UNIT 2

DN80 DN50

DN150 DN80 DN80 DN150

UNIT 1

Tapping

6"1 1/2" 1 1/2"

1/2" Ball valve

3/8 adapter

* will be the same for all four, so each hot tap will be serving two modules requiring 1 m3/h each

Tapping point will be at this line, 6", around this location. It will be a 1 1/2" hole.

Unit 1 and Unit 2 are identical. and each branch out has a return line.

DN300

DN400 = 16" DN50 = 2"DN300 = 12" DN40 = 1 1/2"DN200 = 8"DN150 = 6"DN125 = 5"DN80 = 3"

DN150 DN200DN50 DN50 DN125 DN125 DN40

300-400 m3/hDN400/16" Supply

Return

6"

1/2" Ball valve

3/8 adapter

* will be the same for all four, so each hot tap will be serving two modules requiring 1 m3/h each