Embedded Software Lab. @ SKKU 17 1 Embedded Software Lab. Tizen v2.3 Input Service Framework.
SKKU Lab - Meeting
-
Upload
elvis-yates -
Category
Documents
-
view
27 -
download
0
description
Transcript of SKKU Lab - Meeting
1
SKKULab - MeetingSKKU LAB-MEETING, 05.FEB.2014
DONG-HYUN KIM ON BEHALF OF THE CERN-904 TEAM
DEPARTMENT OF PHYSICS, SUNGKYUNKWAN UNIVERSITY, KOREA
31. Status of 904 site
Last week, we did below…
1) Dark current test - 3 TN, 3 TW, 3 BO
2) Built a 3 RE4/2 Chamber
3) 2 Chamber – replaced TN & TW & BO gap
4) For complete Chambers, check a ground & screw & cover
64. Status of Data-Analysis
For TagAndProbe…
- Copy from Github for the MuonAnalysis/TagAndProbe
- Tag version : 08_05_01 ( Latest Version )
Upgrade Configuration file with ZMuMu.py
- Modify from old configuration file
- Changed Process.load of Configuration.StandardSequences
- For muons, add Tag & Probe mode / New TurnP variables
- For Tracking, add Tag & Probe mode
- For FakeRate, add JetPlusProbe & WPlusProbe & ZPlusProbe
74. Status of Data-Analysis
After crab job running, we’ve got the Error massage.
<FrameworkError ExitStatus="8009" Type="Fatal Exception">
An exception of category 'Configuration' occurred while
[0] Constructing the EventProcessor
[1] Constructing module: class=CandView ShallowCloneCombiner label='tpPairs'
Exception Message:
Cut parser error:Syntax error. (char 12)This Week mission