SL-1

About KVAL Machinery KVAL was started in the mid 1940’s by AA Kvalheim. A Norwegian trained furniture maker, who turned to cabinetmaking and carpentry, and eventually machinery manufacturing after immigrating to the United States. One prod-uct produced in the mid 40’s was a panel saw which helped expand the fledgling flush door industry that was developing around the Walled Lake, Michigan area. Early door sizing systems were supplied to companies like Young Door, Walled Lake, Arrow Door, and out on the west coast to Cal Wood Door. In the mid 1950’s, sons Andy and Irv Kvalheim joined in the business. As the company grew, so did the line of products. Door pre-hanging equipment was designed for distributors and high production equipment was designed for manufacturers producing pre-fit units. During the growth years of the 60’s, the company continued as an innovator in the industry with automatic machines for jamb processing, casing trimmers and updated door siz-ers. As the 70’s began, customers began demanding even more automa-tion to cut labor costs and improve product quality. Kval responded with bi-fold door assembly and pre-hanging machines featuring fully automatic screw driving systems. Today, Jerry, David, and Mark Kvalheim…the three grandsons of AA Kval-heim have joined the firm. The company family has also grown to include George Kameoka as head engineer, and Mark Smith as one of the manag-ing partners. KVAL products have continued to evolve and are now faster than ever, but are easier to set up, and produce higher quality doors than ever be-fore. Recent technical innovations include CNC controls and the complete replacement of air logic control systems with solid state programmable con-trollers. Fully automatic positioning and sequencing for door and jamb equipment. Digital readouts with touchscreen controls to guarantee accu-rate setup and operation. When looking for quality door, jamb, casing, and related machines, look to the leader in the industry for over six decades! Look to KVAL!!!

© KVAL Inc. All rights reserved

This document may not be copied, photocopied, reproduced, transmitted, or translated in any form or for any purpose without the express written consent of KVAL Inc.

KVAL Inc. reserved the rights, without notice, to change design and construction of any products.

Price are subject to change without notice. Errors in description, photography, or typographical errors are subject to correction.

Printed in the United States of America

Published on 2/2/2011

Making Quality Door and Jamb Machinery Since 1947

INNOVATION | QUALITY | HONESTY Order Today!

Call 1.800.553.5825

3 Track Your Order Online at STORE.KVALINC.COM

To see our full line of products,

go to kvalinc.com and type in SL-1 Find

SL

-1

SL-1

KVAL's SL-1 Straight Lift is designed to lift doors and smooth sheet materials from a stack into processing equipment or to off-feed and re-stack. Features include a 200 lb. lifting capacity with 55” of vertical travel. Thumb- operated toggle switches turn vacuum on or off and raise or lower lifting cylinder. The handle is designed to telescope in and out 14” for wide or narrow doors by releasing a wing lever. Operates on 90 PSI shop air and requires no electricity. Unit is complete with vacuum filter and filter-regulator-lubricator. SPECIFICATIONS Crated Dimensions: 75"L x 32"W x 24"H Shipping Weight: with Trolley 200 lbs. 12' Track 50 lbs. 25" Track 100 lbs. Option A: 12’ Overhead Track System for 11’ Travel All necessary parts to build up overhead track and trolley system. Includes 12’ length of 5” aluminum “I” beam, coiled air line, hanger and trolley with 3-1/2” diameter ball bearing wheels for easy rolling with up to 11’ of travel. Option B: 25’ Overhead Track System for 20’ Travel All necessary parts to build up overhead track and trolley system. Includes 25’ length of 5” aluminum “I” beam, coiled air line, hanger and trolley with 3-1/2” diameter ball bearing wheels for easy rolling with up to 20’ of travel. Option H: 23' Spanco Monorail Crane Model# MT-8-23-600 600 series track, hoist trolley, fes-toon trolleys, 3/8" ID air lines. 1,000 capacity. Includes (8) sway brace brackets. Option J: Spanco Bridge Crane Option S: Modification for Special Ceiling Height Option T: Trolley for Overhead 5" I-Beam

4 KVALINC.COM More Products Online



Call 1.800.553.5825

SL

-1

Replacement Parts

Spring 11/16-OD X 1/2-ID X 1-3/8 Long, Lower Spring for SL-1 Vacuum Cup. KVAL P/N: 220112L

Brass Elbow 90-Degree Street 1/4 Female to 1/4 Male Pipe Thread KVAL P/N: 2202P44

Brass Street Tee 1/4 Female to Female to Male Pipe Thread KVAL P/N: 2225P04

Vacuum Cup Support Plate for the SL-1. KVAL P/N: 24-00-F

Trolley Roller for the SL-1 KVAL P/N: 24-00-P

Spring, 13/16-OD X 1/2-ID X 1-1/8 Long, .125 with Coil Ground Upper Spring 5030 Vacuum Cup for SL-1 KVAL P/N: 260104A

Fittings, Parker Push Lok 1/4 MP - 3/8 Barb KVAL P/N: 3018246B

Spring 1-OD 13/16-ID 8-1/2" Long, 990 .120 Wire Hooked Ends KVAL P/N: 320816H

Cylinder, Advance, I Series, 3-1/4 ID 58 Tube 55ST 1" Rod 1-14 THD 1" Rod Ext KVAL P/N: ADV8DA058

Arrow EK9052-25 Vacuum Air Filter Repair Kit (Cartridge and Gasket) KVAL P/N: AEK905225

Cylinder, Advance, Repair Kit, I Series, 2-1/2 KVAL P/N: ADV8CAM05

Hose, 3/8” Push-Lok, Gray Air Hose KVAL P/N: PAR80016

Tubing, Polyurathane Tubing, 1/4" OD KVAL P/N: SMCTIUB07C-66FT

Cylinder, Advance, Repair Kit, I Series, 3-1/4 KVAL P/N: ADV8DAM05

Filter, Arrow, In-Line Vacuum Filter, 25 Mi-cron, 9052-25 KVAL P/N: ARR905225

Handle Bar Grips, Black, 5" Long KVAL P/N: BIKEGRIPS

Black End Cap for BikeGrips, EC07 KVAL P/N: BIKE-EC07

Shuttle Valve, 1/8", SV10B, NPT, Deltrol KVAL P/N: DELSV10B

Spare

Spare

Spare

Spare

Spare

Spare




SL

-1

Spare Parts

Valve, Humphrey, 4-Way Rocker 3-Position, Spring Return. KVAL P/N: HUM41RS3

Air Hose, 1/4" ID X 12', Blue With 1/4 NPT Swivel Fittings, Nycoil,H4AS3-12 KVAL P/N: NYC14410

Speed Controller, In-line, 1/4" KVAL P/N: SMCAS3002

Foam Disc 16" Closed Cell for 5030 Vacuum Cup KVAL P/N: STR5030S2

Hoist Ring, 2500 lbs Capacity, 360 Deg. Swivel, 180 Deg. Pivot KVAL P/N: ADB23004

Handle, Kip 5/16-18 Thread, 1.26 Long Stud, Adjustable KVAL P/N: KIP38152

Air, Muffler, 1/4 Thread, Bronze Screen KVAL P/N: MUFFLER04

Air, Vacuum Generator, #Z-019, No Gauge, No Silencer KVAL P/N: NORZ019

Eye Bolt, 5/16-18 Thread, 1" Long KVAL P/N: EB312100

Foam, Vacuum Cup Assembly, 16 Closed Cell Neoprene With Foam Disc KVAL P/N: STR503016

Valve,NVSA4314-00O,SMC 4-Way Double Pilot, Without Base, Pilot Self Centering KVAL P/N: SMCNVSA07

Vacuum Gauge, Vacuum 30 To 0 In. Hg, Dial Size 2 In., Connection Size 1/4 In NPT KVAL P/N: GRA4FLT5

Air Piloted Valve, Humphrey 250A-3-10-20, Normally Closed 1/4" (6.4mm), 3-Way Pilot KVAL P/N: HUM250A01

Valve, Humphrey, 3P Spring Return Normally Closed. KVAL P/N: HUM3P

Valve, Humphrey, 4-Way Rocker 3-Position, Detented Valve, Spring Return. KVAL P/N: HUM41RDS3

Valve, Humphrey, 4-Way Toggle 3-Position, Detented Valve, Spring Return KVAL P/N: HUM41TDS3

Valve, Humphrey, 4-Way Toggle 3-Position Spring Return KVAL P/N: HUM41TS3

Spare Spare

Base,1/4 NVSA,SP 0112,SMC Valve KVAL P/N: SMCSP0112

6 KVALINC.COM More Products Online



Call 1.800.553.5825

SL

-1

Replacement Parts

Hydraulic Oil, 1 Gal Container KVAL P/N: SYSLUBG

Wheel, 3" Dia. X 1-1/4" Wide 3/8" ID Wheel With Simi Precision Roller Bearing KVAL P/N: INDXS0303106

Filter,Mini,1/4,SMC Filter, AF20-N02-CZ KVAL P/N: SMC20001F

Lubricator,Mini,1/4,NAL 2000-N02G,SMC Filter KVAL P/N: SMC20001L

Regulator, 1/4" Mini With Check Valve (1/8" Body with 1/4" Ports) KVAL P/N: SMC20001R

Pressure Gauge, SMC, K40, 1/8 NPT Thread, 160 PSI KVAL P/N: SMCK10 Spare

Plastic Engraved Label, SL-1, Machine Name, Silver KVAL P/N: LBL-24

Plastic Engraved Label, SL-1, Vacuum - Up, Beveled Edges KVAL P/N: LBL-0-039

Plastic Engraved Label, SL-1, Danger Do Not Lift Unless Gauge Reads Between -10Hg & -30HG, Beveled Edges KVAL P/N: LBL-0-040

Plastic Engraved Label, SL-1, Release - Down, Beveled Edges KVAL P/N: LBL-0-041

Plastic Engraved Label, SL-1, Handle Length Adjustment, Beveled Edges KVAL P/N: LBL-0-042

Plastic Engraved Label, SL-1, Warning Vary Arm Positioning To Prevent Repetitive Motion Strain, Beveled Edges KVAL P/N: LBL-0-043




SL

-1

Published on 2/2/2011

Parts Department

Monday thru Thursday 6:00 a.m. to 4:00 p.m. Pacific Time

Friday

6:00 a.m. to 1:00 p.m.

Email: [email protected]

SL-1

Documents

Transcript of SL-1