SKID STEER LOADERS/COMPACT TRACK LOADERS · Case Skid Steer and Compact Track Loaders get tougher...

SKID STEER LOADERS/COMPACT TRACK LOADERSSR130 I SR160 I SR175 I SV185 I SR200 I SR250 I SV300TR270 I TR320 I TV380

2

Packaged power since 1969Since the first model 1530 Uni-Loader, Case has built its reputation around power, productivity and reliability. This has been achieved through the introduction of innovative features such as the exclusive Ride Control and side lighting.


3

Extended line-upTo deliver Case performance and productivity to an ever wider range of customers, Case Construction Equipment has expanded its skid steer and compact track loader line-up. The revised range includes five radial lift skid steers (SR models), two radial lift compact track loaders (TR models), two vertical lift skid steers (SV models) and one vertical lift compact track loader (TV model).

Big on power, big on comfortWhatever your job, Case has a skid steer or compact track loader that can handle it. Our new extended line-up of skid steer and compact track loaders delivers:• More power• Increased stability• Greater operator comfort and visibility• Best-in-class serviceability• Wide range of attachments

4

Case power stance delivers maximum stabilityOur Power Stance chassis rides on a 21 percent longer wheelbase, delivering greater stability and comfort and allowing increased lifting capabilities, regardless of jobsite conditions.

Best-in-class breakout forcesThe cylinder geometry optimises the skid steer and compact track loader’s push and pull power, while the bucket support baring directly on the chassis of the machine further adds to its pushing power. With these features, Case skid steer and compact track loaders deliver best-in-class bucket and lift breakout forces.

CHASSIS SUPPORTS PUSHING POWER!


5

25% wider cabIt’s not just the range that has expanded: all models benefit from a cab with up to 25% more internal width, providing greatly improved operator comfort. Our cab - the widest in the industry - provides plenty of room for comfortable operation, with greater headroom and legroom, more space between the control levers and easy access to the seat.

Leading operator comfort The wide door, repositioned grab handles and a lower threshold provide easy access to the cab. All models have suspension seats and optional air suspension heated seats for the ultimate in comfort. If specified with full cab glazing and door, the cab is completely sealed to reduce the amount of noise and dust.

6

360-degree visibilityThe 89 cm wide cab together with larger windows and a new ultra-narrow wire side-screen provide outstanding visibility all around the jobsite, allowing safer operation.

Increased productivity and safetyThe larger side windows offer visibility over the tyres and the forward cab design provide a clear line of sight to the cutting edge of the bucket improving both productivity and safety.


7

Controls at your fingertipsAll controls are within easy reach and you can choose between standard mechanical

drive levers and electro-hydraulic controls.

EH (Electro-Hydraulic) controls feature multiple speed and sensitivity settings that enable the operator to personalize the machine according to their preferences. The

selection is easily made on the instrument panel’s SETUP menu.

Optional Ride Control provides superior stability and operating speeds, regardless of jobsite conditions.

Optional Self Levelling system keeps the bucket parallel to the ground when the loader arm is raised reducing material spillage and making pallet handling easier.

Switchable Controls

With the electrohydraulic joysticks you can set the control pattern to

match your preferences, switching between ISO- and H-patterns just by

clicking one button.

Unique side lightsWorking longer days even in winter is easy

thanks to the unique Case side lighting system.

8

SR250 / SV300TR320 / TV380


Tier 4 solutions: more performance & less emissionsCase’s emphasis in product development has been on increasing productivity, improving fuel efficiency, increasing uptime through best-in-class serviceability and improving operator comfort. And Case has made all of these improvements in an environment-friendly way. Case has applied different technologies for each model:

TIER 4i / STAGE 3A

ISM 49 hp (Naturally aspirated)

TIER 4F / STAGE 3BISM 60 hp

(Turbo)

TIER 4F / STAGE 3BISM 60 hp & 67 hp

(Turbo/HPCR)

TIER 4i / STAGE 3AFTP 74 hp

(Turbo)

TIER 4i / STAGE 3BFTP 90 hp

(Turbo/HPCR)

SR130 SR160 SV185 / SR175 SR200 / TR270

INTERNAL CEGR

(No Regeneration needed)

DPF + DOC

(Regeneration needed)

DPF + DOC

(Regeneration needed)Electronic engine

DOC ONLY


Electronic engine

INTERNAL CEGR


• The electronic engine control enhances precision and responsiveness to operator commands.

• Cooled Exhaust Gas Recirculation (CEGR) process is now controlled electronically to achieve greater performance and fuel efficiency, as well as even greater reliability - for example, to help protect the engine from overheating

• SR175; SV185; SR250; SV300; TR320 and TV380 are equipped with High Pressure Common Rail (HPCR) technology, which regulates fuel pressure and injection timing ensuring extremely high injection precision in all engine operating conditions . This results in more torque output and allows to get more useful power from every drop of fuel.

• Diesel Oxidation Catalyst (DOC) utilizes a chemical process in order to break down pollutants from diesel engines in the exhaust stream, turning them into less harmful components. DOC does not require regeneration and it is a maintenance-free component.

• Diesel Particulate Filter (DPF) physically traps particulate matter from the engine exhaust. Electronic controls will trigger an automatic regeneration of the DPF system. Additionally, the system can notify the machine operator to manually regenerate the DPF system occasionally when the soot load in the DPF exceeds the range defined for automatic regeneration.

• CASE customers get the job done faster and get it done right!

Diesel particulate filter

9

Case Skid Steer and Compact Track Loaders get tougherThe new SR160 takes the lead in its category providing best-in-class peak torque (188 Nm), 19% more hydraulic flow and more horsepower than most competitors, while keeping compact dimensions. SR175 boasts a 21% higher peak torque rise at 1800 rpm compared to the previous model, and goes from 60 to 67 gross hp, a 12% increase. Both SR175 and SV185 meet Tier 4 Final (Stage 3B) without using a DPF, just a maintenance-free Diesel Oxidation Catalyst that reduces Particulate Matter emissions for the whole life of the machine. Flow rates for auxiliary hydraulics on the SR175 and SV185 have also been increased to allow operators to run attachments more productively.SR130 has a larger 2.2 liter engine with increased horsepowers and more torque. SR130 together with SR200 and TR270 remain Tier 4 Interim (Stage 3A) with a simple internal CEGR.The SR250, SV300 and the larger Compact Track Loaders (TR320 and TV380) are now Tier 4 Interim (Stage 3B) thanks to the Electronic Control Unit (ECU) that balances fuel, air and re-circulated gases injections into the combustion chamber optimising performance, fuel consumption and emissions.All the technological improvements accross the range allow our machines to work in the same spaces they did before, but perform like models of larger class size, in other words the new range gives customers more value.

SPECIFICATIONS SR150 NEW SR160

Engine capacity 2,0 liter 2,2 liter

Power 52 hp 60 hp

Torque 148 Nm 188 Nm

Emissions level T4i/Stage 3A T4 Final/Stage 3B

Hydraulic flow 59 l/min 70 l/min

+15%

+27%

+19%

10


11

Simple and robust undercarriageThe new Case compact track loaders feature a robust undercarriage, engineered to hold fast on steep slopes and take command of muddy or sandy terrain. The undercarriage has a rigid-track frame with fewer moving parts for greater durability and easier maintenance than suspension-track systems.

Heavy-duty drive motor/final driveIncreases component life byusing an oversized bearing in line with the drive sprocket and elevating the drive assembly, keeping it out of material.

Lifetime sealed and oil lubricated rollers and idlersDuo-cone face seals utilize proven dozer oil-lubrication technology that provides greater reliability and lower maintenance costs. The seals reduce the possibility of material and moisture getting into the rollers and idlers.

Triple flange rollersHelps prevent de-tracking on inclines by using dozer-style rollers with a larger inner-diameter flange positioned between the track lugs.

Simple hydraulic track adjustmentTrack tension is simply adjusted by adding or removing grease to a hydraulic cylinder. Track tension is important to undercarriage life and track life.

12


Convenient cab tiltingWith just two retaining bolts, the cab is easy to tilt, providing access to hydraulic and transmission components when necessary. A safety locking system that prevents the cab from dropping is automatically activated.

Best-in-class serviceabilityEasy access, daily service points grouped together and remote mounted filters mean it’s easy to keep Case skid steer and compact track loaders working to their maximum efficiency.

Smart battery and drain hoses accessBattery and environmental drain hoses are easily accessible from the side of the machine, by removing a tap located behind the rear wheel, allowing quick service and fast maintenance activities.

13

SiteWatch: Centralised Fleet Control Benefits At Your Fingertips

Measure your true asset availability and optimise it• Eliminate the “phantom fleet”: SiteWatch allows to identify spare units or

under loaded machines on each site.• Become able to reallocate units where they are more needed.• Forward Maintenance Planning is easier since the actualised working

hours are always available.• Extend the benefits of SiteWatch to the rest of your fleet: SiteWatch can be

installed on the units of other brands as well.

Challenge your Total Cost of Ownership!• Being able to compare the fuel usage of different machine types will allow

you choose the right equipment.• Save on transport costs with planned and grouped maintenance tasks.• Peace of mind, optimised uptime and lower repair costs:

with preventive maintenance you can for example be alerted if the engine needs to be serviced and avoid a disruptive breakdown.

• Be able to compare your asset Return On Investment on different sites.• Your equipment is used only during working hours. You can set up alerts

so that you know if it is in use during the weekend or at night.• Integrate with the programmed maintenance package, so that you can be

sure every machine is at the right place at the right time.

More Safety, Lower Insurance Premium• Keep thieves away: dissuade them from attacking your asset because it is

geo-localised. SiteWatch is hidden so that thieves can’t find it quickly.• Your fleet is used only where you decide. You can define a virtual fence

and receive an email when a machine exits that perimeter.

The Science BitThe Case SiteWatch telematics system uses a high-tech control unit mounted on each machine to collate information from that machine and from GPS satellites. This data is then sent wirelessly through the mobile communication networks to the Case Telematics Web Portal.

TELEMATICS

14

An attachment for every jobCase skid steer loaders can handle a broad range of attachments, providing outstanding versatility to serve a broad range of industries.

Connect Under Pressure (CUP)The CUP standard feature allows you to connect tool hoses without a wrench.

Handle attachments easily!Hydraulic Coupler Option: An optional hydraulic attachment coupler increases both operator comfort and uptime on the job site since attachments can be exchanged quickly and safely without leaving the cab.This option is now available for every model within range.


15

ASPHALT FLOATWHEEL COMPACTOR WHEEL EXCAVATOR

COMPACTION ROLLER CEMENT MIXER BACKHOE

PLANER BROOM BUCKET

16


AUGERPALLET FORK HAMMER

HIGH TIP BUCKET WIDE RANGE OF BUCKETS4X1 MULTIPURPOSE BUCKET

FORK & GRAPPLE BALE SPIKEFARM FORK

17

Attachment Application Width (mm)

Depht (mm)

Weight (kg)

Flow Compatible Model

Wheel Excavator Trenching jobs on hard, compact materials like asphalt and concrete, digging trenches on roads or in areas where movement is restricted.

Wheel width130130

150 - 450200 - 600

1.1551.260

HighHigh

SR200 and biggerSR175 / SV185 / SR200

Wheel Compactor Compacting the bed of a trench before adding an asphalt surface layer. Wheel width200 - 250 - 300 350

- 400

0 - 750 550 Std SR200 and bigger

Asphalt Float Backfilling of trenches and widening road surface while maintaining the road’s original gradient.

1900 N.A. 620 Std SR175 and bigger

Planer Planing on asphalt or concrete. Overlaying road, industrial and courtyard surfaces. Maintenance of stretches of road. Restoration of damaged, bumpy or worn surfaces.

350450600

1.000

0 - 1100 - 1500 - 1700 - 130

590790950

1.090

StdHighHighHigh

SR175 and biggerSR175 / SV185 / SR200SR200 and biggerSR200 and bigger

Broom Bucket Clearing yards, roads, footpaths, etc. Also efficient for snow clearance. 1.5251.6801.850

2.080

225278460

522

SR130 / SR160SR175 / SV185 / SR200SR175 / SV185 / SR200 SR250 / SV300SR250 / SV300

Backhoe Creation of trenches, foundations, drain and irrigation channels, etc. in private or public constructions, both for new or maintenance jobs

1.5001.5001.500

2.2753.0003.500

700790860

StdStdStd

SR200 and smallerSR175 and biggerSR250 / SV300

Cement Mixer Production of cement for civil construction in isolated or difficult-to-access areas, or with limited availability of electric energy

1.2501.5001.6601.700

200300350400

280300380450

StdStdStdStd

SR130; SR160SR175 and biggerSR200 and biggerSR250 and bigger

Compaction Roller Ground preparation through compaction of earth, gravel, sand, etc. 1100 N.A. 787 Std All

Pallet Fork Handling of palletizes loads. Forks length1.0001.1001.200

160164168

SR200 and smallerSR200 and smallerAll

Hammer Concrete demolition jobs, trenching and general excavation work 160210275370505

StdStdStdHighHigh

SR130 / SR160SR130 / SR160SR175 and biggerSR250 / SV300SR250 / SV300

Auger (std flow) Auger (high flow)

Boring of holes in the ground such as telegraph poles, electricity pylons, signposts, metallic frame pillars, tree and shrub planting

760900

1.2001.200

20 - 17530 - 225

StdHigh

AllSR175 ang bigger with High Flow

Farm Fork General farm yard applications 1.5251.6801.850

2.080

153170185

242

SR130; SR160SR175 / SV185 / SR200SR175 / SV185 / SR200/ SR250 / SV300SR250 / SV300

Fork & Grapple “Mucking out” bale and silage handling. Also suitable for industrial applications

1.5251.6801.850

2.080

250260310

380

SR130; SR160SR175 / SV185 / SR200SR175 / SV185 / SR200 SR250 / SV300SR250 / SV300

Bale Spike Handling of round bales 980 79 All

High Tip Bucket Increase dump height by 800 to 1.200 mm 1.5251.6801.850

2.080

364285352

496


4X1 Multipurpose Bucket

Applications as conventional bucket, grab for back filling or as a dozer 1.5251.6801.850

2.080

253283340

435


Wide range of Buckets (Dirt&Foundry; Low Profile; Low Profile Extended, Heavy Duty, Manure/Slurry; Light Material)

Digging, excavating, grading, material handling 1.5251.6801.8301.8502.080

SR130 / SR160SR175 / SV185 / SR200SR175 / SV185 / SR200SR250 / SV300SR250 / SV300

B

K L

HE

A

I

J

G

FC

D

General dimensions

Specifications

SR130 SR160 SR175 SV185 SR200A - Height to Bucket Hinge Pin 2.845 mm 2.845 mm 3.099 mm 3.048 mm 3.124 mmB - Height to Top of ROPS 1.919 mm 1.919 mm 1.974 mm 1.974 mm 1.998 mmC - Length without attachment 2.435 mm 2.435 mm 2.685 mm 2.710 mm 2.669 mmD - Length with bucket * 3.028 mm 3.028 mm 3.305 mm 3.345 mm 3.292 mmE - Overall Width 1.518 mm 1.518 mm 1.678 mm 1.678 mm 1.755 mmF - Wheelbase 941 mm 941 mm 1.128 mm 1.128 mm 1.128 mmG - Ground Clearance 178 mm 178 mm 178 mm 178 mm 203 mmH - Dump height * 2.246 mm 2.246 mm 2.470 mm 2.377 mm 2.495 mmI - Dump Angle 40° 40° 40° 52° 40°J - Dump Reach @ Max Height 469 mm 469 mm 542 mm 783 mm 517 mmK - Angle of Departure 22° 22° 23° 23° 25°L - Rollback Angle (Bucket on Ground) 26° 26° 32° 35° 31°

SR130 SR160 SR175 SV185 SR200FRAME SIZE Small Frame Small Frame Medium Frame Medium Frame Medium Frame EMISSIONS LEVEL Tier 4i / Stage 3A Tier 4F / Stage 3B Tier 4F / Stage 3B Tier 4F / Stage 3B Tier 4i / Stage 3APERFORMANCE SPECSRated Operating Capacity 50% 590 kg 725 kg 790 kg 840 kg 905 kgROC with counterweights 50% 635 kg 770 kg 835 kg 885 kg 950 kgTipping Load 1.179 kg 1.455 kg 1.588 kg 1.678 kg 1.814 kgLift Cylinder Breakout Force** 13,0 kN 15,0 kN 17,0 kN 15,3 kN 20,3 kNBucket Cylinder Breakout Force** 19,0 kN 23,4 kN 32,3 kN 24,7 kN 32,3 kNENGINEEngine Make - Model ISM N844L-D

(Nat. Asp.)ISM N844LT-F

(Turbo)ISM N844LTA-DI-F

(Turbo)ISM N844LTA-DI-F

(Turbo)FPT F5C (Turbo)

Displacement 2,2 l 2,2 l 2,2 l 2,2 l 3,2 lHorsepower 49 hp

@ 2.800 rpm60 hp

@ 2.800 rpm67 hp

@ 2.800 rpm60 hp

@ 2.900 rpm74 hp

@ 2.500rpmPeak torque 143 Nm

@ 1.800 rpm188 Nm

@ 1.800 rpm208 Nm

@ 1.800 rpm183 Nm

@ 1.800 rpm275 Nm

@ 1.400 rpmTRAVEL SPEEDLow Range 12,7 km/h 11,9 km/h 11,9 km/h 11,9 km/h 11,6 km/hHigh Range (Optional) NA NA 18,5 km/h 18,5 km/h 19,2 km/hHYDRAULIC SYSTEMPump flow 59 LPM 70 LPM 78 LPM 78 LPM 85 LPMOptional high flow N/A N/A 116 LPM 116 LPM 116 LPMRelief Pressure 210 bar 210 bar 210 bar 210 bar 210 barWEIGHTSOperating Weight 2.300 kg 2.505 kg 2.842 kg 2.980 kg 3.130 kgShipping Weight 2.160 kg 2. 370 kg 2.705 kg 2.840 kg 2.995 kgSERVICE CAPACITYFuel Tank 60,5 l 60,5 l 75,5 l 75,5 l 75,5 l

* With D&F Bucket

** Breakout forces estimated considering both tip and hydraulic limits.

19

BE

K

C

D

L

H A

I

J

SR250 SV300 TR270 TR320 TV380FRAME SIZE Large Frame Large Frame Medium Frame Large Frame Large FrameEMISSIONS LEVEL Tier 4i / Stage 3B Tier 4i / Stage 3B Tier 4i / Stage 3A Tier 4i / Stage 3B Tier 4i / Stage 3BPERFORMANCE SPECSRated Operating Capacity 50% 1.135 kg 1.360 kg 50%: 1.225 35%: 859 50%: 1.451 35%: 1.018 50%: 1.723 35%: 1.209

ROC with counterweights 50% 1.225 kg 1.450 kg 50%: 1.280 35%: 914 50%: 1.676 35%: 1.203 50%: 1.948 35%: 1.394

Tipping Load 2.268 kg 2.722 kg 2.449 kg 2.902 kg 3.447 kgLift Cylinder Breakout Force** 25,3 kN 24,9 kN 27,8 kN 34,5 kN 26,8 kNBucket Cylinder Breakout Force** 33,3 kN 33,7 kN 32,3 kN 38,7 kN 33,4 kNENGINEEngine Make - Model FPT F5H

(Turbo)FPT F5H (Turbo)

FPT F5C (Turbo)

FPT F5H (Turbo)

FPT F5H (Turbo)

Displacement 3,4 l 3,4 l 3,2 l 3,4 l 3,4 lHorsepower 90 hp

@ 2.500 rpm90 hp

@ 2.500 rpm74 hp

@ 2.500rpm90 hp

@ 2.500 rpm90 hp

@ 2.500 rpmPeak torque 383 Nm

@ 1.400 rpm383 Nm

@ 1.400 rpm275 Nm

@ 1.400 rpm383 Nm

@ 1.400 rpm383 Nm

@ 1.400 rpmTRAVEL SPEEDLow Range 11,3 km/h 11,3 km/h 9,3 km/h 8,2 km/h 8,2 km/hHigh Range (Optional) 18,5 km/h 18,5 km/h 13,4 km/h 12,2 km/h 12,2 km/hHYDRAULIC SYSTEMPump flow 92 LPM 92 LPM 85 LPM 92 LPM 92 LPMOptional high flow 143 LPM 143 LPM 116 LPM 143 LPM 143 LPMRelief Pressure 210 bar 210 bar 210 bar 210 bar 210 barWEIGHTSOperating Weight 3.490 kg 3.765 kg 3.720 kg 4.355 kg 4.625 kgShipping Weight 3.340 kg 3.610 kg 3.585 kg 4.200 kg 4.475 kgSERVICE CAPACITYFuel Tank 96,5 l 96,5 l 75,5 l 96,5 l 96,5 l

SR250 SV300 TR270 TR320 TV380A - Height to Bucket Hinge Pin 3.175 mm 3.302 mm 3.124 mm 3.215 mm 3.342 mmB - Height to Top of ROPS 2.002 mm 2.002 mm 1.998 mm 2.043 mm 2.043 mmC - Length without attachment 2.981 mm 2.990 mm 2.669 mm 2.981 mm 2.990 mmD - Length with bucket * 3.611 mm 3.604 mm 3.292 mm 3.611 mm 3.604 mmE - Overall Width 1.768 mm 1.768 mm 1.676 mm 1.930 mm 1.930 mmF - Wheelbase 1.322 mm 1.322 mm NA NA NAG - Ground Clearance 203 mm 203 mm 203 mm 243 mm 243 mmH - Dump height * 2.558 mm 2.615 mm 2.495 mm 2.602 mm 2.669 mmI - Dump Angle 38° 54° 40° 38° 54°J - Dump Reach @ Max Height 575 mm 744 mm 568 mm 548 mm 798 mmK - Angle of Departure 24° 24° 32° 32° 32°L - Rollback Angle (Bucket on Ground) 31° 35° 31° 30° 34°

** Breakout forces estimated considering both tip and hydraulic limits.

* With D&F Bucket

Worldwide Case ConstructionEquipment Contact InformationEUROPE:via Plava, 8010135 TORINO - ITALIAAFRICA/MIDDLE EAST/CIS:Riva Paradiso 146902 Paradiso - SWITZERLANDNORTH AMERICA/MEXICO:700 State StreetRacine, WI 53404 U.S.A.LATIN AMERICA:Av. General David Sarnoff 223732210 - 900 Contagem - MGBelo Horizonte BRAZILASIA PACIFIC:Unit 1 - 1 Foundation Place - ProspectNew South Wales - 2148 AUSTRALIACHINA:No. 29, Industrial Premises, No. 376.De Bao Road, Waigaoqiao Ftz, Pudong, SHANGHAI, 200131, P.R.C.

CustomerAssistance

00800-2273-7373

www.casece.com

Form

No.

200

77GB

- P

rinte

d in

Ital

y -

Med

iaCr

oss

Fire

nze

- 02

/14

The call is free from a land line. Check in advance with your Mobile Operator if you will be charged.

NOTE: Standard and optional fittings can vary according to the demands and specific regulations of each country. The illustrations may include optional rather than standard fittings - consult your Case dealer. Furthermore, CNH reserves the right to modify machine specifications without incurring any obligation relating to such changes.

Conforms to directive 98/37/CE

Tyre optionsFUNCTIONAL VARIANTE TYRE DESCRIPTION SR130 SR160 SR175 SV185 SR200 SR250 SV300

8501207 10X16.5 Heavy Duty 59OTW x x8501307 10X16.5 Premium 59OTW x x8501407 10X16.5 Premium Liner 59OTW x x8501507 27X10.5-15 Premium 64OTW x x8502107 10X16.5 Non-Pneumatic 64OTW x x x x x8501707 10X16.5 Heavy Duty 64OTW x x x8501807 10X16.5 Premium 64OTW x x x8501907 10X16.5 Premium Liner 64OTW x x x8502007 10X16.5 Severe Duty 64OTW x x x8503107 12X16.5 Heavy Duty 70OTW x x x x x8503207 12X16.5 Premium 70OTW x x x x x8503307 12X16.5 Premium Liner 70OTW x x x x x8503407 12X16.5 Severe Duty 70OTW x x x8503507 12X16.5 Mining 70OTW x x x8503607 12X16.5 Non-Pneumatic 70OTW x x x8505007 33X15.5 Flotation 76OTW x x x8505107 14X17.5 Premium 76OTW x x

HEAVY DUTY PREMIUM & PREMIUM W/LINER

SEVERE DUTY NON-PNEUMATIC MINING FLOTATION

CASE Construction Equipment CNH UK Ltd Unit 4, Hayfield Lane Business Park, Field Lane, Auckley, Doncaster, DN9 3FL Tel. 00800-2273-7373 Fax +44 1302 802829

SKID STEER LOADERS/COMPACT TRACK LOADERS · Case Skid Steer and Compact Track Loaders get tougher...

Documents

Transcript of SKID STEER LOADERS/COMPACT TRACK LOADERS · Case Skid Steer and Compact Track Loaders get tougher...