SinoGuide Thermal Product Catalogue - SinoGuide Technology · Volume Impedance (ohm-cm) 1.1 x1011...
Transcript of SinoGuide Thermal Product Catalogue - SinoGuide Technology · Volume Impedance (ohm-cm) 1.1 x1011...
Company Profile
Thermal Conductive Polymer / Absorber
TCP Series
TCP110U ............................................................................................................ 1
TCP100 .............................................................................................................. 2
TCP120 .............................................................................................................. 3
TCP150 .............................................................................................................. 4
TCP200 .............................................................................................................. 5
TCP250 .............................................................................................................. 6
TCP300 .............................................................................................................. 7
TCP500 .............................................................................................................. 8
TCP800 .............................................................................................................. 9
TCP1200 ............................................................................................................ 10
TCP150AB.......................................................................................................... 11
3D Mould Thermal Pad....................................................................................... 12
AL Series
AL20/AL50/AL60 ................................................................................................ 13
Silicone-Free Series
TCP300SF / TCP500SF..................................................................................... 14
PCM Series
TCPC300 / TCPC500 ......................................................................................... 15
Thermal Putty / Gel Series
TCP300P / TCP600P / TCP900P....................................................................... 16
Graphite Series
TCG4000 / TCG5000 ......................................................................................... 17
Thermal Insulator Series
TCP-I160 / TCP-I160F........................................................................................ 18
TCP-G Grease Series ............................................................................................... 19
EMI Shielding Gasket
FIP Gaskets
EA600 (Ni/C Polymer) ........................................................................................ 20
EA800 (Ag/Cu Polymer) ..................................................................................... 21
Conductive Foam
CF010................................................................................................................. 22
CF040................................................................................................................. 23
TABLE OF CONTENTS
ii
01
TCP110U Series Thermal Conductive Pad
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Pink /White Visual
Reinforcement Carrier Fiberglass ----
Thickness (mm) 0.3~10.0 ----
Hardness (Shore C) 5, 15 ASTM D2240
Density (g/cc) 2.20 ASTM D792
Tensile Strength (KN/m2) 2.5 ASTM D412
Continuous Use Temp ( ) -60 to 200 EN344
ELECTRICAL
Breakdown Voltage (Kv) 6.0 ASTM D149
Dielectric Constant (1MHz) 5.5 ASTM D150
Volume Impedance (ohm-cm) 1.1 x1011 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 1.1 ASTM D5470
Configurations Available:
Thermal conductivity:1.10 W/mk
Fiberglass Reinforcement,Naturally tacky on one side for easy assembly
Electrically insulating,Resist to puncture,shear and tear
FLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
SINOGUIDE TECHNOLOGY LIMITED
Technical Data Sheet
Power Conversion/Supply
Ballast For Led Lighting, Wireless Hub,Telecom device.
Thermal module, Telecommunication Hardware
Auto Engine, Electric Vehicle Battery
TYPICAL PROPERTIES OF TCP110U
Sheet size:200 x 400mm, 350x350mm , individual parts available
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or of
any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should
perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any given situation.
0
1
2
3
4
Th
erm
al
Re
sist
an
ce
(C-i
n2
/w)
Pressure (psi)
Thermal Resistance VS Pressure
1.0mm 2.0mm
0%
20%
40%
60%
80%
De
ec
on
(%
)
Pressure (psi)
De ec on VS Pressure
1.0mm 2.0mm
02
TCP100 Series Thermal Conductive Pad
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Pink Visual
Thickness (mm) 0.3~8.0 ----
Hardness (Shore 00) 35 ASTM D2240
Density (g/cc) 1.75 ASTM D792
Tensile Strength (Psi) 20 ASTM D412
Elongation (%) 60% ASTM D412
Percent Deflection@ 3mm, 60psi 65% ASTM D575
Continuous Use Temp ( ) -60 to 200 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 200 ASTM D149
Dielectric Constant (1MHz) 6.5 ASTM D150
Volume Impedance (ohm-cm) 4.50 x1013 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 1.0 ASTM D5470
Configurations Available:
Sheet size:200 x 400mm, 350x350mm , individual parts available
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s)
or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user
should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any
given situation.
1.00 W/mk thermal conductivity
Low Hardness, Cost effective which is made through advanced manufacturing Process
Electrically Insulating
Between heat-generation Component and and heatsink.
LED/LCD TV, Graphices Cards, Telecom device.
Wireless Hub, Power Supply
Portable Charge
TYPICAL PROPERTIES OF TCP100
0
0.5
1
1.5
Th
erm
al
Re
sist
an
ce
(C-i
n2
/w)
Pressure (psi)
Thermal Resistance VS Pressure
1.0mm 2.0mm
0%
20%
40%
60%
80%
De
ec
on
(%
)
Pressure (psi)
De ec on VS Pressure
1.0mm 2.0mm
03
TCP120 Series Thermal Conductive Pad
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Light Grey Visual
Thickness (mm) 0.3~8.0 ----
Hardness (Shore 00) 30 ASTM D2240
Density (g/cc) 1.78 ASTM D792
Tensile Strength (Psi) 25 ASTM D412
Elongation (%) 60% ASTM D412
Percent Deflection@ 3mm, 60psi 67% ASTM D575
Continuous Use Temp ( ) -60 to 200 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 250 ASTM D149
Dielectric Constant (1MHz) 6.8 ASTM D150
Volume Impedance (ohm-cm) 5.0 x1013 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 1.2 ASTM D5470
Configurations Available:
Between heat-generation Component and and heatsink.
LED/LCD TV, Graphices Cards, Telecom device.
Wireless Hub, Power Supply
Portable Charge
TYPICAL PROPERTIES OF TCP120
Sheet size:200 x 400mm, 350x350mm , individual parts available
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s)
or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user
should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any
given situation.
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
1.20 W/mk thermal conductivity and ultra soft with high deflation
Low Hardness, Cost effective which is made through advanced manufacturing Process
Electrically Insulating
0
0.5
1
1.5
Th
erm
al
Re
sist
an
ce
(C-i
n2
/w)
Pressure (psi)
Thermal Resistance VS Pressure
1.0mm 2.0mm
0%
20%
40%
60%
80%
De
ec
on
(%
)
Pressure (psi)
De ec on VS Pressure
1.0mm 2.0mm
TCP120 Series Thermal Conductive Pad
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Light Grey Visual
Thickness (mm) 0.3~8.0 ----
Hardness (Shore 00) 30 ASTM D2240
Density (g/cc) 1.78 ASTM D792
Tensile Strength (Psi) 25 ASTM D412
Elongation (%) 60% ASTM D412
Percent Deflection@ 3mm, 60psi 67% ASTM D575
Continuous Use Temp ( ) -60 to 200 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 250 ASTM D149
Dielectric Constant (1MHz) 6.8 ASTM D150
Volume Impedance (ohm-cm) 5.0 x1013 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 1.2 ASTM D5470
Configurations Available:
Between heat-generation Component and and heatsink.
LED/LCD TV, Graphices Cards, Telecom device.
Wireless Hub, Power Supply
Portable Charge
TYPICAL PROPERTIES OF TCP120
Sheet size:200 x 400mm, 350x350mm , individual parts available
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s)
or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user
should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any
given situation.
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
1.20 W/mk thermal conductivity and ultra soft with high deflation
Low Hardness, Cost effective which is made through advanced manufacturing Process
Electrically Insulating
0
0.5
1
1.5
Th
erm
al
Re
sist
an
ce
(C-i
n2
/w)
Pressure (psi)
Thermal Resistance VS Pressure
1.0mm 2.0mm
0%
20%
40%
60%
80%
De
ec
on
(%
)
Pressure (psi)
De ec on VS Pressure
1.0mm 2.0mm
04
TCP150 Series Thermal Conductive Pad
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Light Blue Visual
Thickness (mm) 0.3~8.0 ----
Hardness (Shore 00) 40 ASTM D2240
Density (g/cc) 1.80 ASTM D792
Tensile Strength (Psi) 15 ASTM D412
Elongation (%) 50% ASTM D412
Percent Deflection@ 3mm, 60psi 95% ASTM D575
Continuous Use Temp ( ) -60 to 200 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 250 ASTM D149
Dielectric Constant (1MHz) 5.5 ASTM D150
Volume Impedance (ohm-cm) 6.20 x1013 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 1.5 ASTM D5470
Configurations Available:
Sheet size:200 x 400mm, 350x350mm , individual parts available
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s)
or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user
should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any
given situation.
Thermal conductivity:1.50 W/mk
Ultra Soft, Low Thermal Resistance at Low Pressure, Fiberglass Reinforcement
Electrically insulating,Resist to puncture,shear and tear
Set-Top Box, Power Modules/Supply
Network Router/Adapter
LED/LCD TV, Led lighting, Telecom device.
Auto Engine, Electric Vehicle Battery
TYPICAL PROPERTIES OF TCP150
0
0.5
1
1.5
Th
erm
al
Re
sist
an
ce
(C-i
n2
/w)
Pressure (psi)
Thermal Resistance VS Pressure
1.0mm 2.0mm
0%
20%
40%
60%
80%
De
ec
on
(%
)
Pressure (psi)
De ec on VS Pressure
1.0mm 2.0mm
05
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Orange Visual
Thickness (mm) 0.3~8.0 ----
Hardness (Shore 00) 45 ASTM D2240
Density (g/cc) 2.7 ASTM D792
Tensile Strength (Psi) 20 ASTM D412
Elongation (%) 77% ASTM D412
Percent Deflection@ 3mm, 60psi 45% ASTM D575
Continuous Use Temp ( ) -60 to 200 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 250 ASTM D149
Dielectric Constant (1MHz) 6 ASTM D150
Volume Impedance (ohm-cm) 2 x1012 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 2.0 ASTM D5470
Configurations Available:
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s)
or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user
should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any
given situation.
2.00 W/mk thermal conductivity
Low Thermal Resistance at Low Pressure
Naturally tacky for easy application
Network Equipement, Mass Storage devices
Industrial Automation, Telecom device.
Smart TV stick, Wireless Hub
Flat Panel Display, Thermal module.
High Power supply/conversion
TYPICAL PROPERTIES OF TCP200
Sheet size:200 x 400mm, 350x350mm , individual parts available
TCP200 Series Thermal Conductive Pad
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
0
0.5
1
1.5
Th
erm
al
Re
sist
an
ce
(C-i
n2
/w)
Pressure (psi)
Thermal Resistance VS Pressure
1.0mm 2.0mm
0%
20%
40%
60%
80%
De
ec
on
(%
)
Pressure (psi)
De ec on VS Pressure
1.0mm 2.0mm
06
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Pink Visual
Thickness (mm) 0.3~8.0 ----
Hardness (Shore 00) 45 ASTM D2240
Density (g/cc) 2.75 ASTM D792
Tensile Strength (Psi) 20 ASTM D412
Elongation (%) 80% ASTM D412
Percent Deflection@ 3mm, 60psi 48% ASTM D575
Continuous Use Temp ( ) -60 to 200 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 250 ASTM D149
Dielectric Constant (1MHz) 6 ASTM D150
Volume Impedance (ohm-cm) 2 x1012 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 2.5 ASTM D5470
Configurations Available:
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
TCP250 Series Thermal Conductive Pad
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s)
or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user
should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any
given situation.
2.50 W/mk thermal conductivity
Low Thermal Resistance at Low Pressure
Naturally tacky for easy application
Network Equipement, Mass Storage devices
Industrial Automation, Telecom device.
Smart TV stick, Wireless Hub
Flat Panel Display, Thermal module.
High Power supply/conversion
TYPICAL PROPERTIES OF TCP250
Sheet size:200 x 400mm, 350x350mm , individual parts available
0
0.5
1
1.5
Th
erm
al
Re
sist
an
ce
(C-i
n2
/w)
Pressure (psi)
Thermal Resistance VS Pressure
1.0mm 2.0mm
0%
20%
40%
60%
80%
De
ec
on
(%
)
Pressure (psi)
De ec on VS Pressure
1.0mm 2.0mm
07
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Blue Visual
Thickness (mm) 0.30~8.0 ----
Hardness (Shore 00) 40 ASTM D2240
Density (g/cc) 3.0 ASTM D792
Tensile Strength (Psi) 35 ASTM D412
Elongation (%) 85% ASTM D412
Percent Deflection@ 3mm, 60psi 40% ASTM D575
Continuous Use Temp ( ) -60 to 200 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 250 ASTM D149
Dielectric Constant (1MHz) 5.5 ASTM D150
Volume Impedance (ohm-cm) 3 x1012 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 3.0 ASTM D5470
Configurations Available:
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s)
or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user
should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any
given situation.
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
3.00 W/mk thermal conductivity
Low Thermal Resistance at Low Pressure
Naturally tacky for easy application
Between heat-generation Conponment and and heatsink.
Led Solid State Lighting, Graphices Cards, Telecom device.
Wireless communication hardware
Cooling Module, Thermal module.
High Power supply/conversion
TYPICAL PROPERTIES OF TCP300
FLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
SINOGUIDE TECHNOLOGY LIMITED
Technical Data Sheet
TCP300 Series Thermal Conductive Pad
Sheet size:200 x 400mm, 350x350mm , individual parts available
0
0.25
0.5
0.75
1
Th
erm
al
Re
sist
an
ce
(C-i
n2
/w)
Pressure (psi)
Thermal Resistance VS Pressure
1.0mm 2.0mm
0%
20%
40%
60%
80%
De
ec
on
(%
)
Pressure (psi)
De ec on VS Pressure
1.0mm 2.0mm
08
TCP500 Series Thermal Conductive Pad
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Violet Visual
Thickness (mm) 0.3~8.0 ----
Hardness (Shore 00) 45 ASTM D2240
Density (g/cc) 3.2 ASTM D792
Tensile Strength (Psi) 9 ASTM D412
Elongation (%) 20% ASTM D412
Percent Deflection@ 2mm, 20psi 25% ASTM D575
Continuous Use Temp ( ) -60 to 200 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 200 ASTM D149
Dielectric Constant (1MHz) 5 ASTM D150
Volume Impedance (ohm-cm) 1 x1013 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 5.0 ASTM D5470
Configurations Available:
Sheet size:200 x 400mm, 350x350mm , individual parts available
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s)
or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user
should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any
given situation.
5.00 W/mk thermal conductivity
Premium Thermal Pad, Low Thermal Resistance
No additional adhesive is required
Between heat-generation Conponment and and heatsink.
High-end Set Top Box, Graphices Cards, Telecom device.
Wireless communication hardware
Cooling Module, Thermal module.
Server S-RAMs, BGA packages
TYPICAL PROPERTIES OF TCP500
0
0.2
0.4
0.6
Th
erm
al
Imp
ed
an
ce
(C-i
n2
/w)
Pressure (psi)
Thermal Resistance VS Pressure
1.0mm 2.0mm
0%
20%
40%
60%
80%
De
ec
on
, %
Pressure (psi)
De ec on VS Pressure
1.0mm 2.0mm
09
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Grey Visual
Thickness (mm) 0.5~5.0 ----
Hardness (Shore 00) 60 ASTM D2240
Density (g/cc) 3.2 ASTM D792
Tensile Strength (Psi) 7.5 ASTM D412
Elongation (%) 13% ASTM D412
Percent Deflection@ 2mm, 20psi 15% ASTM D575
Continuous Use Temp ( ) -60 to 200 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 280 ASTM D149
Dielectric Constant (1MHz) 6.8 ASTM D150
Volume Impedance (ohm-cm) 4.9 x1010 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 8.0 ASTM D5470
Configurations Available:
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s)
or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user
should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any
given situation.
8.0 W/mk high thermal conductivity
Low Thermal Resistance at Low Pressure
Naturally tacky for easy application
Between heat-generation Conponment and and heatsink.
Automotive engine control, Graphic Cards, Telecom device.
Wireless Hub,Military equipment, power supply.
Cooling Module, Thermal module.
Telecommunication Hardware
TYPICAL PROPERTIES OF TCP800
Sheet size:200 x 400mm, 350x350mm , individual parts available
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
TCP800 Series Thermal Conductive Pad
0
0.2
0.4
0.6
Th
erm
al
Imp
ed
an
ce
(C-i
n2
/w)
Pressure (psi)
Thermal Resistance VS Pressure
1.0mm 2.0mm
0%
20%
40%
60%
De
ec
on
, %
Pressure (psi)
De ec on VS Pressure
1.0mm 2.0mm
10
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Ash Grey Visual
Thickness (mm) 0.5~5.0 ----
Hardness (Shore 00) 60 ASTM D2240
Density (g/cc) 3.4 ASTM D792
Tensile Strength (Psi) 6.8 ASTM D412
Elongation (%) 12% ASTM D412
Percent Deflection@ 2mm, 20psi 14.5% ASTM D575
Continuous Use Temp ( ) -40 to 250 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 280 ASTM D149
Dielectric Constant (1MHz) 7.2 ASTM D150
Volume Impedance (ohm-cm) 4.2 x1010 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 12.0 ASTM D5470
Configurations Available:
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s)
or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user
should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any
given situation.
12.0 W/mk ultra high thermal conductivity
Excellent Thermal Performance at Low Pressure
Naturally tacky for easy application
Between heat-generation Component and and heatsink.
CD ROM / DVD ROM
Memory packages / modules, PC board to chassis
Cooling Module, Thermal module.
Telecommunication Hardware
TYPICAL PROPERTIES OF TCP1200
Sheet size:200 x 400mm, 350x350mm , individual parts available
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
TCP1200 Series Thermal Conductive Pad
0
0.2
0.4
0.6
Th
erm
al
Imp
ed
an
ce
(C-i
n2
/w)
Pressure (psi)
Thermal Resistance VS Pressure
1.0mm 2.0mm
0%
20%
40%
60%
De
ec
on
, %
Pressure (psi)
De ec on VS Pressure
1.0mm 2.0mm
11
TCP150AB Series Thermal Conductive Absorber
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Dark Gray Visual
Thickness (mm) 0.30~3.5 ----
Hardness (Shore 00) 60 ASTM D2240
Density (g/cm3) 3.00 ASTM D792
Continuous Use Temp ( ) -45 to 140 EN344
Tensile Strength (MPa) 0.2 ASTM D412
Elongation (%) 8 ASTM D412
Electromagnetic
8+/-20%,(U') @1MHz
3.5+/-20%,(U') @1MHz
2+/-20%,(U') @1MHz
1.0mm, 20%
2.0mm, 23%
3.0mm, 26%
Surface Resistivity (ohm-cm) > 1.0 x1012 ASTM D257
THERMAL
Thermal Conductivity (W/m.k) 1.5 ASTM D5470
Configurations Available:
Sheet size:200 x 400mm, 350x350mm , individual parts available
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or of
any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should
perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any given situation.
Set-Top Box, Gateway
LED/LCD TV, Led lighting, Telecom device.
Network Router/Adapter
Vehicle-interlligence Terminal
TYPICAL PROPERTIES OF TCP150AB
Permeability Agilent E4991A
Power Loss @1GHz
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-89375091 Fax +86-755-89375092
Technical Data Sheet
1.50 W/mk thermal conductivity
Low Hardness Thermal Conductive Absorber
Easy assembly and application
12
Design Guide For 3D Mould Thermal Conductive Pad
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
Color Gray, Green Visual
Min Thickness (mm) 0.30mm ----
Hardness (Shore C) 40, 55 ASTM D2240
Density (g/cm3) >2.7 ASTM D792
Elongation (%) >40% ASTM D412
Continuous Use Temp ( ) -50 to 200 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 250 ASTM D149
Dielectric Constant (1MHz) 5.5 ASTM D150
Volume Impedance (ohm-cm) >5 x1013 ASTM D257
Flame Rating V 0 UL 94
THERMAL
Thermal Conductivity (W/m.k) 2.0, 5.0, 6.0 ASTM D5470
Configurations Available:
Mobile phone, Set-Top Box, Power Modules/Supply
Telecom device.
Network Router/Adapter
Vehicle-interlligence Terminal
TYPICAL PROPERTIES OF 3D Mould
Customized parts, 3D drawing is required
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not
assume any responsibility or liability for any advice furnished by it, or for the performance or results of any
installation or use of the product(s) or of any final products into which the product(s) may be incorporated by the
purchaser and/or user. The purchaser and/or user should perform its own tests to determine the suitability and
fitness of the product (s) for the particular purpose desired in any given situation.
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-89375091 Fax +86-755-89375092
Technical Data Sheet
Various thermal conductivity
Customerize thermal Pad for perfect compliance
Easy assembly and application
13
Features:
Applications:
Part Number AL20 AL50 AL60
Construction & Composition
Color Black Black Black
Thickness (mm) 0.50-3.0 0.30-3.0 1.0-3.0
Hardness (Shore A) 20 50 30
Density (g/cc) 2.4 2.4 2.4
Continuous Use Temp ( ) -60 to 200 -60 to 200 -60 to 200
ELECTRICAL
Dielectric Breakdown Voltage
(VAC/mil)100 100 100
Withstand Voltage (Vac) 100 100 100
Volume Impedance (ohm-cm) <500 <500 <500
Flame Rating VO VO VO
THERMAL
Specific Heat Capacity 0.87 J/g-k 0.87 J/g-k 0.87 J/g-k
Thermal Mass 2088 kj/m3-k 2088 kj/m3-k 2088 kj/m3-k
Thermal Conductivity (W/m.k) 35 50 60
Configurations Available:
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
Premium Thermal Conductive Pad
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume
any responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of
the product(s) or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The
purchaser and/or user should perform its own tests to determine the suitability and fitness of the product (s) for the
particular purpose desired in any given situation.
35 and 50 W/mk Outstanding Thermal Conductivity
Carbon Fiber Filled,High Stability and Suitable For Extreme Enviroment
Non- tacky and good rebound for easy applicaiton
Between heat-generation Component and and heatsink.
Highly Stable at extreme Temperature
Required for outstanding heating transfer
Cooling module, thermal module for special application
TYPICAL PROPERTIES OF Premium Thermal Conductive Pad
Sheet size:140 x 140mm , individual parts available
Silicone Elastomer with Carbon Fiber Alignment
14
Features:
Applications:
PROPERTY TCP300SF TCP500SF TEST METHOD
Color Light Grey Dark Grey Visual
Thickness (mm) 1.0-3.0 1.0-3.0 ----
Hardness (Shore 00) 45 60 ASTM D2240
Density (g/cc) 2.92 3.30 ASTM D792
Tensile Strength (Psi) 6.5 5.2 ASTM D412
Elongation (%) 13% 10% ASTM D412
Percent Deflection@ 2mm, 20psi 18% 14% ASTM D575
Continuous Use Temp ( ) -40 to 125 -40 to 125 EN344
ELECTRICAL
Breakdown Voltage (VAC/mil) 180 180 ASTM D149
Dielectric Constant (1MHz) 12.6 12.6 ASTM D150
Volume Impedance (ohm-cm) 1.0 x1013 1.0 x1013 ASTM D257
ROHS & REACH IEC 62321 & EN14372
Flame Rating UL 94
THERMAL
Thermal Conductivity (W/m.k) 3.0 5.0 ASTM D5470
Configurations Available:
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any responsibility
or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or of any final
products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its
own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any given situation.
3.0 W/mk high thermal conductivity
Low Thermal Resistance at Low Pressure
Naturally tacky for easy application
Non-Silicone & no oil bleeding issue
Between heat-generation Conponment and and heatsink.
Automotive engine control, Graphices Cards, Telecom device.
Wireless Hub,Military equipment, power supply.
Optical devices, Surveillance cameras
Telecommunication Hardware
TYPICAL PROPERTIES OF TCP-SF Series
Sheet size:200 x 400mm, 350x350mm , individual parts available
In Compliance
VO in compliance
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
TCP-SF Series Non-silicone Thermal Conductive Pad
15
Features:
Applications:
PROPERTY TCP 300-PC TCP 500-PC TEST METHOD
Structure & Composition Filled elastomer Filled elastomer --
Color Grey Grey Visual
Thickness, mm 0.12-0.5 0.12-0.5 ASTM D374
Phase change temperature, °C 45-60 50-60 --
Density, g/cc 2.3 2.5 ASTM D792
Continuous Use Temp, °C EN344
ELECTRICAL
Breakdown Voltage,KV/mm 6.0 <1.0 ASTM D149
Dielectric Constant, 1MHz 3.2 6.8 ASTM D150
Volume Impedance, ohm-cm 1.0*1013 1.0*102 ASTM D257
ROHS & REACH IEC 62321 & EN14372
Flame Rating UL94 V0
THERMAL
Thermal conductivity, W/m.K 3.0 5.0 ASTM D5470
Configurations Available:
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
-40 - 130
TCP-PC Series Thermal Phase Change Material
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the
product(s) or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser
and/or user should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose
desired in any given situation.
3.0-5.0 W/mk thermal conductivity
Ultra low thermal resistance under low pressure
Naturally tacky on both sides
Easy for assembly
Between electronic components such as Semiconductor, IC, CPU.MOS and heatsink.
Led Lighting, LCD TV, Telecom device.
Computer peripherals for CPU, Memory modules
Military Electronics
TYPICAL PROPERTIES OF TCP-PC Series
Sheet size:300 x 400mm, individual die-cut parts available with removal tabs optional
In compliance
In compliance
16
Features:
Applications:
PROPERTY TCP300P TCP600P TCP900P TEST METHOD
Color Blue Dark Red Dark Grey Visual
Flow rate, 30cc syringe with no tip
attachment 0.100" orifice, 90 psi20g/min 10g/min 12g/min ----
Density (g/cc) 3.2 3.30 3.4 ASTM D792
Percent Deflection@ 3mm, 60psi 70% 65% 62% ASTM D575
Minimum Bondline Thickness, mm 0.10 0.13 0.13 ----
Continuous Use Temp ( ) -40 to 200 -40 to 250 -40 to 250 EN344
ELECTRICAL
Breakdown Voltage (KV/mm) 6.0 5.0 0.1 ASTM D149
Dielectric Constant (1MHz) 6 5.8 1.1 ASTM D150
Volume Impedance (ohm-cm) 1.2 x105 1.0 x103 1.0 x101 ASTM D257
Flame Rating V 0 V 0 V 0 UL 94
Outgassing, % TML(CVCM) 0.076% (0.016%) -- -- ASTM E595
Shelf Life,
months from manufacturing date24 24 24 ----
THERMAL
Thermal Conductivity (W/m.k) 3.5 6.0 9.0 ASTM D5470
Configurations Available:
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any responsibility or
liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or of any final products into
which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to
determine the suitability and fitness of the product (s) for the particular purpose desired in any given situation.
3.50-9.0 W/mk thermal conductivity
Low Thermal Resistance at Low Pressure
Never dry out, Ultra-Low Out-gassing
Excellent thixotrophy to well conform with irregular gaps
Available for auto-dispensing and screen printing applications
Network Equipement, Mass Storage devices
Industrial Automation, Telecom device.
Smart TV stick, Wireless Hub
Power conversion equipments, power inverters/supply
Wireless communication hardware / Automotives
TYPICAL PROPERTIES OF TCP-P Series
300cc / 1000cc syringe packaging available or customized packaging per your request
Recommended storage conditions: keep in dry and shade place, storage under 30°C / 50% RH.
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
TCP-P Series Thermal Conductive Putty
17
Features:
Applications:
PROPERTY TCG4000 TCG5000 TEST METHOD
Carbon Content, % 99.7 99.5 JB/T 9141.6-1999
Chloride Content, ppm 35 26 JB/T 7758.4-2008
Sulfur Content, ppm 800 1000 JB/T 7758.3-2008
Thickness, mm 0.15 / 0.25 / 0.50mm 0.15 / 0.25 / 0.50mm ASTM D374
Tensile Strength, Mpa 4.3 4.8 JB/T 9141.8-1999
Compression set, % 25-35 20-28 --
Density, g/cc 1.32 1.5 ASTM D792
Continuous Use Temp, °C -60 - 300 -60 - 300 EN344
RoHS / Halogen-free In compliance SGS
ELECTRICAL
Electrical Resistance (X-Y axis) 8 -m 10.2 -m ASTM D257
Electrical Resistance (Z axis) 310 -m 360 -m ASTM D257
RoHS / Halogen-free In compliance In compliance SGS
THERMAL
Thermal conductivity (X-Y axis), W/m.K 420.0 600.0 ASTM E1461
4.8 5.5 ASTM D5470
5.5 7.0 ASTM E1461
Configurations Available:
100% Pure Graphite
Ultra high thermal conductivity with very low thermal contact resistance
Halogen free and RoHS in compliance
High thermal performance in X-Y axis and Y axis simultaneously
Digital camera, Digital video camera
Chipsets, memory chips, micro BGA
Smart phones, laptops
LED back light, PDP/LCD/OLED screens, Ultra bright LED etc.
TYPICAL PROPERTIES OF TCG Series
Standard Roll size:1000mm * 50M, individual die-cut parts available
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any responsibility or
liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or of any final products into
which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to determine
the suitability and fitness of the product (s) for the particular purpose desired in any given situation.
Thermal conductivity (Z axis), W/m.K
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
TCG Series Thermal & Electrical Conductive Graphite
18
Features:
Applications:
TCP-160 TCP-I160F TCP-K10 TEST METHOD
Pink Black Beige Visual
0.23, 0.30, 0.45 0.2-0.8 0.16±0.025 --
Fiberglass Fiberglass Polyimide(Kapton) ASTM D374
80 80 85±5 ASTM D2240
Density, g/cc 2.3 2.5 2.6 ASTM D792
60 60 300 ASTM D412
-40 to 200 -40 to 200 -60 to 200 EN344
4.8 5.0 6.5 ASTM D149
60Hz 3.6 6.6 0.010
100Hz 3.6 6.6 0.007
1 MHz 3.5 6.6 0.005
1x107 1.2x107 1x1015 ASTM D257
UL 94
IEC 62321 & EN14372
1.6 1.6 1.3 ASTM E1461
Configurations Available:
ASTM D150
Volume Impedance, ohm-cm
Thermal conductivity, W/m.K
Flame Rating
RoHS & REACH
V0
In Compliance
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any
responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s)
or of any final products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user
should perform its own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any
given situation.
Dielectric Constant,
PROPERTY
Color
Thickness, mm
Carrier
Hardness, Shore A
Tensile Strength, kg/cm2
Continuous Use Temp, °C
Breakdown Voltage, KVac
1.3-1.6 W/mk Thermal Conductivity
Low Thermal Resistance at Low Pressure
Halogen free and RoHS in compliance
Excellent electrically insulating mounted applications
Between high power component (such as MOSFET) and
a heatsink for screw and clip mounted application
DC/AC Inverter, Power Supply
Photovoltaic Power System
TYPICAL PROPERTIES OF TCP-I Series
Standard Roll size:200 x 400mm, Roll: 300mm * 50M, individual die-cut parts available
ELECTRICAL
THERMAL
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
TCP-I Series Thermal Conductive Insulator
FG/PI Carrier
19
Features:
Applications:
PROPERTY TCP100G TCP300G TCP500G TEST METHOD
Color Grey Grey Grey Visual
Density (g/cc) 2.5 2.6 2.8 ----
Viscosity, kcps@25 1850 2350 2150 Brookfield Rvf#7
Evaporation, 200 @ 24 hrs 0.15% 0.18% 0.15% ----
Continuous Use Temp ( ) EN344
THERMAL
Thermal Resistance @50psi,
-in2/W0.021 0.014 0.009 ASTM D5470
Thermal Conductivity (W/m.k) 1.0 3.0 5.0 ASTM D5470
Shelf life
Configurations Available:
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
TCP-G Series Thermal Conductive Paste / Grease
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any responsibility or
liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or of any final products into
which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to
determine the suitability and fitness of the product (s) for the particular purpose desired in any given situation.
-40 to 200
2 years from the date of manufacture @ 25
Low thermal resistance at low pressure
High conformability and cost effective
Never dry out
Excellent reliability
Suitable for auto-dispensing and screen printing applications
LED lightings, LCD-TV
Graphic chips, CPU, GPU, memory modules
Power supplies, power conversion equipment
Automotive control modules, telecom devices etc.
TYPICAL PROPERTIES OF TCP-G Series
1kg / 2kg / 10kg per plastic can packaging available or customized packaging per your request
20
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
UNCURED CONDITION
Color Grey Visual
Conductive particles Ni/C ----
Density, g/cm3 1.9±0.25 ASTMD792
CURED CONDITION
Hardness, Shore A 65±7 ASTM D2240
Adhesion, N 12.00 /
Shielding Effectiveness
(300 MHz - 10 GHz)> 80 dB
Modified
IEEE-299
Volume resistivity, m 0.02 MIL-DTL-83528C
Compression ratio 30% ASTM D395 Method B
Elongation at break, % 150 ASTM D412
STORAGE CONDITION
Storage temperature -20°C /
Shelf life 3 Months /
Standard packaging Available:
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-89375091 Fax +86-755-89375092
Technical Data Sheet
EA600 Series One-component RTV Electric Conductive Silicone Rubber
80g/tube; 400g/tube or customized packaging available
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not
assume any responsibility or liability for any advice furnished by it, or for the performance or results of any
installation or use of the product(s) or of any final products into which the product(s) may be incorporated by the
purchaser and/or user. The purchaser and/or user should perform its own tests to determine the suitability and
fitness of the product (s) for the particular purpose desired in any given situation.
Excellent flexibility and electric conductivity
One-component RTV conductive silicone
24hrs cured at room temperature
Communication equipment
Base stations
Mobile phones
portable test and calibration equipment
TYPICAL PROPERTIES OF EA600
21
Features:
Applications:
PROPERTY METRIC VALUE TEST METHOD
UNCURED CONDITION
Color Silver White Visual
Conductive particles Ag/Cu ----
Density, g/cm3 2.3±0.25 ASTMD792
CURED CONDITION
Hardness, Shore A 50±7 ASTM D2240
Adhesion, N 12.00 /
Shielding Effectiveness
(300 MHz - 10 GHz)> 90 dB
Modified
IEEE-299
Volume resistivity, m 0.005 MIL-DTL-83528C
Compression ratio 30% ASTM D395 Method B
Elongation at break, % 150 ASTM D412
STORAGE CONDITION
Storage temperature -20°C /
Shelf life 2 Months /
Standard packaging Available:
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-89375091 Fax +86-755-89375092
Technical Data Sheet
EA800 Series One-component RTV Electric Conductive Silicone Rubber
80g/tube; 400g/tube or customized ackaging available
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not
assume any responsibility or liability for any advice furnished by it, or for the performance or results of any
installation or use of the product(s) or of any final products into which the product(s) may be incorporated by the
purchaser and/or user. The purchaser and/or user should perform its own tests to determine the suitability and
fitness of the product (s) for the particular purpose desired in any given situation.
Excellent flexibility and electric conductivity
One-component RTV conductive silicone
24hrs cured at room temperature
Communication equipment
Base stations
Mobile phones
portable test and calibration equipment
TYPICAL PROPERTIES OF EA800
22
Test standard
Visual
Visual
1.0mm >1.0mm --
0.07 0.09 ASTM D257
JIS-K-6400.11 #B
MIL-STD-202G
Method 307
GB 6669-2008
--
GB/T 2792
GB/T2792-1998
MIL-DTL-83528C
Long duration: -20 70 ;
Short period: -40 120
1.32
80 dB (10MHZ-3GHZ)
Configurations Available:
Customed shapes and Individual die-cut parts available
Working temperature
Silver Grey
>0.35
Surface Resistance ( /in2) 0.048
Compression ratio, % 4% - 25%
Z axis Resistance ( )
Density (kg/cm3)
Good compressibility and reboundance to fill the irregular gaps perfectly
Optional with a laminated conductive PSA tape for easy application
Halogen free and RoHS in compliance
Premium EMI shielding performance
Applications:
Low-cycling applications like I/O shielding and other non-shear standard connectors.
Network and Telecommunication Equipment
Printers, desktop computers
LCD and Plasma TV, Servers etc.
TYPICAL PROPERTIES OF CF010
Metric Value
Conductive Fabric + PU Foam + Conductive Adhesive
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
CF010 Series Conductive Fabric-Over-Foam
Features:
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any responsibility
or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or of any final
products into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its
own tests to determine the suitability and fitness of the product (s) for the particular purpose desired in any given situation.
Adhesion strength, kgf/inch
Property
Structure
Thickness (mm)
Holding force, hrs
Shielding Effectiveness
Color
Conduc ve Fabric
PU Foam
Conduc ve PSA
0
20
40
60
80
100
120
30M 300M 1G 1.8G 3.0G 10G 18G
Shie
ldin
g e
ffectiv
enes
s, d
B
Frequency, Mhz
Shielding effectiveness
23
Test standard
Visual
--
0.5 1 1.5 2 2.5 3 3.5 4 --
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 GB/T 30139
0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 ASTM D257
@20% 0.095 0.081 0.085 0.091 0.076 0.064 0.067 0.095
@50% 0.042 0.044 0.039 0.041 0.038 0.034 0.03 0.042
--
GB/T 2792
GB/T2792-1998
MIL-DTL-83528C
SINOGUIDE TECHNOLOGY LIMITEDFLAT/RM 01 21/F PROSPER COMMERCIAL BUILDING 9 YIN CHONG STREET KOWLOON HONGKONG
Block A,No 3, Zhonghe Street, Pinghu Town, Longgang District, Shenzhen,China
Tel +86-755-8937 5091 Fax +86-755-8937 5092
Technical Data Sheet
CF040 Series Conductive Fabric-Over-Foam
Features:
X, Y, and Z-axis conductivity for all-direction shielding and grounding
Laminating with a conductive PSA tape on one side for easy application
Halogen free and RoHS in compliance
Premium EMI shielding performance
Applications:
Low-cycling applications like I/O shielding and other non-shear standard connectors.
Network and Telecommunication Equipment
Printers, desktop computers
LCD and Plasma TV, Servers etc.
TYPICAL PROPERTIES OF CF040
Property Metric Value
Color Grey
PSA Carrier Conductive Fabric
Thickness, mm
X-Y axis Resistance
Z axis Resistance
Resistance ( )
@ compression set--
Working temperatureLong duration: -20 70 ;
Short period: -40 120
Adhesion strength, kgf/inch 1.0
Holding force 24Hrs
Shielding Effectiveness 60 dB (10MHZ-3GHZ)
Configurations Available:
Standard Roll size:1000mm * 50M, individual die-cut parts available
Any information contained herein is believed to be accurate and reliable. SinoGuide and its agents does not assume any responsibility or
liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or of any final products
into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to
determine the suitability and fitness of the product (s) for the particular purpose desired in any given situation.
Conduc ve Foam
PSAConduc ve Fabric
PSARelease Liner
0
20
40
60
80
100
120
140
30M 300M 1G 5G 10G
Shie
ldin
g e
ffectiv
enes
s, d
B
Frequency, Mhz
Shielding effectiveness