Slic3r Setting (Slicing Software)9ygjXYwS.pdfSlic3r is a tool for 3D printer that converts digital...
Transcript of Slic3r Setting (Slicing Software)9ygjXYwS.pdfSlic3r is a tool for 3D printer that converts digital...
Slic3r Setting (Slicing Software)
1. Overview
Slic3r is a tool for 3D printer that converts digital 3d model to command
the understanding of a 3d printer. This model is converted into a
horizontal layer and generates the right path to fill. This manual will
provide guidance on how to install, configure, and use Slic3r in order to
produce good printing.
2. Slicing Interface of Repetier-Hose
3. Setting
1) Click “setting” into Simulation Parameters
2) Print Settings
Layers and surface setting
Infilling setting
Skirt and brim setting
Support Supplies Setting
Speed setting
Multiple Extruders setting
Advanced
Output Options
Save every step of setting
3)Filament Settings
Filament
Cooling
Save every step of setting
4)Printer Setting
General
Custom G-code
Extruder
Save every step of setting
5)Choose Slicing Software you need
3. Summary
There are many setting for Slicing software, what we actually need to
adjust the parameters is not that much, in the case of print and reliable,
you can raise the printing speed according to your own needs so that it
can shorten the printing time. It is worth noting that the several key
parameters: the nozzle diameter, the diameter of consumables, print size,
speed, temperature, platform.