1

SKIN TONE CHART Warning: TRIALMAⅡ is not for people who have black and dark color

skin. Use this chart and the information on pages 4 to see if TRIALMAⅡ

is right for you.

Select the color below that best marches the colour of the skin on the back

of your hand.

Read the full Instructions for Use booklet for additional information and

warnings.

Note: This page should be appear in full color, or this is not the original

instruction booklet. Please call Customer Service if you need a

replacement.

2

TOPIC PAGE

Skin Tone Chart..................................................................................... 1

Device Description…………………...………………………….…….3

Read This First……………………………………………………….. 4

Performance Specifications……………………………………….…..4

Uses for TRIALMAⅡ……………………………………………… ..5

Is TRIALMAⅡ Right for My Skin and Hair Color?.............................6

Warning & Safety Information………………………………….……. 7

Benefits & Risks………………………………………….…………...12

About Hair Growth and Laser Hair Removal………………………...18

Using TRIALMAⅡ…………………………………………………..19

How to Get the Best Result…………………………………………...25

Cleaning TRIALMAⅡ……………………………………………….26

Troubleshooting………………………………………………………27

Warranty & Customer Service Information…………………………..30

3

Device Description

The TRIALMAⅡ system consists of a laser handpiece and an adapter.

4

Read This First

BECAUSE TRIALMAⅡ IS NOT FOR EVERYONE AND MAY NOT

BE RIGHT FOR YOU, READ ALL INSTRUCTIONS BEFORE

USING THIS DEVICE.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Please read all warning and safety information before using TRIALMAⅡ.

Always follow basic safety precautions when using any electrical product.

Performance Specifications Laser type: Diode laser

Output wavelength: 808nm

Output fluence: 8-24J/cm2

Output pulse duration: 125-600ms

Spot size: 1.0cm(diameter)

Pulse repetition rate: up to 0.5 Hz

Weight: 435 g

Room environment: <27 deg C

Total shots: >5,000,000

TRIALMAⅡ is designed to work within specifications for several years.

5

Uses for TRIALMAⅡ

TRIALMAⅡ is a laser system for use by individuals with lighter skin tones.

(See Skin Tone Chart on inside front cover). TRIALMAⅡworks on skin

areas with naturally brown or black hair. Areas where TRIALMAⅡcan be

used include underarms, bikini lines, arms, legs, and women’s upper lips.

Both women and men can use TRIALMAⅡ.

TRIALMAⅡ removes hair by emitting a pulse of light that is absorbed by

pigment in the hair shaft beneath the skin surface. This disables the hair

follicle and temporarily delays hair growth.

TRIALMAⅡ is not for everyone. TRIALMAⅡ is safe only for people

with lighter skin tones and is effective only on naturally brown or black hair.

Additionally, individuals with certain skin conditions and those using

certain medications should not use TRIALMAⅡ. Use the following table

and read “Who Should not Use TRIALMAⅡ ( Contrainindications ) to see

if TRIALMAⅡ is right for you.

6

Is TRIALMAⅡ Right for My Skin and Hair

Color?

Skin Color

(Use Skin Tone Chart on inside front cover)

White Ivory Beige Light

Brown

Medium

Brown

Dark

Brown

/Black

Natural

color of

the

hair

Blond No No No No No No

White No No No No No No

Grey No No No No No No

Red No No No No No No

Light

Brown

Yes Yes Yes Caution No No

Dark

Brown

Yes Yes Yes Caution No No

Black Yes Yes Yes Caution No No

7

Warnings & Safety Information

Failure to follow these warnings could cause burns, blisters, skin changes,

or other serious problems

DO NOT use TRIALMAⅡon darker skin tones (medium brown, dark

brown, or black skin). Darker skin tones absorb too much laser light. Using

TRIALMAⅡon medium brown dark brown, or blisters, scars, and skin

changes. See skin tone chart on inside-front cover to determine your skin

tone.

DO NOT use TRIALMAⅡ if you are of African, east Indian, native

American, or pacific island descent. These skin types absorb too much laser

light, which can cause serious skin injury.

DO NOT use TRIALMAⅡ if you rarely or never sunburn after

prolonged sun exposure. These skin types absorb too much laser

light ,which can cause serious skin injury.

DO NOT use on skin areas with eczema ,psoriasis ,lesions , open

wounds or active infections ,such as a cold sore ,wait for the affected are to

heal before you begin using TRIALMAⅡ.

DO NOT use TRIALMAⅡon children or allow children to use this

device

8

TRIALMAⅡ DOES NOT WORK on naturally white, gray, blond

and red facial or body hair, these hair colors are too light for TRIALMAⅡ

to be effective.

DO NOT use TRIALMAⅡ on dark brown or black spots on your

skin such as large dark skin areas absorb too muck laser light, which can

injure your skin.

DO NOT use TRIALMAⅡ on or around tattoos .areas with tattoos

may absorb too much laser light and cause burns or blisters.

DO NOT use TRIALMAⅡ inside the ears ,nose mouth, or on nipples,

areolas (the colored area around the nipple), penis, scrotum (male genitals）

labia majora, labia minora (female genitals)or anus , these areas are darker

than your natural skin color. Using TRIALMAⅡ in these areas can result in

burns ,blisters,scars,and skin changes(such as changes in skin color or skin

infection).

To avoid possible serious eye injury, DO NOT use TRIALMAⅡ on

or near the eyes. DO NOT use on eyebrows, eyelashes, eyeballs, or eyelids.

DO NOT use within the bony orbit of the eye. DO NOT use on your

forehead, temples, cheek bones, above the nostrils or between the eyes or

eyebrows.

9

TO avoid possible serious eye injury, DO NOT point TRIALMAⅡ at

your eyes or the eyes of others.

DO NOT use near the mouth or use on the upper lip if you have metal,

silver or gold capped teeth or metal, silver or gold fillings.

If you experience more than moderate pain during use, immediately

stop using TRIALMAⅡ. More than moderate pain during use may

mean that TRIALMAⅡ is not safe for your skin.

DO NOT use on any body site where you might later want hair,

TRIALMAⅡ may cause permanent hair reduction.

DO NOT use TRIALMAⅡ for any purpose other than hair removal.

DO NOT use TRIALMAⅡ on skin that is sunburned or tanned.

Tanned skin can absorb too much laser light, which can cause injury to the

skin. Wait until the tan or sunburn fades before using the device.

DO NOT expose skin areas where TRIALMAⅡ was used to the sun

for at least one week after hair removal. Sunscreen is recommended for any

treated areas exposed to the sun for at least one week.

10

DO NOT wax or pluck hair for 6 weeks prior to use. If you have

recently waxed or plucked your hairs, TRIALMAⅡ will not work, because

the hair below the skin surface has been removed.

DO NOT use TRIALMAⅡ on your face for at least 6 to 8 weeks

following a facial peel or other skin resurfacing procedure. It can take 6 to

8 weeks for the skin to heal completely after these types of procedures. Any

trauma to the skin during the recovery period can cause discoloration and

/or scarring. Check with your physician before using this device if you have

recently received a facial peel or other skin resurfacing procedure.

DO NOT use TRIALMAⅡ on areas of skin that you are currently

treating or have recently treated with Alpha-hydroxy acids(AHAS),

beta-Hydroxy Acids (BHAS), Retin-A, topical retinoids or azelaic acid.

Many common wrinkle-reducing creams and lotions contain re-tin A and

AHAs. DO NOT use TRIALMAⅡ on any part of your body if you have

taken Accutane within last six months. These treatments can make skin

more susceptible to tears, wounds, and irritation.

DO NOT use TRIALMAⅡ if you have a history of keloidal scar

formation, a known sensitivity to light(photosensitivity), or are taking

medications that make the skin more sensitive to light .these medications

include non-steroidal anti-inflammatory agents, ( e.g., aspirins, ibuprofens,

11

acetaminophen ), tetracy-clines, phenothiazine, thiazide diuretics, DTIC,

fluorouracil, vinblastine, griseofulvin, alpha-hydroxy acids(AHAS),

Beta-Hydroxy Acids (BHAS), Retin-A, Accutane and/or topical retinoids.

DO NOT attempt to open or repair TRIALMAⅡ. Opening

TRIALMAⅡ may expose you to dangerous levels of laser light, which can

cause serious and permanent eye injury. An authorized repair center must

perform all repairs. Contact Customer Service to arrange for repair of a

broken or damaged device.

WARNING: DO NOT use this appliance near bath-tubs, showers,

basins or other vessels containing water.

Water can cause permanent damage to the device and adapter, and

cause an electrical shock, if TRIALMAⅡ becomes damp or wet, do not use

TRIALMAⅡ, contact customer service.

DO NOT use TRIALMAⅡ while bathing. DO NOT place or store

TRIALMAⅡ or the battery charger next to a tub or sink. A wet device or

adapter can cause electrocution or shock.

DO NOT operate TRIALMAⅡ with a damaged plug or cord. Keep

the power cord away from heated surfaces. Using a damaged device can

cause electrocution, burns, or fire.

12

DO NOT use TRIALMAⅡ if you drop the device and it appears

damaged. Using a damaged device can cause skin injury, eye in-jury,

electrocution, burns or fire, contact customer service if your device appears

damaged

DO NOT use TRIALMAⅡ if the tip (which includes the metal bezel

around the output window) overheats. Using a damaged device can cause

skin injury, eye injury, electrocution, burns or fire. Contact Customer

Service if your device appears damaged.

DO NOT use TRIALMAⅡ on children or allow children to use this

device.

DO NOT plug the adapter into a power outlet with the wrong voltage.

TRIALMAⅡ input voltage is 100V-240V.

Benefits ＆ Risks

This section describes the benefits and risks of TRIALMAⅡ. Some people

should not use TRIALMAⅡ. For these people, the risks of using

TRIALMAⅡ do not outweigh the benefits.

The benefits and risks of TRIALMAⅡ are related to the way that

TRIALMAⅡ works. TRIALMAⅡ removes hair by pigment in the hair

13

shaft beneath the skin surface. If the hair has enough pigment, this

absorption heats the hair follicle and disables the hair follicle.

Within one to two weeks after using TRIALMAⅡ, the hair typically begins

to fall out (be 'ejected ' from the skin) . Hair regrowth may then be delayed

for several weeks or more following use. The hair that regrows may be

lighter and finer. Most of the risk in using TRIALMAⅡ is the risk of skin

injury due to heating of the skin , however other less common side effects

such as changes in skin color and skin infection can also occur.

The specific benefits and risks listed below are based upon a safety and

efficacy study of TRIALMAⅡ. In this study, users performed three laser

hair removal sessions that were spaced three weeks apart . The number of

hairs at each body area were counted before each session and at one months

after the last session.

Benefits

For appropriate users (people with lighter skin tones and brown or black

hair in the skin area where TRIALMAⅡ was used), TRIALMAⅡ has the

following possible benefits:

A reduction in the number of hairs after one use. In the safety and

efficacy study , three weeks after the first use, there was an average of 61%

14

fewer hairs.

Consistent hair reduction with repeated use. In the safety and

efficacy study, three weeks after the second laser hair removal session,

there was an average of 70% fewer hairs.

Hair reduction that lasts for one to two months. In the safety and

efficacy study, one month after the last laser hair removal session, there was

an average of 60% fewer hairs.

Hair that regrows is finer and lighter. In the safety and efficacy

study , 69 of 79 users(87%） reported finer hair one month after the last

laser hair removal session. 55 of 79 users(70%) reported lighter hair one

month after the last laser hair removal session.

Results will vary by user and by body site(s）where TRIALMAⅡ

is used. In the safety and efficacy study, some users had little to no hair

removal while other users had nearly complete hair removal. Some

variation is due to how well users followed the instructions in using

TRIALMAⅡ.

Proper use of TRIALMAⅡ is important in getting good results. Please see

following information on how to get the best results.

15

Risks

If you use TRIALMAⅡ on or near the eyes, you may cause serious

eye injury. DO NOT use TRIALMAⅡ on eyebrows, eyelashes, eyeballs,

or eyelids. DO NOT use within the bony orbit of the eye. DO NOT use on

your forehead, temples, cheek bones, above the nostrils or between the eyes

or eyebrows.

You may feel burning, tingling, itching, or pain in the skin area while

using TRIALMAⅡ.

* Mild to moderate pain or discomfort is normal during use. In the

safety and efficacy study，almost all users(96%) with lighter skin

tones(people who can safely use TRIALMAⅡ) reported mild to moderate

pain the first time they used TRIALMAⅡ. After the first use, the pain level

reported by users decreased.

* Severe or unbearable pain is NOT normal. If you experience anything

more than moderate pain, immediately stop using TRIALMAⅡ.

Unbearable or severe pain while using TRIALMAⅡ may mean that you

may be causing serious damage to you skin.

You skin may become red right after using TRIALMAⅡ or within 24

hours of using TRIALMAⅡ. Redness generally clears up within 24 hours.

About 1 out of 3 users(33%) in the safety and efficacy study experienced

16

some skin redness after use. See your doctor if the skin redness does not go

away within 2 to 3 days.

You may have some permanent hair reduction in the skin area. Hair

removed with TRIALMAⅡ may not grow back.

You may have skin swelling, especially around the hair follicle. No

users (0 out of 88) in the safety and efficacy study experienced skin

swelling. However, other hair removal lasers are known to cause skin

swelling. If your skin swells around the hair follicle or in the area where

TRIALMAⅡ was used, it should go away within 24 hours. Stop using

TRIALMAⅡ and see your doctor if the skin swelling is not gone within 2

to 3 days.

You may have temporary or permanent changes in skin pigmentation

(color of your skin).

* In the safety and efficacy study, no users(0 out of 88) with lighter skin

tones(people who can safely use TRIALMAⅡ) had changes in skin

pigmentation However, other hair removal lasers have been known to cause

changes to skin pigmentation. If you develop changes in your skin

pigmentation, stop using TRIALMAⅡ and see your doctor.

* The risk of changes in skin pigmentation is higher for people with darker

17

skin tones. In the safety and efficacy study, some users who had a skin tone

darker than recommended for TRIALMAⅡ (people who should NOT use

TRIALMAⅡ) had changes to skin pigmentation after a light pulse on the

HIGH setting.

You may develop skin burns, blisters or scarring.

* In the safety and efficacy study, no users (o out of 88) with lighter skin

tones (people who can safely use TRIALMAⅡ) had skin burns or blisters.

However,other hair removal lasers have been known to cause skin burns or

blister. If you develop a burn or blister, stop using TRIALMAⅡ and see

your doctor promptly.

* The risk of skin burns or blisters is higher for people with darker skin

tones. In the safety and efficacy study, 11 of 44 users(25%) who had a skin

tone darker than recommended for TRIALMAⅡ (people who should NOT

use TRIALMAⅡ) developed a burn or a blister after a light pulse on the

HIGH setting.

If you develop burns or blisters, you might develop a skin infection,

which can cause serious injury.

* In the safety and efficacy study, no users (0 out of 88) with lighter skin

tones(people who can safely use TRIALMAⅡ) experienced skin infections.

However, there have been reports of infection with other laser products so

infection is a potential risk. Therefore, you should not use TRIALMAⅡ if

18

you have an active skin disease, sunburn, peeling skin, open sores, a skin

rash, active lesions from psoriasis or other skin diseases, a prior history of

skin cancer, or are taking medications that may cause your skin to be

sensitive to light.

About Hair Growth and Laser Hair Removal

Hair growth is a continuous cycle that occurs in three phases and varies

among individuals and specific areas of the body. Results will depend on

your skin type and color, hair type and color, and what initially caused the

hair to grow. Laser hair removal is most effective when done on hairs that

are in the anagen or active growth stage. During this stage, the hair contains

an abundance of pigment(melanin) which absorbs the light pulse and

disrupts the hair growth cycle.

Because your hair grows in different phases, repeat hair removal sessions

are necessary. Usually once every 2 to 4 weeks to achieve best results. Each

laser hair removal session may result in less hair regrowth. The hair that

does return becomes progressively lighter and finer with each use.

Although it may appear that the hair is still growing after each laser hair

removal session ,the hair inside each disabled follicle is slowly being

"ejected" from the skin. It generally takes 2-3 weeks for these hairs to be

19

ejected from the skin. Additionally, hairs that were not in the anagen or

"active" growth phase during the previous laser hair removal session will

continue to grow and will need to be covered again during the next session.

For best results, the use of TRIALMAⅡ on the same skin areas should be

performed several weeks apart.

USING TRIALMAⅡ

When Connect TRIALMAⅡ with adapter, there will be a notice

invoice and indicator light. It means TRIALMAⅡ are ready to work.

Adapter need 100V-240V 50-60HZ input.

Power Settings and Indicator Lights

SETTING OFF GRADE 1 GRADE 2 GRADE 3 GRADE 4 GRADE 5

LIGHTS NONE 1

Bottom

2

Middle

&Bottom

3

All

2

Top

&Middle

1

Top

BEEPS NONE 1 2 3 4 5

20

Using TRIALMAⅡ

Note: Perform a skin patch test 24 hours before using TRIALMAⅡ. To

perform a skin patch test, fire 1-2 shots in the grade5 setting on a part of the

body you plan to treat. (See Steps 1-9 below for instructions on how to use

TRIALMAⅡ.)

DO NOT use TRIALMAⅡ If after 24 hours, you notice blistering,

burns, scarring, skin pigment changes or any other adverse effects or if you

are unsure of the outcome of the skin patch test. Consult a physician before

using this device.

If the skin appears normal 24 hours after the skin patch test, proceed with

the following:

Shave the entire skin area before using TRIALMAⅡ. Shaving reduces

the pain during use and the chance of injuring your skin by removing the

surface hair.

Remove all cosmetics, lotions, and creams, and clean the skin area

before use.

Wipe your skin with a cool, damp cloth.

If desired, press the POWER button to adjust the power setting. Each

21

time the button is pressed, the next setting will light up. TRIALMAⅡ will

beep once for the grade1 setting, twice for the grade2 setting, three times

for grade3 setting, four times for grade4 setting, and five times for grade5

setting.

If using TRIALMAⅡ for the first time, you should start with the LOW

setting and increase to the MEDIUM or HIGH settings based on your

comfort level. For the best results, use the highest setting that is

comfortable for you.

Note: It is normal for the fan to turn on and off while you are using

TRIALMAⅡ.

DO NOT use TRIALMAⅡ on darker skin tones (medium brown,

dark brown, or black skin). Darker skin tones absorb too much laser light.

Using TRIALMAⅡ on medium brown, dark brown , or black skin can

result in burns, blisters, scars, and skin color changes. This includes

individuals who have recently tanned or used a self tanner on their skin. See

Skin Tone Chart on inside front cover to determine your skin tone.

DO NOT use TRIALMAⅡ if you have an active skin disease,

sunburn, peeling skin, open sores, a skin rash, active lesions from psoriasis

or other skin diseases, a prior history of skin cancer, or are taking

22

medications that may cause your skin to be sensitive to light.

To avoid possible serious eye injury, DO NOT use TRIALMAⅡ on

eyebrows, eyelashes, eyeballs, or eyelids. DO NOT use within the bony

orbit of the eye. DO NOT use on your forehead, temples, cheek bones,

above the nostrils or between the eyes or eyebrows.

Place TRIALMAⅡ’s output window contacts the skin closely, So that

the contact sensor can work well. TRIALMAⅡwill beep twice in gentle

rhythm if contact sensor work well.

Note: It is not necessary to push the power button while you are using

TRIALMAⅡ as this will increase the power setting or turn the device off.

TRIALMAⅡ will beep once (start beep) to tell you that skin contact is

made . The light pulse will start. Continue to hold TRIALMAⅡ in place.

23

TRIALMAⅡ will beep a second time (end beep) in a lower tone

when the light pulse completes. There may be a delay of up to a few

seconds between the start beep and the end beep before lifting the output

window. If you hear a buzzing tone instead of a second beep, you lifted the

output window off the skin before the light pulse completed. If this happens,

go over the area again.

After you hear the end beep, lift and

move the output window slightly (about

6mm). This will overlap the previous skin

area by about one-half of the output

window. Overlapping makes sure that all

of the hairs are covered.

Most users will not notice any change in the skin area for 1 to 2 weeks after

using TRIALMAⅡ. After 1-2 weeks, the hair should begin to fall out (be

'ejected' from the skin). Hair regrowth may be delayed for several weeks or

more.

You may feel burning, tingling, itching, or mild pain in the skin area while

using TRIALMAⅡ. Mild to moderate pain or discomfort is normal during

use. If you experience too much pain or discomfort, reduce the power

24

setting as needed.

If you experience more than moderate pain during use,immediately

stop using TRIALMAⅡ.More than moderate pain during use may mean

that TRIALMAⅡ is not safe for your skin.

Continue going over an area of skin until you have completely covered

it. Each time you lift and reposition TRIALMAⅡ, another light pulse will

occur. You may wish to go over the area horizontally (side to side), then go

over it again vertically(up and down), to make sure the entire area is

covered.

Try to complete about 50 light pulses in each 3cm X 3cm square area.

A complete laser hair removal session may take a few minutes to an hour or

more, depending on the size of the area you are covering. TRIALMAⅡ

takes about 11/2 minutes to emit 50 light pulses.

10.When you have finishes using TRIALMAⅡ, press the POWER button

to turn off TRIALMAⅡ. And unplug the adapter.

Repeat laser hair removal sessions regularly on each body site where

you wish to reduce the number of hairs. In safety and efficacy studies,

TRIALMAⅡ was used on the same body site every 2 to 4 weeks (3 weeks

on average).There are no known problems with more frequent use of

TRIALMAⅡ. However, since it has not been studied, it is not

25

recommended to use TRIALMAⅡ on the same body site more than once

every 2 weeks.

How to Get the Best Results

You will obtain the best results by:

Waiting at least six weeks after waxing or plucking before using

TRIALMAⅡ.TRIALMAⅡ is not effective on areas that have been

recently plucked or waxed because the hair shaft has been removed from

the follicle.

Shaving just before using TRIALMAⅡ. Shaving reduces the pain

during use and the chance of injuring your skin by removing the surface

hair.

Using the highest power setting that is comfortable. Higher power

is more effective at removing the hair.

Go over any spot where you heard a buzzing tone rather than the

'end' beep. A buzzing tone indicates the light pulse was incomplete.

Overlapping each skin area by about 6mm (50%)to ensure all

hairs are covered. It helps to make sure that all of the hairs are covered. If

26

you are overlapping fully, you should complete about 50 light pulses in

each 3cm X 3cm square area.

Using TRIALMAⅡ regularly (every 2-4 weeks).

Most users will not notice any change in the skin area for 1 to 2 weeks

after using TRIALMAⅡ.Within 1 to 2 weeks after using

TRIALMAⅡ,the hair should begin to fall out (be 'ejected' from the

skin). Hair regrowth may then be delayed for several weeks or months

following use. Hairs that regrow in the skin area may be finer and lighter.

It is normal to feel some tingling, burning, or mild pain during use. If

you experience too much discomfort, use a lower setting. Remember

that shaving just before using TRIALMAⅡ also reduces pain.

Follow-up laser hair removal sessions may be less painful, because there

will be fewer hairs to cover.

Cleaning TRIALMAⅡ

To prevent debris build up on the output window and to lower the potential

risk of infection, TRIALMAⅡ must be cleaned prior to each use.

DO NOT use TRIALMAⅡnear bathtubs, showers, basins or other

vessels containing water.

27

DO NOT submerge TRIALMAⅡ.Water or other liquids can cause

permanent damage to the device. If TRIALMAⅡ become damp or wet, do

not use it. A wet device can cause electrocution or shock.

1. Unplug the adapter from TRIALMAⅡ and the power outlet. Make sure

you turn the power off. If needed, press the POWER button to turn off

the power.

2. Clean the output window, the TRIALMAⅡ handpiece by wiping with a

moist cloth. Moisten the cloth with water, alcohol or other mild

household cleaners.

3. Allow TRIALMAⅡ to dry completely. Then reconnect TRIALMAⅡ

and adapter.

Troubleshooting

Please use the following troubleshooting information to help solve any

problems. If you are still unable to solve your problem, please call

Customer Service.

All 3 indicator lights flash quickly at the same time after turning the

power on.

TRIALMAⅡ is not working properly. Call Customer Service.

28

Dirt or debris is stuck to the output window. I am not able to remove it by

cleaning.

Since the window is extremely hard, you may clean it vigorously. You can

usually scrape off any dirt or debris easily with a fingernail or piece of firm

plastic. If you are unable to remove the dirt or debris, contact Customer

Service for further instructions.

When I place the TRIALMAⅡ output window against my skin, nothing

happens. TRIALMAⅡ does not beep, even after several seconds

Check that TRIALMAⅡ is connect with adapter. And the indicator light in

adapter is light. For fleshy areas, you may need to press more firmly.

TRIALMAⅡ makes a long, buzzing tone, rather than the usual short

beep while I’m using it to my skin.

Be sure not to lift TRIALMAⅡ from the skin until you hear the end beep.

Touch skin closely with the output window.

TRIALMAⅡ device appears to be malfunctioning, broken or defective.

DO NOT use TRIALMAⅡ if the output window is cracked, chipped

29

or missing; if you see or smell smoke when the device is power on; if any

of the contact sensors are stuck or missing; if the fan is broken; the outer

shell is cracked or is coming apart; if the grill(fan vent) is cracked, coming

off or missing; if the tip(which includes the metal bezel around the output

window) overheats. Using a damaged device can cause skin injury, eye

injury, electrocution, burns, or fire. Contact Customer Service for further

instructions.

My skin tingles, burns, itches, or hurts while I am using TRIALMAⅡ.

You may feel some tingling, burning, itching, or mild pain when using this

device. Some discomfort is normal. Be sure to:

Shave the skin area before using TRIALMAⅡ. Shaving may reduce the

tingling, burning, or pain during use.

Press the POWER button to select a lower setting if necessary. Five

settings are available: Grade 1 to 5.

Note: If you use a lower setting, try a higher setting the next time you treat

the same area. The Grade5 setting produces the best hair removal.

Follow-up laser hair removal sessions done after the first session may hurt

less, because there will be fewer hairs left to cover.

If you experience more than moderate pain, you should stop using

TRIALMAⅡ.

30

Warranty & Customer Service Information

Warranty

Warranty is one year since purchase.

Customer Service Information

DO NOT attempt to open or repair TRIALMAⅡ. Opening

TRIALMAⅡ may expose you to dangerous levels of laser light, which

may cause serious and permanent eye injury. An authorized repair center

must perform all repairs. Contact Customer Service to arrange for repair of

a broken or damage device.

Trying to open TRIALMAⅡ may damage TRIALMAⅡ and will

void your warranty.

If you have any questions after reading this manual, call Customer Service.