SITRAIN Training for Industry - assets.new.siemens.com · ST-7 SERV 1 S7 Service and Maintenance...
Transcript of SITRAIN Training for Industry - assets.new.siemens.com · ST-7 SERV 1 S7 Service and Maintenance...
-
SITRAIN – Training for
IndustryCustomer Services Information 2019
sitrain-learning.siemens.com/ZA© Siemens AG 2019
-
Restricted © Siemens AG 2017
Training Portfolio Overview
Standardized Product-
Related Training
Consulting
and E-learning
Customer-Tailored
TrainingTraining Equipment
Based on products and
systems of Sector Industry
Focus on hands on training
Based on customer specific
applications and locations
Oriented on different target groups
Skills Gap Audits –
Competence development
E-learning offering
Worldwide trainer certification
and qualification standards
Based on products and
systems of Sector Industry
Designed for optimized
learning support
-
Restricted © Siemens AG 2017
Process Instrumentation
Switchgear
VSD’s
TIA Portal
Industrial Networks
PCS7
Operator Panels and SCADA
SIMATIC S7
SITRAIN Course Portfolio
SITRAIN offers training solutions for the Siemens Industry product portfolio
-
Restricted © Siemens AG 2017
SITRAIN Micro Automation and PLC Training Courses(Courses for LOGO! SIMATIC S7–300 and S7-400)
ST-7SERV1
Service and
Maintenance Part 1
ST-7SERV2
Service and
Maintenance Part 2
ST-7PRO1
Programming Part 1
Maintenance Personnel
INTERMEDIATE
Planning & Commissioning
Engineers & Programmers
ADVANCED
ST-7PRO2
Advanced
Programming Part 2
Micro Automation
BASIC
ST-PLC-INTRO
Intro to PLC’s
3 days
ST-7TROUBLE
PLC
Troubleshooting
Maintenance Personnel
BEGINNERS
ST-LOGO!
2 days
NOTE! Prerequisites for each course are defined and need to be followed for maximum effectiveness
ST-7PRO3
Certified
Programmer
ST-7SERV3
Certified
Technician
Maintenance Personnel
Fault Finding
-
Restricted © Siemens AG 2017
SITRAIN – PCS7 / HMI / SCADA & Industrial Network Courses
ST-WINCC
Process
Control
ST-PCS7SYS
System Course
ST-WINCC FLEX
Human Machine
Interface
ST-WINCC FLEX
Advanced
SCADA
S7-NETSIA
Intro to Comms
Industrial Networks
ST-PROFIBU
Profibus Systems
ST-ETHERPR
Profinet Systems
NOTE! Prerequisites for each course are defined and need to be followed for maximum effectiveness
ST-PCS7SR1
Maintenance
ST-PCS7ASE
Advanced AS
ST-PCS7OSE
Advanced OS
-
Restricted © Siemens AG 2017
TIA Portal Courses
TIA- MICRO2
S7-1200 Advanced
TIA- SCL
Structured
Control Language
TIA- MICRO1
S7-1200
TIA- SERV1
Service and
Maintenance Part 1
TIA- SERV2
Service and
Maintenance Part 2
TIA- WCCS
TIA Portal Scada
TIA Portal
Micro Automation
TIA Portal
PLC / HMI
TIA Portal
System Upgrade
TIA- SYSUP
STEP7 to TIA Portal
NOTE! Prerequisites for each course are defined and need to be followed for maximum effectiveness
TIA- PRO1
Programming Part 1
TIA- PRO2
Programming Part 2
TIA- SERV3
Certified
Technician
TIA- PRO3
Certified
Programmer
TIA- WCCM
Operator Panels
-
Restricted © Siemens AG 2017
Engineered Drives & Switchgear Training Courses
SD-MM4MICROMASTER
6SE64
SD-AC83-VCDrives Maintenance
course
DR-MD-HIMASTER DRIVE
VC – AC & COMS
DR-DC70-HIDC MASTER
DC & COMS
ST-SIMDP
Simocodecourse
ST-SIMPROV
SIMOCODE Pro V
Wiring, Engineering,
Commissioning and
Diagnostics
Engineered Drives Switchgear
SD-DRV-FUN
Intro to Drives
DR-G12-PM
SINAMICS G120
DR-G15-DG
SINAMICS G150
DR-S12-PM
SINAMICS S120
NOTE! Prerequisites for each course are defined and need to be followed for maximum effectiveness
DR-DCM-PM6RA80 DC DRIVE
DC & COMS
-
Restricted © Siemens AG 2017
Motion Control & MV Drives
MC-SMO-IH
SIMOTION D
SINAMICS
Motion Control Perfect Harmony
SD-DRV-FUN
Intro to Drives
MC-SMO-SYS
SIMOTION
Systems &
Programming
DR-PH-B
Perfect Harmony
Operator training
SD-DRV-FUN
Intro to Drives
NOTE! Prerequisites for each course are defined and need to be followed for maximum effectiveness
-
Restricted © Siemens AG 2017
Process Instrumentation Courses
PI-FLOW
Flow Instruments
PI-LVL
Level Instruments
Instrumentation
PI-FUN
Intro to PI
PI-WNG
Weighing
PI-PTP
Pressure,
Temperature
and Positioners
NOTE! Prerequisites for each course are defined and need to be followed for maximum effectiveness
-
Restricted © Siemens AG 2017
Certified Training courses
ST-7 SERV 1S7 Service and
Maintenance Part 1
ST-7 SERV 2S7 Service and
Maintenance Part 2
ST-7 PRO 2ST-7 Programming Part 2
ST-7 PRO 3ST-7 Programming Part 3
ST-7 SERV 3S7 Service and
Maintenance Part 3
ST-7 PRO 1ST-7 Programming Part 1
Practical and Theoretical Test at the end of the course
If you pass - Get a certification certificate
TIA SERV 1TIA Service and
Maintenance Part 1
TIA SERV 2TIA Service and
Maintenance Part 2
TIA SERV 3TIA Service and
Maintenance Part 3
TIA PRO 2TIA Programming Part 2
TIA PRO 3TIA Programming Part 3
TIA PRO 1TIA Programming Part 1
Siemens
Certified
Service Technician
Siemens
Certified
Programmer
-
Restricted © Siemens AG 2017
Certified Profibus International Training courses
PROFIBUS
• CERTIFIED Installer
• CERTIFIED Installer with
Troubleshooting
• CERTIFIED Engineer
• CERTIFIED Installer with Engineer
PROFINET
• CERTIFIED Installer
• CERTIFIED Engineer
SITRAIN South Africa was
accredited as a PITC (Profibus
International Training Centre) by
Profibus International (PI).
-
Restricted © Siemens AG 2017
SITRAIN – Training for Industry
Thank you for your attention!
We‘ll help you!
All product related info: 0860 80 80 80
Training information:
Tel: 011 652 3206
Or... on the Internet:
Online booking
SITRAIN Information September 2016
www.siemens.co.za/sitrain
http://www.siemens.co.za/sitrain