Sinus Membrane Elevation without Perforation CAS KIT · perforation (Remove surgical template)...
Transcript of Sinus Membrane Elevation without Perforation CAS KIT · perforation (Remove surgical template)...
Sinus Membrane Elevation without Perforation
· Prevents perforation of sinus membrane
· Easy and safe membrane elevation with hydraulic pressure
· Applicable to various cases
Round shapesafe drilling
Creates inverted conical shaped bone lidPrevents perforation
Prevents Perforation of Sinus Membrane
· Prevents perforation of sinus membrane and gets rid of patient
pain by using round shaped drill without malletting
Osteotome KIT CAS KIT
Easy and Safe Membrane Elevation with Hydraulic Pressure ·Hydraulic pressure lifes membrane widely and high. · Elevated sinus has excellent blood supply and
osteogenesis capability
Blood
Applicable in Various Cases
Inclined
Flat Septum
Nerve
CAS KIT Surgical ProcedureMotion Picture
3-CAS KIT_en.indd 1
Unit 10/6 Omega Street, Rosedale, AucklandOsstem New Zealand Limited
[email protected] facebook.com/osstemnz09-600-1500
Lay Out of OneCAS KIT and Composition of Main Tools OneCAS KIT Drilling Sequence
Initial Drill (1200rpm)
·Length: 7/10mm - 2 speci�cations·Guide hole : Ø 5.1/Ø 5.8 – 2 kinds·Connect stopper before use
Stopper
·Length : 1~9mm – 9 kinds·Guide hole : Ø 5.1/Ø 5.8 – 2 kinds
OneCAS Drill (800rpm)
·Length: 7/10mm - 2 speci�cations·Guide hole : Ø 5.1/Ø 5.8 – 2 kinds·Connect Stopper before use
Other Tools
Hydraulic Membrane Lifter
Bone Carrier
Bone Condenser
Guide height 10.5mm
7mm
Guide hole Ø5.1
KIT left : Placement for F4.0 / F4.5
Guidehole Ø5.8
KIT right : Placement for F5.0
OneCAS Drilling Sequence (Only Enlargement)
Fixture Bone F2.2 F2.8 F3.1 F3.3 F3.6 F3.8 F4.1
Ø4.0Soft
Normal
Ø4.5Soft
Normal
Ø5.0Soft
Normal
Remaining Bone: Less than 7mm eg) Remaining bone 4mm, soft bone: place Ø4.0 Fixture x 8.5mm
Tissue removal
InitialØ2.2x7mm
Check perforation
Check perforation
Check perforation
(Remove surgical template)Hydraulic lifting
GBROneCASØ2.8x7mm
OneCASØ2.8x7mm
OneCASØ2.8x7mm
Enlargement Entry
4mm
-1mm under drilling
Drilling length when 7mm drill is connected
Stopper speci�cations Drilling length when
10mm drill is connected
Length when Depth gauge is connected
Spare Space
Remaining Bone: More than 9mm ~ Less than 10mm eg) Remaining bone 9mm, soft bone: place Ø5.0 Fixture x 10mm (*Guide hole : Ø5.8(W))
Tissue removal
Initial(W)Ø2.2x7mm
OneCAS(W)Ø2.8x7mm
Check perforation
Check perforation
OneCAS(W)Ø3.8x10mm
Check perforation
OneCAS(W)Ø3.8x7mm
OneCAS(W)Ø3.8x10mm
OneCAS(W)Ø3.8x10mm
9mm
-1mm under drillingUse 7mm drill �rst
Enlargement Entry
Remaining Bone: More than 7mm ~ Less than 9mm eg) Remaining bone 8mm, soft bone: place Ø4.5 Fixture x 10mm
Tissue removal
InitialØ2.2x7mm
Check perforation
OneCASØ3.3x10mm
OneCASØ3.3x10mm
GBROneCASØ2.8x7mm
OneCASØ3.3x7mm
Check perforation
Check perforation
8mm
-1mm under drillingUse 7mm drill �rst
(Remove surgical template)Hydraulic lifting
Enlargement Entry