Registration(Sep. 15th, 2009- Sep. 16th, 2009)

Name： Title：

Firm：

Address：

Tel： Fax：

Email：

signature： Date：

Which session would you participate ？session1 session2 session3

Each full registration fee, US $60 / EUR €50 or RMB ￥ 400, includes one copy of printed speech script , as well as the reception, banquet and coffee breaks.

Contact

Guo Hongwei

Email: hongwei_guo@smtcl.comTel : 024-25190958 13840185653

Location Shenyang Machine Tool Co., Ltd

No. 117-A Kaifa Avenue, Shenyang Economic & Technological Development Zone

It will takes you 40-50 minutes from airport (app. 40 km) to symposium location by taxi.

Railway Station Transfers

It will takes you 20-25 minutes from railway station (app. 14 km) to symposium location by taxi.

Organizing Committee:People's Republic of China Ministry of Science and

TechnologyThe Federal Republic of Germany Ministry of Education and

Research

Conference Sponsor：Shenyang Machine Tool Co., Ltd

Co-organizor :Tongji University, Ruhr University BochumZhejiang University, Aachen University of TechnologyNanjing University of Aeronautics and Astronautics,

Darmstadt University of Technology

General Co-Chairs ：Jijun Xing ， International Cooperation Department, Ministry

of Science and Technology, China XXX, Germany Ministry of Education and Research ,

Germany

Program Committee：Chunshi Liu, Director, SMTCL, ChinaProf. Dr. Robert Schmitt , Aachen University of Technology ,

GermanyProf. Dr. Eberhard Abele, Darmstadt University of

Technology, GermanyProf. Dr. Horst Meier, Ruhr University Bochum, Germany Prof. Qi Guoning , Zhejiang University, China Prof. Dr. Weimin Zhang, Tongji University ,ChinaProf. Dr. Ning He, Nanjing University of Aeronautics and

Astronautics, China

Activity of Sino-German Science and Education Year

13:30Investigation report on application of advanced machine tools and cutting toolsProf. Tumis , （ CDHK Tongji University）

13:45High-performance processing technologies of aircraft partsChengdu Aircraft Industrial (Group)Co.,Ltd.(CAC)

14:05The application of high-performance processing technologies in GermanyGerman company , e.g. LMT, Bliss

14:25Measuring standards for high-performance processingHohenstein, Dr. Li Liang (PTW & NUAA)

14:40 Coffer Break

15:10Difficult-to-machine materials processing in high-performance cooling and lubrication technologyZhao Wei ， Sieber (NUAA&PTW)

15:35Process knowledge management and knowledge integration of high-performance processingAlbrecht, Dr. Xie Qiang ( PTW&NUAA)

16:00 Discussion

IntroductionOn the 14th Conference of Sino-German manufacturing technology Steering Committee, the following three projects were established: ①SML based integrated system for product collaborative design, manufacturing and measuring. ②Network oriented high-performance cutting technologies and applications.③Unfolding Technology Lead in Sino-German Cooperation – Cooperatively Provided Services as Enabler for the Optimal Operation of Complex Machine Tools.To enhance the Sino-German cooperation and communication on manufacturing technological field and display the cooperative achievements, the “Sino-German Advanced Manufacturing Technology Symposium” will be hold on Sep. 15th-16th, 2009, at Shenyang, China. This symposium has been listed as one of activities in “Sino-German Science and Education Year”. The symposium is jointly sponsored by Ministry of Science and Technology of People's Republic of China (MOST) and Ministry of Education and Research of Germany (BMBF) and Shenyang Machine Tool (Group) Co. Ltd (SMTCL).It a great honor for us to invite some well-known experts and they will give academic reports on the symposium: Prof. Dr. Eckart Uhlmann, chair of the world famous Fraunhofer-Institute for Production Systems and Design Technology of Berlin; Academician Lu Bingheng, chief of “National key laboratory of advanced NC machine tool” for SMTCL; Prof. Dr. Horst Meier, chair of Department of Mechanical Engineering of Ruhr University; Prof. Dr. Eberhard Abele, chair of Production Management, Technology and Machine Tools (PTW) of Darmstadt University of Technology; Dr. Reinhard Freudenberg, general engineer of Aachen Fraunhofer-Institute for manufacturing technology. Warm welcome to all the Chinese and German enterprises, scientific research institutions and High school to participate this symposium and to promote the Sino-German cooperation in science and technology through Sino-German advanced technological communication platform.

13:30A new service mode to improve reliability of complex machine tools –cooperative serviceProf. Zhang Weimin （ Tongji University）

14:00How to develop the after sales service business in china successfullyMichael Kroll （ Ruhr University Bochum）

14:30Application of Co-service in Shenyang Machine Tools Co. Ltd.Liu Chunshi （ SMTCL）

15:00 Coffer Break

15:30Supply Chain Management for the Global Distribution of Machine Life cycle based ServiceGu Rongxin （ Ruhr University Bochum）

16:00 Discussion

13:30Integrated production metrology - effective support for high-end products manufacturingDr. Freudenberg (WZL)

13:55Application of metrology in machine tools manufacturingDr. Zhang Ming (Körber Schleifring)

14:20MES and manufacturing process visualizationProf. Liu Xiaobing (Dalian University of Technology)

14:45 Coffer Break

15:10Consistent measuring process chain - from design to quality inspectionNiels König (IPT)

15:35Improving NC machine tool efficiency by CAM/CNC integrationMr. Cai Bo (Simens PLM)

16:00 Discussion