Sit-Stand Desk FP-FR-01-0001-AI · 2018-03-07 · to the desk are the appropriate length to...
12
AGILE 1.2 Sit-Stand Desk FP-FR-01-0001-AI www.smart2ergo.com S2E_Assembly_Agile1.2_v1_2018
Transcript of Sit-Stand Desk FP-FR-01-0001-AI · 2018-03-07 · to the desk are the appropriate length to...
AGILE 1.2Sit-Stand DeskFP-FR-01-0001-AI
www.smart2ergo.com
S2E_Assembly_Agile1.2_v1_2018
Customers please note that a product improvement has resulted in a slight design change to the feet of this unit. This change means that, in Step 6, the screws in the fixing pack labelled “E” have been replaced by 8 longer screws in the red bag found in the “Metal Work Box”.
Best Regards, The Smart2Ergo Team
1. Keep Hands clear of moving parts during operation and always visually inspect the area before adjusting the desk to avoid accidents and damage to property.
WARNING!Pinch point. Keep hands clear during operation.
IMPORTANT SAFETY INFORMATION
2. Make sure no obstacles are in the desks movement path and all the cords connected to the desk are the appropriate length to accommodate the change in height.
3. Keep children away from the desks electrical components and ensure children are supervised while using the desk.
4. Keep all electrical components away from liquids.
5. Do NOT sit or stand on the desk frame or go under the desk when in motion.
6. Do NOT place any objects taller than 550mm under the desk.
7. Do not open or tamper with any of the electrical components (Legs, Control panel, Control Box and Power cable).
Height adjustable desks have electronic motors and control gear and are designed for use in dry work areas ONLY.
www.smart2ergo.com
GE F
1 x2
BOX 1
FIXINGS
ADDITIONAL ITEMS REQUIRED
BOX 3: Table Top if supplied.
45 mins
BOX 2
2 x2
3 x14 x2
5 x2
7 x2
8 x1
9 x1
10 x1
A
x8
B
x10
C
x2
D
x4 x8 x8 x8
H
x8
K
x2
OR6 x1
x1
J
x1
I
NL MRED BAG
x8
x8 x8
E, F & G have been replaced by the fixings L, M & N contained in the red bag that has been packed into the metal work box.
CONTENTS
For User Manual and assembly videos, please visit: www.smart2ergo.com/resources
1
2
1160 frame fits1200mm top
1340 frame fits1400mm top
1540 frame fits1600mm top
1160mm Guide
1340mm Guide
1540mm Guide5
2
4
9
D
D
x2
3
4
Cable MUST be completely inside slot!
10
5
6
7
A
x8
A
L
M
N1
1
1
7
NL MRED BAG
x8
x8 x8
7
8
B
H
30mm
centre
30mm
=
=
B
x8
H
x8
7
79
10
Feed Cables Through Frame
7
10
79
DO NOT PLUGINTO POWER
9
10
K
K
x2
CONNECT TO POWER
11 PERFORM COLUMN RESET: A.B.
C.
Press and hold both buttons.Continue pressing the buttons until both columns are in there Lowest position.When reset is finished the control box makes a sound and the buttons can be released.THE SYSTEM IS NOW OPERATIONAL
13
12
3
6
D
D
x2A
B
C
D
14
CONGRATULATIONS!We hope you enjoy your new desk. If you have any problems, call 08450 944 339.
Send us a photo of your new desk or any feedback about your experience with Smart2Ergo to [email protected].
For further info visit smart2ergo.com.
© Smart2Ergo 2017. All Rights Reserved.
for more info our website www.smart2ergo.comcall 08450 944 339 | email [email protected]
Hamilton Office Park, 5 High View Close, Hamilton, Leicester, LE4 9LJ, UK Company no. 778 5384 | VAT no. 228 6570 87 | part of ksf supply ltd
![Comparative review of the Desk function [AR2004-160-01] fileed its analysis on a sample of four desks (Desk 2 f or Europe, Desk 1 for Asia and Pacific, Desk 4 Afghanistan, and Des](https://static.fdocuments.in/doc/165x107/5d252a4c88c99326698c8467/comparative-review-of-the-desk-function-ar2004-160-01-its-analysis-on-a-sample.jpg)
