm)A13-23Slide RailUnit: mm 23. Model FBL 35EStroke length S3Rail length L0.8 G0.3 F0.3 E0.319.10.5D0.3 25.40.3 A0.3 B0.3 19.10.54.55.3C0.3 Rail length (L-11) 0.8Rubber cushion 4.55.3Access hole1335.31.6 2.21.6 2.4 15.3 24.9Cross section Unit: mmRail length L ( 0.8)Stroke S ( 3)ABCDEF30533076.2154.976.2190.5241.3Mounting hole dimensions GPermissible load N/pairMass kg/pair266.72900.6356381127266.788.9215.9292.1317.52800.7406432152.4317.5127241.3342.9368.32700.9457483177.8368.3127292.1393.7419.12501.1508533152.4342.9419.1152.4317.5444.5469.92401.3Note1) To mount model FBL35E, use an M3 truss and binding machine screws. Note2) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35E +406L Model No.A13-24Overall rail length (mm)To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 24. Model FBL 35E-P14 Stroke length S3Rail length L 0.8 15.90.5Automatic free disconnection springD 0.3 C0.3 B 0.3 A0.3 111.10.3 25.40.3 12.70.312.70.3 25.40.34.55.3Access holeRubber cushion 4.55.3101.60.3 E0.3 F0.3130.5Outer rail Center rail35.30.51.6 1.61.615.3 24.9G0.3 Rail length (L-11) 0.815.90.5Inner rail Retainer Cross sectionMounting hole dimensionsRail length Stroke L S ( 0.8) ( 3)Mounting holeMass kg/pair305330149.2 260.3 273.0 233.1 254.0 266.72940.88356381200.0 311.1 323.8 258.5 304.8 317.5772841.04406432250.8 361.9 374.6 283.9 355.6 368.3772751.16457483212.7 301.6 412.7 425.4 309.3 406.4 419.1782551.32508533238.1 352.4 463.5 476.2 334.7 457.2 469.9782351.48BCDEFGOuter rail 7Permissible load N/pairInner rail 7ANote) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35E-P14 +508L Model numberOverall rail length (mm)A13-25Slide RailUnit: mm 25. Model FBL 35G-P13 Stroke length S3Rail length L0.8 E0.3 D0.315.90.5 123.80.3 12.70.3Disconnection spring Access hole4.55.3 A0.3F0.3 Lock mechanism4.55.312.70.3 25.40.3 111.1 0.3Lead stick B 0.3 C 0.3 D0.3 E0.3Rubber cushion Rubber cushion19.10.5 Cabinet rail15.90.5Drawer rail35.30.5Rail length (L-4) 0.8 1.61.6Retainer Center rail Cross section Unit: mmMounting hole dimensionsRail length Stroke L S ( 0.8) ( 3)ABMounting holeCDEFDrawer Cabinet rail rail 5 6Permissible load N/pairMass kg/pair305327260.3273.06231.2356378298.4311.1323.8665861.4406429349.2361.9374.6250.8675551.6457480212.7400.0412.7425.4301.6775161.8508530238.1365.1450.8463.5476.2352.4874752559581263.5415.9501.6514.3527.0403.2874442.2610632288.9466.7552.4565.1577.8454.0874132.4660683314.3517.5603.2615.9628.6504.8873822.6711734339.7568.3654.0666.7679.4555.6873552.8Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35G-P13 +356L Model numberA13-26Overall rail length (mm)To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 26. Model FBL 35G-P14 Rail length L0.8Stroke length S 3E0.3 D0.315.90.5 123.80.3 12.70.3Automatic free disconnection spring Access hole4.55.3 A0.3F0.3 Lock mechanism4.55.312.70.3 25.40.3 111.10.3Lead stick B0.3 C0.3 D0.3 E0.3Rubber cushion Rubber cushion19.10.5 Cabinet rail15.90.5Drawer rail35.30.5Rail length (L-4) 0.81.61.6Retainer Center rail Cross sectionMounting hole dimensionsRail length Stroke L S ( 0.8) ( 3)ABMounting holeCDEFDrawer Cabinet rail rail 5 6Permissible load N/pairMass kg/pair305327260.3273.06231.2356378298.4311.1323.8665861.4406429349.2361.9374.6250.8675551.6457480212.7400.0412.7425.4301.6775161.8508530238.1365.1450.8463.5476.2352.4874752559581263.5415.9501.6514.3527.0403.2874442.2610632288.9466.7552.4565.1577.8454.0874132.4660683314.3517.5603.2615.9628.6504.8873822.6711734339.7568.3654.0666.7679.4555.6873552.8Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35G-P14 +610L Model numberOverall rail length (mm)A13-27Slide RailUnit: mm 27. Model FBL 35D Rail length L 0.8Stroke length S3 15.90.5D0.3 C0.3 B0.3 A0.3 111.10.3 25.40.3 12.70.34.55.312.70.3 25.40.3 111.1 0.3 A0.3 B0.3 C0.3 D0.3 Rail length L 0.84.55.3Access hole19.10.5 Cabinet rail15.90.535.30.5Drawer rail1.61.6Retainer Center rail Cross section Unit: mmRail length L ( 0.8)Stroke S ( 3)Mounting hole dimensionsMounting holeMass kg/pair305327149.2260.3273.05881.28356378200.0311.1323.8775781.48406429250.8361.9374.6775591.72457480212.7301.6412.7425.4885491.96BCDCabinet rail 7Permissible load N/pairDrawer rail 7A508530238.1352.4463.5476.2885292.12559581263.5403.2514.3527.0885002.4610632288.9454.0565.1577.8884802.56660683314.3504.8615.9628.6884612.8711734339.7555.6666.7679.4884413Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35D +711L Model numberA13-28Overall rail length (mm)To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 28. Model FBL 35W 5 5 Rail length L 0.8 D 0.3 C 0.3 B 0.315.90.5A 0.3 111.1 0.3 25.4 0.3 12.7 0.3Rubber cushion 4.55.3Rubber cushion 12.70.8Access hole15.90.335.3 0.512.70.3 25.40.3 111.10.3 A0.3 B0.3 C0.3 D0.3 Rail length L0.84.5 5.31.6460.5Access holeDrawer rail Center rail 1.681.30.8Stroke length S 31.6Cross section Cabinet rail Note) The product has a rubber cushion. If desiring to keep the length within the rail length when storing the product, remove the rubber cushion. Unit: mmRail length L ( 0.8) 305 356 406 457 508 559 610 660 711Stroke S ( 3) 327 378 429 480 530 581 632 683 734Mounting hole dimensions ABCD 225.4 250.8 276.2 301.6 327.0 352.4149.2 200.0 250.8 301.6 352.4 403.2 454.0 504.8 555.6260.4 311.2 362.0 412.8 463.6 514.4 565.2 616.0 666.8273.1 323.9 374.7 425.5 476.3 527.1 577.9 628.7 679.5Mounting hole Drawer Cabinet rail rail 7 7 7 7 7 7 8 8 8 8 8 8 8 8 8 8 8 8Permissible load N/pairMass kg/pair706 676 637 598 569 520 480 422 3531.68 2 2.32 2.64 2.88 3.2 3.52 3.84 4.12Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35W +356L Model numberOverall rail length (mm)A13-29Slide RailRetainer 29. Model FBL 51H Rail length L0.8Stroke length S3 19.10.5G0.3 F0.3 E0.3 D0.3 25.40.34.55.3A0.3Access holeRubber cushion4.5 5.3B0.3 Outer rail 19.10.5C0.3Center rail t1.651.50.5Rail length (L-11) 0.8 1.6 Inner rail 1.8Retainer12.70.5 Cross section Unit: mmRail length L ( 0.8) 305 356 406 457 508 559 610 660 711 762Stroke S ( 3) 330 381 432 483 533 584 635 686 737 787Mounting hole dimensions ABCDEFG76.2 101.6 127.0 127.0 152.4 177.8 177.8 203.2 228.6 228.6177.8 203.2 228.6 279.4 304.8 330.2 381.0 406.4 431.8 457.2254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6 660.4 711.276.2 88.9 127.0 127.0 152.4 177.8 177.8 203.2 228.6 228.6190.5 215.9 241.3 292.1 317.5 342.9 393.7 419.1 444.5 469.9241.3 292.1 342.9 393.7 444.5 495.3 546.1 596.9 647.7 698.5266.7 317.5 368.3 419.1 469.9 520.7 571.5 622.3 673.1 723.9Mounting hole Inner Outer rail rail 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6Permissible load Mass N/pair kg/pair 850 820 770 730 710 690 660 630 610 5801.46 1.72 1.89 2.26 2.52 2.72 3.00 3.25 3.54 3.86Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL51H +610L Model numberA13-30Overall rail length (mm)To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 30. Model FBL 51H-P13 Stroke length S3 19.10.54.5 5.3Disconnection springLead stickRail length L 0.8 G0.3 F 0.3 E0.3 D0.3 Lock 25.40.3 mechanismAccess holeA 0.3 19.10.54.5 5.3Rubber cushionB0.3 C0.3Outer rail Center rail t1.651.50.5Rail length (L-11) 0.8Inner rail 1.6 Retainer1.812.70.5 Cross sectionRail length L ( 0.8)Stroke S ( 3)305 356Mounting hole dimensionsMounting holePermissible load Mass N/pair kg/pair190.5 241.3 266.7Inner rail 3Outer rail 68501.46215.9 292.1 317.5368201.72304.8 127.0 241.3 342.9 368.3367701.89483127.0 317.5 368.3 127.0 292.1 393.7 419.1467302.26508533152.4 355.6 406.4 152.4 317.5 444.5 469.9467102.52559584177.8 381.0 457.2 177.8 342.9 495.3 520.7466902.72610635177.8 430.8 508.0 177.8 393.7 546.1 571.5466603.00ABCD33076.2190.576.2381101.6266.788.9406432127.0457EFG660686203.2 457.2 558.8 203.2 419.1 596.9 622.3466303.25711737228.6 508.0 609.6 228.6 444.5 647.7 673.1466103.54762787228.6 533.4 660.4 228.6 469.9 698.5 723.9465803.86Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL51H-P13 +559L Model numberOverall rail length (mm)A13-31Slide RailUnit: mm 31. Model FBL 51H-P14 Rail length L 0.8Stroke length S3 19.10.5G0.3 F0.3 E0.3Automatic free disconnection spring4.55.3D0.3 25.40.3Lead stickA0.3Rubber cushion 4.55.3Access holeB0.3Outer rail Center rail t1.6C0.319.10.551.5 0.5Rail length (L-11) 0.81.6 Inner rail 1.8Retainer12.70.5 Cross section Unit: mmRail length L ( 0.8)Stroke S ( 3)Mounting hole dimensionsMounting hole30533076.2254.076.2190.5 241.3 266.78501.46356381127.0304.888.9215.9 292.1 317.5368201.72406432152.4 317.5 355.6 127.0 241.3 342.9 368.3467701.89457483177.8 368.3 406.4 127.0 292.1 393.7 419.1467302.26BCDEFGOuter rail 6Permissible load Mass N/pair kg/pairInner rail 3A508533152.4 419.1 457.2 152.4 317.5 444.5 469.9467102.52559584177.8 469.9 508.0 177.8 342.9 495.3 520.7466902.72610635177.8 520.7 558.8 177.8 393.7 546.1 571.5466603.00660686203.2 571.5 609.6 203.2 419.1 596.9 622.3466303.25711737228.6 622.3 660.4 228.6 444.5 647.7 673.1466103.54762787228.6 673.1 711.2 228.6 469.9 698.5 723.9465803.86Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL51H-P14 +305L Model numberA13-32Overall rail length (mm)To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 32. Model FBL 35K 5 5Stroke length S3 15.90.536.14.55.3Rail length L 0.8 C0.3 B0.3 A 0.3 111.10.3 4.5 5.3Rubber cushionAccess holeRubber cushion Cabinet rail t=1.6 Center rail t=1.615.90.571.4 0.8111.10.3 A 0.3 B 0.3 C 0.3 Rail length L0.81.61.6Drawer rail t=1.6Cross section Note) The product has a rubber cushion. If desiring to keep the length within the rail length when storing the product, remove the rubber cushion. Unit: mmRail length L ( 0.8) 305 356 406 457 508 559 610 660 711Stroke S ( 3) 327 378 429 480 530 581 632 683 734Mounting hole dimensions ABC 212.7 238.1 263.5 288.9 314.3 339.7149.2 200.0 250.8 301.6 352.4 403.2 454.0 504.8 555.6273.0 323.8 374.6 425.4 476.2 527.0 577.8 628.6 679.4Mounting hole Permissible load Drawer Cabinet N/pair rail rail 4 4 2670 4 4 2630 4 4 2540 5 5 2450 5 5 2360 5 5 2250 5 5 2120 5 5 1960 5 5 1780Mass kg/pair 4.04 4.8 5.6 6.04 6.92 7.56 8.4 9 9.68Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35K +711L Model numberOverall rail length (mm)A13-33Slide Rail23.90.8 33. Model FBL 56H Rail length L 0.8Stroke length S3 19.10.5G0.3 F0.3 E0.3 D0.3 25.40.34.55.3Access holeRubber cushion 4.55.3 Outer railA0.3 B0.3 19.10.5Center rail t=1.6 C0.3Inner railRail length (L-9.5) 0.8 2.0 560.52.0Retainer160.5 Cross section Unit: mmRail length L ( 0.8) 305 356 406 457 508 559 610 660 711 762Stroke S ( 3) 330 381 432 483 533 584 635 686 737 787Mounting hole dimensions ABCDEFG76.2 101.6 127.0 127.0 152.4 177.8 177.8 203.2 228.6 228.6177.8 203.2 228.6 279.4 304.8 330.2 381.0 406.4 431.8 457.2254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6 660.4 711.276.2 88.9 127.0 127.0 152.4 177.8 177.8 203.2 228.6 228.6190.5 215.9 241.3 292.1 317.5 342.9 393.7 419.1 444.5 469.9241.3 292.1 342.9 393.7 444.5 495.3 546.1 596.9 647.7 698.5266.7 317.5 368.3 419.1 469.9 520.7 571.5 622.3 673.1 723.9Mounting hole Inner Outer rail rail 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6Permissible load N/pairMass kg/pair961 951 941 922 902 882 863 843 824 7841.76 2.04 2.36 2.64 2.96 3.24 3.6 3.84 4.06 4.44Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL56H +406L Model numberA13-34Overall rail length (mm)To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 34. Model FBL 56H-P13 Stroke length S3Rail length L 0.8 G0.3 F0.3 E0.319.10.5 Disconnection spring 4.55.3D0.325.4 0.3Lock mechanismA0.3 B0.3 19.10.54.5 5.3Lead stickC0.3Rubber cushionAccess holeRail length (L-11) 0.8Outer rail Center rail t=1.6 Inner rail560.5Retainer 2.02.0160.5 Unit: mmRail length L ( 0.8) 305 356 406 457 508 559 610 660 711 762Stroke S ( 3) 330 381 432 483 533 584 635 686 737 787Mounting hole dimensions ABCDEFG76.2 127.0 152.4 177.8 152.4 177.8 177.8 203.2 228.6 228.6 317.5 368.3 419.1 469.9 520.7 571.5 622.3 673.1254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6 660.4 711.276.2 88.9 127.0 127.0 152.4 177.8 177.8 203.2 228.6 228.6190.5 215.9 241.3 292.1 317.5 342.9 393.7 419.1 444.5 469.9241.3 292.1 342.9 393.7 444.5 495.3 546.1 596.9 647.7 698.5266.7 317.5 368.3 419.1 469.9 520.7 571.5 622.3 673.1 723.9Mounting hole Inner Outer rail rail 3 6 3 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6Permissible load N/pairMass kg/pair961 951 941 922 902 882 863 843 824 7841.76 2.04 2.36 2.64 2.96 3.24 3.6 3.84 4.06 4.44Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL56H-P13 +762L Model numberOverall rail length (mm)A13-35Slide RailCross section 35. Model FBL 56H-P14 Stroke length S3Rail length L 0.8 G 0.3 F0.3 E0.319.10.5 Automatic free disconnection springD 0.3 25.40.3Lead stick4.55.3A0.3 Access holeB0.3 19.10.5C0.3 Rail length (L-11) 0.84.5 5.3 Rubber cushion Outer rail Center rail t=1.6 Inner rail560.5Retainer 2.02.0160.5 Cross section Unit: mmRail length L ( 0.8) 305 356 406 457 508 559 610 660 711 762Stroke S ( 3) 330 381 432 483 533 584 635 686 737 787Mounting hole dimensions ABCDEFG76.2 127.0 152.4 177.8 152.4 177.8 177.8 203.2 228.6 228.6 317.5 368.3 419.1 469.9 520.7 571.5 622.3 673.1254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6 660.4 711.276.2 88.9 127.0 127.0 152.4 177.8 177.8 203.2 228.6 228.6190.5 215.9 241.3 292.1 317.5 342.9 393.7 419.1 444.5 469.9241.3 292.1 342.9 393.7 444.5 495.3 546.1 596.9 647.7 698.5266.7 317.5 368.3 419.1 469.9 520.7 571.5 622.3 673.1 723.9Mounting hole Inner Outer rail rail 3 6 3 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6Permissible load N/pairMass kg/pair961 951 941 922 902 882 863 843 824 7841.76 2.04 2.36 2.64 2.96 3.24 3.6 3.84 4.06 4.44Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL56H-P14 +457L Model numberA13-36Overall rail length (mm)To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 36. Model FBL 35F Rail length L 0.8 Stroke length S 3A 0.8 B 0.36.21.6 84 4.5101.60.34.55.31.6600.8 47.6 0.3Access holeC 0.3 D0.3 E 0.3 25.40.5Mounting plate Outer rail Mass305 356 406 457 508 559 610 660 711 762Mounting plate Model No. #3 0.60 0.66 0.73 0.80 0.86 0.93 1.0 1.06 1.13 1.20#4 0.67 0.73 0.80 0.87 0.93 1.0 1.07 1.13 1.20 1.27#5 0.74 0.80 0.87 0.94 1.0 1.07 1.14 1.20 1.27 1.34#6 0.81 0.87 0.94 1.01 1.07 1.14 1.21 1.27 1.34 1.41#7 0.94 1.01 1.08 1.14 1.21 1.28 1.34 1.41 1.48#8 1.01 1.08 1.15 1.21 1.28 1.35 1.41 1.48 1.55Retainer 35.3 0.5Rail length L ( 0.8) mmInner railUnit: kg/pair1.69.5 11.1 0.51.6Cross sectionNote) The mass indicates the value for a pair of 2 product units.Mounting plateModel No.#3#4#5#6#7#8Length (A 0.8)76.2101.6127152.4177.8203.2Rail length L ( 0.8) Stroke length S ( 3) Varies with the combination with the mounting plate above. 305 225.4 200.0 174.6 149.2 356 276.2 250.8 225.4 200.0 174.6 149.2 406 327.0 301.6 276.2 250.8 225.4 200.0 457 377.8 352.4 327.0 301.6 276.2 250.8 508 428.6 403.2 377.8 352.4 327.0 301.6 559 479.4 454.0 428.6 403.2 377.8 352.4 610 530.2 504.8 479.4 454.0 428.6 403.2 660 581.0 555.6 530.2 504.8 479.4 454.0 711 631.8 606.4 581.0 555.6 530.2 504.8 762 682.6 657.2 631.8 606.4 581.0 555.6 Pitch of the mounting plate mounting hole 60.2 85.6 111.0 136.4 161.8 187.2 (B 0.3) Permissible load (N/pair) 294 392 490 588 686 784Dimension of the outer rail mounting hole ( 0.3) C 203.2 228.6 254.0 279.4 304.8 330.2 355.6D 152.4 203.2 254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6E 254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6 660.4 711.2Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL35F +356L #5 Model numberModel number of mounting plateOverall rail length (mm)A13-37Slide RailUnit: mm 37. Model FBL 56F 4 4.52 4.55.3Access hole800.8 67.60.32 8Outer rail length L0.8 Stroke length S3A0.8 B0.36.2101.60.3 C0.3160.5D0.3Mass305 356 406 457 508 559 610 660 711 762Inner railUnit: kg/pairMounting plate Model No. #3 1.16 1.32 1.46 1.59 1.73 1.87 2.0 2.14 2.28 2.41#4 1.31 1.44 1.58 1.71 1.85 1.99 2.13 2.26 2.40 2.54#5 1.43 1.57 1.70 1.84 1.98 2.11 2.25 2.39 2.52 2.66#6 1.55 1.69 1.83 1.96 2.10 2.24 2.37 2.51 2.65 2.78#7 1.81 1.95 2.09 2.22 2.36 2.50 2.63 2.77 2.912#8 1.94 2.07 2.21 2.35 2.48 2.62 2.76 2.89 3.03560.5Rail length L ( 0.8) mm140.5E0.325.40.52Retainer Outer rail Mounting plate 2Cross sectionNote) The mass indicates the value for a pair of 2 product units. Unit: mmMounting plateModel No.#3#4#5#6#7#8Length (A 0.8)76.2101.6127152.4177.8203.2Rail length L ( 0.8) Stroke length S ( 3) Varies with the combination with the mounting plate above. 305 224.6 199.2 173.8 148.4 356 275.4 250.0 224.6 199.2 173.8 148.4 406 326.2 300.8 275.4 250.0 224.6 199.2 457 377.0 351.6 326.2 300.8 275.4 250.0 508 427.8 402.4 377.0 351.6 326.2 300.8 559 478.6 453.2 427.8 402.4 377.0 351.6 610 529.4 504.0 478.6 453.2 427.8 402.4 660 580.2 554.8 529.4 504.0 478.6 453.2 711 631.0 605.6 580.2 554.8 529.4 504.0 762 681.8 656.4 631.0 605.6 580.2 554.8 Pitch of the mounting plate mounting hole 60.2 85.6 111.0 136.4 161.8 187.2 (B 0.3) Permissible load (N/pair) 588 784 980 1176 1372 1568Dimension of the outer rail mounting hole ( 0.3) C 203.2 228.6 254.0 279.4 304.8 330.2 355.6D 152.4 203.2 254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6E 254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6 660.4 711.2Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingFBL56F +305L #6 Model numberModel number of mounting plateOverall rail length (mm)A13-38To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 38. Model FBL 48DRRail length L1 Inner rail length L22 20 4040P35040Stroke length S 4030n- 6 through206-M5 through2Access holeA30 7.3 Inner rail28.248 2 2 Retainer Outer rail t=1.6 11.2Reinforced channelCross section Unit: mmOuter rail length Inner rail length Stroke length Mounting hole pitch No. of mounting holes Permissible load L1 L2 S A n [N] 1110 496 610 P3503 4 490 1110 696 410 P3503 4 686 1460 496 960 P3504 5 490 1460 696 760 P3504 5 686 1810 696 1110 P3505 6 686 2160 496 1660 P3506 7 490 2160 696 1460 P3506 7 686Mass [kg] 2.73 2.88 3.47 3.62 4.36 4.95 5.10Note1) Set the length of the mounting screws for the inner rail such that they do not touch the retainer. Note2) Model FBL48DR differs from other slide rails by assuming use with a single rail. Therefore, the value is per single rail for permissible load.Model number codingFBL48DR +1810/696L Model numberOuter rail length L1 (mm)Inner rail length L2 (mm)A13-39Slide Rail14.6 39. Model E36RS Rail length L 0.8n 10025Permissible load100 0.3(25)Countersink for (n+1)-M46 Stroke length S376 120.5 8(12.5)1.6(52)360.5500.1Slider 600.3Outer rail4- 4.5(4 )(45)Resin bearing 50.752600.1 700.35Unit: mmRail length L ( 0.8) 150 250 350 450 550 650 750Stroke length S ( 3) 68 168 268 368 468 568 668n 1 2 3 4 5 6 7Mounting hole n+1 2 3 4 5 6 7 8Note1)Permissible load N 40 40 40 40 40 40 40Mass g 104 130 156 182 207 233 259Note) Model E36RS differs from other slide rails by assuming use with a single rail. Therefore, the value is per single rail for permissible load.Model number codingE36RS +550L Model number Rail length (mm)A13-40To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 40. Model E15Rail length L0.8Stroke length S3 100.5A0.3 Access hole2-M3 throughA0.3100.5Countersink for 2-M2.6 (for class 1 countersink screw No. 0)Rail length L0.84.5Outer rail19150.5Inner rail50.5BallCross sectionRail length L ( 0.8)Stroke S ( 3)Mounting hole dimensions A 0.3Permissible load N/pairMass [g/pair]502030.0515804560.08241006080.0103012075100.01036Note) The Permissible Load and Mass each indicate when used as a pair of 2 units.Model number codingE15 +100L Model number Overall rail length (mm)A13-41Slide RailUnit: mm 41. Model E20Stroke length S 3Rail length L 0.8 B 0.3150.5n-M4 throughA0.3(Access hole)A 0.3 150.5n- 3.5 90 countersunk ( 6)B 0.3 Rail length L 0.87.2 Outer rail12200.51.6Inner rail 8 0.5BallCross sectionUnit: mmMounting hole dimensionsRail length L ( 0.8)Stroke S ( 3)A 0.3B 0.3804550.010060150 200 300180n (pcs)Permissible load N/pairMass [g/pair]2205070.0230628560.0120.03809812085.0170.03140131135.0270.03145197Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingE20 +150L Model number Overall rail length (mm)A13-42To download a desired data, search for the corresponding model number in the Technical site.https://tech.thk.com 42. Model D20Rail length L0.8Stroke length S3 150.5Countersunk for n-M3A0.3 150.5B0.3 A0.3Countersunk for n-M3Access holeB0.3 Rail length L0.8 7.2 Center rail200.5 12Cabinet rail1.6BallDrawer rail 160.5Unit: mmMounting hole dimensionsRail length L ( 0.8)Stroke S ( 3)A 0.3B 0.3808050.0100100150n (pcs)Permissible load N/pairMass [g/pair]2209470.023011816060.0120.038017920022385.0170.03140241300345135.0270.03145364Note) The Permissible Load and Mass each indicate when used as a pair of 2 units. Model number codingD20 +300L Model number Overall rail length (mm)A13-43Slide RailCross section 43. Point of DesignSlide Rail[Permissible Load and Mounting Orientation] For use other than with the mounting orientation shown in Fig.1, contact THK. The permissible load of the Slide Rail indicates the load in the direction Pa that two rails can receive in the middle of the inner rail length at the maximum stroke. The mounting orientation shown in Fig.2 is applicable to model FBL35B only.TopPaPaBottom Fig.1Top PaPaBottom Fig.2 Applicable to model FBL35B onlyA13-44 44. Point of Design The mounting orientation of Fig.3 is applicable to model FBL35F and model FBL56F. The mounting orientation of Fig.4 is applicable to model FBL48DR. To prevent a moment load from being applied, position the center of gravity of the door on the ball and the cage center lines, and ensure that the section A of the hanger is structured to allow free rotation. The mounting orientation of Fig.5 is applicable to model E36RS. Unlike other slide rails, model FBL48DR and model E36RS are used with a single rail. Therefore, set the load application position so that it is on the ball and the cage center lines. TopPaPa BottomFig.3 Applicable to model FBL35F, model FBL56FRail bearing Suspended fittingInner rail center axisCenter of gravitySection A DoorCenter of gravityBall center axisSlide RailFig.4 Applicable to model FBL48DRTopBottom PaPa Fig.5 Applicable to model E36RS[Surface Treatment] The surface of the Slide Rail is electro-galvanized (treated with trivalent chromate) as standard. The aluminum slide rail of models E and D is white alumite-treated as standard. The slider of model E36RS is electro-galvanized (trivalent chromate treatment) and the rail is white alumite-treated as standard. For other surface treatments, contact THK.A13-45 45. Model No.Slide RailModel Number Coding Model number con gurations differ depending on the model features. Refer to the corresponding sample model number con guration. [Single slide/Double slide]Models FBL 27S, FBL 27S-P14, FBL 35S, FBL 35S-P13, FBL 35S-P14, FBL 35M, FBL 35J, FBL 35B, FBL 35T, FBL 27D, FBL 35E, FBL 35E-P14, FBL 35G-P13, FBL 35G-P14, FBL 35D, FBL 35W, FBL 51H, FBL 51HP13, FBL 51H-P14, FBL 35K, FBL 56H, FBL 56H-P13 and FBL 56H-P14FBL27S +300L Model No.Overall rail length (in mm)[Linear Type Slides]Models FBL35F and FBL56FFBL35F +356L #5 Model No.Model number of mounting plate Overall rail length (in mm)[Heavy Load Linear Type Slide]Model FBL48DRFBL48DR +1810/696L Model No.Outer rail length Inner rail length (in mm) (in mm)[Linear Slide Wheel-type]Model E36RSE36RS +550L Model number Rail length (mm)A13-46 46. Model No. [Aluminum Alloy Slide Rail]Models E15, E20 and D20E15 +100L Model No. Overall rail length (in mm)Slide RailA13-47 47. Precautions on UseSlide Rail[Handling] (1) Tilting a slide rail may cause it to fall by its own weight. (2) Dropping or hitting the Slide Rail may damage it. Giving an impact force to the slide rail could also cause damage even if the product looks intact. [Precautions on Use] (1) When mounting the Slide Rail, use care to always keep both rails in parallel. (2) Entrance of foreign material may cause damage to the Slide Rail or functional loss. (3) Avoid using the product at other than normal temperature, or using it in harsh conditions such as intensive reciprocations that generate frictional heat and environments with water or dust. (4) The durability of the Slide Rail varies depending on factors such as the drawing dimension, travel distance, mounting conditions and environment in addition to operating frequency. Take these factors into account when making a selection. (5) Note that the cage may be displaced due to vertical installation, machine vibration, etc. To correct the cage position, perform the full-close and full-open operations. During these operations, the balls slip to make the sliding motion less smooth. If cage displacement cannot be prevented, we recommend using Slide Packs, LM Guides, etc., which are in nite linear motion systems. (6) If you replace an old slider or outer rail of your E36RS with a new one, the clearance and sliding resistance may substantially increase. [Storage] When storing the Slide Rail, avoid high temperature, low temperature and high humidity.A13-48