Sky Brochure
-
Upload
clearvision-lighting -
Category
Documents
-
view
218 -
download
0
description
Transcript of Sky Brochure
Sky2
Large area feature lighting
1.0
000001
Clearvision overview
Clearvision Lighting has a 15-year pedigree in ergonomic and environmental lighting. We have been at the leading edge of the industry in adopting new technology and design techniques to improve workplaces and reduce energy consumption.
Our appreciation of daylight has been apparent from the beginning. One of our first innovations in ergonomics was Virtual Daylight® in 1997, which has since been copied by many other companies.
We focus on lens technologies (some patented) that are central to our most successful products. We find that they’re an effective means of optimising design between efficiency, glare control and useful light distribution.
Clearvision is a project lighting company with a focus on customer applications for our products. We therefore provide a full technical support service–including Dialux (plug-in available), AutoCAD, emergency test and control systems.
Please contact our technical department for design and product related questions and sales for project quotations. All queries can be addressed to [email protected] or on 01252 344011.
Key features of the Sky2 range
• High efficiency
• High wall illuminance (LG7)
• Wide light distribution
• Integral controls (optional at extra cost)
• White (RAL 9010) as standard
Order codes Code
Sky2 SKY2-
BodySuspended -SUS
Surface -SFC
Recessed -RCD
Light source Lumens8 x 28W -828 20800
8 x 54W -854 35600
8 x 28W FXC (Circadian) -FXC-828
8 x 54W FXC (Circadian) -FXC-854
12 x 28W FX (RGB) -FX-1228
10 x 54W FXW (RGB) -FXW-1054
Dimming & controlsDSI -DSI
1-10V analogue -110
DALI -DALI
Switch dimming -SD
S-Linc (Master)* -SLM
S-Linc (Slave)* -SLS
*Refer to page 12 for details
Options3 hour emergency facility(Not Available with FX or FXW)
-EMI
Controls accessories*S-linc 24 hour timer -SL-24-T
S-linc keypad -SL-KP
S-linc additional I.R remote -SL-REM
S-linc plus touch screen -SLP-TS
S-Linc plus additional R.F remote -SLP-RF
S-Linc plus wall switch -SLP-WS
S-Linc plus control panel -SLP-CP
*Refer to page 14 for details
Recessed
Suspended/Surface
11
97
12
45
Suspension Centres
Suspension Centres
Su
spe
nsio
n C
en
tres
Su
spe
nsio
n C
en
tres
1094
1230
10
94
12
30
200
200
1197
1245
cd/klm - CO-CO180 - C90-C270 η=55%
Sky 8 x 28W
100
150
200
300
0° 15° 30°
45°
60°
75°
90°
105°105°
90°
75°
60°
45°
30° 15° 0°
002003
The Sky2
Sky2 is a large area modular light fitting, combining an attractive and
ergonomic design with easy installation and maintenance.
Large area light fittings have become popular with architects and
designers for their crisp clean looks and low glare ambient light.
However, the size required is often larger than possible with rigid
sheet materials so stretched fabrics or membranes are employed.
The luminaire interior is designed to minimise lamp visibility, whilst the
high light transmitting membrane (>70%) is stretched across a hinged
opening frame to allow easy access to the lamps.
Sky2 is ideal for any space where a high light level is required with low
glare. Applications have been wide – offices, training rooms, meeting
rooms, video-conferencing, call centres, public space, control rooms,
clinical treatment areas, shops and even a chapel.
8 x 54W
Lux 40m2 60m2 80m2 100m2 200m2 300m2
300 2 2 2 3 5 6
400 2 2 3 3 6 8
500 2 3 4 4 7 10
8 x 28W
Lux 40m2 60m2 80m2 100m2 200m2 300m2
300 2 3 4 4 7 10
400 3 4 5 6 10 14
500 3 5 6 7 12 17
Fast calculation table - Luminaire quantitiesReflectances: 70/50/20 Maintenance factor: 0.80 Ceiling height: 2.70m
The below figures are approximate, suitable as a rough guide for budget costing. For specific project designs and calculations please contact our design department [email protected]
Key benefits of the Skyπ range• High efficiency
• High wall illuminance (LG7)
• Wide light distribution
• Integral controls (optional at extra cost)
• White (RAL 9010) as standard
Order codes Code
Skyπ SKY3-
BodySuspended -SUS
Surface -SFC
Light source Lumens2 x 24W + 4 x 39W + 4 x 54W -244 33700
Dimming & controlsDSI -DSI
1-10V analogue -110
DALI -DALI
Switchdim -SD
S-Linc (Master)* -SLM
S-Linc (Slave)* -SLS
*Refer to page 12 for details
Options3 hour emergency facility -EMI
Controls & accessories*S-linc 24 hour timer -SL-24-T
S-linc keypad -SL-KP
S-linc additional I.R remote -SL-REM
S-linc plus touch screen -SLP-TS
S-Linc plus additional R.F remote -SLP-RF
S-Linc plus wall switch -SLP-WS
S-Linc plus control panel -SLP-CP
*Refer to page 14 for details
cd/klm - CO-CO180 - C90-C270 η=55%
Skyπ 2 x 24W | 4 x 39W | 4 x 54W
100
150
200
300
0° 15° 30°
45°
60°
75°
90°
105°105°
90°
75°
60°
45°
30° 15° 0°
Suspended/Surface
2001110
1250
004005
The Skyπ
The round Skyπ Is a recent development of the Sky2 requiring a new
approach for the diffuser membrane. The square Sky2 has a framed
door, which is one of the major features of the product. The ability to
relamp has been one of the main problems with larger membrane
luminaires, specialist labour was often required on site to release the
membrane during maintenance or relamping.
With the Skyπ the membrane is installed on a frame that is invisibly
retained via a spring mechanism. This allows simple access to the
luminaire without compromising its look with visible fixings.
Because the appearance of this type of product is key, it is necessary
to use different length lamps. There are 10 lamps (2x24W, 4x54W and
4x39W) used in the luminaire to keep the luminous appearance of the
membrane uniform.
The Sky2
The Sky2 is sometimes used in large spaces or to define feature
areas, where its colour change facility can create dramatic effect
and mood shift. In some circumstances this form of luminaire is
used to create very high light levels at much lower glare than using
conventional luminaires.
006007
Nesting
Nesting is another feature of the Sky2 that can be used to create
high quality workspace, where either dynamic colour change
(Circada) can replicate daylight, or where high levels of light are
desired. In this situation, surface mounted versions are joined
and fixed within a plasterboard ceiling.
008009
Options
DimmableDimming is available as an option on any Sky2 unit with the standard protocols available – switch dimming, 1-10V analogue, DSI digital and DALI digital. We are able to provide bespoke wiring configurations to optimise the energy efficiency or scene capacity using different hues of white light (see FX Circada below). The dimming controls themselves are supplied as a separate item to the fittings and are not included unless specifically requested.
FX Circada This is a specific form of dimming control to mimic the shift in daylight colour across the day. There is research suggesting that, especially in high northern latitudes, there are well-being benefits to be gained in the workplace from the effects of dynamic or biological lighting that will assist in entraining our circadian rhythms. The Circada version has 8 lamps of two different white colours, from cool to warm, which create a changing colour and intensity across the day. Separate time controls can be supplied that can be programmed to create an artificial day that is particular to a location and orientation.
FX (RGB) The FX is a 12 lamp version with four red, green and blue lamps, which can combine to create a wide variety of colours. In theory, and with suitable DALI control, most colours are possible including white. However RGB is less effective at white than primary colours and is therefore best used where strong colour applications are the main requirement. The level of output is much higher than with LED colour change, with more capacity to saturate a space with colour.
FXW (RGBW) The FXW is a development on from the FX (RGB), for applications where white is the main colour requirement. The fitting has 10 lamps, with 4 in white and 2 each of red, green and blue. The FXW allows white to be the predominant colour at low energy levels and for more subtle tinted colours than it is easy to produce with the FX. However, the FXW has less colour power than the FX and so is more suited to pastel colours and tints than for fully saturated colour changing.
Mounting
SuspendedThe suspended version is the same as the surface with the addition of a wire suspension kit. In past projects the Sky2 has been mounted up to 5m below a soffit and cross suspended to brace against wind induced movement. The Sky2 can have up to 12 lamps and in some circumstances this allows for a high light output sufficient to compare with metal halide, but with much less glare. The Sky2 has been used high in call centres, retail space and even some factory areas, where low glare and high power were the main factors.
RecessedThe dimensions of the recessed version are slightly smaller than that of the surface so that it will fit into an exposed T-grid ceiling as well as plasterboard. In other respects the products are very similar. It should be remembered that if this fitting is to be lifted and tilted into position within the ceiling there will need to be sufficient unobstructed void depth (around 500mm) to perform this operation. The recessed version is suited to arrays of fittings, which are particularly effective in suitably supported grid ceilings.
SurfaceThe surface product is manufactured from a steel body; polyester powder coated in white (RAL 9010) together with the stretched membrane within a door made from steel and aluminium. The surface lumianire is usually fixed through the back of the body into the soffit or an appropriate surface.
010011
FX circada
Whilst all Sky2 models can be supplied with either DSI, Analogue 1-10V, DALI or switch dimming electronics, to be compatible with most proprietary control systems, they can also be supplied pre-packaged with one of two dedicated controls systems built-in. Both Clearvision’s control systems are supplied with high frequency electronic control gear featuring intelligent electrode preheat-ing. This enables rapid dynamic operations to be performed without adversely affecting lamp life.
3000lx Relaxation 4000lx Warm
012013
Recessed Circada dynamic daylight simulation with S-linc control6000lx Cool 8000lx Concentration
S-LINCBased on the Osram DALI EASY II ® system, the S-linc control system provides simple user control via an infrared remote handset and/or wall mounted key pad. Additionally a 24 hour timer switch is installed for Circada systems. Unlike a conventional DALI system, no addressing is required, the system is simply plugged together and colour scenes/sequences programmed.
Between 1 and 127 ‘Slave’ luminaires are connected to a ‘Master luminaire, containing the control hardware. The Master luminaire can be located anywhere within the installation, ideally near a control point, and is supplied pre-programmed with up to 16 colour scenes and 4 colour changing sequences.
The Master luminaire may also be connected to a single retractive switch (eg. MK K4900), providing additional override on/off and up/down dimming control of the whole system. Simple programming changes can be carried out at a later stage via the keypad or infrared remote (user lockout prevents accidental reconfiguration) if required. Further alterations are performed via a laptop/desktop PC connected to the systems USB input.
• Controls Housed within a ‘Master’ Luminaire•16 Colour Scenes, 4 Colour Sequences• Infrared Handset and Keypad control• 24 Hour Timer (Circada only)• No Commissioning Required• Up to 128 Sky2 Luminaires Controllable* *(dependent on model)
S-LINC PLUSThe S-linc plus uses a conventional DALI control protocol and a more advanced 5.7 inch colour touch screen user interface, allowing between 1 and 32* Sky2 luminaires to be controlled by one touch panel. The panel incorporates concealed LED backlighting with an RGB colour mixing facility.
A total of 16 colour scenes and 99 colour changing sequences are available for selection or time control via an onboard real-time clock/calendar.
Manual dimming and switching control is also possible. Additional wall switches, touch pads and radio control handsets may also be connected to the system to provide further, basic, control points if required. The S-linc is supplied in a default state requiring the system to be commissioned and luminaires addressed on-site prior to operation.
*Dependent on Sky2 model
• 16 Colour Scenes, 99 Colour Sequences• 5.7” Colour Touch Screen• Real-time Clock/Calendar• Requires Commissioning• Up to 32 Sky2 Luminaires Controllable* *(dependent on model)
Controls
For More information on controls please email [email protected]
014015
LUMINAIRE(Slave)
*For Circada version only
KEYPADMASTER
OVERRIDE SWITCH
LUMINAIRE(Master) LAPTOPI.R
REMOTE
STANDARD
OPTIONAL
STANDARD
OPTIONAL
TIMER*
LUMINAIRE SWITCHLUMINAIRE TOUCH SCREEN
TOUCH PAD
R.FREMOTE
S-LINC
S-LINC PLUS
Emergency
EmergencyEmergency versions of Clearvision luminaires come in several forms. The standard configuration is for a 3 hour maintained operation. Both Nickel Cadmium (NiCad) and Nickel Metal Hydrite (NiMH) batteries are supplied depending on lamp compatibility. Some fixed output formats are available with combined inverter/ballasts, but dimmable emergency products are always supplied with separate ballasts and inverters.
Both self-testing inverters and intelligent emergency systems should be supplied in consultation with our technical department. Central test inverters are available where remote diagnostics and reporting systems require.
DimmingSky products are available with four main dimming protocols. Switch dimming is the most cost-effective dimming option for manual dimming of single rooms. DSI digital (Tridonic) offers digital functions for more advanced requirements. Analogue (1-10V) dimming is supplied to offer compatibility with many of the popular control systems. The DALI protocol is provided for high functionality systems, where reporting, flexibility (soft wiring) and individual addressing are project requirements.
If you have specific requirements for dimming and/or emergency luminaires, please check with our technical department to ensure they will be available with your chosen lamp format.
Lamp data
Lamp dataCode
Power Lamp holder Colour temperature OutputILCOS LBS
Linear Fluorescent T5 FDH T16 24W G5 865 1650 lm
Linear Fluorescent T5 FDH T16 39W G5 865 2950 lm
Linear Fluorescent T5 FDH T16 28W G5 865 2400 lm
Linear Fluorescent T5 FDH T16 28W G5 827 2600 lm
Linear Fluorescent T5 FDH T16 54W G5 865 4250 lm
Linear Fluorescent T5 FDH T16 54W G5 827 4450 lm
Linear Fluorescent T5 FDH T16 28W G5 RED 1800 lm
Linear Fluorescent T5 FDH T16 28W G5 GREEN 3350 lm
Linear Fluorescent T5 FDH T16 28W G5 BLUE 625 lm
Linear Fluorescent T5 FDH T16 54W G5 RED 3450 lm
Linear Fluorescent T5 FDH T16 54W G5 GREEN 6900 lm
Linear Fluorescent T5 FDH T16 54W G5 BLUE 1500 lm
Luminaire data System powerNumber of lamps
Total flux*865 827 Red Green Blue
SKYπ (Standard) 440W 8 - - - - 30900
SKY-828 (Standard) 248W 8 - - - - 19200
SKY-854 (Standard) 472W 8 - - - - 34000
SKY-FXC-828 (Circada) 248W 4 4 - - - 20000
SKY-FXC-854 (Circada) 472W 4 4 - - - 34800
SKY-FX-1228 (RGB) 372W - - 4 4 4 23100
SKY-RGBW-1054 (RGBW) 1180W 4 - 2 2 2 40700
016017
*Maximum/undimmed
CI/SfB (63) X
A Clearvision Dialux Plug-in is available for download from www.clearvisionlighting.com
This document is printed on chlorine free, environmentally friendly paper that is manufactured from pulp supplied by sustainably managed forests.
Clearvision is an ergonomic lighting company that designs and manufactures energy efficient lighting. Our products are developed with the environment in mind whilst also leading in performance and appearance. Our design and technical teams are on hand to support our customers throughout the lifetime of our products.
Clearvision Lighting Limited
2 Elliott Park, Eastern Road
Aldershot, Hampshire GU12 4TF, UK
TEL : +44 (0) 1252 344011
FAX : +44 (0) 1252 344066
EMAIL : [email protected]
WEB : www.clearvisionlighting.com