Sistema de Barras Abb
-
Upload
ronald-malave -
Category
Documents
-
view
224 -
download
0
Transcript of Sistema de Barras Abb
-
8/9/2019 Sistema de Barras Abb
1/6
innovativevalue
proactivevalue
responsiblevalue
activate value
adaptablevalue
resourceful value
communicative value
intelligent value
MDY Busduct System
A reliable and safe solution for power transmissionfrom the transformer to switchgear andbetween switchgear sections
-
8/9/2019 Sistema de Barras Abb
2/6
MDY Busduct Application Versatility
The MDY busduct system is the ABB solution for power transmission from the transformerto low-voltage switchgear and between switchgear sections.
From the point of view of the transmission reliability, a busduct is the safest solution forconducting current from a distribution transformer to a main switchgear and motor control board.
The MDY busduct is manufactured from insulated conducting bars, which can be made ofaluminium or copper. Thanks to its construction, the busduct is rigid and its short-circuitresistance is in a class of its own from the transformer terminals up to the main switchingdevice terminals of the switchgear. In addition to full phase separation, the MDY busduct canalso be protected from rain and mechanical damage using an additional enclosure. Even with itsopen construction, the insulated busduct can be used in demanding environments.
The MDY busduct is manufactured in transport units which enable quick and easy installationand connecting even in narrow places. It can be connected to existing switchgear, and also
joined to different manufacturers busducts. Each MDY busduct system is designed individuallyon order to ensure an optimal solution for our customers.
-
8/9/2019 Sistema de Barras Abb
3/6
-
8/9/2019 Sistema de Barras Abb
4/6
Busbar material
The MDY busbar material is aluminium orcopper, but can also be tin-coated copper.
The insulating plastic coating is extruded ontothe bars. The insulation fastens tightly ontothe busbar surface, which guarantees anexcellent current-carrying capacity of thebusduct. The insulation allows the busbarsto be bent.
Busbar bushings and
mechanical protection
(wall, roof and floor bushings)
The fire insulation between compartmentsis implemented using bushings, which fulfilfire separation class EI-M 60 or EI-M 120according to the fire-safety regulations forproduction and storage buildings.
The fire-insulation bushings can also bemade gas-proof.
Flexible busduct connections
The busduct is connected to a transformerusing flexible connections which negate theeffects of thermal expansion and vibrations.Long busducts (>20 m) are provided withlongitudinal expanding connections toattenuate the thermal expansion.
The connections are pre-installed onthe busduct at the factory.
Other equipment
- busbar sectionalizer switch- electromagnetic screening- current transformer housing- mechanical protection of busbar- protection against insects- gas-proof fire-insulation bushings
-
8/9/2019 Sistema de Barras Abb
5/6
MDY Technical Data
Rated voltage Ue.................................................. 400 ... 690 V
(tested 1000 V AC / 1500 V DC, 3/N/PE)
Rated current Ie...................................................1200 ... 5500 A
Short-circuit withstand current
- short-time withstand current Icw
.........max. 100 kA, 1s
- peak withstand current Ipk
..................max. 235 kA
Enclosure class .....................................................IP 30, IP 54, (IP 65)
Frame sizes
A busbar width of 400 mm is also possible up to a rating of 2150 A using aluminium bars and up to 2700 A
using copper bars. The number of phase bars is determined by the rated current and service conditions.
Bushing sizes
Current values
Ambient temperature +35 C, IP 30
Al
1300
2500
2800
3500
4000
Cu
1900
3200
3500
4300
4900
6000
mm
600
600
600
800
800
1000
Current Width Weight, kg
Al
30
40
50
70
100
Cu
55
80
105
125
150
180
Framesize
400
600
800
1000
Wall, roof and floorbushings
Wall bushing Roof bushing Floor bushing
Distance of bushing center point of openingmm
fromthe switchgear
roof
300
300
380
380
from the centerof switchgear
front edge
300
300
300
300
from the centerof switchgear
front edge
300
300
300
300
Widthmm
500
700
900
1100
Heightmm
260
260
260
260
400 600
800
1000
163
-
8/9/2019 Sistema de Barras Abb
6/6
MCS Standard Boards
Area lighting and multi-meter boards, capacitor banks, starters, boxes and site boards.
Low voltage products and services everything from the same company!
MNS
Modular LV switchgear system solution for power distribution in industry, power plants,
buildings and offshore applications.
ServicesLow Voltage Systems Overall Tailor-Made Service for Your Needs.
INSUM
Switchgear control and monitoring system.
MDY
Reliable and safe busduct system between the transformer and the switchgear
or between the switchgears.
LV switchgear for marine applications
Versatile, well designed and fast onshore and offshore.
MCR
Compensation and harmonic filters.
Standard boards
Nps, MCS-boxes, MCS-starters, MCS-area lighting.
MCS
Overall solution for changing needs of power distribution, control and automation.
Modular Cabinet System
Npsplus
1TFC9
02003B0
201
ABB OyLow Voltage SystemsP.O.Box 600, FIN-65101 VAASA
Tel. +358 10 22 11Fax +358 10 22 41097www.abb.com